157
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors
RF Coax Connectors
Product Facts
■Interface designed for
multiple interconnects
■For high performance
microwave system
requirements
■Module to module, module
to motherboard, fixed and
float mount
■Bulkhead or panel mount
■For flexible and semi-rigid
cable
OSP miniature connectors
for semi-rigid cable meet
high performance require-
ments for microwave
multiple interconnects.
Standard units are available
in bulkhead or panel mount
designs for either direct
solder or solderless com-
pression crimp attachment.
Complete tooling for both
versions is located in the
Tooling Section of this
catalog.
Jack connectors are avail-
able in either float or rigid
mount. Rigid mount units will
function to specifications up
to ±.10 [.004] radial mis-
alignment with the mating
plug connector. Applications
requiring greater than ±.10
[.004 ] radial misalignment
can use either the float
design or floating connector
plates with guide pins.
The solderless compression
crimp attachment meets
high performance require-
ments for microwave sys-
tem applications. The cable
attachment is permanent
and highly reliable.
Ease of assembly permits
users unskilled in soldering
techniques to rapidly pro-
duce cable assemblies with
consistently excellent
mechanical and electrical
performance.
158
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
RF Coax Connectors
Engineering Data
Impedance — 50 ohms
Frequency — dc to 22.0 GHz
Temperature Rating — -65° to 125° C
Electrical RG 402 (.141) Semi-Rigid RG 405 (.085) Semi-Rigid
VSWR —
dc - 18.0 GHz 1.02 + .005f (GHz) 1.05 + .005f (GHz)
18.0 - 22.0 GHz 1.02 + .008f (GHz) 1.05 + .009f (GHz)
RF Transmission Loss — .03 x √--
f (GHz) .03 x √--
f (GHz)
Insulation Resistance — 5,000 megohms min. 5,000 megohms min.
Contact Resistance —
Center Contact 2.0 milliohms max. 2.0 milliohms max.
Outer Contact 2.0 milliohms max. 2.0 milliohms max.
Outer Contact to Cable 0.5 milliohms max. 0.5 milliohms max.
Dielectric Withstanding Voltage — 1500 volts RMS 1000 volts RMS
Corona Extinction Voltage at 70,000 Ft.— 375 volts min. 335 volts min.
RF High Potential at 5 MHz — 1,000 volts RMS 670 volts RMS
RF Leakage Interface Only — -(90-fGHz) dB min. (fully mated) -(90-fGHz) dB min. (fully mated)
Power Handling — 300W at 3 GHz (sea level) and room temperature
Environmental
Corrosion — Method 101, Condition B, MIL-STD-202
Vibration — Method 204, Condition D, 20G’s, MIL-STD-202
Shock — Method 213, Condition I, 100G’s, MIL-STD-202
Temperature Cycling — Method 107, Condition B, MIL-STD-202
Moisture Resistance — Method 106, MIL-STD-202
Material
Housing — Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582
Center Contact — Beryllium copper per ASTM-B-196
Dielectric — TFE fluorocarbon per ASTM-D-1457
Gasket (O’Ring) — MIL-P-25732
Mechanical
Force to Engage — 3 pounds max.
Force to Disengage — 1.5 pounds max.
Center Contact Retention — 6 pounds min.
Durablilty — 5,000 Cycles
Radial Misalignment —
Rigid Mount ±.10 [±. 004]
Float Mount ±.51 [±.020]
Mating Characteristics
Jack Connector —
Center Contact Socket Oversize test Pin — .945 + .003 [.0372 + .0001] dia.
Test Pin Finish — 16 micro inch
Insertion Depth — .76/1.14 [.030/.045]
Number of Insertions — 3
Insertion Force Test Pin — .940 + .003 [.0370 + .0001] dia.
Test Pin Finish — 16 micro inch
Insertion Depth — 1.27/1.91 [.050/.075]
Insertion Force — 3 pounds max.
Withdrawal Force Test Pin — .90 + .003 [.0355 - .0001] dia.
Test Pin Finish — 16 micro inch
Insertion Depth — 1.27/1.91 [.050/.075]
Withdrawal — 1 ounce min.
