XTH, XTK, XTL, XTM, XTV www.vishay.com Vishay Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed FEATURES * High temperature * High voltage * High capacitance * Withstands high frequency vibration to 2000 Hz * Hermetically sealed * Long shelf life * DSCC drawings 04032 and 04033 PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to + 175 C with proper derating Capacitance Range: 2 F to 2200 F Tolerance Range: - 15 % to + 50 % (standard for XTK, XTM, XTV) - 15 % to + 75 % (standard for XTH, XTL) 20 % (special order) Voltage Range: 8 VDC to 630 VDC at 85 C Reverse Voltage: None ORDERING INFORMATION XTV 126 T 630 P 0 A MODEL CAPACITANCE CODE CAPACITANCE TOLERANCE DC VOLTAGE RATING CASE CODE INSULATION TERMINAL CONFIGURATION XTH XTK XTL XTM XTV This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. T = - 15 % to + 50 % (XTK, XTM, XTV standard) U = - 15 % to + 75 % (XTH, XTL standard) M = 20 % (special order) This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. P = Polar (case negative) R = Reverse polarity (case positive) 0 = Uninsulated (standard) 4 = Teflon (+ 175 C limit) See Styles Note * For styles, terminal configurations, mounting methods and hardware, please see pages following standard ratings table DIMENSIONS in inches [millimeters] XTH-XTL-XTV XTK-XTM 2.250 0.250 D H (+) 0.281 0.062 0.281 0.062 5/16 1/16 TYPE D H XTK - XTM 0.656 0.438 to 1.781 XTL - XTH 0.875 0.540 to 4.062 XTV 1.125 0.600 to 2.810 Revision: 25-Jul-11 1 2.250 0.250 (-) (+) Case negative D H Document Number: 42077 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XTH, XTK, XTL, XTM, XTV www.vishay.com Vishay STANDARD RATINGS AND DIMENSIONS CAPACITANCE (F) MAX. WORKING VOLTAGE MAX. DCL AT MAX. VDC (A) TYP. ESR MAX. Z - 55 C MAX. % CAP. CHANGE FROM ROOM TEMP. SIZE MAX. RIPPLE 120 Hz APPROX. RMS D H WEIGHT - 55 C + 0.031 + 0.062 TO - 0.015 - 0.062 + 175 C + 125 C + 175 C () + 85 C + 125 C + 175 C () - 55 C + 85 C + 175 C (g) PART NUMBER (mA) 8 VDC AT + 85 C 70 7 5 10.0 30 45 60 60 - 60 + 30 + 30 14 137 0.656 0.438 XTK706(1)008P0A 140 7 5 5.0 50 75 100 30 - 60 + 30 + 30 15 213 0.656 0.562 XTM147(1)008P0A 50 8.5 7 10.0 25 37 50 75 - 60 + 30 + 30 14 137 0.656 0.438 XTK506(1)010P0A 100 8.5 7 5.0 45 67 90 40 - 60 + 30 + 30 15 213 0.656 0.562 XTM107(1)010P0A 580 10 8 1.5 135 197 270 + 35 48 550 1.125 0.600 XTV587(1)012P0A 10 VDC AT + 85 C 12 VDC AT + 85 C 20 - 90 + 20 850 10 8 1.5 135 197 270 20 - 90 + 20 + 35 50 550 1.125 0.600 XTV857(1)012P0A 1100 10 8 1.5 135 197 270 20 - 90 + 20 + 35 60 694 1.125 1.100 XTV118(1)012P0A 2200 10 8 1.5 135 197 270 20 - 90 + 20 + 35 82 694 1.125 1.100 XTV228(1)012P0A 18 VDC AT + 85 C 35 15 12 10.0 30 45 60 85 - 60 + 30 + 30 14 137 0.656 0.438 XTK356(1)018P0A 70 15 12 5.0 50 75 100 45 - 60 + 30 + 30 15 213 0.656 0.562 XTM706(1)018P0A 120 15 12 2.8 50 75 100 30 - 60 + 15 + 40 26 328 0.875 0.540 XTL127(1)018P0A 240 15 12 2.5 80 120 160 20 - 60 + 15 + 40 32 390 0.875 0.732 XTH247(1)018P0A 390 15 12 1.5 165 227 330 20 - 85 + 20 + 35 48 550 1.125 0.600 XTV397(1)018P0A 560 