SURFACE MOUNT MICRO HEADER 8 G b p s (1.27 mm) .050" PITCH * FTSH SERIES FTSH Board Mates: CLP, FLE Cable Mates: FFSD, FFTP FTSH -1 NO. PINS PER ROW 02 thru 50 SPECIFICATIONS Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Current Rating (FTSH/CLP): 3.4 A per pin (2 pins powered) Operating Temp Range: -55 C to +125 C - LEAD STYLE - -01 PLATING OPTION -F = (3.05 mm) .120" Post (Mates with FFSD) = Gold flash on post, Matte Tin on tail -02 -L = (1.91 mm) .075" Post (Mates with FLE) -03 = (1.65 mm) .065" Post (Mates with CLP-D) - = 10 " (0.25 m) Gold on post, Matte Tin on tail -DV Leave Blank for -DH & -MT -DH -"XXX" = Double Vertical = Double Horizontal (Styles -01, -02 & -04 only) -MT = Mixed Technology (Styles -01, -02 & -04 only) - = Polarized Position (Specify position of omitted pin) (Not available with -EX options) FLEX SHROUD OPTIONS -ES = End Shroud -EC = End Shroud with Locking Clip (Manual placement required) -EP = End Shroud with Guide Post -EL -05 = (4.32 mm) .170" Post (Mates with CLP-BE) OPTION No. of positions x (1.27) .050 + Z ALSO AVAILABLE (4.78) .188 MOQ Required Molded Pick & Place pads Latches Other platings - (Style -02 & -03 only, -DH & -MT not available) 9 pins/row minimum (Other positions available. Call Samtec.) = (3.81 mm) .150" Post (Mates with CLP-DH) Lead-Free Solderable: Yes SMT Lead Coplanarity: -MT & -DV Tail Option: (0.10 mm) .004" max (02-25) -MT & -DH Tail Option: (0.15 mm) .006" max (26-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) = End Shroud with Board Lock (Boards are positively locked and cannot be unmated) Z -ES (2.57) .101 -EJ (15.77) .621 -EC (3.33) .131 -EP (5.87) .231 -EL (6.53) .257 -EJ = Ejector Shroud (Style -01 only) -DH & -MT not available 10 pins/row minimum 25 pins/row maximum --EX OPTION SHOWN No. of positions x (1.27) .050 + Z --EJ OPTION SHOWN EXTENDED LIFE PRODUCT A A (2.92) .115 HIGH MATING CYCLES -DV --ES --EC --EP A --MT (Styles -01, --02 & --04 only) No. of positions x (1.27) .050 10 YEAR MFG WITH 30 " GOLD OTHER OPTIONS -K = Keying Shroud (For mating with FFSD Style -01 only and 05, 08, 10, 13, 15, 17, 20 & 25 pins/row only. 13, 17, 20 & 25 pins/row only with -EJ option) (-DV only) -A = Alignment Pin (-DV 3 positions minimum) (-DH 5 positions minimum) (Metal or plastic at Samtec discretion) -C = (5.00 mm) .197" DIA Polyimide film Pick & Place Pad (-DH only) -P = Pick & Place Pad (-DV 4 positions minimum) (-DH & -MT not available) -TR (5.64) .222 See SFM/TFM for positive alignment feature. OPTION -04 PROCESSING Notes: Some sizes, styles and options are non-standard, non-returnable. - TAIL OPTION --EL --DH (Styles --01, --02, --04 only) --EJ --K LEAD STYLE A -01 (3.05) .120 -02 (1.91) .075 -03 (1.65) .065 -04 (3.81) .150 -05 (4.32) .170 = Tape & Reel (Flex Shroud options not available except -ES & -EJ) -FR = Full Reel Tape & Reel (must order maximum quantity per reel; contact Samtec for quantity breaks) --P samtec.com?FTSH Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec's specifications which are subject to change without notice. --A F-221