Finish
Center Contact — Gold plate per MIL-G-45204, Type II, Class 1 over copper plate per MIL-C-14550
Housing — Gold plate per MIL-G-45204, Typ II, Class 0 over nickel plate per QQ-N-290, Class 2
or passivate per ASTM-A380
The specifications given
refer specifically to mated
pair of Part Numbers
1059410-1 and 1059402-1
(RG 402) and 1059412-1
and 1059404-1 (RG 405).
Specifications on other con-
nectors are available on
request.
The general electrical,
mechanical and environ-
mental specifications in the
following table are recom-
mended for procurement
documents or drawings.
All dimensions shown are nominal.
Contact the factory for specific
tolerances.
159
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
Interface Mating Dimensions
RF Coax Connectors
The connector interface,
specifically designed for
multiple interconnects, main-
tains reliable performance
over the typical mechanical
tolerance required in cost
effective packaging.
The interface test data
shows excellent perform-
ance is maintained with mat-
ing gaps up to 0.38 [.015].
Meets MIL-STD-348 Figure
321. Intermateable to BMA
Connectors. Jack Plug
Letter Dimensions
A1.78
.070 Nom.
B5.72
.225 Min.
C7.62
.300 Ref.
D5.00
.197 Nom.*
E5.08
.200 Max.
F3.23
.127 Max.*
*With spring bottomed
Letter Dimensions
A1.78
.070 Nom.
B5.33
.210 Nom.
C7.62
.300 Ref.
D5.05
.199 Min.
E0.91
.036 Nom.
F3.25
.128 Min.
160
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment
RF Coax Connectors
Bulkhead Feedthrough
Cable Plug
Rear Mount
A
Dia.
B
Dia.
Hex.
17.5
[.690]
7.9
[.312]
Max.
ed
9.19
[.362]
Dia.
6.1 ± 0.03
[.240 ± .001]
+ 0.03
– .000
+ .001]
– .000
6.1
[.242
Recommended
Mounting Hole
Dia.
Flange Mount Cable Jack
Floating Rear Mount
B Dia.
18.0
[.710]
OSP Jack
14.2
[.560] Dia.
19.1
[.750]
Dia.
2 Holes
A
Dia. + 0.25
– 0.00
+ .010
– .000
9.5
[.375 ]
+ 0.10
– 0.03
+ .004
– .001
2.6
[.102 ]
Dia.
7.1
[.280]
9.5
[.372]
14.2 ± 0.10
[.560 ± .004]
+ 0.05
– 0.03
+ .002]
– .001
9.6
[.377
Recommended
Mounting Hole
Cable Dimensions Part No.
AB
RG 402/U
3.58 3.7 4.6 1059453-1
.141 .144 .180
RG 405/U
2.16 2.3 3.0 1059456-1
.085 .089 .120
Finish: Inner housing that is soldered to cable is gold plated. Outer housing is
passivated stainless steel.
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
Bulkhead Feedthrough
Cable Jack Rigid
Rear Mount
A
Dia.
B
Dia.
Hex.
18.0
[.710]
11.1
[.437]
Dia.
6.4
[.250]
Max.
9.19
[.362]
ed
ole
+ 0.03
– .000
+ .001]
– .000
9.1
[.359
11
[.43
Dia.
Recommended
Mounting Hole
Cable Plating Dimensions Part No.
AB
RG 402/U
3.58 Gold 3.7 4.6 1059410-1
.141 .144 .180
RG 405/U
2.16 Gold 2.3 3.0 1059412-1
.085 .089 .120
Cable Plating Dimensions Part No.
AB
RG 402/U
3.58 Gold 3.7 4.6 1059402-1
.141 .144 .180
RG 405/U
2.16 Gold 2.3 3.0 1059404-1
.085 .089 .120
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
161
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment (Continued)
RF Coax Connectors
Dia.
16.2
[.640]
Dia.11.2
[.440] Max.
9.3 ± 0.03
[.365 ± .001]
A
Dia.
B
Dia.
Cable Plating Dimensions Part No.
AB
RG 402/U
3.58 Gold 3.7 4.6 1059505-1
.141 .144 .180
RG 405/U
2.16 Gold 2.3 3.0 1059506-1
.085 .089 .120
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
Low Profile — Panel
Feedthrough Cable Jack —
Floating Rear Mount
A Dia.
B
Dia.
18.0
[.710]
Dia.
7.6
[.300]
Cable Plating Dimensions Part No.
