A
A
(4.78)
.188
No. of positions x (1.27) .050
A
No. of positions x (1.27) .050 + Z
No. of positions x (1.27) .050 + Z
(5.64)
.222
(2.92)
.115
SPECIFICATIONS
Insulator Material:
Black Liquid Crystal Polymer
Terminal Material:
Phosphor Bronze
Plating:
Sn or Au over
50 µ" (1.27 µm) Ni
Current Rating (FTSH/CLP):
3.4 A per pin
(2 pins powered)
Operating Temp Range:
-55 °C to +125 °C
PROCESSING
Lead-Free Solderable:
Yes
SMT Lead Coplanarity:
–MT & –DV Tail Option:
(0.10 mm) .004" max (02-25)
–MT & –DH Tail Option:
(0.15 mm) .006" max (26-50)*
*(.004" stencil solution
may be available; contact
IPG@samtec.com)
EXTENDED LIFE
PRODUCT
10 YEAR MFG
WITH 30 µ" GOLD
HIGH MATING
CYCLES
FTSH
Board Mates:
CLP, FLE
Cable Mates:
FFSD, FFTP
Notes:
Some sizes, styles and
options are non-standard,
non-returnable.
See SFM/TFM for positive
alignment feature.
—MT
(Styles –01, —02 & —04 only)
–DV
—EJ OPTION SHOWN
—EJ—EL
—EC
—ES —P
—K —A
—DH
(Styles —01, —02, —04 only)
—EP
LEAD
STYLE A
–01 (3.05)
.12 0
–02 (1.91)
.075
–03 (1.65)
.065
–04 (3.81)
.15 0
–05 (4.32)
.170
Molded Pick & Place pads
Latches
Other platings
ALSO AVAILABLE
MOQ Required
—EX OPTION SHOWN
OPTION Z
–ES ( 2.57 ) .101
–EJ (15.77) .621
–EC (3.33) .131
–EP (5.87) .231
–EL (6.53) .257
SURFACE MOUNT
MICRO HEADER
(1.27 mm) .050" PITCH • FTSH SERIES
FTSH -1NO. PINS
PER ROW -LEAD
STYLE -PLATING
OPTION -TAIL
OPTION -OPTION -FLEX SHROUD
OPTIONS -OTHER
OPTIONS
02
thru
50
–01
= (3.05 mm)
.120" Post
(Mates with
FFSD)
–02
= (1.91 mm)
.075" Post
(Mates with
FLE)
–03
= (1.65 mm)
.065" Post
(Mates with
CLP–D)
–04
= (3.81 mm)
.150" Post
(Mates with
CLP-DH)
–05
= (4.32 mm)
.170" Post
(Mates with
CLP–BE)
–F
= Gold ash
on post,
Matte Tin
on tail
–L
= 10 µ"
(0.25 µm)
Gold
on post,
Matte Tin
on tail
–DV
= Double
Vertical
–DH
= Double
Horizontal
(Styles
–01, –02 &
–04 only)
–MT
= Mixed
Technology
(Styles
–01, –02 &
–04 only)
Leave Blank
for -DH &
-MT
–“XXX”
= Polarized
Position
(Specify
position
of
omitted
pin)
(Not
available
with -EX
options)
(Style –02 & –03
only, –DH & –MT
not available)
9 pins/row
minimum
(Other positions
available. Call
Samtec.)
–ES
= End Shroud
–EC
= End Shroud
with Locking Clip
(Manual
placement
required)
–EP
= End Shroud
with Guide Post
–EL
= End Shroud with
Board Lock
(Boards are
positively locked
and cannot be
unmated)
–EJ
= Ejector Shroud
(Style –01 only)
–DH & –MT
not available
10 pins/row
minimum
25 pins/row
maximum
–K
= Keying
Shroud
(For mating
with FFSD
Style –01 only
and 05, 08, 10,
13, 15, 17,
20 & 25
pins/row only.
13, 17, 20 & 25
pins/row only
with –EJ option)
(–DV only)
–A
= Alignment
Pin
(–DV 3 positions
minimum)
(–DH 5 positions
minimum)
(Metal or
plastic at
Samtec
discretion)
–C
= (5.00 mm)
.197" DIA
Polyimide lm
Pick & Place Pad
(–DH only)
–P
= Pick &
Place Pad
(–DV 4 positions
minimum)
(–DH & –MT
not available)
–TR
= Tape & Reel
(Flex Shroud
options
not available
except –ES
& –EJ)
–FR
= Full Reel
Tape & Reel
(must order
maximum
quantity
per reel;
contact
Samtec for
quantity breaks)
samtec.com?FTSH
Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specications which are subject to change without notice.
Gbps
8
F-221
