RFVC7130 - Qorvo, Inc. - Product.Network

PAT

www.vishay.com Vishay Dale Thin Film

Revision: 01-Feb-17 1Document Number: 60024

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Precision Automotive Thin Film Chip Resistors,

AEC-Q200 Qualified, 2 kV ESD Rating

These chip resistors are available in wraparound

terminations styles in 8 case sizes. They incorporate self

passivated enhanced tantalum nitride resistor film to give

superior performance on moisture resistance, electrostatic

discharge, voltage coefficient, power handling and

resistance stability. The terminations consist of an adhesion

layer, a leach resistant nickel barrier, and solder coating

(lead (Pb)-free). This product will out-perform all

requirements of AEC-Q200.

CONSTRUCTION

FEATURES

• Resistance range: 2.5  to 3 M

• AEC-Q200 qualified

• AEC-Q200 ESD rated class 1C (2 kV)

• Laser trimmed to any value

• Moisture resistant to MIL-STD-202, method 202

• Tantalum nitride resistor film on high purity

alumina substrate

• 100 % visual inspected per MIL-PRF-55342

• Laser-trimmed tolerances to ± 0.1 %

• Load life stability < 0.05 % at 1000 h at 70 °C

• Very low noise and voltage coefficient

(< -30 dB, < 0.1 ppm/V)

• Sulfur resistant (per ASTM B809-95 humid vapor test)

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL PERFORMANCE

Adhesion Layer

High Purity

Alumina Substrate

Nickel Barrier

Solder

Coating

Passivation

T antalum Nitride

Resistive Film

ABSOLUTE

TCR 25

TOL. 0.1

STANDARD ELECTRICAL SPECIFICATIONS

TEST SPECIFICATIONS CONDITIONS

Material Tantalum nitride -

Resistance Range 2.5  to 3 M-

TCR: Absolute ± 25 ppm/°C to ± 100 ppm/°C -55 °C to +125 °C

Tolerance: Absolute ± 0.1 % to ± 1.0 % +25 °C

Stability: Absolute ± 0.05 % 2000 h at 70 °C rated power

Stability: Ratio Not applicable -

Voltage Coefficient Less than 0.1 ppm/V -

Working Voltage 75 V to 200 V -

Operating Temperature Range -55 °C to +155 °C -

Storage Temperature Range -55 °C to +155 °C -

Noise < -30 dB -

Shelf Life Stability: Absolute 100 ppm 1 year at 25 °C

COMPONENT RATINGS

CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE ()

0402 50 75 20 to 51K

0603 150 75 2.5 to 130K

0805 200 100 10 to 301K

1206 400 200 10 to 1M

1505 400 150 10 to 1M

2208 750 150 10 to 1.75M

2010 800 200 10 to 2M

2512 1000 200 10 to 3M

PAT

www.vishay.com Vishay Dale Thin Film

Revision: 01-Feb-17 2Document Number: 60024

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in inches

CASE SIZE L W T D E

0402 0.042 ± 0.008 0.022 ± 0.005 0.015 ± 0.003 0.010 ± 0.005 0.010 ± 0.005

0603 0.064 ± 0.006 0.032 ± 0.005 0.015 ± 0.003 0.012 ± 0.005 0.015 ± 0.005

0805 0.080 ± 0.006 0.050 ± 0.005 0.015 ± 0.003 0.015 ± 0.005 0.015 ± 0.005

1206 0.126 ± 0.008 0.063 ± 0.005 0.015 ± 0.003 0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010

1505 0.155 ± 0.007 0.050 ± 0.005 0.015 ± 0.003 0.015 ± 0.005 0.015 ± 0.005

2010 0.209 ± 0.009 0.098 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005

2208 0.230 ± 0.007 0.075 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005

2512 0.259 ± 0.009 0.124 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005

ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements)

ENVIRONMENTAL TEST CONDITIONS LIMITS

PER AEC-Q200

TYPICAL VISHAY

PERFORMANCE

Resistance Temperature Characteristic -55 °C to +125 °C ± 50 ppm/°C ± 35 ppm/°C

Max. Ambient Temp. at Rated Wattage +70 °C +70 °C

Max. Ambient Temp. at Power Derating +150 °C +150 °C

High Temperature Storage RMIL-STD-202, 108, 1000 h at 125 °C ± 0.1 % + 0.016 %

Temperature Cycling RJESD22, JA-104, 1000 cycles, -55 °C to +125 °C ± 0.15 % + 0.013 %

Moisture Resistance RMIL-STD-202, 106 ± 0.20 % + 0.0010 %

Biased Humidity RMIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P ± 0.10 % + 0.004 %

Life RMIL-STD-202, 108 at 125 °C, 1000 h ± 0.1 % + 0.0220 %

Mechanical Shock RMIL-STD-202, method 213, condition C ± 0.1 % + 0.004 %

Vibration RMIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.1 % + 0.0030 %

Resistance to Soldering Heat RMIL-STD-202 method 210, condition D ± 0.10 % + 0.0150 %

Electrostatic Discharge RAEC-Q200-002 at 2 kV, human body ± 0.10 % - 0.032 %

Solderability Visual J-STD-002, method B and B1 95 % Acceptable

Terminal Strength RAEC-Q200-006 at 1 kg for 60 s ± 0.10 % + 0.009 %

Flame Retardance Visual AEC-Q200-001 para 4.0 Acceptable

DERATING CURVE

Ambient Temperature °C

0155

100

Percent of Rated Power

70 125

PAT

www.vishay.com Vishay Dale Thin Film

Revision: 01-Feb-17 3Document Number: 60024

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Preferred packaging code

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: PAT1206E1002BST1

GLOBAL

MODEL

CASE

SIZE

TCR

CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING

PAT 0402

0603

0805

1206

1505

2010

2208

2512

E = ± 25 ppm/°C

H = ± 50 ppm/°C

K = ± 100 ppm/°C

L = ± 200 ppm/°C

The first 3 digits are

significant figures and

the last digit specifies

the number of zeros

to follow. “R”

designates the

decimal point.

Example:

10R0 = 10 

1000 = 100 

1002 = 10 k

B = ± 0.1 %

D = ± 0.5 %

F = ± 1.0 %

G = ± 2.0 %

J = ± 5.0 %

S = wraparound 

lead (Pb)-free 

solder

w/nickel barrier

TAPE AND REEL

T1 = 1000 min., 1000 mult (1)

TF = full reel

TS = 100 min., 1 mult

RESISTANCE TCR

(ppm/°C)

TOLERANCE

(%)

10  to 1 M25, 50, 100, 200 0.1, 0.5, 1, 2, 5

5  to 10 100, 200 1, 2, 5

1.0  to 5 200 1, 2, 5

06E1 02B01 ST1TPA 2

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.