AB
RG 402/U
3.58 Gold 3.7 4.6 1059465-1
.141 .144 .180
RG 405/U
2.16 Gold 2.3 3.0 1059467-1
.085 .089 .120
Recommended removal tool part number 1059774-1 is described in the
Tooling Section of this catalog.
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
Panel A ±.003 Panel B ±.003 Stand-Off Panel C +.050/–.000
2.3 9.5 7.2
.090 .375 .285
2.3 11.1 5.6
.090 .438 .222
2.3 12.7 4.1
.090 .500 .160
3.2 9.5 6.4
.125 .375 .250
3.2 11.1 4.7
.125 .438 .187
3.2 12.7 3.2
.125 .500 .125
Low Profile — Bulkhead
Feedthrough Cable Jack —
Floating Rear Mount
Recommended Mounting Detail
Stand-Off C
Panel APanel
B
+ 0.08
– 0.00
+ .003]
– .000
8.6
[.340
+ 0.05
– 0.00
+ .002]
– .000
8.0
[.316
+ 0.00
– 0.13
+ .000]
– .005
1.3
[.050
Panel
B
Dia.
16.2
[.640]
Dia.11.2
[.440] Max.
9.3 ± 0.03
[.365 ± .001]
A
Dia.
B
Dia.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
162
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Solderless Compression Crimp Attachment
RF Coax Connectors
Bulkhead Feedthrough
Cable Plug
Fixed Rear Mount
Dia. Hex.
Dia.
B
7.9
[.312]
5.5
[.218] Max.
9.19
[.362]
6.1 ± 0.03
[.240 ± .001]
A
Dia.
d
+ 0.03
– .000
+ .001]
– .000
6.1
[.242 Dia.
Recommended
Mounting Hole
Flange Mount Cable Jack
Floating Rear Mount
B
Dia.
9.7
[.380]
14.2
[.560]
Dia.
9.5
[.372] Dia.
5.5
[.218]
Dia.
19.1
[.750]
Dia.
2 Plcs.
2.6
[.102]
A
Dia.
Dia.
7.1
[.280]
9.5
[.372
14.2 ± 0.10
[.560 ± .004]
+ 0.05
– 0.03
+ .002]
– .001
9.6
[.377
Recommended
Mounting Hole
Bulkhead Feedthrough
Cable Jack
Fixed Rear Mount
Hex.
B
11.1
[.437]
Dia.
6.4
[.250]
Dia.
5.5
[.218] Max.
12.7
[.500]
A
Dia.
d
+ 0.03
– .000
+ .001]
– .000
9.1
[.359
11
[.43
Dia.
Recommended
Mounting Hole
Dim. B
Cable Plating Dim. A Before After Part No.
Crimping Crimping
RG 405/U Passivated
2.16 Stainless 2.2 19.8 17.2 1059399-1
.085 Steel .088 .782 .677
Outline drawing shows after crimp dimensions.
Dim. B
Cable Plating Dim. A Before After Part No.
Crimping Crimping
RG 402/U Passivated
3.58 Stainless 3.6 21.1 18.2 1059408-1
.141 Steel .143 .830 .715
Outline drawing shows after crimp dimensions.
Dim. B
Cable Plating Dim. A Before After Part No.
Crimping Crimping
RG 402/U Passivated
3.58 Stainless 3.6 22.6 19.8 1059451-1
.141 Steel .143 .891 .780
RG 405/U Passivated
2.16 Stainless 2.2 22.6 19.8 1059452-1
.085 Steel .088 .891 .780
Outline drawing shows after crimp dimensions.
When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
163
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
For Flexible Cable, Crimp Attachment
RF Coax Connectors
Bulkhead Feedthrough
Cable Plug
Rear Mount
Max.
34.9
[1.375]
Ref.
21.2
[.833]
11.4
[.447]
Dia.
6.9 ± 0.03
[.240 ± .001]
ded
Hole
+ 0.03
– .000
+ .001]
– .000
6.1
[.242
11
[.44
Dia.
6.9 ±
[.240
Recommended
Mounting Hole
Flange Mount Cable Jack
Floating Rear Mount
Dia.
9.5
[.372]
Dia.
21.7
[.875] Ref.
35.6
[1.400] Max.
