PM4S-A2C30M-AC120V - PANASONIC

PM4S

Product types

Parts name

• The PM4S Multi-Range timer allows time units and output contacts to be selected via front switches.

MULTI-RANGE

ANALOG TIMER PM4S

Timers

Type /////// Contact arrangement Time range Operating voltage Part No.

PM4S

Multi-range Timer

A type

Power

ON-delay

T.D. :

Timed-out 2C

INST.:

Timed-out 1C

Instantaneous 1C

(Selected by front switch)

1s/10s/1min/10min

(4 time ranges selectable)

100 to 120V AC PM4S-A2C10M-AC120V

200 to 240V AC PM4S-A2C10M-AC240V

12V DC PM4S-A2C10M-DC12V

24V DC PM4S-A2C10M-DC24V

PM4S

Multi-range Timer

B type

3s/30s/3min/30min

(4 time ranges selectable)

100 to 120V AC PM4S-A2C30M-AC120V

200 to 240V AC PM4S-A2C30M-AC240V

12V DC PM4S-A2C30M-DC12V

24V DC PM4S-A2C30M-DC24V

PM4S

Multi-range Ttimer

C type

6s/60s/6min/60min

(4 time ranges selectable)

100 to 120V AC PM4S-A2C60M-AC120V

200 to 240V AC PM4S-A2C60M-AC240V

12V DC PM4S-A2C60M-DC12V

24V DC PM4S-A2C60M-DC24V

PM4S

Multi-range Timer

D type

1min/10min/1h/10h

(4 time ranges selectable)

100 to 120V AC PM4S-A2C10H-AC120V

200 to 240V AC PM4S-A2C10H-AC240V

12V DC PM4S-A2C10H-DC12V

24V DC PM4S-A2C10H-DC24V

PM4S

Multi-range Timer

E type

3min/30min/3h/30h

(4 time ranges selectable)

100 to 120V AC PM4S-A2C30H-AC120V

200 to 240V AC PM4S-A2C30H-AC240V

12V DC PM4S-A2C30H-DC12V

24V DC PM4S-A2C30H-DC24V

Features

1. Economic pricing that promptly

reﬂects market demands

Remarkable economic pricing is

implemented in pursuit of cost

performance.

2. Output contacts switchable

between timed out 2C and timed out

1C/Instantaneous 1C

The timed out 1C/Instantaneous 1C

output contact enables the efﬁcient

addition of self-maintenance circuits.

3. 4 different time ranges selectable

on a single unit

Five types of timers cover the full range of

time settings from 1 second to 30 hours.

4. Equipped with zero-setting

instantaneous output

Set the dial all the way to “0” for

instantaneous operation, so circuit

testing can be easily accomplished.

5. Compliant with UL, c-UL and CE.

RoHS Directive compatibility information

http://www.nais-e.com/

Time unit selector

Time range selector

Output contact selector

PM4S

Speciﬁcations

Applicable standard

Safety standard EN61812-1 Pollution Degree 2/Overvoltage Category III

EMC

(EMI)EN61000-6-4

Radiation interference electric ﬁeld strength

Noise terminal voltage

(EMS)EN61000-6-2

Static discharge immunity

RF electromagnetic ﬁeld immunity

EFT/B immunity

Surge immunity

Conductivity noise immunity

Power frequency magnetic ﬁeld immunity

Voltage dip/Instantaneous stop/Voltage ﬂuctuation immunity

EN55011 Group1 ClassA

EN61000-4-2 4 kV contact

8 kV air

EN61000-4-3 10 V/m AM modulation (80 MHz to 1 GHz)

10 V/m pulse modulation (895 MHz to 905 MHz)

EN61000-4-4 2 kV (power supply line)

EN61000-4-5 1 kV (power line)

EN61000-4-6 10 V/m AM modulation (0.15 MHz to 80 MHz)

EN61000-4-8 30 A/m (50 Hz)

EN61000-4-11 10 ms, 30% (rated voltage)

100 ms, 60% (rated voltage)

1,000 ms, 60% (rated voltage)

5,000 ms, 95% (rated voltage)

Notes) 1. Unless otherwise speciﬁed, the measurement conditions at the maximum scale time standard are speciﬁed to be the rated operating voltage (within 5% ripple factor

for DC), 20°C 68°F ambient temperature, and 1s power off time.

2. For the 1s range, the tolerance for each speciﬁcation becomes ±10ms.

Type

Item PM4S Multi-range Timer

Rating

Rated operating voltage 100 to 120V AC 200 to 240V AC 12V DC 24V DC

Rated frequency 50/60 Hz —

Rated power consumption

Approx. 3.0VA/3.6VA

(at 100V AC)

Approx. 4.5VA/5.25VA

(at 120V AC)

Approx. 5.6VA/6.8VA

(at 200V AC)

Approx. 7.5VA/9.8VA

(at 240V AC)

Approx. 1.3W Approx. 1.7W

Output rating 5A 250V AC (resistive load)

Operating mode Power ON-delay

Time range

A type 1s/10s/1min/10min (4 time ranges selectable)

B type 3s/30s/3min/30min (4 time ranges selectable)

C type 6s/60s/6min/60min (4 time ranges selectable)

D type 1min/10min/1h/10h (4 time ranges selectable)

E type 3min/30min/3h/30h (4 time ranges selectable)

Time accuracy Note)

Operating time ﬂuctuation ±1% (power off time change at the range of 0.1s to 1h)

Setting error ±5% (Full-scale value)

Voltage error ±1% (at the operating voltage changes between 85 to 110%)

Temperature error ±2% (at 20°C ambient temp. at the range of –10 to +50°C +14 to +122°F)

Contact

Contact arrangement T.D.: Timed-out 2 Form C

INST.: Timed-out 1 Form C, instantaneous 1 Form C (Selected by front switch)

Contact resistance (Initial value) Max. 100mΩ (at 1A 6V DC)

Contact material Silver alloy

Life Mechanical (contact) Min. 107

Electrical (contact) Min. 105 (at raed control capacity)

Electrical function

Allowable operating voltage range 85 to 110% of rated operating voltage

Insulation resistance (Initial value)

Min. 100MΩBetween live and dead metal parts (At 500V DC)

Between input and output

Between contacts of different poles

Between contacts of same pole

Breakdown voltage (Initial value)

2,000Vrms for 1 min Between live and dead metal parts

2,000Vrms for 1 min Between input and output

2,000Vrms for 1 min Between contacts of different poles

1,000Vrms for 1 min Between contacts of same pole

Min. power off time 100 ms

Max. temperature rise 55°C 131°F

Mechanical function

Vibration resistance Functional 10 to 55Hz: 1 cycle/min double amplitude of 0.25mm (10min on 3 axes)

Destructive 10 to 55Hz: 1 cycle/min double amplitude of 0.375mm (1h on 3 axes)

Shock resistance Functional Min. 98m/s2 (4 times on 3 axes)

Destructive Min. 980m/s2 (5 times on 3 axes)

Operating condition

Ambient temperature –10 to +50°C +14 to +122°F

Ambient humidity 30 to 85%RH (non-condensing)

Atmospheric pressure 860 to 1,060hPa

Ripple factor (DC type) 20%

Others Weight Approximately 110 g 3.880 oz

PM4S

Dimension (Unit: mm inch) Tolerance: ±0.5 ±.020

Operation mode

5.5 63.7 14.2

.217 2.508 .559

14.5

.571

48

1.890

44.5

1.752

• Surface mount dimensions

DIN rail terminal block

AT8-DF8K

(Sold separately)

102.2

4.024

Device installation rail

AT8-DLA1

(Sold separately)

• Panel mount dimensions (with mounting frame) • Panel cut out dimensions

Standard cut out dimensions are shown below.

Use mounting frame (AT8-DA4) and rubber gasket (ATC18002).

• Adjacent mounting

84.7

3.335

1.969

Mounting frame

AT8-DA4 (Sold separately)

Rear terminal socket

AT78041 (Sold separately)

Panel (Thickness 1 to 3.5 mm .039 to .138 inch)

+0.6

45+.024

1.772

Min. 80

3.150

Min. 80

3.150

+0.6

45+.024

1.772

A = (48×n–2.5)

+0.6

45+.024

1.772

+0.6

A = (1.890×n–.098)+.024

• Terminal layouts and wiring diagrams

Operating

voltage

COM COM

NO NO

NC NC

MODE

T.D.: Timed-out 2 Form C

INST.: Timed-out 1 Form C,

instantaneous 1 Form C

* Selected by front switch

T. D. I N S T.

Notes:

1. Operating voltage signs in parentheses ( ) indicate the polarity

of the DC type.

2. is a time delay contact.

is an instantaneous contact.

1. T.D. mode 2. INST. mode

TON

OFF

Power supply

Time out

(N.O. contact)

1–3 or 6–8

OP.LED

Note: Keep 0.1s or more for power off time.

TON

OFF

Power supply

Time out

(N.O. contact) 6–8

Time out

(N.O. contact) 1–3

OP.LED

PM4S

Precautions during usage

Acquisition of CE marking

1. Avoid locations subject to

ﬂammable or corrosive gases,

excessive dust, oil, vibrations, or

excessive shocks.

2. Since the main-unit is made of

polycarbonate resin, avoid contact

with or use in environments

containing methyl alcohol, benzene,

thinners, and other organic solvents;

and ammonia, caustic sodas, and

other alkaline substances.

