ISOLOOP(R) IL711/712 NVE CORPORATION Dual Digital Isolator Features 1IN 2IN GALVANIC ISOLATION Functional Diagram 1OUT 2OUT IL711 2OUT Applications GALVANIC ISOLATION 1IN * +5V and +3.3V CMOS Compatible * 2 ns Typical Pulse Width Distortion * 10 ns Typical Propagation Delay * High Speed: 100 MBaud * 2 ns Channel to Channel Skew * 30 kV/s Typical Transient Immunity * 2500VRMS Isolation (1 min) * 8-pin PDIP and 8-pin SOIC Packages * UL1577 Approved (File # E207481) * IEC 61010-1 Approved (Report # 607057) 1OUT 2IN IL712 Ordering Information Package Type 8-PDIP 8-SOIC IL711 -2 -3 IL712 -2 -3 IL711-2 is 8-PDIP package IL712-3 is an 8-SOIC package * Isolated Data Transmission * Isolated ADCs and DACs * Fieldbus Isolation * High Speed Digital Systems * Computer Peripheral Interfaces * Logic Level Shifting Description The IL711 and IL712 offer the user a level of true logic integration in an isolation product not previously available. The high speed digital isolators are configured as dual unidirectional in the IL711, and as a bi-directional pair in the IL712. Both devices are integrated with patented* ISOLOOP(R) technology giving them an excellent transient immunity specification. The symmetric magnetic coupling barrier gives these devices a propagation delay of only 10ns and a pulse width distortion of 2 ns. Model Isoloop(R) is a registered trademark of NVE Corporation Both the IL711 and the IL712 have 100Mbaud data rates which are independent of direction, i.e. the IL712 operates in full duplex mode making it ideal for many fieldbus bus applications. PROFIBUS / RS485 configurations are achieved by combinations of IL710 and the IL711 or IL712, either combination meeting the overall propagation delay requirements of the specification. Available in 8pin PDIP and 8-pin SOIC packages, the IL711 and IL712 are specified over the temperature range of -40C to +100C without any derating in performance. * US Patent number 5,831,426; 6,300,617 and others 1 RHOPOINT COMPONENTS Hurst Green, Oxted, Surrey RH8 9AX UK Telephone: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255 Internet: www.rhopointcomponents.com ISOLOOP(R) IL711/712 Absolute Maximum Ratings Parameters Storage Temperature Symbol TS Ambient Operating Temperature(1) Min. -55 Max. 175 Units o C o TA -55 125 VDD1,VDD2 -0.5 7 Volts Input Voltage VI -0.5 VDD1+0.5 Volts Input Voltage VOE -0.5 VDD2+0.5 Volts Output Voltage VO -0.5 VDD2+0.5 Volts Drive Channel Output Current IO 10 mAmps Supply Voltage Lead Solder Temperature(10s) ESD C o 260 2kV Human Body Model C Recommended Operating Conditions Parameters Ambient Operating Temperature Supply Voltage Symbol TA Min. -40 VDD1,VDD2 3.0 5.5 Volts VIH 2.4 VDD1 Volts VIL 0 0.8 Volts 1 sec Logic High Input Voltage Logic Low Input Voltage Input Signal Rise and Fall Times Max. 100 tIR,tIF Units o C Insulation Specifications Parameter Barrier Impedance Condition Min. Typ. >1014 ||3 Max. 7.036 (PDIP) 4.026 (SOIC) Creepage Distance (External) 240 VRMS Leakage Current Units || pF mm Amps 0.2 60Hz Package Characteristics Parameter Capacitance (Input-Output)(5) Thermal Resistance Symbol CI-O Min. Typ. 2 JCT JCT (PDIP) (SOIC) Package Power Dissipation Max. Units pF o 150 240 C/W C/W o PPD 150 Test Conditions f= 1MHz Thermocouple located at center underside of package mW IEC61010-1 TUV Certificate Numbers: B 01 07 44230 001 (PDIP) B 01 07 44230 002 (SOIC) Classification as Table 1. Model IL710-2, IL711-2 IL710-3, IL711-3 Pollution Degree II II Material Group III III Max Working Voltage 300 VRMS 150 VRMS Package Type 8-PDIP 8-SOIC ' ' UL 1577 Component Recognition program. File # E207481 Rated 2500Vrms for 1min. 2 RHOPOINT COMPONENTS Hurst Green, Oxted, Surrey RH8 9AX UK Telephone: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255 Internet: www.rhopointcomponents.com