2.6
[.102]
Dia.
2 Plcs.
19.1
[.750]
Dia.
14.2
[.560]
9.5
[.375]
7.1
[.280]
14.2 ± .102
[.560 ± .004]
+ .051
– .025
+ .002]
– .001
9.6
[.377 Dia.
9.5
[.372
Dia
Recommended
Mounting Hole
Bulkhead Feedthrough
Cable Jack
Rigid Rear Mount
Max.
35.6
[1.400]
Ref.
21.7
[.855]
6.4
[.250]
Dia.
9.1 ± 0.03
[.357 ± .001]
+ 0.03
– .000
+ .001]
– .000
9.1
[.359 Dia.
Recommended
Mounting Hole
Cable Plating Part No.
RG 174/U, 179,
187, 188, 316 Passivated Stainless Steel 1059523-1
Cable Plating Part No.
RG 55/U, Passivated Stainless Steel 1059540-1
142, 223, 400
RG 174/U, 179, Passivated Stainless Steel 1059541-1
187, 188, 316
RG 178, Passivated Stainless Steel 1058572-1
Double Braid
Cable Plating Part No.
RG 55/U,
142, 223, 400 Passivated Stainless Steel 1059525-1
Low Profile — Panel
Feedthrough Cable Jack —
Rear Mount
7.6
[.300]
Dia.
35.6
[1.400]
22.3
[.878]
Max.
Ref.
Dia.
+ 0.05
– 0.03
+ .002]
– .001
9.4
[.368
Recommended
Mounting Hole
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.
Cable Plating Part No.
RG 174/U, 179, Passivated Stainless Steel 1059551-1
187, 188, 316
Refer to Recommended Mounting Hole Detail for Semi-Rigid Cable Low
Profile Feedthrough Cable Jack.
Recommended removal tool part number 1059774-1 as described in the
Tooling Section of this catalog.
164
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Panel Mount
Straight Terminal
2-Hole Flange Mount Plug
Receptacle
22.3
[.878]
8.4
[.330]
9.9
[.390]
1.7
[.065]
6.4
[.250]
4.1
[.162]
1.3
.050 Dia.
Dia.
Dia.
15.9
[.625]
12.2
[.481]
6.6
[.260]
2.6
[.102] Dia.
2 Plcs.
4-Hole Flange Mount Plug
Receptacle
Dia.
6.4
[.250]
22.3
[.878]
Dia.
2 Plcs.
2.6
[.102]
Sq.
12.7
[.500] Typ.
8.6
[.340]
Dia.
1.3
[.050]
Dia.
4.1
[.162]
2-Hole Flange Mount Jack
Receptacle
7.6
[.300]
12.2
[.481]
Dia.
1.3
[.050]
27.4
[1.080]
Dia.
4.1
[.162]
15.9
[.625]
Dia.
2 Plcs.
2.6
[.102]
Plating Part No.
Passivated
Stainless 1059566-1
Steel
Plating Part No.
Passivated
Stainless 1059596-1
Steel
Plating Part No.
Passivated
Stainless 1059563-1
Steel
Plating Part No.
Passivated
Stainless 1059594-1
Steel
4-Hole Flange Mount Jack
Receptacle
27.4
[1.080]
Dia.
2 Plcs.
2.6
[.102]
Sq.
12.7
[.500] Typ.
8.6
[.340]
Dia.
1.3
[.050]
Dia.
4.1
[.162]
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
165
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Panel Mount (Continued)
Straight Terminal
Threaded Installation —
Panel Feedthrough Plug
Receptacle
10.4
[.410] 6.4
[.250]
Dia.
0.5
[.020] Dia.
1.6
[.064]
Dia.
Dia.
5.3
[.210]
5.5 ± 0.03
[.218 ± .001]
5.3 ± 0.05
[.210 ± .002]
Dia.
Panel
1.7 ± 0.03
[.066 ± .001]
Recommended
Mounting Hole
Threaded Installation —
Panel Feedthrough Jack
Receptacle
10.4
[.410] 6.4
[.250]
Dia.
0.5
[.020] Dia.
1.6
[.064]
Dia.
Dia.
5.3
[.210]
5.5 ± 0.03
[.218 ± .001]
5.3 ± 0.05
[.210 ± .002]
Dia.