3. Power supply superimposed surge

protector

Although a surge protector will withstand

standard-waveform voltage with the

values in the next table, anything above

this will destroy the internal circuit. You

should therefore use a surge absorber.

• Surge waveform

[±(1.2×50) µs uni-polar full wave voltage]

4. In order to maintain the

characteristics, do not remove the

timer case.

5. When installing the panel, use the

ATA4811 mounting frame (Sold

separately).

6. If you change the operating voltage,

be sure not to allow leak current into

the timer.

7. Avoid leaving the unit powered

continuously. Leaving the unit

powered up with output set to ON

continuously for a long period of time

(about 1 month or more) will wear out

the electronic components. If you will

be keeping it powered continuously,

combine with a relay to create the

circuit shown below:

8. The timer setting dial should only be

turned within the range indicated on

the dial face. Turning it too far may

break the stopper and cause damage

to internal components.

12 V DC

24 V DC

100 to 120 V AC

200 to 240 V AC

500 V 4,000 V

Please abide by the conditions below

when using in applications that

comply with EN61812-1.

1. Overvoltage category III,

pollution level 2

2. The load connected to the output

contact should have basic insulation.

This timer is protected with basic

insulation and can be double-

insulated to meet EN/IEC

requirements by using basic

insulation on the load.

3. Please use a power supply that is

protected by an overcurrent protection

device which complies with the EN/

IEC standard (example: 250 V 1 A fuse,

etc.).

4. You must use a terminal socket or

socket for the installation. Do not

touch the terminals or other parts of

the timer when it is powered. When

installing or un-installing, make sure

that no voltage is being applied to any

of the terminals.

5. Do not use this timer as a safety

circuit. For example when using a

timer in a heater circuit, etc., provide a

protection circuit on the machine side.

Features

1. 100-240V AC free-voltage input, 48-125V DC type available

2. Short body — 62.5mm 2.461 inch (screw terminal type)

3. Front panel of IP65 type is protected against water-splash and dust

4. Built-in Screw terminals

Screw terminal type is used for easy wiring and reducing additional cost for

accessories.

5. 0 setting instantaneous output operation

6. Multiple time ranges — 1 s to 500 h (Max.)

7. 8 different operation modes: (PM4H-A)

8. Compliant with UL/CSA, CE and LLOYD

1.890

62.5

2.461

mm inch

Pin type

Screw

terminal type

Product types

Type

PM4H-S

PM4H-M

PM4H-A

Operation mode Contact

arrangement Time range Rated

operating voltage

Protective

construction Terminal type Part number

PM4HA-H-AC240VW

PM4HA-H-AC240VSW

PM4HA-H-DC125VW

PM4HA-H-DC125VSW

PM4HA-H-24VW

PM4HA-H-24VSW

PM4HA-H-DC12VW

PM4HA-H-DC12VSW

PM4HA-H-AC240V

PM4HA-H-AC240VS

PM4HA-H-DC125V

PM4HA-H-DC125VS

PM4HA-H-24V

PM4HA-H-24VS

PM4HA-H-DC12V

PM4HA-H-DC12VS

PM4HS-H-AC240VW

PM4HS-H-AC240VSW

PM4HS-H-DC125VW

PM4HS-H-DC125VSW

PM4HS-H-24VW

PM4HS-H-24VSW

PM4HS-H-DC12VW

PM4HS-H-DC12VSW

PM4HS-H-AC240V

PM4HS-H-AC240VS

PM4HS-H-DC125V

PM4HS-H-DC125VS

PM4HS-H-24V

PM4HS-H-24VS

PM4HS-H-DC12V

PM4HS-H-DC12VS

PM4HM-H-AC240VW

PM4HM-H-AC240VSW

PM4HM-H-DC125VW

PM4HM-H-DC125VSW

PM4HM-H-24VW

PM4HM-H-24VSW

PM4HM-H-DC12VW

PM4HM-H-DC12VSW

PM4HM-H-AC240V

PM4HM-H-AC240VS

PM4HM-H-DC125V

PM4HM-H-DC125VS

PM4HM-H-24V

PM4HM-H-24VS

PM4HM-H-DC12V

PM4HM-H-DC12VS

16 selectable

ranges

1s to 500h

Relay

Timed-out

1 Form C

Instantaneous

1 Form C

Relay

Timed-out

2 Form C

Relay

Timed-out

2 Form C

8 operation modes

• Pulse ON-delay

• Pulse Flicker

• Pulse ON-flicker

• Differential ON/OFF-delay (1) (2)

• Signal OFF-delay

• Pulse One-shot

• Pulse One-cycle

Power ON-delay

5 operation modes

(With instantaneous contact)

• Power ON-delay

• Power Flicker

• Power ON-flicker

• Power One-shot

• Power One-cycle

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

100 to 240V AC

48 to 125V DC

24V AC/DC

12V DC

100 to 240V AC

48 to 125V DC

24V AC/DC

12V DC

100 to 240V AC

48 to 125V DC

24V AC/DC

12V DC

100 to 240V AC

48 to 125V DC

24V AC/DC

12V DC

100 to 240V AC

48 to 125V DC

24V AC/DC

12V DC

100 to 240V AC

48 to 125V DC

24V AC/DC

12V DC

IP65

IP50

IP65

IP50

IP65

IP50

If you use this timer under harsh environment, please order above sealed type (IP65 type). IP65 type — Protection dust and water jet splay on the front face.

UL File No.: E122222

CSA File No.: LR39291

PM4H-A/S/M

DIN48 SIZE

MULTI-RANGE

ANALOG TIMER

PM4H-A

PM4H-S

PM4H-M

RoHS Directive compatibility information

http://www.nais-e.com/

Specifications

PM4H-A

Type

Item PM4H-S

100 to 240V AC, 48 to 125V DC, 12V DC, 24V AC/DCRated operating voltage

50/60Hz common (AC operating type)

5A 250V AC (resistive load)

Power ON-delay

Pulse ON-delay

Pulse Flicker

Pulse ON-Flicker

Differential ON/OFF-delay (1) (2)

Signal OFF-delay

Pulse One-shot

Pulse One-cycle

Power ON-delay

Power Flicker

Power ON-flicker

Power One-shot

Power One-cycle

(with instantaneous contact)

Rated frequency

Rated control capacity

1s to 500h (Max.) 16 time ranges switchable

±0.3% (power off time change at the range of 0.1s to 1h)

±5% (Full-scale value)

±0.5% (at the operating voltage changes between 85 to 110%)

Max. 100mΩ (at 1A 6V DC)

±2% (at 20°C ambient temp. at the range of –10 to +50°C +14 to +122°F)

Timed-out 1 Form C

Instantaneous 1 Form C

Time range

Operating time fluctuation

2×107

105 (at rated control capacity)

Mechanical (contact)

Electrical (contact)

85 to 110% of rated operating voltage (at 20°C coil temp.)Allowable operating voltage range

–10 to +50°C +14 to +122°FAmbient temperature

30 to 85%RH (at 20°C 68°F, non-condensing)Ambient humidity

860 to 1,060hPaAtmospheric pressure

20%Ripple factor (DC type)

IP65 on front panel (using rubber gasket ATC18002) <only for IP65 type>Protective construction

100g 3.527 oz (Pin type)

110g 3.880 oz (Screw terminal type)

Weight

10 to 55Hz: 1 cycle/min double amplitude of 0.25mm (10min on 3 axes)

Vibration resistance 10 to 55Hz: 1 cycle/min double amplitude of 0.375mm (1h on 3 axes)

Min. 98m/s2 (4 times on 3 axes)

Shock resistance Min. 980m/s2 (5 times on 3 axes)

Functional

Destructive

Functional

Destructive

Between live and dead metal parts

Between input and output

Between contacts of different poles

Between contacts of same pole

Insulation resistance (Initial value)

2,000Vrms for 1 min Between live and dead metal parts

2,000Vrms for 1 min Between input and output

2,000Vrms for 1 min Between contacts of different poles

1,000Vrms for 1 min Between contacts of same pole

Breakdown voltage (Initial value)

Setting error

Voltage error

Contact resistance (Initial value)

100msMin. power off time

55°C 131°F65°C 149°FMax. temperature rise

Silver alloy Au flash on Silver alloyContact material

Temperature error

Timed-out 2 Form CContact arrangement

Operating mode

Approx. 10VA (100 to 240V AC)

Approx. 2.5VA (24V AC)

Approx. 1.5W (12V DC, 24V DC, 48 to 125V DC)

Rated power consumption

Rating

Time

accuracy

Note:)

Contact

Life

Electrical

function

Mechanical

function

Operating

condition

Others

PM4H-M

Min. 100MΩ(At 500V DC)

Note: 1) Unless otherwise specified, the measurement conditions at the maximum scale time standard are specified to be the rated operating voltage (within 5% ripple

factor for DC), 20°C 68°F ambient temperature, and 1s power off time.

2) For the 1s range, the tolerance for each specification becomes ±10ms.

PM4H-A/S/M

PM4H-A/PM4H-S/PM4H-M

All types of PM4H timer have multi-time

range.

16 time ranges are selectable.

1s to 500h (Max. range) is controlled.

