TEP 200-4816WIRCMF - TRACO Power

www.tracopower.com Page 1 of 5

DC/DC Converters

TEP 200WIR Series, 180 – 240 Watt

Features

◆ Chassis mount with screw terminal block

◆ Including EMI ﬁlter to meet

EN 55032, class A

◆ Ultra wide 4:1 input voltage ranges

9–36, 18–75, 43–160 VDC

◆ EN 50155 approval for railway

applications

◆ Very high efﬁciency up to 91%

◆ No minimum load

◆ Soft start

◆ Under voltage lock-out circuit

◆ Ajustable output voltage +10/-20%

◆ Sense line

◆ Remote On/Off input

◆ Reverse input voltage protection

◆ Over temperature protection

◆ 3-year product warranty

The TEP 200WIR Series is a family of isolated high performance dc-dc conver-

ter modules with ultra-wide 4:1 input voltage ranges. They come in chassis mount

version with screw terminal block and with integrated EMI input ﬁlter to meet

EN 55032 class A. A very high efﬁciency allows full power operation at 25°C

with only 100 LFM air ﬂow couling and operation at 60°C with only 40% power

derating.

The very wide input voltage range and reverse input voltage protection make these

converters interesting solution for battery operated systems. Typical applications

are in telecom/datacom, industry control and railway systems for on board power

distribution.

Order code Input voltage Output voltage Output current max. Efﬁciency typ.

TEP 200-2412WIRCMF 12 VDC 15 A 89 %

TEP 200-2413WIRCMF 9 – 36 VDC 15 VDC 12 A 90 %

TEP 200-2415WIRCMF (24 VDC nominal) 24 VDC 7. 5 A 90 %

TEP 200-2416WIRCMF 28 VDC 6.5 A 90 %

TEP 200-2418WIRCMF 48 VDC 3.7 A 89 %

TEP 200-4812WIRCMF 12 VDC 18 A 90 %

TEP 200-4813WIRCMF 18 – 75 VDC 15 VDC 14 A 91 %

TEP 200-4815WIRCMF (48 VDC nominal) 24 VDC 9 A 90 %

TEP 200-4816WIRCMF 28 VDC 7. 5 A 91 %

TEP 200-4818WIRCMF 48 VDC 4.5 A 90 %

TEP 200-7212WIRCMF 12 VDC 20 A 89 %

TEP 200-7213WIRCMF 43 – 160 VDC 15 VDC 16 A 90 %

TEP 200-7215WIRCMF (110 VDC nominal) 24 VDC 10 A 89 %

TEP 200-7216WIRCMF 28 VDC 8.5 A 90 %

TEP 200-7218WIRCMF 48 VDC 5 A 89 %

Standard Models

TEP-MK1 Din-rail mounting kit (incl. mounting screws)

Models with 3.3 VDC or 5.0 VDC output

on demand Models with 53 VDC output (input voltage range 33 - 75 VDC)

Models with 2:1 input voltage ranges: 8.5-22, 16.5-36, 33-75 VDC (only to optimize cost at high volumes)

(backorder with MOQ) Models for PCB mount (EMI Filter not included), optional heatsink and chokes for external ﬁlter

Negative (passive = Off) Remote On/Off function (standard is passive = On)

Options

www.tracopower.com Page 2 of 5

Input Specifications

Input current at no load (nominal input voltage) 24 V, 12 & 15 VDC models: 30 mA typ.

24 V, 24 VDC model: 35 mA typ.

24 V, 28 VDC model: 40 mA typ.

24 V, 48 VDC model: 45 mA typ.

48 V, 28 & 48 VDC models: 25 mA typ.

48 V, other models: 20 mA typ.

110 V, 28 & 48 VDC models: 15 mA typ.

110 V, other models: 10 mA typ.

Start-up voltage 24 V models: 9.0 VDC max.

48 V models: 18 VDC max.

110 V models: 43 VDC max.

Under voltage shut down (lock-out circuit) 24 V models: 7.3 – 8.1 VDC

48 V models: 15.5 – 16.3 VDC

110 V models: 33.0 – 36.0 VDC

Surge voltage (1 s max.) 24 V models: 50 VDC

48 V models: 100 VDC

110 V models: 185 VDC

Conducted noise EN 55032 class A without external components

EMC immunity EN 50121-3-2

– ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

– Radiated immunity EN 61000-4-3, 20 V/m, perf. criteria A

– Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±2 kV perf. criteria A,

24 / 48V models: chemi-con KY 220 µF, 100 V, ESR 48 mOhm

110 V models: ruby-con BXF 150 µF, 250 V

– Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Reverse voltage protection parallel diode ut

Recommended input fuse (fast blow) 24 V models: 32 A

48 V models: 20 A

110 V models: 10 A

Output Specifications

Voltage set accuracy (at full load, nominal input) ±1 %

Output voltage adjustment +10 % / –20 % by external resistor

– Application note www.tracopower.com/overview/tep200wir

Regulation – Input variation Vin min. to Vin max. 0.1 % max.