15 12 1.5 165 227 330 20 - 85 + 20 + 35 50 550 1.125 0.600 XTV567(1)018P0A 900 15 12 1.5 165 227 330 20 - 85 + 20 + 35 68 694 1.125 1.100 XTV907(1)018P0A 1800 15 12 1.5 165 227 330 20 - 85 + 20 + 35 82 694 1.125 1.100 XTV188(1)018P0A 28 17.5 13 10.0 30 45 60 85 - 60 + 30 + 30 14 137 0.656 0.438 XTK286(1)020P0A 56 17.5 13 5.0 50 75 100 45 - 60 + 30 + 30 15 213 0.656 0.562 XTM566(1)020P0A 20 VDC AT + 85 C 100 17.5 13 2.8 50 75 100 30 - 60 + 15 + 40 26 328 0.875 0.540 XTL107(1)020P0A 200 17.5 13 2.5 80 120 160 20 - 60 + 15 + 40 32 390 0.875 0.732 XTH207(1)020P0A 20 25 20 10.0 35 52 70 125 - 40 + 20 + 20 14 137 0.656 0.438 XTK206(1)030P0A 40 25 20 5.0 60 90 120 75 - 40 + 20 + 20 15 213 0.656 0.562 XTM406(1)030P0A 75 25 20 2.7 55 82 110 45 - 45 + 15 + 30 26 333 0.875 0.540 XTL756(1)030P0A 30 VDC AT + 85 C 150 25 20 2.7 90 135 180 30 - 45 + 15 + 30 32 375 0.875 0.732 XTH157(1)030P0A 250 25 20 2.5 195 287 390 20 - 65 + 20 + 35 48 427 1.125 0.600 XTV257(1)030P0A 370 25 20 1.5 125 170 215 15 - 65 + 20 + 35 50 550 1.125 0.600 XTV377(1)030P0A 650 25 20 1.5 145 202 250 15 - 85 + 20 + 35 68 694 1.125 1.100 XTV657(1)030P0A 1300 25 20 1.5 190 282 375 10 - 85 + 20 + 35 82 694 1.125 1.100 XTV138(1)030P0A 35 VDC AT + 85 C 20 30 23 10.0 35 52 72 125 - 40 + 20 + 20 14 137 0.656 0.438 XTK206(1)035P0A 40 30 23 5.0 60 90 120 75 - 40 + 20 + 20 15 213 0.656 0.562 XTM406(1)035P0A 60 30 23 2.7 55 82 110 45 - 45 + 10 + 30 26 333 0.875 0.540 XTL606(1)035P0A Note * Part number definitions: (1) Tolerance code: T = - 15 % to + 50 % (standard for XTK, XTM, XTV) U = -15 % to + 75 % (standard for XTH, XTL) M = 20 % (available by special order) Revision: 25-Jul-11 2 Document Number: 42077 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XTH, XTK, XTL, XTM, XTV www.vishay.com Vishay STANDARD RATINGS AND DIMENSIONS CAPACITANCE (F) MAX. WORKING VOLTAGE MAX. DCL AT MAX. VDC (A) TYP. ESR MAX. Z - 55 C MAX. % CAP. CHANGE FROM ROOM TEMP. SIZE MAX. RIPPLE 120 Hz APPROX. RMS D H WEIGHT - 55 C + 0.031 + 0.062 TO - 0.015 - 0.062 + 175 C + 125 C + 175 C () + 85 C + 125 C + 175 C () - 55 C + 85 C + 175 C (g) (mA) PART NUMBER 40 VDC AT + 85 C 190 34 27 2.5 195 297 400 20 - 55 + 20 + 35 48 427 1.125 0.600 XTV197(1)040P0A 290 34 27 2.5 200 300 400 20 - 55 + 20 + 35 50 427 1.125 0.600 XTV297(1)040P0A 500 34 27 1.5 200 300 400 20 - 75 + 20 + 35 68 694 1.125 1.100 XTV507(1)040P0A 1000 34 27 1.5 195 297 400 20 - 75 + 20 + 35 82 694 1.125 1.100 XTV108(1)040P0A + 35 82 694 1.125 1.100 XTV907(1)050P0A 50 VDC AT + 85 C 900 44 32 1.5 195 297 400 25 - 85 + 20 60 VDC AT + 85 C 12 50 40 10.0 35 52 70 180 - 30 + 20 + 20 14 137 0.656 0.438 XTK126(1)060P0A 25 50 40 5.0 60 90 120 90 - 30 + 20 + 20 15 213 0.656 0.562 XTM256(1)060P0A 40 50 40 2.7 60 90 120 65 - 35 + 10 + 20 26 333 0.875 0.540 XTL406(1)060P0A 70 50 40 2.7 90 135 180 40 - 35 + 10 + 20 32 375 0.875 0.732 XTH706(1)060P0A 80 50 40 2.7 95 142 190 35 - 35 + 10 + 20 32 375 0.875 0.732 XTH806(1)060P0A 130 50 40 2.5 210 315 420 30 - 50 + 20 + 35 48 427 1.125 0.600 XTV137(1)060P0A 200 50 