Time range

Scale

Time unit

0.1s to 1s

sec min hrs 10h

0.1 min to 1 min 0.1h to 1h 1.0h to 10h

5 0.5s to 5s

Control

time range

0.5 min to 5 min 0.5h to 5h 5h to 50h

10 1.0s to 10s 1.0 min to 10 min 1.0h to 10h 10h to 100h

50 5s to 50s 5 min to 50 min 5h to 50h 50h to 500h

Note: 0 setting is for instantaneous output operation.

PM4H-A/S/M

Terminal layouts and Wiring diagrams

PM4H-A

Pin type

•Timed-out 2 Form C

Screw terminal type

•Timed-out 2 Form C

PM4H-M

Pin type

•Timed-out 1 Form C

•Instantaneous 1 Form C

Screw terminal type

•Timed-out 1 Form C

•Instantaneous 1 Form C

PM4H-S

Pin type

•Timed-out 2 Form C

Screw terminal type

•Timed-out 2 Form C

2) Contact

3) Voltage should not be applied to the various inputs (reset, start, and stop) of

the PM4H-A multi-range timer. These inputs should be input without voltage.

Timed-out contact Instantaneous contact

Type

PM4H-A

PM4H-S

PM4H-M

Connect the terminal  to negative

(–), and the terminal  to positive (+). Connect the terminal x to

negative (–), and the terminal

z to positive (+).

Connect the terminal  to negative

(–), and the terminal  to positive (+).

Screw terminal

1) DC Type

Start input

Reset input

N.O.

N.C.

211110

Stop input

N.O.

(–) (+)

Operating voltage

N.C.

N.O.

N.C. N.O.

54321

109876

(–)

(+)

Operating

voltage

Stop

input

Reset

input

Start

input

(–) (+)

N.C.

N.O.

Operating voltage

N.C.

N.O.

N.C. N.O.

54321

109876

(–)

(+)

Operating

voltage

(–) (+)

N.C.

N.O.

Operating voltage

N.C.

N.O.

N.C. N.O.

54321

109876

(–)

(+)

Operating

voltage

Parts name

PM4H-S PM4H-A PM4H-M

Time range selector

16 time settings selectable

(1 s to 500 h)

1s 5s 10s 50s

1min 5min 10min 50min

1h 5h 10h 50h

10h 50h 100h 500h

Power indicator LED

Time indicator window

Time unit indicator

Output indicator LED

Hand

Operation mode selector

Selectable from 8 operation modes

ON : Pulse ON-delay

FL : Pulse Flicker

FO : Pulse ON-flicker

OF1 : Differential ON/OFF-delay (1)

SF : Signal OFF-delay

OS : Pulse One-shot

OF2 : Differential ON/OFF-delay (2)

OC : Pulse One-cycle

Set dial

Operation mode indicator

Instantaneous output area

When the hand is in this area,

instantaneous operation starts.

Operation mode selector

Selectable from

5 operation modes

ON : Power ON-delay

FL : Power flicker

FO : Power ON-flicker

OS : Power One-shot

OC : Power One-cycle

PM4H-A/S/M

Dimensions mm inch

Tolerance: ±0.5 ±.020

•PM4H-

Screw terminal type

(Flush mount)

•Panel mount dimensions (with mounting frame)

Screw terminal type

•Surface mount dimensions

Pin type

•Panel cut out dimensions

Standard cut out dimensions are shown

below.

Use mounting frame (AT8-DA4) and rubber

gasket (ATC18002).

•Adjacent mounting

Pin type

(Flush mount/Surface mount)

Note) 1. The proper thickness of mounting

panel is between 1 to 5mm.

2. Adjacent mount is less water-resis-

tant.

62.5

2.461

12.0

.472 .236

6.0

1.890

1.890 44.5

1.752

41 dia.

1.614 dia.

.039

1.890 61.5

2.421

1.890 44.5

1.752

1.969

2.598

Rubber gasket

ATC 18002 (attached)

Mounting frame

AT8-DA4 (attached)

Panel

1.890

1.969

2.598

72.5 2.854 (8-pin)

78 3.071 (11-pin)

Rubber gasket

ATC18002 Mounting frame

AT8-DA4

(Sold separately)

Rear terminal socket

AT78041 (8-pin: sold separately)

AT78051 (11-pin: sold separately)

Panel

Din rail socket

AT8-DF8K

(8-pin: sold separately)

AT8-DF11K

(11-pin: sold separately)

Mounting rail

AT8-DLA1

104.0 (11-pin)

4.094

97.3 (8-pin)

3.831

45+

1.772+.024

0.6

45+

1.772+.024

0.6

Min. 80

3.150

Min. 80 3.150

45+

1.772+.024

0.6

A = (48×n–2.5)+

A = (1.890×n–.098)+.024

0.6

14.5

66.5

2.618

1.890 44.5

1.752

41 dia.

1.614 dia.

1.890 12.0

.472 .236

6.0

PM4H-A/S/M

Operation mode

PM4H-A

Note: Keep 0.1s or more for power off time.

Keep 0.05s or more for start, stop, reset input time.

Operation type Explanation Time chart

• If using a time-limit start when the power is turned on, and a reset when

the power is turned off, pins 2to 6(screw-tightening pins xand c)

should be shorted ahead of time.

• Turn the operation mode selector switch to the position.

If pins 2to 6(screw-tightening pins xand c) are shorted (the start input

is turned on) with the power supply on, the output will go on after the set

time has elapsed.

If the power supply is turned off, or pins 2to 7(screw-tightening pins xto

v) are shorted (the reset input is turned on), a reset is carried out.

Note) During time-limited operation, the time-limited operation is stopped

while the pins 2to 5(screw-tightening pins xto b) are being shorted

(the stop input is on). When the pins are released, time-limited operation

resumes.

• Turn the operation mode selector switch to the position.

When pins 2to 6(screw-tightening pins xand c) are shorted (the start

input is turned on) with the power supply on, the output goes on, and when

pins 2to 6(screw-tightening pins xand c) are released (the start input

is turned off), the time limit interval begins. After the set time has elapsed,

the output goes off. If start input is entered at any point during the time limit

interval, the time limit interval is reset.

Note) During time-limited operation, the time-limited operation is stopped

while the pins 2to 5(screw-tightening pins xto b) are being shorted

(the stop input is on). When the pins are released, time-limited operation

resumes.

• Turn the operation mode selector switch to the position.

When pins 2to 6(screw-tightening pins xand c) are shorted (the start

input is turned on) with the power supply on, the output goes on, and after

the set time has elapsed, it goes off.

Also, when pins 2to 6are released (the start input goes off), the output

goes on, and after the set time has elapsed, it goes off.

If the status of pins 2to 6(screw-tightening pins xand c) changes dur-

ing the time-limit interval (the start input goes from on to off, or from off to

on), the time-limit interval is restarted from the point at which the change

took place.

If the power supply is turned off, or pins 2to 7(screw-tightening pins xto

v) are shorted (the reset input is turned on), a reset is carried out.

Note) During time-limited operation, the time-limited operation is stopped while

the pins 2to 5(screw-tightening pins xto b) are being shorted (the stop

input is on). When the pins are released, time-limited operation resumes.

• If using a time-limit start when the power is turned on, and a reset when

the power is turned off, pins 2to 6(screw-tightening pins xand c)

should be shorted ahead of time.

• Turn the operation mode selector switch to the position.

When pins 2to 6(screw-tightening pins xand c) are shorted (the start

input is turned on) with the power supply on, the output goes on, and after

the set time has elapsed, it goes off. This process is subsequently repeated.

If the power supply is turned off, or pins 2to 7(screw-tightening pins xto

v) are shorted (the reset input is turned on), a reset is carried out.

Note) During time-limited operation, the time-limited operation is stopped

while the pins 2to 5(screw-tightening pins xto b) are being shorted

(the stop input is on). When the pins are released, time-limited operation

resumes.

• If using a time-limit start when the power is turned on, and a reset when

the power is turned off, pins 2to 6(screw-tightening pins xand c)

should be shorted ahead of time.

• Turn the operation mode selector switch to the position.

When pins 2to 6(screw-tightening pins xand c) are shorted (the start

input is turned on) with the power supply on, the limited time interval begins,

and the output goes on after the set time has elapsed. After the output has

gone on, it goes off when the set time has elapsed, and this process is sub-

sequently repeated.

If the power supply is turned off, or pins 2to 7(screw-tightening pins xto

v) are shorted (the reset input is turned on), a reset is carried out.

Note) During time-limited operation, the time-limited operation is stopped

while the pins 2to 5(screw-tightening pins xto b) are being shorted

(the stop input is on). When the pins are released, time-limited operation

resumes.