Panel
1.7 ± 0.03
[.066 ± .001]
Recommended
Mounting Hole
Plating Part No.
Passivated
Stainless 1059617-1
Steel
Plating Part No.
Passivated
Stainless 1059657-1
Steel
Plating Part No.
Passivated
Stainless 1059651-1
Steel
Plating Part No.
Passivated
Stainless 1059654-1
Steel
6.4
[.250]
7.92
[.312]
Dia.
7.6
[.300]
Dia. Dia.
0.5
[.020]
6.4 ± 0.03
[.250 ± .001]
+ 0.05
– .000
+ .002]
– .000
6.4
[.253 Dia.
Dia.
1.2 ± 0.03
[.046 ± .001]Dia.
+ .000
– 0.05
+ .000]
– .002
6.3
[.248 Dia.
Recommended
Mounting Hole
Press Fit Installation —
Panel Feedthrough Jack
Receptacle
Press Fit Installation —
Panel Feedthrough Plug
Receptacle
6.4
[.250]
Dia.
7.6
[.300]
Dia.
0.5
[.020]
6.4 ± 0.03
[.250 ± .001]
+ 0.05
– .000
+ .002]
– .000
6.4
[.253 Dia.
Dia.
1.2 ± 0.03
[.046 ± .001]Dia.
+ .000
– 0.05
+ .000]
– .002
6.3
[.248 Dia.
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
166
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Printed Circuit Board Mount
Straight Plug Receptacle —
Captured Contact
Dia.
1.3
[.050]
12.7
[.500]
6.4
[.250]
Sq.
Sq.
4 Plcs.
1.0
[.040]
5.1
[.200]
Typ.
5.1
[.200]
Typ.
+ 0.08
– .000
+ .003]
– .000
1.7
[.067 Dia.
Hole Typ.
Recommended
Mounting Hole
Plating Part No.
Gold 1059684-1
Plating Part No.
Gold 1059681-1
Plating Part No.
Gold 1059691-1
Straight Jack Receptacle —
Captured Contact
Dia.
Dia.
1.3
[.050]
13.5
[.530]
9.5
[.375]
Sq.
4 Plcs.
1.0
[.040]
5.1
[.200]
Typ.
5.1
[.200]
Typ.
+ 0.08
– .000
+ .003]
– .000
1.7
[.067 Dia.
Hole Typ.
Recommended
Mounting Hole
Right-Angle Plug
Receptacle —
Captured Contact
Surface Mount
Vertical Plug with
Small Leg
Dia.
Sq.
1.3
[.050]
13.5
[.530]
6.4
[.250]
15.0
[.590]
Sq.
4 Plcs.
1.0
[.040]
5.1
[.200]
Typ.
5.1
[.200]
Typ.
+ 0.08
– .000
+ .003]
– .000
1.7
[.067 Dia.
Hole Typ.
Recommended
Mounting Hole
Plating Part No.
Gold 1253111-1
Dia.
OSP
Plug
Sq.
1.3
[.050]
9.4
[.372]
O-Ring 6.4
[.250]
Sq.
4 Plcs.
1.6
[.062]
4.5
[.178]
Typ.
4.5
[.178]
Typ.
+ 0.08
– .000
+ .003]
– .000
1.7
[.067 Dia.
+ 0.08
– .000
+ .003]
– .000
2.5
[.098
Dia. Hole
Typ.
4 Plcs.
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
167
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Hermetically Sealed
Metal-To-Metal
Rigid Gasket Seal —
Panel Feedthrough
Plug Receptacle
Field Replaceable
Solder and Braze-In
Panel Feedthrough Plug
Receptacle
10.4
[.410]
0.5
[.020] Dia.
Rigid
Gasket
5.3
[.210] Dia.
1.6
[.064]
Dia.
9.9
[.390]
5.3
[.210] Dia. Dia.
Dia.
Glass Seal
5.6 ± 0.13
[.220 ± .005]
0.5 ± 0.03
[.020 ± .001]
+ 0.05
– 0.03
+ .002]
– .001
4.0
[.158
Rigid Gasket Seal —
Panel Feedthrough
Jack Receptacle
11.2
[.450]
0.5
[.020]Dia.
1.6
[.064]
Dia.
5.3
[.210] Dia.