40 1.5 135 182 230 30 - 50 + 20 + 35 50 550 1.125 0.600 XTV207(1)060P0A 350 50 40 1.5 155 210 265 25 - 70 + 20 + 35 68 694 1.125 1.100 XTV357(1)060P0A 700 50 40 1.5 200 275 350 15 - 70 + 20 + 35 82 694 1.125 1.100 XTV707(1)060P0A 750 50 40 1.5 200 275 350 29 - 70 + 20 + 35 82 694 1.125 1.100 XTV757(1)060P0A 8.0 80 60 10.0 35 52 70 250 - 30 + 20 + 20 14 137 0.656 0.438 XTK805(1)090P0A 16 80 60 5.0 60 90 120 125 - 30 + 20 + 20 15 213 0.656 0.562 XTM166(1)090P0A 25 80 60 2.7 55 82 110 90 - 35 + 10 + 20 26 333 0.875 0.540 XTL256(1)090P0A 90 VDC AT + 85 C 50 80 60 2.7 90 135 180 45 - 35 + 10 + 20 32 375 0.875 0.732 XTH506(1)090P0A 84 80 60 2.5 195 287 390 40 - 40 + 20 + 35 48 427 1.125 0.600 XTV846(1)090P0A 120 80 60 1.5 135 182 230 40 - 40 + 20 + 35 50 550 1.125 0.600 XTV127(1)090P0A 220 80 60 1.5 145 202 250 30 - 60 + 20 + 35 68 694 1.125 1.100 XTV227(1)090P0A 450 80 60 1.5 195 215 235 25 - 60 + 20 + 35 82 694 1.125 1.100 XTV457(1)090P0A 180 VDC AT + 85 C 2.0 160 120 20.0 75 112 150 850 - 30 + 20 + 20 21 108 0.656 0.719 XTK205(1)180P0A 4.0 160 120 20.0 35 52 70 500 - 30 + 20 + 20 21 117 0.656 0.719 XTK405(1)180P0A 8.0 160 120 10.0 60 90 120 250 - 30 + 20 + 20 23 186 0.656 0.938 XTM805(1)180P0A 12 160 120 5.6 55 82 110 180 - 35 + 10 + 20 44 282 0.875 0.920 XTL126(1)180P0A 25 160 120 5.3 90 135 180 90 - 35 + 10 + 20 56 341 0.875 1.300 XTH256(1)180P0A 42 160 120 5.0 120 162 205 75 - 40 + 20 + 35 74 363 1.125 0.976 XTV426(1)180P0A 60 160 120 3.0 135 182 230 60 - 40 + 20 + 35 78 363 1.125 0.976 XTV606(1)180P0A 110 160 120 3.0 145 202 250 60 - 60 + 20 + 35 114 631 1.125 1.938 XTV117(1)180P0A 230 160 120 3.0 200 275 350 50 - 60 + 20 + 35 142 631 1.125 1.938 XTV237(1)180P0A Note * Part number definitions: (1) Tolerance code: T = - 15 % to + 50 % (standard for XTK, XTM, XTV) U = -15 % to + 75 % (standard for XTH, XTL) M = 20 % (available by special order) Revision: 25-Jul-11 3 Document Number: 42077 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XTH, XTK, XTL, XTM, XTV www.vishay.com Vishay STANDARD RATINGS AND DIMENSIONS CAPACITANCE (F) MAX. WORKING VOLTAGE MAX. DCL AT MAX. VDC (A) TYP. ESR MAX. Z - 55 C MAX. % CAP. CHANGE FROM ROOM TEMP. SIZE MAX. RIPPLE 120 Hz APPROX. RMS D H WEIGHT - 55 C + 0.031 + 0.062 TO - 0.015 - 0.062 + 175 C + 125 C + 175 C () + 85 C + 125 C + 175 C () - 55 C + 85 C + 175 C (g) PART NUMBER (mA) 270 VDC AT + 85 C 2.5 240 180 30.0 35 52 70 750 - 30 + 20 + 20 28 112 0.656 1.031 XTK255(1)270P0A 5.0 240 180 15.0 55 82 110 375 - 30 + 20 + 20 31 179 0.656 1.375 XTM505(1)270P0A 8.0 240 180 8.3 55 82 110 270 - 35 + 10 + 20 62 266 0.875 1.270 XTL805(1)270P0A 16 240 180 8.3 90 135 180 135 - 35 + 10 + 20 81 320 0.875 1.865 XTH166(1)270P0A 28 240 180 7.5 120 162 205 80 - 40 + 20 + 35 100 339 1.125 1.350 XTV286(1)270P0A 40 240 180 7.5 135 182 230 100 - 40 + 20 + 35 104 339 1.125 1.350 XTV406(1)270P0A 75 240 180 4.5 145 202 250 90 - 60 + 20 + 35 160 608 1.125 2.812 XTV756(1)270P0A 150 240 180 4.5 195 215 235 75 - 60 + 20 + 35 202 608 1.125 2.812 XTV157(1)270P0A 2.0 320 240 