Pulse

ON-delay

Pulse

Flicker

Pulse

ON-flicker

Differential

ON/OFF-delay (1)

OF1

Signal

OFF-delay

Power supply

OFF

Start

OFF

ON ON

OFF

Reset

OFF

Stop

OFF

Time out (N.O. contact)

OP. LED

POWER LED

–

–

–

Tt1t2

OFFOFF

Note: LED lighting or No LED lighting

Power supply

OFF

Start

OFF

Reset

Stop

OFF

Time out (N.O. contact)

OP. LED

POWER LED

–

–

–

TT t1tat2tb

OFFOFF

Note: LED lighting or No LED lighting

Power supply

OFF

Start

OFF

Reset

Stop

OFF

Time out (N.O. contact)

OP. LED

POWER LED

–

–

–

TT t2Ttatbt1

OFFOFF

Power supply

OFF

Start

OFF

Reset

Stop

OFF

Time out (N.O. contact)

OP. LED

POWER LED

–

–

–

ON ON

Tt1t2tatb

OFF OFF

OFF

Restart

OFF

Note: LED lighting or No LED lighting

Power supply

OFF

Start

OFF

Reset

Stop

Time out (N.O. contact)

OP. LED

POWER LED

–

–

–

Ttbta

OFF

Note: LED lighting or No LED lighting

LED lighting LED flickering

T: Setting time t1, t2, ta, tb<T t1+t2=T









PM4H-A/S/M

Note: Keep 0.1s or more for power off time.

Keep 0.05s or more for start, stop, reset input time.

Operation type Explanation Time chart

• If using a time-limit start when the power is turned on, and a reset when

the power is turned off, pins 2to 6(screw-tightening pins xand c)

should be shorted ahead of time.

• Turn the operation mode selector switch to the position.

When pins 2to 6(screw-tightening pins xand c) are shorted (the start

input is turned on) with the power supply on, the output goes on for the set

time limit interval.

If the power supply is turned off, or pins 2to 7(screw-tightening pins xto

v) are shorted (the reset input is turned on), a reset is carried out.

Note) During time-limited operation, the time-limited operation is stopped

while the pins 2to 5(screw-tightening pins xto b) are being shorted

(the stop input is on). When the pins are released, time-limited operation

resumes.

• If using a time-limit start when the power is turned on, and a reset when

the power is turned off, pins 2to 6(screw-tightening pins xand c)

should be shorted ahead of time.

• Turn the operation mode selector switch to the position.

When pins 2to 6(screw-tightening pins xand c) are shorted (the start

input is turned on) with the power supply on, the output goes on after the

set time limit interval has elapsed. After it has gone on, it goes off after

one pulse (approximately 0.8 seconds).

If the power supply is turned off, or pins 2to 7(screw-tightening pins x

to v) are shorted (the reset input is turned on), a reset is carried out.

Note) During time-limited operation, the time-limited operation is stopped

while the pins

2to 5

(screw-tightening pins

xto b

) are being shorted

(the stop input is on). When the pins are released, time-limited operation

resumes.

• Turn the operation mode selector switch to the position.

When pins 2to 6(screw-tightening pins xand c) are shorted (the start

input is turned on) with the power supply on, the time limit interval begins,

and after the set time interval has elapsed, the output goes on.

Also, when pins 2to 6are released (the start input goes off), the time limit

interval begins, and after it has elapsed, the output goes off.

If the status of pins 2to 6(screw-tightening pins xand c) changes dur-

ing the time-limit interval (the start input goes from on to off, or from off to

on), the time limit interval is restarted from the point at which the change

took place.

If the power supply is turned off, or pins 2to 7(screw-tightening pins xto

v) are shorted (the reset input is turned on), a reset is carried out.

Note) During time-limited operation, the time-limited operation is stopped while

the pins 2to 5(screw-tightening pins xto b) are being shorted (the stop

input is on). When the pins are released, time-limited operation resumes.

Pulse

One-shot

Differential

ON/OFF-delay (2)

OF2

Pulse

One-cycle

PM4H-S

PM4H-M

Operation type Explanation Time chart

Time limit contact relay

When the power supply is turned on, the output goes on after the set

time interval has elapsed.

When the power supply is turned off, a reset is carried out.

Power ON-delay

Note: Keep 0.1s or more for power off time. PM4H-M timers do not have each input which is start, reset and stop.

Operation type Explanation Time chart

Turn the operation mode selector switch to display the various opera-

tions.

When the power supply is turned on, the time limit interval begins,

and operation is carried out.

When the power supply is turned off, a reset is carried out.

Power ON-delay

Power Flicker

Power ON-flicker

Power One-shot

Power One-cycle

Power supply

OFF

Start

OFF OFF

OFF

Reset

Stop

Time out (N.O. contact)

OP. LED

POWER LED

–

–

–

TT t

at1t2

OFF

Note: LED lighting or No LED lighting

Power supply

OFF

Start

OFF

Reset

Stop

Time out (N.O. contact)

OP. LED

POWER LED

–

–

–

ON ON

Ttbt1t2ta

OFF

Restart

Note: LED lighting or No LED lighting

Power supply ON OFF

Start

OFF

Reset

Stop

Time out (N.O. contact)

OP. LED

POWER LED

–

–

–

Tta

OFF

tt1tbt2t

OFF

One pulse time (t): Approx. 0.8s

Note: LED lighting or No LED lighting

Power supply

OFF

Time out (N.O. contact)

OP. LED

POWER LED

Power supply

OFF

Instantaneous contact (N.O. contact)

Time out (N.O. contact)

Power ON-delay

OP. LED

POWER LED

LED lighting LED flickering

T: Setting time









1. Operation method

1) Operation mode setting

[PM4H-A type]

8 operation modes are selectable with

operation mode selector.

Turn the operation mode selector with

screw driver.

Operation mode is shown up through the

window above the mode selector. The

marks are , , , , , , , .

Turn the mode selector to the mark until

you can check by clicking sound.

Confirm the mode selector position if it is

correct.

If the position is not stable, the timer

might mis-operate.

2) Time range setting

[PM4H series common]

16 time ranges are selectable between

1s to 500h.

Turn the time range selector with the

screw driver.

Clockwise turning increases the time

range, and Counter-clockwise turning

decrease the time range.

Confirm the range selector position if it is

correct.

If the position is not stable, the timer

might mis-operate.

3) Time setting [common]

To set the time, turn the set dial to a

desired time within the range.

Instantaneous output will be on when the

dial is set to “0”.

When the instantaneous output is used,

the dial should be set under “0” range.

(Instantaneous output area)

When power supply is on, the time

range, setting time and operation mode

cannot be changed.

Turn off the power supply or a reset sig-

nal is applied to set the new operation

mode.

If the position is not stable, the timer

might mis-operate.

ON FL FO

OF1

SF OS

OF2

2. How to use “Set ring” [PM4H series common]

1) Fixed time setting

Set the desired time and put 2 set rings

together.

Insert the rings into stopper to fix the

time.

2) Time range setting

Example: Time range 20s to 30s.

Shorter time value setting

Set the dial to 20s.

Place the stop ring at the right side of

stopper.

Longer time value setting

Set the dial to 30s.

Place the stop ring at the left side of

stopper.

Set range

Applicable standard (PM4H series common)

Set dial

Set ring (2 pcs)

ATC18001 (sold separately)

Stopper boss

Stopper

Stop ring

Stopper boss

Longer time value

SEC

Shorter time value

SEC

PM4H SERIES MODES AND TIME SETTING

Note) The stoppers for the lower limit setting set ring and the upper limit setting set ring face the opposite directions.

Safety standard EN61812-1 Pollution Degree 2/Overvoltage Category III

EMC

(EMI)EN61000-6-4

Radiation interference electric field strength

Noise terminal voltage

(EMS)EN61000-6-2

Static discharge immunity

RF electromagnetic field immunity

EFT/B immunity

Surge immunity

Conductivity noise immunity

Power frequency magnetic field immunity

Voltage dip/Instantaneous stop/Voltage fluctuation immunity

EN55011 Group1 ClassA

EN61000-4-2 4 kV contact

8 kV air

EN61000-4-3 10 V/m AM modulation (80 MHz to 1 GHz)

10 V/m pulse modulation (895 MHz to 905 MHz)

EN61000-4-4 2 kV (power supply line)

1 kV (signal line)

EN61000-4-5 1 kV (power line)

EN61000-4-6 10 V/m AM modulation (0.15 MHz to 80 MHz)

EN61000-4-8 30 A/m (50 Hz)

EN61000-4-11 10 ms, 30% (rated voltage)

100 ms, 60% (rated voltage)

1,000 ms, 60% (rated voltage)

5,000 ms, 95% (rated voltage)

PM4H-SD/SDM

Features

1. Select four types of time ranges between 0.2 s and 100 s on a single unit.

2. Select between five types of time ranges between 0.04 s and 0.7 s for the -

switching times.

3. There is a -switching indicator so you can check the operation at a

glance.

