8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 1 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
5
6
7
8
1
2
3
4
Features
• High speed 1Mbit/s
• High isolation voltage between input
and output (Viso=5000 Vrms )
• Guaranteed performance from 0°C to 70°C
• Wide operating temperature range of -55°C to 100°C
• Pb free and RoHS compliant
Description
The 6N135, 6N136 and ICPL4502 devices each consist of an
infrared emitting diodes, optically coupled to a high speed
photo detector. A separate connection for the photodiode bias
and output-transistor collector increase the speed by several
orders of magnitude over conventional phototransistor couplers
by reducing the base-collector capacitance of the input
transistor.
They are packaged in an 8-pin DIP package and
available in wide-lead spacing and SMD option.
Applications
• Line receivers
• Telecommunication equipments
• Power transistor isolation in motor drives
• Replacement for low phototransistor photo couplers
• Feedback loop in switch-mode power supplies
• Home appliances
• High speed logic ground isolation
Schematic
5
6
7
8
1
2
3
4
Pin Configuration
1. No Connection
2. Anode
3. Cathode
4. No Connection
5. Gnd
6. Vout
7. VB
8. VCC
Pin Configuration
1. No Connection
2. Anode
3. Cathode
4. No Connection
5. Gnd
6. Vout
7. No Connection
8. VCC
6N135 / 6N136 ICPL4502
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 2 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
Absolute Maximum Ratings (Ta=25°C)
Parameter Symbol Rating Unit
Forward current IF 25 mA
Peak forward current
(50% duty, 1ms P.W) IFP 50 mA
Peak transient current
(≤1μs P.W,300pps) IFtrans 1 A
Reverse voltage VR 5 V
Input
Power dissipation PIN 45 mW
Power dissipation PO 100 mW
Emitter-Base reverse
voltage
6N135
6N136 VEBR 5 V
Base current 6N135
6N136 IB 5 mA
Average Output current IO(AVG) 8 mA
Peak Output current IO(PK) 16 mA
Output voltage VO -0.5 to 20 V
Output
Supply voltage VCC -0.5 to 30 V
Isolation voltage *1 V
ISO 5000 V rms
Operating temperature TOPR -55 ~ +100 °C
Storage temperature TSTG -55 ~ +125 °C
Soldering temperature *2 T
SOL 260 °C
Notes
*1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2, 3, 4 are shorted together, and pins 5, 6, 7, 8
are shorted together.
*2 For 10 seconds.
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 3 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
Electrical Characteristics (TA=0 to 70°C unless specified otherwise)
Input
Parameter Symbol Min. Typ.* Max. Unit Conditions
Forward voltage VF - 1.45 1.8 V
IF = 16mA
Reverse Voltage VR 5.0 - - V
IR = 10μA
Temperature coefficient of
forward voltage ΔVF/ΔTA - -1.9 - mV/°C
IF =16mA
Output
Parameter Symbol Min. Typ.* Max. Unit Conditions
- 0.001 0.5 IF=0mA, VO=VCC=5.5V,
TA=25°C
- 0.01 1 IF=0mA, VO=VCC=15V,
TA=25°C
Logic High Output Current IOH
- - 50
µA
I
F=0mA, VO=VCC=15V
Logic Low Supply Current ICCL - 150 200
µA IF=16mA, VO=Open,
VCC=15V
- 0.01 1 IF=0mA, VO=Open,
VCC=15V, TA=25°C
Logic High Supply Current ICCH
- - 2
µA
IF=0mA, VO=Open,
VCC=15V
* Typical values at TA = 25°C
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 4 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
Transfer Characteristics (TA=0 to 70°C unless specified otherwise)
Parameter Symbol Min. Typ.* Max. Unit Conditions
6N135 7 - 50
6N136
ICPL4502 19 - 50
IF = 16mA ,VO = 0.4V,
VCC=4.5V, TA=25°C
6N135 5 - -
Current Transfer
Ratio
6N136
ICPL4502
CTR
15 - -
%
IF = 16mA ,VO = 0.5V,
VCC=4.5V
6N135 - 0.18 0.4
IF = 16mA ,IO = 1.1mA,
VCC=4.5V, TA=25°C
6N136
ICPL4502 - 0.18 0.4 IF = 16mA ,IO = 3mA,
VCC=4.5V, TA=25°C
6N135 - 0.5
IF = 16mA ,IO = 0.8mA,
VCC=4.5V
Logic Low
Output Voltage
6N136
ICPL4502
VOL
- 0.5
V
IF=16mA ,IO=2.4mA,