40.0 35 52 70 1000 - 30 + 20 + 20 37 108 0.656 1.312 XTK205(1)360P0A 4.0 320 240 20.0 60 90 120 500 - 30 + 20 + 20 41 175 0.656 1.781 XTM405(1)360P0A 6.0 320 240 11.0 55 82 110 360 - 35 + 10 + 20 80 258 0.875 1.635 XTL605(1)360P0A 12 320 240 11.0 90 135 180 180 - 35 + 10 + 20 105 314 0.875 2.420 XTH126(1)360P0A 22 320 240 10.0 125 170 215 100 - 40 + 20 + 35 126 323 1.125 1.705 XTV226(1)360P0A 30 320 240 10.0 135 182 230 120 - 40 + 20 + 35 133 323 1.125 1.705 XTV306(1)360P0A 360 VDC AT + 85 C 450 VDC AT + 85 C 5.0 400 300 13.0 55 82 110 450 - 35 + 10 + 20 98 262 0.875 2.000 XTL505(1)450P0A 10 400 300 17 400 300 13.0 90 135 180 225 - 35 + 10 + 20 130 318 0.875 2.980 XTH106(1)450P0A 12.5 125 170 215 130 - 40 + 20 + 35 152 315 25 400 300 1.125 2.080 XTV176(1)450P0A 12.5 135 182 230 150 - 40 + 20 + 35 164 315 1.125 2.080 XTV256(1)450P0A 540 VDC AT + 85 C 4.0 480 360 16.6 55 82 110 540 - 35 + 10 + 20 114 250 0.875 2.365 XTL405(1)540P0A 8.0 480 360 16.6 90 135 180 270 - 35 + 10 + 20 154 306 0.875 3.532 XTH805(1)540P0A 14 480 300 15.0 120 162 205 160 - 40 + 20 + 35 178 309 1.125 2.435 XTV146(1)540P0A 20 480 300 15.0 135 182 230 170 - 40 + 20 + 35 196 309 1.125 2.435 XTV206(1)540P0A 3.5 560 420 18.9 55 82 110 630 - 35 + 10 + 20 133 249 0.875 2.720 XTL355(1)630P0A 7.0 560 420 18.9 90 135 180 315 - 35 + 10 + 20 179 308 0.875 4.062 XTH705(1)630P0A 630 VDC AT + 85 C 12 560 420 17.5 120 162 205 180 - 40 + 20 + 35 204 306 1.125 2.810 XTV126T630P0A 18 560 420 17.5 135 182 230 200 - 40 + 20 + 35 225 306 1.125 2.810 XTV186(1)630P0A Note * Part number definitions: (1) Tolerance code: T = - 15 % to + 50 % (standard for XTK, XTM, XTV) U = -15 % to + 75 % (standard for XTH, XTL) M = 20 % (available by special order) Revision: 25-Jul-11 4 Document Number: 42077 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XTH, XTK, XTL, XTM, XTV www.vishay.com Vishay XTH-L-V STYLES STYLE A STYLE B STYLE C H 0.3125 0.0625 (+) (+) 0.025 (+) 0.005 0.3125 0.0625 0.3125 0.0625 Top Bottom 0.375 0.0625 0.4375 DIA. Top STYLE D STYLE E Top 0.183 0.010 0.5625 0.0625 0.385 MAX. 0.075 MAX. 0.065 MAX. (+) (+) (+) 8-32UNC-2A thread Top Bottom Negative screw lug is for indexing and negative connection only STYLE G 0.3125 0.0625 1/4-20UNC-3A thread 0.500 0.0625 DIA. Top Bottom See Detail C in Mounting Methods table for suggested mounting methods STYLE H 0.047 0.025 (+) 0.005 8-32UNC-2A thread Top Bottom Negative screw lug is for index and negative connection only 0.183 0.010 STYLE K 0.500 0.0625 DIA. Top Bottom See Detail C in Mounting Methods table for suggested mounting methods 0.183 0.010 0.385 MAX. 0.075 MAX. 0.025 (+) 0.005 STYLE L Wire hole 0.094 0.010 0.4063 0.0625 0.500 DIA. MAX. Top 0.183 0.010 8-32UNC-2A thread Bottom See Detail D in Mounting Methods table for suggested mounting methods STYLE M 1/2-20UNF-2A THREAD 0.025 (+) 0.015 (+) 0.030 0.020 XTH-XTL 0.060 0.020 XTV 0.375 0.015 0.590 0.015 Top (+) 0.030 0.020 XTH-XTL 0.060 0.020 XTV 0.3125 0.0625 0.060 MAX. 0.125 MAX. Top 0.500 0.010 0.500 0.010 Bottom + 0.007 - 0.005 