– Load variation (0 – 100 %) 12 / 15 VDC models: 0.25 % max.

24 – 48 VDC models: 0.2 % max.

Temperature coefficient ±0.02 %/K

Minimum load not required

Remote sense 10 % max. of Vout nom.

(trim up value to subtract)

Ripple and noise (20 MHz Bandwidth) 12 / 15 VDC models: 100 mVp-p typ.

24 / 28 VDC models: 200 mVp-p typ.

48 VDC models: 300 mVp-p typ.

Start up time (nominal Vin and constant resistive load) 75 ms typ. (at power On or remote On/Off)

Transient response (25 % load step change) 200 µs typ., 250 µs max.

Output current limitation at 120 – 150 % of Iout max.

Over voltage protection at 115 – 130 % of Vout nom.

Short circuit protection indefinite, automatic recovery.

DC/DC Converters

TEP 200WIR Series 180 – 240 Watt

www.tracopower.com Page 3 of 5

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

General Specifications

Temperature ranges – Operating (ambient) –40°C to +75°C

– Case temperature +115°C m a x.

– Storage –40°C to +105°C

Derating (convection cooling) depending on installation!

Guideline values: see Application note

Over temperature protection at +120°C

Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F

– Test conditions www.tracopower.com/products/mil810.pdf

Humidity (non condensing) 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign) 300‘000 h

Isolation voltage (60sec.) – Input/Output 2’250 VDC (basic insulation)

– Input/Case 1’600 VDC

Isolation capacitance – Input/Output 2500 pF max.

Isolation resistance – Input/Output (500 VDC) 1 GOhm min.

Switching frequency 250 kHz typ. (puls width modulation)

Safety standards – UL online certification E188913, QQGQ2 UL 60950-1 2nd edition + AM1

IEC/EN 60950-1

– Railway immunity EN 50155,

– Flamability identified acc. EN 45545-2

– Certification documents www.tracopower.com/overview/tep200wir

Remote On/Off – positive logic (standard) – On: 3 to 12 VDC or open circuit

– Off: 0 to 1.2 VDC

or short circuit pin 1 and 3

– negative logic (option) – On: 0 to 1.2 VDC

or short circuit pin 1 and 3

– Off: 3 to 12 VDC or open circuit

– Off idle current: 3 mA

Environmental compliance – Reach

www.tracopower.com/info/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

– Flammability identified acc. EN 45545-2

www.tracopower.com/info/en45545-declaration.pdf

Application note: www.tracopower.com/overview/tep200wir

DC/DC Converters

TEP 200WIR Series 180 – 240 Watt

Max. capacitive load [µF] 12 VDC 15 VDC 24 VDC 28 VDC 48 VDC

24 VDC Input models 12‘500 8‘000 3‘100 2‘300 770

48 VDC Input models 15‘000 9‘300 3‘700 2‘600 930

110 VDC Input models 16‘600 10‘600 4‘100 3‘000 1‘000

www.tracopower.com Page 4 of 5

Dimensions in Inch, () = mm

Tolerances ±0.02 (±0.5)

Pin pich tolerances ±0.01 (±0.25)

Mounting hole pich tolerances ±0.01 (±0.25)

The screw 1 locked torque:MAX 11.2kgf-cm/1.14N-m

The screw 2 locked torque:MAX 5.2kgf-cm/0.51N-m

The screw 3 locked torque:MAX 16.8kgf-cm/1.64N-m

Pin-Out

*Sense line to be connected

to the output either at the

module or at the load under

regard of polarity.

Weight: 287 g (10.12oz)

Dimensions

General Specifications

Casing material 24 Vin & 48 Vin models: metal

110 Vin models: Aluminium base-plate with plastic casing

Potting material Epoxy (UL94V-0 rated)

Base material FR4

DC/DC Converters

TEP 200WIR Series 180 – 240 Watt

1.33 (33.8)

screw 1

screw 2

screw 3

1.53 (38.8)

– Vin

Remote On/Off

+ Vin

– Vout

– Sense*

Trim

+ Sense*

+ Vout

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

Page 5 of 5

Options

DC/DC Converters

TEP 200WIR Series 180 – 240 Watt

TEP-MK1 DIN-rail clip for chassis mount models

1.33(33.8)

1.53(38.8)

1.87(47.5)

Rev. October 9, 2018

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TRACO Power:

TEP 200-4813WIRCMF TEP 200-4816WIRCMF TEP 200-7213WIRCMF TEP 200-4812WIRCMF TEP 200-

7212WIRCMF TEP 200-7218WIRCMF TEP 200-2418WIRCMF TEP 200-4818WIRCMF TEP 200-2416WIRCMF

TEP 200-2412WIRCMF TEP 200-7216WIRCMF TEP 200-2413WIRCMF TEP 200-2415WIRCMF TEP 200-

4815WIRCMF TEP 200-7215WIRCMF