4. The AC free power supply and shorter body make it easier to use.

5. Compliant with UL, CSA, CE and LLOYD.

1.890

66.5

2.618

mm inch

Specifications

Type

Item PM4H-SD/SDM

100 to 240V AC, 24V ACRated operating voltage

50/60Hz common

5A 250V AC (resistive load)

- star-delta switching (Power ON-delay)

Rated frequency

Rated control capacity

0.04, 0.1, 0.3, 0.5, 0.7s (5 time range selectable)

±0.3% (power off time change at the range of 0.5s to 1h)

±5% (Full-scale value)

±0.5% (at the operating voltage changes between 85 to 110%)

Max. 100mΩ (at 1A 6V DC)

±2% (at 20°C ambient temp. at the range of –10 to +50°C +14 to +122°F)

Star ( ) side: Timed-out 1 Form A, Delta () side: Timed-out 1 Form A

Instantaneous: 1 Form A (Instantaneous for PM4H-SDM type only)

- switching time

Operation time fluctuation

2×107

105 (at rated control capacity)

Mechanical (contact)

Electrical (contact)

85 to 110% of rated operating voltage (at 20°C coil temp.)Allowable operating voltage range

–10 to +50°C +14 to +122°FAmbient temperature

Max. 85%RH (non-condensing)Ambient humidity

860 to 1,060hPaAtmospheric pressure

IP65 on front panel (using rubber gasket ATC18002) <only for IP65 type>Protective construction

100g 3.527 oz (Pin type), 110g 3.880 oz (Screw terminal type)

Weight

Min. 294m/s2 (4 times on 3 axes)

Shock resistance Min. 980m/s2 (5 times on 3 axes)

Functional

Destructive

10 to 55Hz: 1 cycle/min double amplitude of 0.25mm (10min on 3 axes)

Vibration resistance 10 to 55Hz: 1 cycle/min double amplitude of 0.375mm (1h on 3 axes)

Functional

Destructive

Between live and dead metal parts

Between input and output

Between contacts of different poles (*3)

Between contacts of same pole

Insulation resistance (Initial value)

2,000Vrms for 1 min Between live and dead metal parts

2,000Vrms for 1 min Between input and output

2,000Vrms for 1 min Between contacts of different poles (*3)

1,000Vrms for 1 min Between contacts of same pole

Breakdown voltage (Initial value)

Setting error

Voltage error

Contact resistance (Initial value)

500msMin. power off time

65°C 131°FMax. temperature rise

Au flash on Silver alloyContact material

Temperature error

Contact arrangement

Operation mode

Approx. 6VA (100 to 240V AC), Approx. 1.4VA (24V AC)Rated power consumption

Rating

Time

accuracy

Note:)

Contact

Life

Electrical

function

Mechanical

function

Operating

condition

Others

Min. 100MΩ(At 500V DC)

2s to 100s, 4 time ranges switchable operation control time range

Notes: 1) Unless otherwise specified, the measurement conditions at the maximum scale time standard are specified to be the rated operating voltage, 20°C 68°F ambient

temperature, and 1s power off time.

2) For the 2s range, the tolerance for each specification becomes ±10ms.

3) Between contacts of different poles for PM4H-SDM type only.

UL File No.: E122222

CSA File No.: LR39291

DIN48 SIZE ANALOG

STAR ( )-DELTA () TIMERS PM4H-SD/SDM

RoHS Directive compatibility information

http://www.nais-e.com/

PM4H-SD/SDM

Product types

Terminal layouts and Wiring diagrams

Time range

Dimensions

Operation

mm inch

PM4H-SD

Star ( )-Delta

() switching

Type Contact arrangement Time range Part number

Rated operating

voltage

Protective

construction

Terminal

type

Operation

mode

PM4HSD-S-AC240VW

PM4HSD-S-AC240VSW

PM4HSD-S-AC24VW

PM4HSD-S-AC24VSW

PM4HSDM-S-AC240VW

PM4HSDM-S-AC240VSW

PM4HSDM-S-AC24VW

PM4HSDM-S-AC24VSW

PM4HSD-S-AC240V

PM4HSD-S-AC240VS

PM4HSD-S-AC24V

PM4HSD-S-AC24VS

PM4HSDM-S-AC240V

PM4HSDM-S-AC240VS

PM4HSDM-S-AC24V

PM4HSDM-S-AC24VS

4 selectable ranges over

2s to 100s

( - switching time:

0.04, 0.1, 0.3, 0.5, 0.7s)

Relay Timed-out

side: 1 Form A

 side: 1 Form A

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

IP65

IP50

100 to 240V AC

24V AC

100 to 240V AC

24V AC

100 to 240V AC

24V AC

100 to 240V AC

24V AC

Star ( )-

Delta ()

switching

PM4H-SDM

Star ( )-Delta

() switching

(Instantaneous

contact)

PM4H-SD

Star ( )-Delta

() switching

PM4H-SDM

Star ( )-Delta

() switching

(Instantaneous

contact)

Relay Timed-out

side: 1 Form A

 side: 1 Form A

Instantaneous: 1 Form A

Relay Timed-out

side: 1 Form A

 side: 1 Form A

Relay Timed-out

side: 1 Form A

 side: 1 Form A

Instantaneous: 1 Form A

Operating voltage

54321

109876

Operating

voltage

54321

109876

Operating

voltage

side time-delay contact

Instantaneous contact

(PM4H-SDM type)

side time-delay contact

Instantaneous contact

(PM4H-SDM type)

Power

supply

Instantaneous

contact

side Contact

t1t2t3

operation time

( indicator LED lights)

– switching time

operation time

( indicator LED lights)

t1:

t2:

t3:

.236

6.0

1.890 66.5

2.618 14.5

.571

12.0

.472

1.890 41 dia.

1.614 dia. 44.5

1.752

Pin type

• No instantaneous contact

Screw terminal type

• No instantaneous contact • With instantaneous contact• With instantaneous contact

Time range

unit

100

0.2 to 2

1 to 10

2 to 20

10 to 100

0.04

0.1

0.3

0.5

0.7

Operating (s) - switching time (s)

1. Operation method

1) Operation mode setting

[PM4H-A type]

8 operation modes are selectable with

operation mode selector.

Turn the operation mode selector with

screw driver.

Operation mode is shown up through the

window above the mode selector. The

marks are , , , , , , , .

Turn the mode selector to the mark until

you can check by clicking sound.

Confirm the mode selector position if it is

correct.

If the position is not stable, the timer

might mis-operate.

2) Time range setting

[PM4H series common]

16 time ranges are selectable between

1s to 500h.

Turn the time range selector with the

screw driver.

Clockwise turning increases the time

range, and Counter-clockwise turning

decrease the time range.

Confirm the range selector position if it is

correct.

If the position is not stable, the timer

might mis-operate.

3) Time setting [common]

To set the time, turn the set dial to a

desired time within the range.

Instantaneous output will be on when the

dial is set to “0”.

When the instantaneous output is used,

the dial should be set under “0” range.

(Instantaneous output area)

When power supply is on, the time

range, setting time and operation mode

cannot be changed.

Turn off the power supply or a reset sig-

nal is applied to set the new operation

mode.

If the position is not stable, the timer

might mis-operate.

ON FL FO

OF1

SF OS

OF2

2. How to use “Set ring” [PM4H series common]

1) Fixed time setting

Set the desired time and put 2 set rings

together.

Insert the rings into stopper to fix the

time.

2) Time range setting

Example: Time range 20s to 30s.

Shorter time value setting

Set the dial to 20s.

Place the stop ring at the right side of

stopper.

Longer time value setting

Set the dial to 30s.

Place the stop ring at the left side of

stopper.

Set range

Applicable standard (PM4H series common)

Set dial

Set ring (2 pcs)

ATC18001 (sold separately)

Stopper boss

Stopper

Stop ring

Stopper boss

Longer time value

SEC

Shorter time value

SEC

PM4H SERIES MODES AND TIME SETTING

Note) The stoppers for the lower limit setting set ring and the upper limit setting set ring face the opposite directions.

Safety standard EN61812-1 Pollution Degree 2/Overvoltage Category III

EMC

(EMI)EN61000-6-4

Radiation interference electric field strength

Noise terminal voltage

(EMS)EN61000-6-2

Static discharge immunity

RF electromagnetic field immunity

EFT/B immunity

Surge immunity

Conductivity noise immunity

Power frequency magnetic field immunity

Voltage dip/Instantaneous stop/Voltage fluctuation immunity

EN55011 Group1 ClassA

EN61000-4-2 4 kV contact

8 kV air

EN61000-4-3 10 V/m AM modulation (80 MHz to 1 GHz)

10 V/m pulse modulation (895 MHz to 905 MHz)

EN61000-4-4 2 kV (power supply line)

1 kV (signal line)

EN61000-4-5 1 kV (power line)

EN61000-4-6 10 V/m AM modulation (0.15 MHz to 80 MHz)

EN61000-4-8 30 A/m (50 Hz)

EN61000-4-11 10 ms, 30% (rated voltage)

100 ms, 60% (rated voltage)

1,000 ms, 60% (rated voltage)

5,000 ms, 95% (rated voltage)

PM4H-F

Features

1. Switch operation times between three types of time ranges of 1 s to 10 s and 1

min to 10 min.