ISOLOOP(R) IL711/712 Electrical Specifications Electrical Specifications are Tmin to Tmax unless otherwise stated. Parameter Symbol 3.3 Volt Specifiations DC Specifications Min. IL711 Input Quiescent Supply Current IDD1 IL712 Output Quiescent Supply Current IL711 IL712 Logic Input Current IDD Logic High Output Voltage VOH Logic Low Output Voltage VOL 2 II Typ. 9 Max. 14 2.2 2.2 3.3 3.3 2.2 3.3 10 -10 VDD-0.1 VDD 0.8*VDD VDD-0.5 0 0.5 Switching Specifications Maximum Data Rate 100 PW 5Volt Specifications Min. Max. 20 A 3 4 5 5 mA mA 3 5 10 mA A -10 VDD-0.1 VDD 0.8*VDD VDD-0.5 0.1 0.8 110 0 0.5 100 10 Units Typ. 12 Test Conditions V IO =-20 A, VI =VIH I = -4 mA, V =V V IO = 20 A, VI =VIL I = 4 mA, V =V O 0.1 0.8 110 O MBd 10 I I IH IL CL = 15 pF Pulse Width Propagation Delay Input to Output (High to Low) ns tPHL 12 18 10 15 ns CL = 15 pF Propagation Delay Input to Output ( Low to High) tPLH 12 18 10 15 ns CL = 15 pF (2) Pulse Width Distortion | tPHL- tPLH | PWD 2 3 2 3 ns CL = 15 pF Propagation Delay Skew(3) tPSK 4 6 4 6 ns CL = 15 pF Output Rise Time (10-90%) tR 2 4 1 3 ns CL = 15 pF Output Fall Time (10-90%) tF 2 4 1 3 ns CL = 15 pF kV/s Vcm =300V ns CL = 15 pF Transient Immunity (Output Logic High or Logic Low)(4) Channel to Channel Skew |CMH| |CML| TCSK 20 30 20 2 3 30 2 3 Timing Diagram 50% VIN tPLH tPHL 90% 90% 50% VO 10% tPW 10% tF tR Legend tPLH tPHL tPW tR tF Propagation Delay, Low to High Propagation Delay, High to Low Minimum Pulse Width Rise Time Fall Time 3 RHOPOINT COMPONENTS Hurst Green, Oxted, Surrey RH8 9AX UK Telephone: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255 Internet: www.rhopointcomponents.com ISOLOOP(R) IL711/712 Notes: Application Notes: 1. Absolute Maximum ambient operating temperature means the device will not be damaged if operated under these conditions. It does not guarantee performance. 2. PWD is defined as | tPHL- tPLH |. %PWD is equal to the PWD divided by the pulse width. 3. tPSK is equal to the magnitude of the worst case difference in tPHL and/or tPLH that will be seen between units at 25OC. 4. CMH is the maximum common mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD. CML is the maximum common mode input voltage that can be sustained while maintaining VO < 0.8 V. The common mode voltage slew rates apply to both rising and falling common mode voltage edges. 5. Device is considered a two terminal device: pins 1-4 shorted and pins 5-8 shorted. Power Consumption Isoloop devices achieve their low power consumption from the manner by which they transmit data across the isolation barrier. By detecting the edge transitions of the input logic signal and converting these to narrow current pulses a magnetic field is created around the GMR Wheatstone bridge. Depending on the direction of the magnetic field, the bridge causes the output comparator to switch following the input logic signal. Since the current pulses are narrow, about 2.5ns wide, the power consumption is independent of mark-to-space ratio and solely dependent on frequency. This has obvious advantages over optocouplers whose power consumption is heavily dependent on its on-state and frequency. The approximate power supply current per channel for Isoloop(R) is: I(input)= 40 . f . 1 mA fmax 4 where f= operating frequency fmax= 50 MHz Power Supplies Because the IL711 and IL712 operate internally by using narrow current pulses, it is recommended that low ESR ceramic capacitors be used to decouple the supplies. 