Rigid
Gasket
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.04 + .009f –(90-fGHz) Passivated stainless steel 6059632-1
Installation Thermal Limit: 250°C.
Recommended Mounting Hole Detail A follows, pg 168.
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.04 + .009f –(90-fGHz) Passivated stainless steel 6059665-1
Installation Thermal Limit: 250°C.
Recommended Mounting Hole Detail A follows, pg 168.
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(90-fGHz) Passivated stainless steel 1059637-1
Recommended Mounting Detail B or E follows, pg 168.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
168
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Hermetically Sealed (Continued)
Field Replaceable
Solder and Braze-In
(Continued)
Panel Feedthrough Jack
Receptacle
Recommended
Mounting Hole Detail
10.7
[.421]
Dia.
Dia.
5.6 ± 0.13
[.220 ± .005]
0.5 ± 0.03
[.020 ± .001]
+ 0.05
– 0.03
+ .002]
– .001
4.0
[.158
Glass Seal
Dia. Dia.
5.5 ± 0.03
[.218 ± .001]1.7 ± 0.03
[.066 ± .001]
6.4
[.250]
Ref.
Panel
2-Hole Flange Mount Plug
Receptacle With EMI/RFI
Gasket — 0.5 [.018] Dia.
Contact
Detail A*
Dia.
5.5 ± 0.03
[.218 ± .001]
Ref. Panel
6.4 ± 0.08
[.250 ± .003]
Dia.
+ .000
– 0.05
+ .000
– .002
4.1
.162 ]
[
Detail B* (6.35 [.250] Panel Thickness)
2.6 ± 0.03
[.102 ± .001]
Dia.
3.2 ± 0.13
[.125 ± .005]
Panel
12.2
[.481]
Ref.
Detail C*
2.9 ± 0.03
[.115 ± .001]
Dia.
3.2 ± 0.13
[.125 ± .005]
Panel
12.2
[.481]
Ref.
Detail D*
Dia.
5.5 ± 0.03
[.218 ± .001]
3.2 ± 0.03
[.125 ± .001]
Ref. Panel
7.6 ± 0.08
[.300 ± .003]
Dia.
+ .000
– 0.03
+ .000
– .001
4.1
.162 ]
[
Detail E*
9.5
[.375]
6.4
[.250] Dia. Dia.
Dia.
8.0 ± 0.13
[.315 ± .005]0.5 ± 0.03
[.018 ± .001]
+ 0.05
– 0.03
+ .002]
– .001
2.8
[.112
6.6
[.260]
12.2
[.481]
15.9
[.625]
Dia.
2 Plcs.
2.6
[.102]
*Consult appropriate Instruction Sheet for complete mounting details.
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(90-fGHz) Passivated stainless steel 1059671-1
Recommended Mounting Detail B or E follows at bottom of this page.
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(90-fGHz) Passivated stainless steel 1059572-1
Recommended Mounting Detail D follows at bottom of this page.
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
169
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors
Engineering Data
Impedance — 50 ohms
Frequency — dc to 28.0 GHz
Temperature Rating — -65° to 125° C
Electrical RG 405 (.085) Semi-Rigid
VSWR — 1.05 + .01f (GHz)
RF Transmission Loss — .040 x √--
f (GHz)
Insulation Resistance — 5,000 megohms min.
Contact Resistance —
Center Contact 6.0 milliohms max.
Outer Contact 3.0 milliohms max.
Outer Contact to Cable 0.5 milliohms max.
Dielectric Withstanding Voltage — 675 volts RMS
Corona Extinction Voltage at 70,000 Ft.— 250 volts min.
RF High Potential at 5 MHz — 675 volts RMS
RF Leakage Interface Only — -(90-fGHz) dB min. (fully mated)
Power Handling — 300W at 3 GHz (sea level) and room
temperature
Environmental
Corrosion — Method 101, Condition B, MIL-STD-202
Vibration — Method 204, Condition D, 20G’s, MIL-STD-202
Shock — Method 213, Condition I, 100G’s, MIL-STD-202
Temperature Cycling — Method 107, Condition B, MIL-STD-202
Moisture Resistance — Method 106, MIL-STD-202
Material
Housing — Corrosion resistant steel Type 303 (stainless) per
ASTM A484 and A582
Center Contact — Beryllium copper per ASTM-B-196
Dielectric — TFE fluorocarbon per ASTM-D-1457
Gasket (O’Ring) — MIL-P-25732
Mechanical
Force to Engage — 3 pounds max.