2. Instantaneous reset available.

3. The shorter body makes it easier to use.

4. Compliant with UL, CSA, CE and LLOYD.

1.890

62.5

2.461

mm inch

Specifications

PM4H-F8

Type

Item PM4H-F8R

100 to 120V AC, 200 to 240V AC, 24V AC, 12V DC, 24V DCRated operating voltage

50/60Hz common (AC operating type)

3A 250V AC (resistive load)

Power OFF-delay Power OFF-delay (with reset)

Rated frequency

Rated control capacity

1s to 10s: 3 range switchable 1 min to 10 min: 3 range selectable

±0.3%

±5% (Full-scale value)

±0.5% (at the operating voltage changes between 85 to 110%)

Max. 100mΩ (at 1A 6V DC)

±2% (at 20°C ambient temp. at the range of –10 to +50°C +14 to +122°F)

Time range

Operation time fluctuation

107

105 (at rated control capacity)

Mechanical (contact)

Electrical (contact)

85 to 110% of rated operating voltage (at 20°C coil temp.), 90 to 110% (DC Type)Allowable operating voltage range

–10 to +50°C +14 to +122°FAmbient temperature

30 to 85%RH (non-condensing)Ambient humidity

860 to 1,060hPaAtmospheric pressure

20%Ripple factor (DC type)

IP65 on front panel (using rubber gasket ATC18002) <only for IP65 type>Protective construction

100g 3.527 oz (Pin type), 110g 3.880 oz (Screw terminal type)Weight

Min. 98m/s2 (4 times on 3 axes)

Shock resistance Min. 980m/s2 (5 times on 3 axes)

Functional

Destructive

10 to 55Hz: 1 cycle/min double amplitude of 0.25mm (10min on 3 axes)

Vibration resistance 10 to 55Hz: 1 cycle/min double amplitude of 0.375mm (1hr on 3 axes)

Functional

Destructive

Between live and dead metal parts

Between input and output

Between contacts of different poles (*3)

Between contacts of same pole

Insulation resistance (Initial value)

1,500Vrms for 1 min Between live and dead metal parts

1,500Vrms for 1 min Between input and output

1,000Vrms for 1 min Between contacts of different poles (*3)

750Vrms for 1 min Between contacts of same pole

Breakdown voltage (Initial value)

Setting error

Voltage error

Contact resistance (Initial value)

50msMin. reset time

s range type: 100ms

min range type: 2s

Min. power supply width

55°C 131°FMax. temperature rise

Au flash on Silver alloyContact material

Temperature error

Timed-out 1 Form CTimed-out 2 Form C Timed-out 2 Form CContact arrangement

Operation mode

Approx. 1.6VA (100 to 120V AC, 200 to 240V AC), Approx. 2.3VA (24V AC)

Approx. 1.1W (12V DC, 24V DC)

Rated power consumption

Rating

Time

accuracy *1

Contact

Life

Electrical

function

Mechanical

function

Operating

condition

Others

PM4H-F11R

Min. 100MΩ(At 500V DC)

*Notes: 1) Unless otherwise specified, the measurement conditions at the maximum scale time standard are specified to be the rated operating voltage (within 5% ripple

factor for DC), 20°C 68°F ambient temperature.

2) For the 1s range, the tolerance for each specification becomes ±10ms. When the power goes on, in rush current (0.3A) flows. Cautions should be taken. The

minimum power supplying time after forced reset input is 2s or more.

3) Between contacts of different pools for PM4H-F8, PM4H-F11R types only.

UL File No.: E122222

CSA File No.: LR39291

DIN48 SIZE ANALOG

MULTIRANGE POWER

OFF-DELAY TIMERS PM4H-F

RoHS Directive compatibility information

http://www.nais-e.com/

PM4H-F

Product types

PM4H-F8

Type Contact arrangement Time range Part number

Rated operating

voltage

Protective

construction

Terminal

type

Operation

mode

PM4HF8-S-AC120VW

PM4HF8-S-AC240VW

PM4HF8-S-AC24VW

PM4HF8-S-DC12VW

PM4HF8-S-DC24VW

PM4HF8-M-AC120VW

PM4HF8-M-AC240VW

PM4HF8-M-AC24VW

PM4HF8-M-DC12VW

PM4HF8-M-DC24VW

PM4HF8-S-AC120V

PM4HF8-S-AC240V

PM4HF8-S-AC24V

PM4HF8-S-DC12V

PM4HF8-S-DC24V

PM4HF8-M-AC120V

PM4HF8-M-AC240V

PM4HF8-M-AC24V

PM4HF8-M-DC12V

PM4HF8-M-DC24V

PM4HF8R-S-AC120VW

PM4HF8R-S-AC240VW

PM4HF8R-S-AC24VW

PM4HF8R-S-DC12VW

PM4HF8R-S-DC24VW

PM4HF8R-M-AC120VW

PM4HF8R-M-AC240VW

PM4HF8R-M-AC24VW

PM4HF8R-M-DC12VW

PM4HF8R-M-DC24VW

PM4HF8R-S-AC120V

PM4HF8R-S-AC240V

PM4HF8R-S-AC24V

PM4HF8R-S-DC12V

PM4HF8R-S-DC24V

PM4HF8R-M-AC120V

PM4HF8R-M-AC240V

PM4HF8R-M-AC24V

PM4HF8R-M-DC12V

PM4HF8R-M-DC24V

8 pins

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

3 selectable time ranges

over 1s to 10s

Relay Timed-out

2 Form C

Power

OFF-delay

(without reset)

PM4H-F8R Relay Timed-out

1 Form C

Power

OFF-delay

(with

instantaneous

reset)

3 selectable time ranges

over 1 min to 10 min

3 selectable time ranges

over 1s to 10s

3 selectable time ranges

over 1 min to 10 min

3 selectable time ranges

over 1s to 10s

3 selectable time ranges

over 1 min to 10 min

3 selectable time ranges

over 1s to 10s

3 selectable time ranges

over 1 min to 10 min

IP65

IP50

IP65

IP50

Time range

unit

0.04s to 1s

0.2s to 5s

0.4s to 10s

0.04 min to 1 min

0.2 min to 5 min

0.4 min to 10 min

s range type min range type

PM4H-F

PM4H-F11R

Type Contact arrangement Time range Part number

Rated operating

voltage

Protective

construction

Terminal

type

Operation

mode

PM4HF11R-S-AC120VW

PM4HF11R-S-AC120VSW

PM4HF11R-S-AC240VW

PM4HF11R-S-AC240VSW

PM4HF11R-S-AC24VW

PM4HF11R-S-AC24VSW

PM4HF11R-S-DC12VW

PM4HF11R-S-DC12VSW

PM4HF11R-S-DC24VW

PM4HF11R-S-DC24VSW

PM4HF11R-S-AC120V

PM4HF11R-S-AC120VS

PM4HF11R-S-AC240V

PM4HF11R-S-AC240VS

PM4HF11R-S-AC24V

PM4HF11R-S-AC24VS

PM4HF11R-S-DC12V

PM4HF11R-S-DC12VS

PM4HF11R-S-DC24V

PM4HF11R-S-DC24VS

PM4HF11R-M-AC120VW

PM4HF11R-M-AC120VSW

PM4HF11R-M-AC240VW

PM4HF11R-M-AC240VSW

PM4HF11R-M-AC24VW

PM4HF11R-M-AC24VSW

PM4HF11R-M-DC12VW

PM4HF11R-M-DC12VSW

PM4HF11R-M-DC24VW

PM4HF11R-M-DC24VSW

PM4HF11R-M-AC120V

PM4HF11R-M-AC120VS

PM4HF11R-M-AC240V

PM4HF11R-M-AC240VS

PM4HF11R-M-AC24V

PM4HF11R-M-AC24VS

PM4HF11R-M-DC12V

PM4HF11R-M-DC12VS

PM4HF11R-M-DC24V

PM4HF11R-M-DC24VS

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

11 pins

Screw terminal

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

100 to 120V AC

200 to 240V AC

24V AC

12V DC

24V DC

3 selectable time ranges

over 1s to 10s

Relay Timed-out

2 Form C

Power

OFF-delay

(with

instantaneous

reset)

3 selectable time ranges

over 1 min to 10 min

IP65

IP50

IP65

IP50

Dimensions

•Screw terminal type (Flush mount) •Pin type (Flush mount/surface mount)

.236

6.0

1.890 62.5

2.461

12.0

.472

41 dia.

1.614 dia.

1.890 44.5

1.752

.236

6.0 66.5

2.618

12.0

.472

1.890

41 dia.

1.614 dia.

44.5

1.752

1.890

14.5

.571

mm inch

Toletance: ±0.5 ±.020

PM4H-F

Terminal layouts and Wiring diagrams

•PM4H-F8 (without reset input)

Pin type

Time-out 2 Form C

Screw-tightening pin type

The PM4H-F11R should be used for the time-

limit 2C.

Screw-tightening pin type

The PM4H-F11R should be used for the time-

limit 1C and to connect reset input.

PM4H-F (with reset) input conditions

1. Contact input (pin type example) 2. Non-contact input (pin type example)

•PM4H-F8R (with reset input)

Pin type

Time-out 1 Form C, with reset input

•PM4H-F11R (with reset input)

Pin type

Time-out 2 Form C, with reset input

Screw terminal type

Time-out 2 Form C, with reset input

(–) (+)

N.O.

N.C.

Operating voltage

N.O.

N.C.

Reset

input

(–) (+)

Operating voltage

N.O.

N.C.

211110

N.O.

Reset input

(–) (+)

Operating voltage

N.C.

N.O.

N.C. N.O.

54321

109876

(–)

(+)

Operating

voltage

Reset input

Photo-coupler

PM4H-F8R PM4H-F11R PM4H-F8R PM4H-F11R

Use a contact with good contact relia-

bility for the input. Contact bounce can

lead to erroneous operation of the

timer, so use a contact with short

bounce time. Make the resistance

between terminals for a short circuit

less than 1k-ohms. Make the resis-

tance between terminals for an open

circuit greater than 100k-ohms.

Be sure to use a photo-

coupler for non-contact

input.

Check that Vce = 0.6V

Max. when ON.

•PM4H-F8 (without reset input) •PM4H-F8R/F11R (with reset input)

Operation

Power

supply

Time-delay

contact N.O.

Time-delay

contact N.C.

Power

supply

Reset

input

Time-delay

contact N.O.