47nF capacitors should be placed as close to the device as possible between VDD1 and GND1 as well as between VDD2 and GND2. Signal Status on Start-up and Shut Down To minimize power dissipation, the input signals to the IL711 and IL712 are differentiated and then latched on the output side of the isolation barrier to reconstruct the signal. This could result in an ambiguous output state depending on power up, shutdown and power loss sequencing. Therefore, the designer should consider the inclusion of an initialization signal in his start-up circuit. Electrostatic Discharge Sensitivity This product has been tested for electrostatic sensitivity to the limits stated in the specifications. However, NVE recommends that all integrated circuits be handled with appropriate care to avoid damage. Damage caused by inappropriate handling or storage could range from performance degradation to complete failure. 4 RHOPOINT COMPONENTS Hurst Green, Oxted, Surrey RH8 9AX UK Telephone: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255 Internet: www.rhopointcomponents.com ISOLOOP(R) IL711/712 IR Soldering Profile 250 PRE HEATING RATE 3C + 1C /-0.5C /SEC. REFLOW HEATING RATE 2.5 C 0.5C /SEC. PEAK TEMPERATURE 245 C PEAK TEMPERATURE 240 C PEAK TEMPERATURE 230C 200 C 2.5C 0.5C / SEC TEMPERATURE ( C ) 200 160C 150C 140C 30 SEC 3C+1C /-0.5C SOLDERING TIME 200C 30 SEC 50 SEC 100 PRE HEATING TIME 150C, 90 30 SEC. TIGHT TYPICAL ROOM TEMPERATURE LOOSE 0 0 50 100 150 200 250 TIME (SECONDS) Pin Connections 1 2 3 4 5 6 7 8 VDD1 1IN 2IN GND1 GND2 2OUT 1OUT VDD2 Input Power Supply Channel 1 Logic Input Signal Channel 2 Logic Input Signal Input Power Supply Ground Output Power Supply Ground Channel 2 Logic Output Signal Channel 1 Logic Output Signal Output Power Supply 1 2 3 4 5 6 7 8 VDD1 1IN 2OUT GND1 GND2 2IN 1OUT VDD2 Input Power Supply Channel 1 Logic Input Signal Channel 2 Logic Output Signal Input Power Supply Ground Output Power Supply Ground Channel 2 Logic Input Signal Channel 1 Logic Output Signal Output Power Supply VDD1 1 8 VDD2 1IN 2 7 1OUT 6 2OUT GND1 4 5 GND2 VDD1 1 8 VDD2 1IN 2 7 1OUT 6 2IN 5 GND2 2IN 3 2OUT 3 GND1 4 IL711 IL712 5 RHOPOINT COMPONENTS Hurst Green, Oxted, Surrey RH8 9AX UK Telephone: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255 Internet: www.rhopointcomponents.com ISOLOOP(R) IL711/712 IL711-2 and IL712-2 (8-Pin PDIP Package) 0.240 (6.096) Dimensions: inches (mm) min max 0.260 (6.604) 1 3 2 0.370 (9.398) 0.400 (10.160) 0.290 (7.366) 0.55 (1.397) 0.310 (7.874) 0.65 (1.651) 0.120 (3.048) 0.150 (3.810) 0.008 (0.203) 0.015 (0.381) 0.015 (0.381) 0.030 (0.762) 0.045 (1.143) 0.015 (0.380) 0.023 (0.584) 0.035 (0.889) 0.090 (2.286) 0.300 (7.620) 0.110 (2.794) 0.370 (9.398) 3 8 0.045 (1.143) 0.065 (1.651) IL711-3 and IL712-3 (Small Outline SOIC-8 package) 0.189 (4.80) 0 0.197 8 (5.00) 0.016 (0.40) 0.050 (1.27) 0.150 (3.80) 0.157 (4.00) 0.228 (5.80) 0.244 (6.20) 0.010 (0.25) 0.020 (0.50) x45 1 2 3 0.008 (0.19) 0.013 (0.33) 0.010 (0.25) 0.020 (0.51) 0.054 (1.37) Dimensions: inches (mm) min max 0.069 (1.75) 0.004 (0.10) 0.040 (1.016) 0.010 (0.25) 0.060 (1.524) 6 RHOPOINT COMPONENTS Hurst Green, Oxted, Surrey RH8 9AX UK Telephone: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255 Internet: www.rhopointcomponents.com ISOLOOP(R) IL711/712 Applications Isolated PROFIBUS / RS-485 +VISO +VDD1 RTSAS IL711 DE GALVANIC ISOLATION D VCC RS-485 Truth Table D DE A B 1 0 Z Z 0 0 Z Z 1 1 1 0 0 1 0 1 D RT DE R X X 1 0 A RE GND1 GALVANIC ISOLATION R R B RE GND IL710 65ALS176 (-40C to +85C) 75ALS176 (0C to +70C) GNDISO VDD1 and VISO should be decoupled with a 10nF capacitor at the IL710 supply pins and a 47 nF capacitor at the IL711. Isolated DeviceNet / CAN Transceiver +VDD1 +VISO TXD RXD GND1 GALVANIC ISOLATION TXD 0 1 IL712 TXD CANH CANL high low floating floating BUS dominant recessive RS CANH VREF CANL RXD 0 1 GND VCC PCA82C251 RXD GNDISO VDD1 and VISO should be decoupled with 47nF capacitors at the IL712 supply pins. 7 RHOPOINT COMPONENTS Hurst Green, Oxted, Surrey RH8 9AX UK Telephone: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255 Internet: www.rhopointcomponents.com