Force to Disengage — 1.5 pounds max.
Center Contact Retention — 4 pounds min.
Durablilty — 1,000 Cycles
Radial Misalignment —
Rigid Mount ±.06 [±.0025]
Float Mount ±.51 [±.020]
Mating Characteristics
Jack Connector —
Center Contact Socket Oversize test Pin — .533 + .003 [.0210 + .0001] dia.
Test Pin Finish — 16 micro inch max.
Insertion Depth — .76/1.14 [.030/.045]
Number of Insertions — 3
Insertion Force Test Pin — .528 + .003 [.0208 + .0001] dia.
Test Pin Finish — 16 micro inch
Insertion Force — 3 pounds max.
Withdrawal Force Test Pin — .495 + .003 [.0195 - .0001] dia.
Test Pin Finish — 16 micro inch max.
Insertion Depth — 1.27/1.91 [.050/.075]
Withdrawal — 1/2 ounce min.
Finish
Center Contact — Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Housing — Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Product Facts
■Subminiature version of
OSP Blind Mate Connectors
■For space savings
■Family of connectors and
adapters
OSSP connectors are a sub-
miniature version of the OSP
blind mate series.
Connectors in this series
incorporate the design ele-
ments of the OSP interface
including the float and mis-
mate features. OSSP blind
mates are about 40%
smaller than OSP connec-
tors and are designed to be
used in applications where
space is at a premium.
A complete family of OSSP
connectors and adapters is
available including cable
connectors, fixed and float
mount panel connectors
and hermetic connectors.
Rigid mount units will func-
tion to specifications up to
±.064 [±.0025] radial mis-
alignment with the mating
plug connector.
Applications requiring
greater than ±.064 [±.0025]
radial misalignment can use
either the float design or
floating connector plates
with guide pins.
170
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
Interface Mating
Dimensions
The connector interface,
specifically designed for
multiple interconnects,
maintains reliable perform-
ance over the typical
mechanical tolerance
required in cost effective
packaging.
The interface test data
shows excellent perform-
ance is maintained with mat-
ing gaps up to .015 inch.
Jack Plug
Dimensions
Description ABCDEF
Jack 1.22 Nom. 3.91 Min. 5.33 Ref. 5.00 Nom.* 3.35 Max. 3.23 Max.*
0.48 .154 .210 .197 .132 .127
Plug 1.22 Nom. 3.56 Nom. 5.33 Ref. 5.00 Min. 0.51 Nom. 3.25 Min.
0.48 .140 .210 .199 .020 .128
*With spring bottomed.
171
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment
Bulkhead Feedthrough
Cable Plug — Rear Mount
Dia.
17.5
[.690]
3.0
[.120]
Dia. Min.
2.3
[.089]
Max.
7.3
[.289]
Dia.
4.6 ± 0.03
[.180 ± .001]
d
e
+ 0.03
– .000
+ .001
– .000
4.6
.182
Dia.
[.
[ ]
Recommended
Mounting Hole
Cable Plating Part No.
RG 405/U,
2.16 Gold 1059857-1
[.085]
Cable Part No.
RG 405/U,
2.16 1059868-1
[.085]
Finish: Inner housing that is soldered to cable is gold plated. Outer housing
is passivated stainless steel.
When using semi-rigid cable, it is recommended that a service loop be used
to facilitate the float features of the connector.
Cable Part No.
RG 405/U,
2.16 1059874-1
[.085]
Flange Mount Cable Jack —
Floating Rear Mount
Feedthrough Snap-In
Dia.
18.0
[.710]
3.0
[.120]
7.6
[.300]
11.0
[.435]
Dia.
14.7
[.580]
Dia.
2 Plcs.
Dia.
2.3
[.089]
Dia.
2.4
[.093]
+ 0.08
– 0.00
+ .003
– .000
7.1
[.281 ]
Dia.
+ 0.00
– 0.05
+ .000
– .002
7.1
[.280 ]
ded
ole
Dia.
5.5
[.217]
11.0 ± 0.10
[.435 ± .004]
+ 0.08
– 0.00
+ .003
– .000
7.1
[.281 ]
Dia.