See Details B and E in Mounting Methods table for suggested mounting methods Revision: 25-Jul-11 Bottom See Detail D in Mounting Methods table for suggested mounting method 0.3125 0.0625 Wire hole 1/4-20UNC-3A 0.094 0.010 thread 0.4063 0.0625 1/2-20UNF-2A THREAD 0.375 0.015 0.500 DIA. MAX. Top 8-32UNC-2A thread STYLE J 0.025 (+) 0.005 Wire hole 0.094 0.010 0.4063 0.0625 0.3125 0.0625 0.3125 0.5625 0.0625 0.0625 0.075 MAX. 0.500 0.0625 0.3125 0.0625 Bottom STYLE F 0.500 0.0625 0.047 0.375 Bottom 0.250 NOM. D 0.3125 0.0625 Wire hole 0.094 0.010 0.4063 0.0625 0.375 Bottom Top Bottom + 0.007 - 0.005 See Detail B and E in Mounting Methods table for suggested mounting methods 5 * Extends 0.125 on 0.875 DIA. units only Document Number: 42077 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XTH, XTK, XTL, XTM, XTV www.vishay.com Vishay XTK-M STYLES STYLE A POS STYLE B NEG STYLE E POS STYLE C POS POS NEG STYLE F NEG POS STYLE G POS NEG STYLE D NEG NEG STYLE H NEG POS POS NEG POSITIVE TERMINALS FOR XTK AND XTM STYLE A STYLE B, C AND D STYLE E, G AND H STYLE F 0.125 0.432 0.05 0.500 0.062 2.250 0.025 0.432 0.05 0.062 0.812 0.062 0.555 0.015 0.125 0.285 MAX. 0.100 MAX. 3/8-24 UNF 2A thread 3/8-24 UNF 2A thread 0.035 DIA. 0.281 0.062 0.285 MAX. 0.812 0.062 0.555 0.015 0.750 0.020 H 0.062 0.020 0.015 Terminal detail enlarged H 0.062 0.020 0.015 H 0.062 NEGATIVE TERMINALS FOR XTK AND XTM STYLE A 0.281 0.062 STYLE B, E AND F 2.250 0.025 STYLE C AND G 0.078 DIA. hole Case negative Revision: 25-Jul-11 0.375 0.062 6-32NC 2A thread 0.375 0.062 0.187 0.035 DIA. 0.656 0.025 STYLE D AND H 0.656 0.025 0.656 0.025 6 0.656 0.025 Document Number: 42077 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XTH, XTK, XTL, XTM, XTV www.vishay.com Vishay XTH, XTL AND XTV MOUNTING METHODS DETAIL A DETAIL B 0.511 0.505 0.093 0.031 0.090 0.094 DIA. 0.004 0.535 0.010 0.020 0.007 Turret terminal detail dimensions (positive lead connections) 0.390 0.385 Configuration L only 0.065 0.006 For configurations A, B, C, D, E, F, G, H, J and M Nut nearly flush with ends of threads For configurations K and L DETAIL C DETAIL D Panel 0.625 DIA. counter bore x 0.100.090 deep (for head of weld screw) Tapped 1/4-20UNC-2B hole or internal tooth lockwasher and hex nut Panel Use 8-32 x 0.246 long helical for non-ferrous metal panel Not recommended for non-metal panels 0.375 MIN. For configurations E and H For configurations F and J DETAIL E 0.511 0.505 Secure to 100 in, lbs. torque 1" DIA. counterbore 1.250" DIA. counterbore for XTV units Configuration L only Panel must be rigidly fixed 0.090 0.390 0.385 Configuration L only 0.375 MIN. recommended thickness May use rectangular hole of similar dimensions For configurations K and L Note * Standard mounting nut provided is plated steel. Stainless steel nut can be obtained by adding "/STN" suffix to part number. 