POWER
AD2412N3L-VI
24 Watts
Total Power: 24 Watts
Input Voltage: 90 - 264 Vac
# of Outputs: Single, 12 Volt
SPECIAL FEATURES
Universal AC input
Fully regulated output
EN61000-3-2 compliant
Overcurrent and overvoltage
protection
High efciency
High MTBF
IEC320 AC input receptacle
3 pin (type C14)
Built-in EMI lter (CISPR 22
Class B)
LED power good indicator
AC input fuse
-20 °C to +50 °C operating
temperature (with warm-up period)
Efciency complies with European
CoC v.5 Tier 2 & US DoE Level VI
(Standby power <75 mW)
RoHS compliant
Meets surge requirements:
•  6 KV; EN61000-4-5 Surge 6 kV,
Criteria A
•  2.5 KV; K.21, Basic Levels, |
Criteria A
•  6 KV; K.21, Enhanced Levels,
Criteria B
SAFETY
UL 60950-1 (UL listed, LPS product)
CSA-C22.2 No.60950
TUV EN/IEC60950-1
CE Mark: LVD & EMC
CCC Certicate
CB Certicate
Other Approvals: RCM, PSE, GS,
NOM, NRCan, DoE, CEC
Electrical Specications
Input
Input range 90 - 264 Vac (wide range)
Frequency 47 - 63 Hz
Inrush current 50 A maximum @ 230 Vac, cold start 25 °C
Input current 1 A maximum
Efciency 87% typical
EMI/RFI FCC Part 15, Class B & EN55022 (CISPR 22) Class B
Safety ground leakage
current
250 µA maximum @ 50/60 Hz, 264 Vac input
Output
Output voltage 12 V
Maximum power (Po) 24 W
Hold-up time 20 ms minimum at full load @ 115 Vac, 60 Hz
13 ms at -20 °C; 20 ms after 30 minutes warm-up time
Overvoltage protection 28 V
Latching type, recycle AC to reset
Overcurrent protection Output short circuit protection auto recover
Overload protection @ 2.5 - 5 A
Thermal protection Latching type, recycle AC to reset
Cable/connector
DC cable with 2.5 mm I.D. / 5.5 mm O.D. center plug
DC plug center +v
DC plug outer -v
Data Sheet
AD2412N3L-VI Data Sheet
WORLDWIDE OFFICES
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks
and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are
trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject
to change without notice. © 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal
terms and conditions, please visit www.artesyn.com/legal.
www.artesyn.com
AD2412N3L-VI DS 14Aug2017
Mechanical Drawing
Ordering Information
Model Number Maximum
Power
Output
Voltage
Minimum
Load
Maximum
Load Peak Load1Regulation2Ripple
P/P (PARD)3,4
AD2412N3L-VI 24 W 12 Vdc 0.1 A 2 A 2.4 A ± 5% < 120 mV
1. Peak current lasting 200 ms every 3 seconds.
2. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3. Peak-to-peak with 20 MHz bandwidth and 10μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges.
4. Ripple 240 mV at -20 °C; 120 mV after 30 minutes warm-up time
5. Surge Criteria A: Equipment shall withstand the test without damage and shall operate within the specified performance limits after the test without manual intervention.
Surge Criteria B: Equipment may be damage but will not cause any fire or safety hazard
Environmental Specications
Operating temperature -20 °C to +50 °C ambient (with warm-up period)
Storage temperature -45 °C to +85 °C
Electromagnetic susceptibility
Designed to meet EN61000-4-2, -4, -5, level 3; EN61000-4-3, -6, 6v/m; EN61000-3-3 and EN61000-3-2
Class A
Humidity Operating; non-condensing 5% to 90% RH
MTBF calculated > 850,000 hours at full load and 25 °C ambient conditions
Telcoredia SR332 issue 1 (Method 1, Case 3)
AC INLET
1.89"
(48)
4.13"
(105)
47.25"
(1200 )
MODEL LABEL
1.30"
(33)
Notes:
1. Specifications subject to change
without notice.
2. All dimensions in inches (mm),
tolerance is ± 0.02” (±0.5 mm)
3. Warranty: 2 years
4. Weight: 0.61 lb./ 0.28 kg
5. AC input power cord sold separately
6. Specifications at factory settings
at 115 Vac input, 25 °C unless
otherwise stated
7. AC Input Connector: IEC320, C13