HARTING Ha-VIS eCon Switches Ha-VIS eCon 2000 Fast Ethernet Basic PoE / PoE+ 5 to 8 Ethernet ports RJ45, SC and PoE / PoE+ Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control cabinets Commercial Temp.: 0 C ... +55 C / Industrial Temp.: -40 C ... +70 C Energy Efficient Ethernet Energy supply of up to 4 terminal devices via PoE+ (137 watts) according to IEEE 802.3at Fast Ethernet Non-Blocking Switch architecture according to IEEE 802.3 Variants with industrial temperature range of -40C ... +70 C Surge protection and reverse polarity protection Minimum energy consumption due to Energy-Efficient Ethernet Target markets Machinery & Robotics Automation technology Industrial network infrastructures Wind Energy Solar Energy Transportation Shipbuilding General description The Ha-VIS eCon 2000 Fast Ethernet PoE family of unmanaged Ethernet switches is equipped with up to 8 Fast Ethernet ports and allow for costefficient and quick expansion and/or reconstruction of network infrastructures. The switches work as power sourcing equipment (PSE) and are capable of simultaneously providing the full PoE output of 34.2 watts on up to four ports. Owing to the extremely flat design, these switches can be accommodated in installations where space is restricted towards the cable connection at the front. The selection includes various combinations of variants with RJ45 and fibre optic ports. Automatic detection of the transmission rate (auto-negotiation) and of the wiring of the twisted pair data cable (autopolarity and auto-MDI(X)) allow for simple plug & play. All variants are available with the temperature ranges "Industrial" and "Commercial". Technical characteristics Switch Features Ethernet Ports 10BASE-Te / 100BASE-TX EEE Enclosures width 120 mm Number of ports 5, 7, 8 Connection type Auto-negotiation RJ45 Yes Yes Switching technology Store and Forward Auto-polarity Supported standards IEEE 802.3 Auto-MDI(X) Frame Size 1552 bytes MAC table size Transfer conditions 1k entries Transfer speed Transfer length Packet buffer size 448 kbit Non-blocking Yes Quality of service Yes Energy-Efficient Ethernet Yes PROFINET compatible Yes EthernetIP compatible Yes Voltage supply Nominal voltage 48 VDC 54 VDC Permissible voltage range 44 VDC ... 57 VDC 50 VDC ... 57 VDC Surge protection Yes Reverse polarity proof Yes Starting current 6.40 A 7.20 A Overcurrent protection at input Yes (4 A) Max. power consumption without PoE 1.2 W ... 3.36 W Cross-section / Wire gauge 0.08 mm ... 2.5 mm (28 AWG ... 12 AWG) Connection type 3-pole, pluggable screwed contact Pinout +/-/ Supply circuit (acc. to 60950) SELV (circuit breaker 10 A) HARTING Technology Group P.O.Box 1473, D-32325 Espelkamp Wilhelm-Harting-Strae 1, D-32325 Espelkamp, Germany ICPN-Service@harting.com | Service hotline: +49 5772 47-9479 Fax: +49 5772 47-495 | www.HARTING.com/de/ethernet-switches Yes Twisted Pair 10 / 100 Mbit/s 100 m (twisted pair, Cat 5) Ethernet Ports 100BASE-FX Type of fibre Multimode (MM) Singlemode (SM) Connection type SC Duplex Transfer conditions Wavelength Transfer speed Transfer length FO 1310 nm 100 Mbit/s Output power Input sensitivity 2 km 15 km -19 dBm ... -14 dBm -15 dBm ... -8 dBm -32 dBm -34 dBm Ambient conditions Commercial temperature range Industrial temperature range Storage temperature range Relative humidity (operation) Relative humidity (storage and transport) Air pressure (operation) 0 C ... +55 C -40 C ... +70 C -40 C ... +85 C 0 % ... 95 % (not-condensing) 0 % ... 