04022 RATINGS AND CASE CODES ESR MAX. CAPACITANCE RIPPLE DIMENSION DSCC CAP. CAP. DC LEAKAGE MAX. IMPEDANCE 120 Hz CHANGE CURRENT L FIGURE DRAWING (NOM.) TOLERANCE (A) MAX. 25 C (%) 1/ 0.062 (1.57) 04022 PIN (F) (%) + 25 C + 85 C + 125 C () () - 55 C + 85 C + 125 C (mA) (INCHES) 8 VDC AT + 85 C RATED; 9.2 VDC AT + 85 C SURGE 01 70 + 50, - 15 6 30 48 12 60 - 60 + 30 + 30 137 0.438 (11.13) 1A 02 140 + 50, - 15 10 50 80 5.9 30 - 60 + 30 + 30 213 0.562 (14.27) 1A 03 50 + 50, - 15 5 04 100 + 50, - 15 9 10 VDC AT + 85 C RATED; 11.5 VDC AT + 85 C SURGE 25 40 11.7 75 - 60 + 30 + 30 137 0.438 (11.13) 1A 45 72 5.9 40 - 60 + 30 + 30 213 0.562 (14.27) 1A 20 VDC AT + 85 C RATED; 23 VDC AT + 85 C SURGE 05 28 + 50, - 15 6 30 48 12 85 - 40 + 20 + 20 137 0.438 (11.13) 1A 06 56 + 50, - 15 10 50 80 6 45 - 40 + 20 + 20 213 0.562 (14.27) 1A 07 20 + 50, - 15 7 35 56 11.7 125 - 40 + 20 + 20 137 0.438 (11.13) 1A 08 40 + 50, - 15 12 60 96 5.9 75 - 40 + 20 + 20 213 0.562 (14.27) 1A 30 VDC AT + 85 C RATED; 34.5 VDC AT + 85 C SURGE Revision: 25-Jul-11 7 Document Number: 42077 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XTH, XTK, XTL, XTM, XTV www.vishay.com Vishay 04022 RATINGS AND CASE CODES ESR MAX. CAPACITANCE RIPPLE DIMENSION DSCC CAP. CAP. DC LEAKAGE MAX. IMPEDANCE 120 Hz CHANGE CURRENT L FIGURE DRAWING (NOM.) TOLERANCE (A) MAX. 25 C (%) 1/ 0.062 (1.57) 04022 PIN (F) (%) + 25 C + 85 C + 125 C () () - 55 C + 85 C + 125 C (mA) (INCHES) 60 VDC AT + 85 C RATED; 69 VDC AT + 85 C SURGE 09 12 + 50, - 15 7 35 56 12 180 - 30 + 20 + 20 137 0.438 (11.13) 1A 10 25 + 50, - 15 12 60 96 6 90 - 30 + 20 + 20 213 0.562 (14.27) 1A 11 8.0 + 50, - 15 7 35 56 12 250 - 30 + 20 + 20 137 0.438 (11.13) 1A 12 16 + 50, - 15 12 60 96 5.9 125 - 30 + 20 + 20 213 0.562 (14.27) 1A 90 VDC AT + 85 C RATED; 103 VDC AT + 85 C SURGE 180 VDC AT + 85 C RATED; 207 VDC AT + 85 C SURGE 13 4.0 + 50, - 15 7 35 56 24 500 - 30 + 20 + 20 117 0.719 (18.26) 1A 14 8.0 + 50, - 15 12 60 96 12 250 - 30 + 20 + 20 186 0.938 (23.83) 1A 270 VDC AT + 85 C RATED; 310 VDC AT + 85 C SURGE 15 2.5 + 50, - 15 7 16 5.0 + 50, - 15 11 35 56 36 750 - 30 + 20 + 20 112 1.031 (26.19) 1A 55 88 18 375 - 30 + 20 + 20 179 1.375 (34.93) 1A 360 VDC AT + 85 C RATED; 414 VDC AT + 85 C SURGE 17 2.0 + 50, - 15 7 18 4.0 + 50, - 15 12 35 56 48 1000 - 30 + 20 + 20 108 1.312 (33.32) 1A 60 96 24 500 - 30 + 20 + 20 175 1.781 (45.24) 1A 20 VDC AT + 85 C RATED; 23 VDC AT + 85 C SURGE 19 100 + 50, - 15 10 50 80 3.3 30 - 60 + 15 + 20 333 0.540 (13.72) 1B 20 200 + 75, - 15 16 80 128 2.8 20 - 60 + 15 + 20 375 0.732 (18.59) 1B 21 75 + 75, - 15 11 55 88 3.1 45 - 45 + 10 + 10 333 0.540 (13.72) 1B 22 150 + 75, - 15 13 90 104 3 30 - 45 + 10 + 10 375 0.732 (18.59) 1B 30 VDC AT + 85 C RATED; 34.5 VDC AT + 85 C SURGE 60 VDC AT + 85 C RATED; 69 VDC AT + 85 C SURGE 23 40 + 75, - 15 12 60 96 3.2 65 - 35 + 10 + 10 333 0.540 (13.72) 1B 24 80 + 75, - 15 19 95 152 3.1 35 - 35 + 10 + 10 375 0.732 (18.59) 1B 90 VDC AT + 85 C RATED; 103 VDC AT + 85 C SURGE 25 25 + 75, - 15 11 55 88 3.2 90 - 35 + 10 + 10 333 0.540 (13.72) 1B 26 50 + 75, - 15 18 90 144 3.1 45 - 35 + 10 + 10 375 0.732 (18.59) 1B 180 VDC AT + 85 C RATED; 207 VDC AT + 85 C SURGE 27 12 + 75, - 15 11 28 25 + 75, - 