SHD120134 SHD120134P SHD120134N SHD120134D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4653, REV. C HERMETIC SCHOTTKY RECTIFIER Low Forward Voltage Drop Features: * * * * * * Soft Reverse Recovery at Low and High Temperature Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Maximum Ratings Characteristics Peak Inverse Voltage per leg Max. Average Forward Current Symbol VRWM IF(AV) Max. Peak One Cycle NonRepetitive Surge Current per leg Non-Repetitive Avalanche Energy per leg Repetitive Avalanche Current per leg IFSM Maximum Thermal Resistance RJC Max. Junction Temperature Max. Storage Temperature EAS IAR TJ Tstg Condition 50% duty cycle, rectangular wave form - Common Cathode / Anode - Single / Doubler 8.3 ms, half Sine wave Max. 100 Units V 15 7.5 140 A A A TJ = 25 C, IAS = 3.0 A, L = 4.4 mH IAS decay linearly to 0 in 1 s limited by TJ max VA=1.5VR 20 mJ 3.0 A 1.3 C/W - Common Cathode / Anode - Single / Doubler - 2.5 -65 to +175 -65 to +175 C C Max. 0.90 0.74 0.05 Units V V mA 0.5 mA 250 pF Electrical Characteristics Characteristics Max. Forward Voltage Drop (per leg) Max. Reverse Current Symbol VF1 VF2 IR1 (per leg) IR2 Max. Junction Capacitance (per leg) CT Condition @ 7.5A, Pulse, TJ = 25 C @ 7.5A, Pulse, TJ = 125 C @VR = 100V, Pulse, TJ = 25 C @VR = 100V, Pulse, TJ = 125 C @VR = 5V, TC = 25 C fSIG = 1MHz, VSIG = 50mV (p-p) (c)2004 Sensitron Semiconductor * 221 West Industry Court * Deer Park, NY 11729-4681 PHONE (631) 586-7600 * FAX (631) 242-9798 * www.sensitron.com * sales@sensitron.com SHD120134 SHD120134P SHD120134N SHD120134D TECHNICAL DATA DATA SHEET 4653, REV. C LCC-5 Mechanical Dimensions: in Inches / mm SINGLE 1 2 COMMON CATHODE 3 1 COMMON ANODE 1 2 3 3 PINOUT TABLE DEVICE TYPE PIN 1 PIN 2 SINGLE RECTIFIER CATHODE ANODE DUAL RECTIFIER, COMMON CATHODE (P) ANODE 1 COMMON CATHODE DUAL RECTIFIER, COMMON ANODE (N) CATHODE 1 COMMON ANODE DUAL RECTIFIER, DOUBLER (D) ANODE ANODE/CATHODE Note: The Vf curves shown are for the SD90SC100 unpackaged die only. Typical Forward Characteristics 2 DOUBLER 2 Typical Reverse Characteristics 10 Instantaneous Reverse Current - I R (mA) 200 C 100 175 C 150 C 10-1 125 C 10-2 100 C 75 C 10-3 50 C 10-4 125 C 10-1 25 C 10-5 0 20 40 60 80 Reverse Voltage - VR (V) 100 120 Typical Junction Capacitance Junction Capacitance - CT (pF) Instantaneous Forward Current - I F (A) 175 C 200C 100 25 C 10-2 -3 10 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - V F (V) 0.8 250 200 150 100 50 0 0 20 40 60 80 Reverse Voltage - VR (V) 100 1 PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE 1 101 3 120 (c)2004 Sensitron Semiconductor * 221 West Industry Court * Deer Park, NY 11729-4681 PHONE (631) 586-7600 * FAX (631) 242-9798 * www.sensitron.com * sales@sensitron.com SHD120134 SHD120134P SHD120134N SHD120134D TECHNICAL DATA DATA SHEET 4653, REV. C DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. (c)2004 Sensitron Semiconductor * 221 West Industry Court * Deer Park, NY 11729-4681 PHONE (631) 586-7600 * FAX (631) 242-9798 * www.sensitron.com * sales@sensitron.com