Time-delay

contact N.C.

Tr TrTs Ts

Note: Note:

t<T: Time setting

Tr: Minimum power supply application time

Note: Ts: Min. 2s (Time to restart operation after reset input is set

to OFF: both second type and minute type)

1. Operation method

1) Operation mode setting

[PM4H-A type]

8 operation modes are selectable with

operation mode selector.

Turn the operation mode selector with

screw driver.

Operation mode is shown up through the

window above the mode selector. The

marks are , , , , , , , .

Turn the mode selector to the mark until

you can check by clicking sound.

Confirm the mode selector position if it is

correct.

If the position is not stable, the timer

might mis-operate.

2) Time range setting

[PM4H series common]

16 time ranges are selectable between

1s to 500h.

Turn the time range selector with the

screw driver.

Clockwise turning increases the time

range, and Counter-clockwise turning

decrease the time range.

Confirm the range selector position if it is

correct.

If the position is not stable, the timer

might mis-operate.

3) Time setting [common]

To set the time, turn the set dial to a

desired time within the range.

Instantaneous output will be on when the

dial is set to “0”.

When the instantaneous output is used,

the dial should be set under “0” range.

(Instantaneous output area)

When power supply is on, the time

range, setting time and operation mode

cannot be changed.

Turn off the power supply or a reset sig-

nal is applied to set the new operation

mode.

If the position is not stable, the timer

might mis-operate.

ON FL FO

OF1

SF OS

OF2

2. How to use “Set ring” [PM4H series common]

1) Fixed time setting

Set the desired time and put 2 set rings

together.

Insert the rings into stopper to fix the

time.

2) Time range setting

Example: Time range 20s to 30s.

Shorter time value setting

Set the dial to 20s.

Place the stop ring at the right side of

stopper.

Longer time value setting

Set the dial to 30s.

Place the stop ring at the left side of

stopper.

Set range

Applicable standard (PM4H series common)

Set dial

Set ring (2 pcs)

ATC18001 (sold separately)

Stopper boss

Stopper

Stop ring

Stopper boss

Longer time value

SEC

Shorter time value

SEC

PM4H SERIES MODES AND TIME SETTING

Note) The stoppers for the lower limit setting set ring and the upper limit setting set ring face the opposite directions.

Safety standard EN61812-1 Pollution Degree 2/Overvoltage Category III

EMC

(EMI)EN61000-6-4

Radiation interference electric field strength

Noise terminal voltage

(EMS)EN61000-6-2

Static discharge immunity

RF electromagnetic field immunity

EFT/B immunity

Surge immunity

Conductivity noise immunity

Power frequency magnetic field immunity

Voltage dip/Instantaneous stop/Voltage fluctuation immunity

EN55011 Group1 ClassA

EN61000-4-2 4 kV contact

8 kV air

EN61000-4-3 10 V/m AM modulation (80 MHz to 1 GHz)

10 V/m pulse modulation (895 MHz to 905 MHz)

EN61000-4-4 2 kV (power supply line)

1 kV (signal line)

EN61000-4-5 1 kV (power line)

EN61000-4-6 10 V/m AM modulation (0.15 MHz to 80 MHz)

EN61000-4-8 30 A/m (50 Hz)

EN61000-4-11 10 ms, 30% (rated voltage)

100 ms, 60% (rated voltage)

1,000 ms, 60% (rated voltage)

5,000 ms, 95% (rated voltage)

PM4H-W

Features

1. A single twin timer unit that repeats (variable) ON/OFF.

2. Multiple ranges with a 0.1 s to 500 h time specification on a single unit.

3. The output ON/OFF operation is indicated by red and green LED’s.

It’s easy to check the operation at a glance.

4. The AC free power supply and shorter body make it easier to use.

5. A new screw terminal type has been added to the conventional pin type.

Wiring can be done easily with a screwdriver.

6. Compliant with UL, CSA, CE and LLOYD.

1.890

62.5

2.461

mm inch

Specifications

Type

Item PM4H-W

100 to 240V AC, 48 to 125V DC, 12V DC, 24V AC/DCRated operating voltage

50/60Hz common (AC operating type)

5A 250V AC (resistive load)

Cyclic (OFF-start/Twin operation)

Rated frequency

Rated control capacity

1s to 500h 16 time ranges switchable (T1, T2 time setting individually)

±0.3% (power off time change at the range of 0.3s to 1h)

±5% (Full-scale value)

±0.5% (at the operating voltage changes between 85 to 110%)

Max. 100mΩ (at 1A 6V DC)

Timed-out 2 Form C

±2% (at 20°C ambient temp. at the range of –10 to +50°C +14 to 122°F)

Time range

Operation time fluctuation

2×107

105 (at rated control capacity)

Mechanical (contact)

Electrical (contact)

85 to 110% of rated operating voltage (at 20°C coil temp.)Allowable operating voltage range

–10 to +50°C +14 to +122°FAmbient temperature

30 to 85%RH (non-condensing)Ambient humidity

860 to 1,060hPaAtmospheric pressure

20%Ripple factor (DC type)

IP65 on front panel (using rubber gasket ATC18002) <only for IP65 type>Protective construction

120g 4.233 oz (Pin type), 130g 4.586 oz (Screw terminal type)Weight

10 to 55Hz: 1 cycle/min double amplitude of 0.25mm (10min on 3 axes)

Vibration resistance 10 to 55Hz: 1 cycle/min double amplitude of 0.375mm (1h on 3 axes)

Min. 98m/s2 (4 times on 3 axes)

Shock resistance Min. 980m/s2 (5 times on 3 axes)

Functional

Destructive

Functional

Destructive

Between live and dead metal parts

Between input and output

Between contacts of different poles

Between contacts of same pole

Insulation resistance (Initial value)

2,000Vrms for 1 min Between live and metal parts

2,000Vrms for 1 min Between input and output

2,000Vrms for 1 min Between contacts of different poles

1,000Vrms for 1 min Between contacts of same pole

Breakdown voltage (Initial value)

Setting error

Voltage error

Contact resistance (Initial value)

300msMin. power off time

55°C 131°FMax. temperature rise

Silver alloyContact material

Temperature error

Contact arrangement

Operation mode

Approx. 10VA (100 to 240V AC)

Approx. 2.5VA (24V AC)

Approx. 1.5W (12V DC, 24V DC, 48 to 125V DC)

Rated power consumption

Rating

Time

accuracy

Note:)

Contact

Life

Electrical

function

Mechanical

function

Operating

condition

Others

Min. 100MΩ(At 500V DC)

Notes: 1) Unless otherwise specified, the measurement conditions at the maximum scale time standard are specified to be the rated operating voltage (within 5% ripple

factor for DC), 20°C 68°F ambient temperature, and 1s power off time.

2) For the 1s range, the tolerance for each specification becomes ±10ms.

3) As internal components may become worn when using continuous conduction, the product should be replaced periodically.

UL File No.: E122222

CSA File No.: LR39291

DIN48 SIZE

ANALOG MULTI-LANGE

CYCLIC TWIN TIMERS PM4H-W

RoHS Directive compatibility information

http://www.nais-e.com/

PM4H-W

Product types

PM4H-W

Twin timer

Type Contact arrangement Time range Part number

Rated Operating

voltage

Protective

structure

Terminal

type

Operating

mode

PM4HW-H-AC240VW

PM4HW-H-AC240VSW

PM4HW-H-DC125VW

PM4HW-H-DC125VSW

PM4HW-H-24VW

PM4HW-H-24VSW

PM4HW-H-DC12VW

PM4HW-H-DC12VSW

PM4HW-H-AC240V

PM4HW-H-AC240VS

PM4HW-H-DC125V

PM4HW-H-DC125VS

PM4HW-H-24V

PM4HW-H-24VS

PM4HW-H-DC12V

PM4HW-H-DC12VS

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

8 pins

Screw terminal

100 to 240V AC

48 to 125V DC

24V AC/DC

12V DC

100 to 240V AC

48 to 125V DC

24V AC/DC

12V DC

16 selectable ranges

(1s to 500h)

Relay

Timed-out

2 Form C

Cyclic

(OFF-start,

Twin)

IP65

IP50

Terminal layouts and Wiring diagrams

Dimensions mm inch

Toletance: ±0.5 ±.020

Pin Type

Cyclic timed-out relay contact: 2C

Screw terminal type

Cyclic timed-out relay contact: 2C

Operation

(–) (+)

N.C.

N.O.

Operating voltage

N.C.

N.O.

N.C. N.O.

54321

109876

(–)

(+) Operating

voltage

1.890 62.5

2.461

17.0

.670

6.0

.236

1.890

∅41

∅1.614

44.5

1.752

17.0

.670

6.0

.236

1.890

66.5

2.618 14.5

.571

∅41

∅1.614

44.5

1.752

Power supply

Time-delay contact

(N.O. contact)

Time-delay contact

(N.C. contact)

Output ON-OFF

indicator

T1 T1T2

Output OFF indicator (green)

Output ON indicator (orange)

OFF set time

ON set time

T1:

T2:

All types of PM4H-W timer have multi-time range.

16 time ranges are selectable.

1s to 500h (Max. range) is controlled.