15 18 55 88 6.6 180 - 35 + 10 + 10 282 0.920 (23.37) 1B 90 144 6.2 90 - 35 + 10 + 10 341 1.300 (33.02) 1B 270 VDC AT + 85 C RATED; 310 VDC AT + 85 C SURGE 29 8.0 + 75, - 15 11 55 88 9.9 270 - 35 + 10 + 10 266 1.270 (32.36) 1B 30 16 + 75, - 15 18 90 144 9.8 135 - 35 + 10 + 10 320 1.865 (47.37) 1B 31 6.0 + 75, - 15 11 55 88 13 360 - 35 + 10 + 10 258 1.635 (41.53) 1B 32 12 + 75, - 15 18 90 144 13 180 - 35 + 10 + 10 314 2.420 (61.47) 1B 33 5.0 + 75, - 15 11 55 88 15 450 - 35 + 10 + 10 252 2.000 (50.80) 1B 34 10 + 75, - 15 18 90 144 15 225 - 35 + 10 + 10 308 2.980 (75.69) 1B 360 VDC AT + 85 C RATED; 414 VDC AT + 85 C SURGE 450 VDC AT + 85 C RATED; 518 VDC AT + 85 C SURGE 540 VDC AT + 85 C RATED; 621 VDC AT + 85 C SURGE 35 4.0 + 75, - 15 11 55 88 20 540 - 35 + 10 + 10 250 2.365 (60.07) 1B 36 8.0 + 75, - 15 18 90 144 20 270 - 35 + 10 + 10 308 3.532 (89.71) 1B + 10 250 2.720 (69.09) 1B 630 VDC AT + 85 C RATED; 724 VDC AT + 85 C SURGE 37 3.5 Revision: 25-Jul-11 + 75, - 15 11 55 88 22 630 - 35 + 10 8 Document Number: 42077 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XTH, XTK, XTL, XTM, XTV www.vishay.com Vishay 04022 RATINGS AND CASE CODES ESR MAX. CAPACITANCE RIPPLE DIMENSION DSCC CAP. CAP. DC LEAKAGE MAX. IMPEDANCE 120 Hz CHANGE CURRENT L FIGURE DRAWING (NOM.) TOLERANCE (A) MAX. 25 C (%) 1/ 0.062 (1.57) 04022 PIN (F) (%) + 25 C + 85 C + 125 C () () - 55 C + 85 C + 125 C (mA) (INCHES) 30 VDC AT + 85 C RATED; 34.5 VDC AT + 85 C SURGE 39 370 20 18 125 180 1.7 15 - 65 + 20 + 25 550 0.600 (15.24) 1C 40 370 + 50, - 15 18 125 180 1.7 15 - 65 + 20 + 25 550 0.600 (15.24) 1C 41 650 20 21 145 210 1.8 15 - 85 + 20 + 25 694 1.100 (27.94) 1C 42 650 + 50, - 15 21 145 210 1.8 15 - 85 + 20 + 25 694 1.100 (27.94) 1C 43 1300 20 27 190 270 1.8 10 - 85 + 20 + 25 694 1.100 (27.94) 1C 44 1300 + 50, - 15 27 190 270 1.8 10 - 85 + 20 + 25 694 1.100 (27.94) 1C 60 VDC AT + 85 C RATED; 69 VDC AT + 85 C SURGE 45 200 20 19 135 190 1.8 30 - 50 + 20 + 25 550 0.600 (15.24) 1C 46 200 + 50, - 15 19 135 190 1.8 30 - 50 + 20 + 25 550 0.600 (15.24) 1C 47 350 20 22 155 220 1.8 25 - 70 + 20 + 25 694 1.100 (27.94) 1C 48 350 + 50, - 15 22 155 220 1.8 25 - 70 + 20 + 25 694 1.100 (27.94) 1C 49 700 20 29 200 290 1.8 15 - 70 + 20 + 25 694 1.100 (27.94) 1C 50 700 + 50, - 15 29 200 290 1.8 15 - 70 + 20 + 25 694 1.100 (27.94) 1C 90 VDC AT + 85 C RATED; 103 VDC AT + 85 C SURGE 51 120 20 19 135 190 1.7 40 - 40 + 20 + 25 550 0.600 (15.24) 1C 52 120 + 50, - 15 19 135 190 1.7 40 - 40 + 20 + 25 550 0.600 (15.24) 1C 53 220 20 21 145 210 1.8 30 - 60 + 20 + 25 694 1.100 (27.94) 1C 54 220 + 50, - 15 21 145 210 1.8 30 - 60 + 20 + 25 694 1.100 (27.94) 1C 55 450 20 29 195 290 1.7 35 - 60 + 20 + 25 694 1.100 (27.94) 1C 56 450 + 50, - 15 29 195 290 1.7 35 - 60 + 20 + 25 694 1.100 (27.94) 1C 180 VDC AT + 85 C RATED; 207 VDC AT + 85 C SURGE 57 42 20 17 120 170 6 75 - 40 + 20 + 25 363 0.976 (24.79) 1C 58 42 + 50, - 15 17 120 170 6 75 - 40 + 20 + 25 363 0.976 (24.79) 1C 59 60 20 19 135 190 3.4 60 - 40 + 20 + 25 363 0.976 (24.79) 1C 60 60 + 50, - 