95 % (not-condensing) 2000 m (795 hPa) Note: We reserve the right to make technical changes to the products and to the content of this document at any time without prior notification. The HARTING Technologiegruppe does not accept any responsibility for possible errors or incompletions in this document. We reserve all the rights to this document and the topics and illustrations contained within it. Copying, disclosure to third parties or use of its content - even partially - is forbidden without the prior written consent of the HARTING Technologiegruppe. PoE PoE Number of PoE ports PoE+ 4 Standard IEEE 802.3af / IEEE 802.3at PoE type PSE Supported mode Supply voltage PSE Max. current consumption PSE Max. current Alternative A Supported cabling 48 VDC 54 VDC 1380 mA 2380 mA 375 mA 638 mA 15.4 W per port 34.2 W per port 61.6 W total 136.8 W total See 802.3at, section 33.1.4 PoE pinout Alternative A, MDI-X (1/2 = V-, 3/6 = V+) Maximum output power PSE Status and diagnostic displays Power (Pwr") lights up green Link/Activity (L/A") off Link/Activity (L/A") lights up green Link/Activity (L/A") flashes green Link speed (Spd") off Link speed (Spd") lights up yellow PoE status off PoE status lights up green Supply voltage is applied No link Link is active Link is active and data is transferred 10 Mbit/s 100 Mbit/s PoE is inactive / low voltage Voltage in PoE range PoE status lights up blue Voltage in PoE+ range PoE-Status lights up red Error Enclosures Enclosures width Dimensions H x W x D (without pluggable screw contact and holding bracket) Weight Type of installation Material enclosures Protection degree (withplugged screw contact) Protection class 120 mm 113.5 mm x 120 mm x 27.3 mm 364 g ... 420 g 35 mm DIN rail acc. to EN 60 715 Anodised aluminium IP30 III Approvals CE, FCC CFR 47 Part 15, cUL US 508 listed, DNV GL, LR, NK, ABB IIT ECE - Approval mark (E1): see table technical characteristics EMC and environmental conditions EMC Interference immunity (EN 61000-6-1, 61 000-6-2 55024) Electrostatic discharge (ESD) EN 61 000-4-2 Electromagnetic field EN 61 000-4-3 Rapid transients (burst) EN 61 000-4-4 Surge voltages EN 61 000-4-5 Conducted interference voltages EN 61 000-4-6 EMC Interference emission (EN 61000-6-4, EN 55 032, FCC CFR 47 Part 15) Mechanical stability (EN 60721-3) IEC 60068-2-6 Vibration IEC 60068-2-6 Vibration resonance search IEC 60068-2-27 Shock test Included in delivery Pluggable screw contact for voltage supply Assembly instruction Drawings Technical characteristics / order information Ports / order information RJ45 SFP SC Enclosures width Current consumption@ 54 VDC with PoE Commercial Temp.: 0 C ... +55 C MTBF in Mio. h Switch Part no. Industrial Temp.: -40 C ... +70 C Switch Part no. 5 - - 120 mm 2.39 A 0.84 Ha-VIS eCon 2050B-A-P 24 02 005 00301 Ha-VIS eCon 2050BT-A-P 24 02 005 00201 6 6 - 1x MM (2 km) 1x SM (15 km) 120 mm 120 mm 2.42 A 2.41 A 0.78 0.79 Ha-VIS eCon 2061B-AD-P Ha-VIS eCon 2061B-AF-P 24 02 006 1130 24 02 006 1230 Ha-VIS eCon 2061BT-AD-P Ha-VIS eCon 2061BT-AF-P 24 02 006 1120 24 02 006 1220 6 - 2x MM (2 km) 120 mm 2.43 A 0.76 Ha-VIS eCon 2062B-AD-P 24 02 006 2130 Ha-VIS eCon 2062BT-AD-P 24 02 006 2120 6 - 2x SM (15 km) 120 mm 2.42 A 0.78 Ha-VIS eCon 2062B-AF-P 24 02 006 2230 Ha-VIS eCon 2062BT-AF-P 24 02 006 2220 8 - - 120 mm 2.39 A 0.73 Ha-VIS eCon 2080B-A-P 24 02 008 00301 Ha-VIS eCon 2080BT-A-P 24 02 008 00201 1 E1 Approval Copyright(c) 2014 HARTING Technology Group All rights reserved Date of issue 06.2018 ICPN Datasheet 0836/02