DATA SHEET SMV1211-SMV1215: Hyperabrupt Junction Tuning Varactors Features High capacitance ratio, C1 V/C4 V = 5 typ. Multiple packages SOT-23, SOD-323, SC-70 and SC-79 Designed for high volume commercial applications SPICE models are available Description The SMV1211-SMV1215 series of silicon hyperabrupt junction varactor diodes is designed for use in VCOs with low tuning voltage operation. This family of varactors is characterized for capacitance and resistance over temperature. SPICE models are provided. NEW Skyworks offers lead (Pb)-free "environmentally friendly" packaging that is RoHS compliant (European Parliament for the Restriction of Hazardous Substances). Absolute Maximum Ratings Characteristic Value Reverse voltage (VR) 12 V Forward current (IF) 20 mA Power dissipation (PD) 250 mW Storage temperature (TST) -55 C to +150 C Operating temperature (TOP) -55 C to +125 C ESD human body model Class 0 Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200057 Rev. B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * December 7, 2004 1 DATA SHEET * SMV1211-SMV1215 Single Single Single Common Cathode Common Cathode SC-79 SOD-323 SOT-23 SOT-23 SC-70 SMV1212-001 SMV1212-004 SMV1212-074 Marking: AB1 Marking: AB3 Marking: AB3 SMV1213-004 SMV1213-074 Marking: BD3 SMV1211-001 Marking: AA1 SMV1212-079 Marking: Cathode SMV1212-001LF Marking: EB1 SMV1213-079 SMV1213-001 Marking: Cathode Marking: 86 Marking: BD3 SMV1213-079LF SMV1213-001LF SMV1213-004LF Marking: D86 Marking: GD3 Marking: Cathode SMV1214-001 Marking: VL1 LS = 0.7 nH SMV1215-011 SMV1215-001 Marking: VM Marking: VM1 LS = 1.5 nH LS = 1.5 nH SMV1215-004 LS = 1.4 nH LS = 1.4 nH LF denotes lead (Pb)-free packaging option as an alternative to our standard tin/lead (Sn/Pb) packaging. Electrical Specifications at 25 C Part Number CT @ 1 V (pF) CT @ 2.5 V (pF) CT @ 4 V (pF) CT @ 1 V CT @ 2.5 V (Ratio) CT @ 1 V CT @ 4 V (Ratio) RS @ 4 V 500 MHz ) ( Q @4V 50 MHz Min. Typ. Min. Max. Typ. Max. Typ. Typ. Typ. Min. SMV1211 95.0 100.0 40.0 65.0 20 25.0 2 5 0.4 80 SMV1212 42.0 50.0 18.0 27.0 9 12.0 2 5 0.8 150 SMV1213 17.0 22.0 8.5 10.5 4 5.5 2 5 1.4 200 SMV1214 14.5 16.0 6.5 7.8 3 4.8 2 5 1.7 300 SMV1215 8.7 9.5 4.3 5.5 2 2.9 2 5 2.8 350 Reverse Voltage VR (IR = 10 A): 12 V minimum. Reverse Current IR (VR = 8 V): 20 nA maximum. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 December 7, 2004 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200057 Rev. B DATA SHEET * SMV1211-SMV1215 Typical Performance Data 1000.0 4 SMV1211 3 SMV1215 2 SMV1214 1 SMV1213 RS () SMV1213 SMV1214 SMV1215 10.0 SMV1212 1.0 SMV1211 0 0 4.0 2.0 6.0 8.0 0 1 2 3 4 5 Reverse Voltage (V) Reverse Voltage (V) Capacitance vs. Reverse Voltage Series Resistance vs. Reverse Voltage @ 500 MHz 3 15 2 10 VR = 1 V Percentage Change (%) Percentage Change (%) Capacitance (pF) SMV1212 100.0 1 0 -1 -2 VR = 4 V -3 5 0 -5 -10 -15 -40 -20 0 20 40 60 80 -40 -20 0 20 40 60 80 Temperature (C) Temperature (C) Relative Capacitance Change vs. Temperature Relative Series Resistance Change vs. Temperature @ 500 MHz Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200057 Rev. B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * December 7, 2004 3 DATA SHEET * SMV1211-SMV1215 Typical Capacitance Values SPICE Model SMV1211 SMV1212 SMV1213 SMV1214 SMV1215 VR (V) CT (pF) CT (pF) CT (pF) CT (pF) CT (pF) 0.0 162.6 72.4 30.0 26.0 14.8 0.5 122.3 55.3 22.8 19.6 11.3 1.0 98.6 44.9 18.1 15.6 9.1 1.5 80.4 36.9 15.3 12.4 7.5 2.0 64.2 29.9 12.3 9.6 6.0 2.5 48.2 22.9 9.2 6.8 4.5 3.0 34.1 16.3 6.4 4.7 3.1 3.5 24.7 11.8 4.5 3.5 2.3 4.0 19.4 9.3 3.5 2.9 1.9 4.5 16.4 7.9 3.0 2.5 1.7 5.0 14.6 7.0 2.6 2.3 1.5 5.5 13.3 6.4 2.4 2.1 1.4 6.0 12.4 6.0 2.2 2.0 1.3 6.5 11.7 5.7 2.1 1.9 1.3 7.0 11.2 5.5 2.0 1.8 1.2 7.5 10.8 5.3 1.9 1.8 1.2 8.0 10.5 5.1 1.9 1.7 1.2 PORT P_anode port = 1 IND LS L = LS RES RS R = RS CAP CP C = CP DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear PORT P_Cathode port = 2 DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 FC = 0.5 BV = 0 IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 Part Number CJO (pF) VJ (V) M CP (pF) RS ) ( SMV1211 163.00 200 130 9.5 0.4 SMV1212 72.47 110 67 4.5 0.8 SMV1213 28.90 190 105 2.2 1.4 SMV1214 22.74 190 106 1.5 1.7 SMV1215 14.36 190 115 1.1 2.8 1. Values extracted from measured performance. 