Time range

Scale

Time unit

0.1s to 1s

sec min hrs 10h

0.1 min to 1 min 0.1h to 1h 1.0h to 10h

5 0.5s to 5s

Control

time range

0.5 min to 5 min 0.5h to 5h 5h to 50h

10 1.0s to 10s 1.0 min to 10 min 1.0h to 10h 10h to 100h

50 5s to 50s 5 min to 50 min 5h to 50h 50h to 500h

• Screw terminal type: M3.5 • Pin type

1. Operation method

1) Operation mode setting

[PM4H-A type]

8 operation modes are selectable with

operation mode selector.

Turn the operation mode selector with

screw driver.

Operation mode is shown up through the

window above the mode selector. The

marks are , , , , , , , .

Turn the mode selector to the mark until

you can check by clicking sound.

Confirm the mode selector position if it is

correct.

If the position is not stable, the timer

might mis-operate.

2) Time range setting

[PM4H series common]

16 time ranges are selectable between

1s to 500h.

Turn the time range selector with the

screw driver.

Clockwise turning increases the time

range, and Counter-clockwise turning

decrease the time range.

Confirm the range selector position if it is

correct.

If the position is not stable, the timer

might mis-operate.

3) Time setting [common]

To set the time, turn the set dial to a

desired time within the range.

Instantaneous output will be on when the

dial is set to “0”.

When the instantaneous output is used,

the dial should be set under “0” range.

(Instantaneous output area)

When power supply is on, the time

range, setting time and operation mode

cannot be changed.

Turn off the power supply or a reset sig-

nal is applied to set the new operation

mode.

If the position is not stable, the timer

might mis-operate.

ON FL FO

OF1

SF OS

OF2

2. How to use “Set ring” [PM4H series common]

1) Fixed time setting

Set the desired time and put 2 set rings

together.

Insert the rings into stopper to fix the

time.

2) Time range setting

Example: Time range 20s to 30s.

Shorter time value setting

Set the dial to 20s.

Place the stop ring at the right side of

stopper.

Longer time value setting

Set the dial to 30s.

Place the stop ring at the left side of

stopper.

Set range

Applicable standard (PM4H series common)

Set dial

Set ring (2 pcs)

ATC18001 (sold separately)

Stopper boss

Stopper

Stop ring

Stopper boss

Longer time value

SEC

Shorter time value

SEC

PM4H SERIES MODES AND TIME SETTING

Note) The stoppers for the lower limit setting set ring and the upper limit setting set ring face the opposite directions.

Safety standard EN61812-1 Pollution Degree 2/Overvoltage Category III

EMC

(EMI)EN61000-6-4

Radiation interference electric field strength

Noise terminal voltage

(EMS)EN61000-6-2

Static discharge immunity

RF electromagnetic field immunity

EFT/B immunity

Surge immunity

Conductivity noise immunity

Power frequency magnetic field immunity

Voltage dip/Instantaneous stop/Voltage fluctuation immunity

EN55011 Group1 ClassA

EN61000-4-2 4 kV contact

8 kV air

EN61000-4-3 10 V/m AM modulation (80 MHz to 1 GHz)

10 V/m pulse modulation (895 MHz to 905 MHz)

EN61000-4-4 2 kV (power supply line)

1 kV (signal line)

EN61000-4-5 1 kV (power line)

EN61000-4-6 10 V/m AM modulation (0.15 MHz to 80 MHz)

EN61000-4-8 30 A/m (50 Hz)

EN61000-4-11 10 ms, 30% (rated voltage)

100 ms, 60% (rated voltage)

1,000 ms, 60% (rated voltage)

5,000 ms, 95% (rated voltage)

1. Input connections (PM4H-A type)

1) Be sure not to use terminal as the

common terminal of the input signal as

shown in Fig. A. Otherwise, the internal

circuit of the timer may be damaged.

Use terminal as the common terminal

as shown in Fig. B.

If the circuits is connected as in Fig. C,

the internal circuits must be broken. Be

sure to connect the circuit as in Fig. D.

2) When one input signal is simultane-

ously applied to more than one timer, be

sure to avoid the wiring shown in Fig. E.

Otherwise, the short-circuit current will

flow and cause damage. Be sure to align

the polarity of the power supply as

shown in Fig. F.

3) Terminal -(screw terminal x-c)

should be connected as the start input.

Connect terminals -(screw terminal

x-v) for reset signal input. Connect ter-

minals -(screw terminal x-b) for

stop signal input. Be sure not to connect

with other terminals and apply excessive

voltage. The internal circuit will be dam-

aged.

4) The input wiring other than the power

supply circuit should avoid these condi-

tions, high-voltage wiring and parallel

wiring with power wire. Wire in short with

using the shielding wire or metal wiring

tube.

5) For start, reset and stop input, use

gold-plated contact with high reliability.

Since contact bouncing causes errors in

the start, use an input contact less

bounce time.

6) Keep the minimum signal input time

over 0.05 s.

2. Input signal conditions

(PM4H-A type)

1) Connection of contact input (Pin type

example

Use gold-plated contacts with high-relia-

bility. The bounce time at the contacts

causes errors in the timer operation time.

Accordingly, use start input contact

whose bounce time is short. The resis-

tance when shorted should be less than

1kΩ, and when open resistance should

be more than 100kΩ.

For the screw terminal type, connect the

terminal xto the each input signal.

2) Connection of non-contact input (Pin

type example)

(open-collector)

Apply the open-collector connection. The

characteristics of the transistor used

must be VCEO=10V or more, IC=10mA or

more, and ICBO=6µA or less. Additionally,

the input impedance must be 1kΩor

less, and the residual voltage must be

0.6V or less.

For the screw terminal type, connect the

terminal xto the each input signal.

3) Connection of non-contact input (Pin

type example)

(voltage input)

Even if the open collector is not used,

input is also possible from the non-con-

tact circuit of 6 to 30V DC. In this case,

the start input is turned on when the sig-

nal is turned from H to L.

The residual voltage must be 0.6V or

less when Q is on. On the AC type, an

insulated transformer is required as the

power supply for the photoelectric sen-

sor, etc. (power supply for the input

devices).

Note: Keep the minimum input signal time of

each signal to 0.05s or more.

3. Checking the contacts before use

(PM4H-F only)

When the power ON time is less than the

minimum power application time, the

contacts may remain in an ON state, so

the state of the contacts should be

checked before use. When the contacts

are in an ON state, activating them once

will return them to their normal state (the

OFF state after time-out). (Be aware that

relay characteristics may result in the

contacts being in that same ON state if

exposed to excessive vibration and

impact during transport.)

4. Time setting

To set the time, turn the set dial to a

desired time within the range.

Instantaneous output will be on when the

dial is set to “0”.

When the instantaneous output is used,

the dial should be set under “0” range.

(Instantaneous output area)

Note) When power supply is on, the time

range, setting time and operation mode

cannot be changed.

Turn off the power supply or a reset sig-

nal is applied to set the new operation

mode.

If the position is not stable, the timer

might mis-operate.

Fig. C

Fig. D

Good

No good

Fig. E

Fig. F

Good

No good

Contact or

non-contact input

Power

supply

Power

supply

Input

terminal

Input

terminal

Input

terminal

Input

terminal

Reset input

Start input

Stop input

Fig. B

Fig. A

No good

Good

Operating

voltage

Operating

voltage

Contact input

(or non-contact

input)

Contact input

(or non-contact

input)

PRECAUTIONS IN USING THE PM4H SERIES

Reset input

Start input

Stop input

Internal circuit

with photoelectric

sensor, etc.

[Example of

start input]

(The start input

is turned on.)

1mA

PRECAUTIONS IN USING THE PM4H SERIES

5. Superimposed surge of power

supply (PM4H series common)

For the superimposed surge of power

supply, the standard waveform is taken

as the standard value for surge-proof

voltage.

If external surge occurs exceeding the

specified value, the internal circuit may

break down. In this case, use a surge

absorption element.

The positive and negative voltages are

applied each five times between the

power pins.

The typical surge absorption elements

include a varistor, a capacitor, and a

diode. If a surge absorption element is

used, use an oscilloscope to see

whether or not the foreign surge exceed-

ing the specified value appears.

6. Acquisition of CE marking

Please abide by the conditions below

when using in applications that comply

with EN61812-1.

1) Overvoltage category III, pollution

level 2

2) This timer employs a power supply

without a transformer, so the power and

input signal terminals are not insulated.

(PM4H-A only)

(1) When a sensor is connected to the

input circuit, install double insulation on

the sensor side.

(2) In the case of contact input, use dual-

insulated relays, etc.

3) The load connected to the output con-

tact should have basic insulation.

This timer is protected with basic insula-

tion and can be double-insulated to meet

EN/IEC requirements by using basic

insulation on the load.

4) Please use a power supply that is pro-

tected by an overcurrent protection

device which complies with the EN/IEC

standard (example: 250 V 1 A fuse, etc.).

5) You must use a terminal socket or

socket for the installation. Do not touch

the terminals or other parts of the timer

when it is powered. When installing or

un-installing, make sure that no voltage

is being applied to any of the terminals.

6) Do not use this timer as a safety cir-

cuit. For example when using a timer in a

heater circuit, etc., provide a protection

circuit on the machine side.

Operation voltage

100 to 240V AC

100 to 120V AC

200 to 240V AC

48 to 125V DC

Surge voltage

4,000V

12V DC, 24V DC

24V AC/DC 500V