144
145
Accessories
Finger Guards 146
Fan Finger Guards 151
Connector cable 153
Accessories 154
Everything that you need for your
fan. ebm-papst provides an
extensive range of accessories for
optimum fan operation: From
temperature sensing for speed-
controlled fans to finger guards of
all types, switched-mode power
supply, connecting cable, filter,
screens, spacers and assembly
parts. In addition to the accesso-
ries and assembly parts listed in
this catalogue, ebm-papst also
supplies numerous special parts
for fan operation. The sales
experts at ebm-papst will be
happy to assist you in your enqui-
ries concerning fan assembly and
application.
From selection to accessories:
Insist on the efficient and reliable
service provided by
ebm-papst.
TechnologyDC Axial FansDC Radial Fans
SpecialsACmaxx
AC Axial FansAC Radial FansAccessories
146
– Finger guards as per EN 294, of rust-proof steel wire for equipment fans.
– Further finger guards that do not conform to EN 294 can be supplied on request.
Finger Guards
LZ29-1 Fan size 40 x 40
50
59
30
2
4,2
+1
+0,3
+0,5
4,2±0,5
50
LZ28-1 Fan size 60 x 60
82,5
82,5
4,3 0,2
+
_1
92
40 1
+
2
4,7
0,3
+
1
+
LZ23-1 Fan size 92 x 92
2
4,7
0,3
+
1
+
71,5
71,5
78,2
4,3 0,2
+
0,5
±
40 1
+
LZ32-4 Fan size 80 x 80
119 _1
51,5+1
2
4,7
+0,3
+1
104,8
104,8
4,3 0,2
+
LZ30-4 Fan size 119 x 119
42
4,8
1,8
42
4,5
LZ31 Fan size 50 x 50
400 LZ29-1
500 LZ31
600 LZ28-1
3000 LZ23-1
8000 LZ32-4 / LZ22-2
9000 LZ30-4 / LZ 30
4000 LZ30-4 / LZ 30
5100 LZ25
Fan series Finger Guards
5600 LZ25
5200 LZ35
5900 LZ35
7000 LZ36
6200 LZ37
6300 LZ 37
6400 LZ38
Fan series Finger Guards
DV 6200 LZ37 suction face
DV 6200 LZ39 blade face
DV 6400 LZ38 suction face
DV 6400 LZ39 blade face
Fan series Finger Guards
4,3 5
3
+0,2 +1
±0,25
115
153,5
±1
±1
LZ30 Fan size 119 x 119
4,3 2,5
+0,2 +0,3
48
78
105,5
±1
±1
+0,5
LZ22-2 Fan size 80 x 80
LZ25 Fan size 135 x 135 LZ35 Fan size 127 x 127 LZ36 Fan size 150 x 172
LZ37 Fan size 172 Ø x 51 LZ38 Fan size 172 Ø x 51 LZ39 Fan size 172 Ø x 51
147
TechnologyDC Axial Fans
ACmaxx
AC Axial FansAC Radial FansAccessories DC Radial Fans
Specials
51,5 4,7
2
4,3
119
104,8
+1 +1
+0,3
+0,2
-1
104,8
LZ30-9 Fan size 119 X 119
51,5
162
Ø158,9
4,3 6
2,5
±0,2
+0,5
±0,3
±0,5
LZ37-2 Fan size 172 Ø X 51
148
– Finger guards as per EN 294, of rust-proof steel wire for equipment fans.
ACmaxx Axial Fans Finger Guards
AC 8300 LZ32-4 suction face
AC 8300 H * blade face
AC 3200 J LZ23-1 suction face
AC 3200 J * blade face
AC 4400 FN LZ30-4 suction face
AC 4400 FN LZ30-9 blade face
AC 4300 LZ30-4 suction face
AC 4300 LZ30-9 blade face
Fan series Finger Guards
AC 6200 N LZ37 suction face
AC 6200 N LZ37-2 blade face
AC 6100 N LZ37 suction face
AC 6100 N * blade face
Fan series Finger Guards
119 _1
51,5+1
2
4,7
+0,3
+1
104,8
104,8
4,3 0,2
+
LZ30-4 Fan size 119 x 119
2
4,7
0,3
+
1
+
71,5
71,5
78,2
4,3 0,2
+
0,5
±
40 1
+
LZ32-4 Fan size 80 x 80
LZ37 Fan size 172 Ø x 51
82,5
82,5
4,3 0,2
+
_1
92
40 1
+
2
4,7
0,3
+
1
+
LZ23-1 Fan size 92 x 92
*Blade face finger guards on request.