VCC=4.5V
Switching Characteristics (TA=0 to 70°C unless specified otherwise, IF=16mA, Vcc=5V)
Parameter Symbol Min. Typ.* Max. Unit Conditions
- 0.15 1.5 RL=4.1KΩ, TA=25°C
6N135
- - 2.0 RL=4.1KΩ
- 0.15 0.8 RL=1.9KΩ, TA=25°C
Propagation
Delay Time to
Logic Low 6N136
ICPL4502
TPHL
- - 1.0
µs
RL=1.9KΩ
- 0.7 1.5 RL=4.1KΩ, TA=25°C
6N135
- - 2.0 RL=4.1KΩ
- 0.4 0.8 RL=1.9KΩ, TA=25°C
Propagation
Delay Time to
Logic High 6N136
ICPL4502
TPLH
- - 1.0
µs
RL=1.9KΩ
6N135
1,000 - - IF = 0mA , VCM=10Vp-p,
RL=4.1KΩ, TA =25°C
Common Mode
Transient
Immunity at
Logic High 6N136
ICPL4502
CMH
1,000 - -
V/µs IF = 0mA , VCM=10Vp-p,
RL=1.9KΩ, TA =25°C
6N135 1,000 - -
IF = 16mA , VCM=10Vp-p,
RL=4.1KΩ, TA =25°C
Common Mode
Transient
Immunity at
Logic Low 6N136
ICPL4502
CML
1,000 - -
V/µs IF = 16mA , VCM=10Vp-p,
RL=1.9KΩ, TA=25°C
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 5 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
Typical Performance Curves
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 6 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
Order Information
Figure 8 Switching Time Test Circuit & Waveform
Figure 9 Transient Immunity Test Circuit &
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 7 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
Part Number
6N13XY
or ICPL4502Y
Note
X = Part No. (X = 5 or 6 for 6N13X)
Y = Lead form option (G SM or none)
Option Description Packing quantity
None Standard DIP-8 45 units per tube
G Wide lead bend (0.4 inch spacing) 45 units per tube
SM Surface mount lead in tubes 45 units per tube
SM T+R Surface mount lead form (low profile) + TA tape & reel option 1000 units per reel
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 8 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
Package Drawing
(Dimensions in mm)
Standard DIP Type
Option G Type
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 9 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
Option SM Type
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 10 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
Recommended pad layout for surface mount leadform
Device Marking
Notes
6N136 denotes Device Number
Y denotes 1 digit Year code
WW denotes 2 digit Week code
I denotes Isocom
6N136
IYWW
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 11 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
Tape & Reel Packing Specifications
Tape dimensions
Dimension No. A B Do D1 E F
Dimension(mm) 10.4±0.1 10.0±0.1 1.5±0.1 1.5±0.1 1.75±0.1 7.5±0.1
Dimension No. Po P1 P2 t W K
Dimension(mm) 4.0±0.1 12.0±0.1 2.0±0.1 0.4±0.1 16.0+0.3/
-0.1 4.5±0.1
Direction of feed from reel
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 12 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
TIME
(
S
)
150
1-3 °C/Sec
70
–
170 Sec
200
217
>255 °C
(
30s
1-3 °C/Sec 60
–
140 Sec
260 °C
(
p
eak
,
10
Solder Reflow Temperature Profile
8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR
PHOTOCOUPLER
Isocom Components Ltd 13 http://www.isocom.com
Document No： DC93134 Rev. 1 April 8, 2009
6N135 6N136
I
C
PL4
50
2
DISCLAIMER
1. Above specification may be changed without notice. ISOCOM will reserve authority on material change for
above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for using
outlined in these specification sheets. ISOCOM assumes no responsibility for any damage resulting from
use of the product which does not comply with the absolute maximum ratings and the instructions included
in these specification sheets.
3. These specification sheets include materials protected under copyright of ISOCOM corporation. Please
don’t reproduce or cause anyone to reproduce them without ISOCOM’s consent.