2. For package inductance (LS) refer to package type. 3. For more details refer to the "Varactor SPICE Models for RF VCO Applications" Application Note. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 December 7, 2004 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200057 Rev. B DATA SHEET * SMV1211-SMV1215 Recommended Solder Reflow Profiles SnPb Eutectic Assembly Lead (Pb)-Free Assembly 100% Sn Average ramp-up rate (TL to TP) Profile Feature 3 C/second max. 3 C/second max. Preheat Temperature min. (TSMIN) Temperature max. (TSMAX) Time (min. to max.) (ts) 100 C 150 C 60-120 seconds 150 C 200 C 60-80 seconds TSMAX to TL Ramp-up rate -- 3 C/second max. Time maintained above: Temperature (TL) Time (tL) 183 C 60-150 seconds 217 C 60-150 seconds Peak temperature (TP) 240 +0/-5 C 250 +0/-5 C Time within 5 C of actual peak temperature (tp) 10-30 seconds 20-40 seconds Ramp-down rate 6 C/second max. 6 C/second max. Time 25 C to peak temperature 6 minutes max. 8 minutes max. All temperatures refer to the topside of the package, measured on the package body surface. Reference JEDEC J-STD-020B. tp TP Critical Zone TL to TL TL IL Temperature TSMAX TSMIN ts Preheat 25 C t 25 C to Peak Time Reference JEDEC J-STD-020 Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200057 Rev. B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * December 7, 2004 5 DATA SHEET * SMV1211-SMV1215 SOT-23 SC-70 0.110 (2.80 mm) Min. 0.120 (3.04 mm) Max. 0.071 (1.80 mm) Min. 0.087 (2.20 mm) Max. 0.012 (0.30 mm) Min. 0.020 (0.50 mm) Max. 3 0.083 (2.10 mm) Min. 0.104 (2.64 mm) Max. 0.047 (1.20 mm) Min. 0.055 (1.40 mm) Max. 0.010 (0.25 mm) Min. 0.016 (0.40 mm) Max. 0.071 (1.80 mm) Min. 0.094 (2.40 mm) Max. 2 1 3 0.045 (1.15 mm) Min. 0.053 (1.35 mm) Max. 1 0.037 (0.95 mm) Ref. 0.020 (0.51 mm) Ref. 2 0.014 (0.35 mm) Ref. 0.026 (0.65 mm) Ref. 0.076 (1.92 mm) Ref. 0.051 (1.30 mm) Ref. 0.035 (0.89 mm) Min. 0.044 (1.12 mm) Max. 0.003 (0.080 mm) Min. 0.008 (0.20 mm) Max. 0.004 (0.10 mm) Min. 0.007 (0.18 mm) Max. 0.031 (0.80 mm) Min. 0.039 (1.00 mm) Max. 8 Max. 0.0005 (0.01 mm) Min. 0.004 (0.10 mm) Max. 0.022 (0.55 mm) Ref. SOD-323 0.004 (0.10 mm) Min. 0.012 (0.30 mm) Max. 0.000 (0.00 mm) Min. 0.004 (0.10 mm) Max. SC-79 0.090 (2.30 mm) Min. 0.108 (2.74 mm) Max. 0.045 (1.15 mm) Min. 0.053 (1.35 mm) Max. 1 2 Cathode Indicator Cathode Indicator 0.010 (0.25 mm) Min. 0.016 (0.40 mm) Max. 0.010 (0.25 mm) Min. 0.014 (0.35 mm) Max. 0.028 (0.70 mm) Min. 0.035 (0.90 mm) Max. 0.043 (1.10 mm) Min. 0.051 (1.30 mm) Max. 0.050 (1.25 mm) Max. 0.004 (0.10 mm) Max. 0.010 (0.25 mm) Min. 2 0.060 (1.50 mm) Min. 0.067 (1.70 mm) Max. 0.063 (1.60 mm) Min. 0.071 (1.80 mm) Max. 0.008 (0.20 mm) Nom. 0.006 (0.15 mm) Typ. 1 0.006 (0.15 mm) Min. 0.020 (0.50 mm) Min. 0.028 (0.70 mm) Max. 10 Max. 0.003 (0.07 mm) Min. 0.008 (0.20 mm) Max. 10 Max. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 6 December 7, 2004 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200057 Rev. B DATA SHEET * SMV1211-SMV1215 Copyright (c) 2002, 2003, 2004, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products. These materials are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products, specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. The following are trademarks of Skyworks Solutions, Inc.: SkyworksTM, the Skyworks logo, and Breakthrough SimplicityTM. Product names or services listed in this publication are for identification purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at www.skyworksinc.com, is incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200057 Rev. B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * December 7, 2004 7