149
TechnologyDC- Axiallüfter
SpecialsACmaxx
AC Axial FansAC Radial FansAccessories
– Size 180: galvanised steel wire, chromatised in blue.
– Size 200 / 208 / 250: steel wire, plastic coated, silver metallic gloss.
Finger Guards
26388-2-4039 Fan size 180 78128-2-4039 Fan size 200 35139-2-4039 Fan size 208
35138-2-4039 Fan size 208 09418-2-4039 Fan size 250
W1G 180 26388-2-4039
W1G 200 78128-2-4039
W1G 208 35139-2-4039
35138-2-4039
W1G 250 09418-2-4039
W2E 200 78128-2-4039
Fan series Finger Guards
W4S 200 78128-2-4039
W2E 208 35139-2-4039
35138-2-4039
W2D 208 35139-2-4039
35138-2-4039
W2E 250 09418-2-4039
Fan series Finger Guards
DC Radial Fans
150150150
– Finger guards of black, fibreglass reinforced plastik (conform to EN 294).
– Plastic protective grilles must not be used for the following models:
8200 JH3 / JH4
3200 JH3 / JH4
4100 NH5 - NH8
Finger Guards
LZ30-5 A2 119-0.5 105±0.2 6.5 50
LZ30-6 A4 119-0.5 105±0.2 6.5 50
LZ33-1 A2 127-0.5 113.5±0.2 6.5 50
LZ33-2 A4 127-0.5 113.5±0.2 6.5 50
Finger Guards Mounting B C D E
LZ32-2 A1 80-0.5 71.5±0.2 7.0 34
LZ32-3 A3 80-0.5 71.5±0.2 7.0 34
LZ23-2 A1 92.5-0.5 82.5±0.2 6.5 46
LZ23-3 A3 92.5-0.5 82.5±0.2 6.5 46
Finger Guards Mounting B C D E
LZ32P Fan size 80 x 80
LZ32-2 / LZ32-3 Fan size 80 x 80
LZ23-2 / LZ23-3 Fan size 92 x 92
LZ30-5 / LZ30-6 Fan size 119 x 119
LZ33-1 / LZ33-2 Fan size 127 x 127
LZ30P Fan size 119 x 119
AC
B
D
D
FF92 / FF 119 / FF 172
151
– Fan filter guards for installation on axial fan series for sizes 60 mm, 80 mm, 92 mm,
119 mm, 172 mm. All filter units fit directly onto the existing installation holes on the fans.
– Fan filter guards consist of 3 parts: the outer grille, the inner fastening plate and the replace-
able filter mat.
– Grille is molded of polycarbonate (PC) with a matt surface.
– A quick-release on the grille allows for quick and easy filter mat replacement.
– Wire-mesh fastening plate, black powder coating.
– Filter mat replacement can be performed on running fans, welded wire-mesh protection.
– Filter mat made of white, synthetically bonded fibers.
TechnologyDC Axial Fans
ACmaxx
AC Axial FansAC Radial FansAccessories
151
Fan Filter Guards
Filter capacity
A fan filter guard filters out up to 75% of
dust particles up to a size of 5-10 microns
and withstands temperatures of up to
100°C. Flame retardant in accordance with
DIN 53438, grade F1. For installed, clean
filters, an air flow reduction of 20 – 30%
can be assumed.
AC
B
D
D
FF60 / FF80
FF60 60 x 60 mm 65 65 13.5 50.0 RF 60
FF80 80 x 80 mm 85 85 14.0 71.5 RF 80
FF92 92 x 92 mm 125 105 17.5 82.5 RF 92
FF119 119 x 119 mm 162 136 18.5 104.5 RF 119
FF172 ø 172 mm 226 190 19.5 162.0 RF 172
Protection Filter Fan size A B C D Replacement filter*
Fan size: 60 x 60 mm
80 x 80 mm
* Replacement filters only in packs of 5.