15 19 135 190 3.4 60 - 40 + 20 + 25 363 0.976 (24.79) 1C 61 110 20 21 145 210 3.5 60 - 60 + 20 + 25 631 1.938 (49.23) 1C 62 110 + 50, - 15 21 145 210 3.5 60 - 60 + 20 + 25 631 1.938 (49.23) 1C 63 230 20 29 200 290 3.5 50 - 60 + 20 + 25 631 1.938 (49.23) 1C 64 230 + 50, - 15 29 200 290 3.5 50 - 60 + 20 + 25 631 1.938 (49.23) 1C 270 VDC AT + 85 C RATED; 310 VDC AT + 85 C SURGE 65 28 20 19 120 190 9 80 - 40 + 20 + 25 339 1.350 (34.29) 1C 66 28 + 50, - 15 19 120 190 9 80 - 40 + 20 + 25 339 1.350 (34.29) 1C 67 40 20 19 135 190 8.8 100 - 40 + 20 + 25 339 1.350 (34.29) 1C 68 40 + 50, - 15 19 135 190 8.8 100 - 40 + 20 + 25 339 1.350 (34.29) 1C 69 75 20 21 145 210 5.2 90 - 60 + 20 + 25 608 2.812 (71.42) 1C 70 75 + 50, - 15 21 145 210 5.2 90 - 60 + 20 + 25 608 2.812 (71.42) 1C 71 150 20 28 195 280 5.4 75 - 60 + 20 + 25 608 2.812 (71.42) 1C 72 150 + 50, - 15 28 195 280 5.4 75 - 60 + 20 + 25 608 2.812 (71.42) 1C 360 VDC AT + 85 C RATED; 414 VDC AT + 85 C SURGE 73 22 20 18 125 180 11.4 100 - 40 + 20 + 25 323 1.705 (43.31) 1C 74 22 + 50, - 15 18 125 180 11.6 100 - 40 + 20 + 25 323 1.705 (43.31) 1C 75 30 20 19 135 190 11.7 120 - 40 + 20 + 25 323 1.705 (43.31) 1C 76 30 + 50, - 15 19 135 190 11.7 120 - 40 + 20 + 25 323 1.705 (43.31) 1C 450 VDC AT + 85 C RATED; 518 VDC AT + 85 C SURGE 77 17 20 18 125 180 15 130 - 40 + 20 + 25 315 2.080 (52.83) 1C 78 17 + 50, - 15 18 125 180 15 130 - 40 + 20 + 25 315 2.080 (52.83) 1C 79 25 20 19 135 190 15 150 - 40 + 20 + 25 315 2.080 (52.83) 1C 80 25 + 50, - 15 19 135 190 15 150 - 40 + 20 + 25 315 2.080 (52.83) 1C 540 VDC AT + 85 C RATED; 621 VDC AT + 85 C SURGE 81 14 20 17 120 170 18 160 - 40 + 20 + 25 309 2.435 (61.85) 1C 82 14 + 50, - 15 17 120 170 18 160 - 40 + 20 + 25 309 2.435 (61.85) 1C 83 20 20 19 135 190 18 170 - 40 + 20 + 25 309 2.435 (61.85) 1C 84 20 + 50, - 15 19 135 190 18 170 - 40 + 20 + 25 309 2.435 (61.85) 1C 630 VDC AT + 85 C RATED; 724 VDC AT + 85 C SURGE 85 12 20 17 120 170 16 180 - 40 + 20 + 25 306 2.810 (71.37) 1C 86 12 + 50, - 15 17 120 170 16 180 - 40 + 20 + 25 306 2.810 (71.37) 1C 87 18 20 19 135 190 16 200 - 40 + 20 + 25 306 2.810 (71.37) 1C 88 18 + 50, - 15 19 135 190 16 200 - 40 + 20 + 25 306 2.810 (71.37) 1C Revision: 25-Jul-11 9 Document Number: 42077 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XTH, XTK, XTL, XTM, XTV www.vishay.com Vishay FIGURES FIGURE 1A Weld 0.656 0.025 2.250 0.250 2.250 0.250 + 0.035 0.005 CASE CIRCUIT DIAGRAM + + 0.281 0.062 L See 04022 Ratings table 0.281 0.062 - + FIGURE 1B See Detail A 0.313 0.062 0.094 0.031 CASE NEG 0.875 DIA. + 0.031 - 0.015 0.094 DIA. 0.004 0.535 DIA. 0.010 L See 04022 Ratings table 0.406 0.062 Solder fillet permissible 0.025 0.005 0.193 MAX. DETAIL A SOLDER LUG TERMINAL FIGURE 1C 0.312 0.094 0.031 0.094 DIA. 0.004 L See 04022 Ratings table Revision: 25-Jul-11 0.094 DIA. hole 0.010 0.183 0.010 CASE NEG 1.125 DIA. + 0.031 - 0.016 Solder fillet permissible See Detail A 0.406 0.025 0.005 0.535 DIA. 0.010 10 Document Number: 42077 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000