Fan size: 92 x 92 mm
119 x 119 mm
ø 172 mm
DC Radial FansSpecials
152152152
– Protective filter grille comprising mounting strap, filter and screen.
– Screen LZ40 N made of black, fiberglass-reinforced plastic with inserted wire netting
(LZ60).
– LZ 60 filter made of Nirosta wire mesh.
– LZ40-1 mounting strap for assembly.
Filter class
LZ40N Screen LZ40-1 Bracket LZ60 Filter
4400 F
4400 FN
4300
4300 N
4400
4200
4100 N
Fan series DC
AC 4300
9900
4000 N
4000 Z
Fan series AC
– Connector cable with injection moulded plug in various lengths.
– Strand ends with core-crimping sleeve, core-end sleeve or tin-plated.
– Straight or angled plug.
– For all types of fan with flat plug 2.8 / 3.0 x 0.5.
153
TechnologyDC Axial FansAC Axial FansAC Radial FansAccessories
153153153
Connector cable
LZ120 610 G C black/black AC
LZ120-4 2 000 G A black/black AC
LZ120-5 380 W B red/black DC
LZ120-6 610 W B red/black DC
LZ120-11 2 000 G A red/black DC
LZ120-16 800 G B black/black AC
LZ120-18 4 000 G A black/black AC
LZ126 1 000 G C black/black AC
LZ127 1 600 G B black/black AC
LZ130-1 610 G C black/black AC
LZ140 610 G B black/black AC
Plug model L1 (mm) Plug Leads end Leads colour Application
Connector cable Straight plug (G)
Connector cable Angled plug (W)
12
7,5
15
16,5
11
22,5
31 L1
10
8,5
16
±0,1
–0,5
4
7,5
20 L
+0,5
2
8,5
±0,2
±0,1
4
3,5
–0,25
6
8
5,5
8
–0,25
6
ȯ1,5
Core crimp sleeve Leads end A
10+5
–2
Tin-plated Leads end B
6
ȯ1,5
Core-end sleeve Leads end C
Specials DC Radial Fans
ACmaxx
154
Accessories
In addition to the accessories and assembly parts listed in this catalogue, ebm-papst also sup-
plies numerous special parts for fans. The sales experts at ebm-papst will be happy to assist
you in your enquiries concerning fan assembly and application.
LZ212 LZ260/LZ261 LZ210
Required performance data:
R
B-value
P = 0,25 W
max
= 100 K 5% @25°C
= 4190 2%
25
LZ370
Ø 6,6
(2x) Ø 4
Ø11
12
(2x) 0,5x45°
50°
0,5
6,9 ±0,1 11±0,3
LZ550
Screw clip of stainless steel.
For mounting fans with threaded
pin 3.5 DIN EN ISO 1478 (7970).
Screw clip of hardened steel. For mounting
fans with threaded pin 6-32 UNC and/or 3.5
DIN 7970.
Temperature sensor for speed-controlled
fan operation. Temperature range 30...50 °C.
Rubber anti vibration mounts
for fans with a hole ø of 4.3 ±0.2 mm and
flange thickness of 3 - 5.5 mm.
For a carrier plate with a hole ø of 6.5 ±0.15 mm and
plate thickness of 1 - 2 mm.
Spacer of fibreglass reinforced plastic. For screw
mounting over both fan mounting flanges.
8300 LZ212 / LZ260
8400 N LZ261
3300 LZ212 / LZ260
3400 N LZ261
9000 LZ210
4000 LZ210
4300 LZ212 / LZ260
8300 LZ212
Fan series Accessories
5100 LZ210
5600 LZ210
5200 LZ210
5900 LZ210
7000 LZ210
VARIOFAN LZ370
Fan series Accessories
155
TechnologyDC Axial FansDC Radial Fans
SpecialsACmaxx
AC Axial FansAC Radial FansAccessories