+ 0.00
– 0.05
+ .000
– .002
7.1
[.280 ]
Recommended
Mounting Hole
Dia.
11.4
[.450] Ref.
7.6
[.300]
Dia.
Max.
3.0
[.120] Dia.
6.1
[.240] Dia.
Compression
Spring
Connector
Retaining Clip
Recommended
Mountin
g
Hole
+ 0.08
– 0.00
+ .003
– .000
7.1
[.280 ]
+ 0.05
– 0.00
+ .002
– .000
6.5
[.256 ]
12.7
[.500] Ref. 18.0
[.710]
14.7
[.570]
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
172
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Flexible Cable, Crimp Attachment
Bulkhead Feedthrough
Cable Plug — Rear Mount
Ref.
33.0
[1.298]
Dia.
4.6 ± 0.03
[.180 ± .001]
d
+ 0.03
– .000
+ .001
– .000
4.6
[.182 Dia.
4
[.1
Recommended
Mounting Hole
]
Cable Plating Part No.
RG 188/U,
316 Double Passivated Stainless Steel 1059884-1
Braided Only
RG 174/U,
188/U, 316U Passivated Stainless Steel 1059886-1
Flange Mount
Cable Jack —
Floating Rear Mount
Dia.
35.6
[1.40]
Max.
7.6
[.300]
11.0
[.435]
Dia.
14.7
[.580]
Dia.
2 Plcs.
2.4
[.093]
+ 0.08
– 0.00
+ .003
– .000
.1
81 ]
Dia.
+ 0.00
– 0.05
+ .000
– .002
7.1
[.280 ]
Dia.
5.5
[.217]
11.0 ± 0.10
[.435 ± .004]
+ 0.08
– 0.00
+ .003
– .000
7.1
[.281
Recommended
Mounting Hole
]
D
+ 0.00
– 0.05
+ .000
– .002
7.1
[.280 ]
Cable Plating Part No.
RG 188/U,
316 Double Passivated Stainless Steel 1059888-1
Braided Only
RG 174/U,
188/U, 316U Passivated Stainless Steel 1059887-1
Feedthrough Snap-In
Cable Jack
Part No.
1059889-1
35.6
[1.400] Max.
Dia.
6.1
[.240]
22.4 ± 0.38
[.880 ± .015]
Dia.
Mounting Hole
+ 0.05
– 0.00
+ .002
– .000
6.5
[.256 ]
Dia.
Mounting Hole
+ 0.08
– 0.00
+ .003
– .000
7.1
[.280 ]
Compression
S
p
rin
g
OSSP
Jack Connector
Retaining Clip
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
173
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Panel Mount
Press-Fit Panel
Feedthrough Plug
Receptacle
Part No.
1059901-1
Ø 4.0 ± 0.03
[.156 ± .001]
Straight Knurl
O-Ring
Recommended
Mounting Hole
+ 0.08
– 0.00
+ .003
– .000
Ø 4.0
[.159 ]
+ 0.00
– 0.05
+ .000
– .002
Ø 3.9
[.154 ]
+ 0.05
– 0.00
+ .002
– .000
11.4
[.450 ]
6.4
[.250]
5.1
[.200]
5.3 ± 0.05
[.210 ± .002]
OSSP
Plug Ø 0.9 ± 0.03
[.034 ± .001]
Ø 0.4 ± 0.03
[.015 ± .001]
Threaded Panel
Feedthrough Plug
Receptacle, Straight
Terminal
11.4
[.450] 6.4
[.250]
Dia.
0.4
[.015]
Dia.
1.2
[.049]
Dia. Dia.
4.0
[.156]
4.1 ± 0.03
[.162 ± .001]
5.3 ± 0.05
[.210 ± .002]
Dia.
1.3 ± 0.03
[.051 ± .001]
Recommended
Mounting Hole
Plating Part No.
Passivated
Stainless 1059903-1
Steel
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
174
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Straight Plug Receptacle —
Captured Contact
Part No.
1059919-1
O-Ring
Mounting
Surface
Recommended
Mounting Hole
5 Plcs.
Hol
e
Typ.
Typ.
+ 0.08
– 0.00
+ .003
– .000
Ø 1.7
[.067 ]
5.1
[.200]
4 Plcs.
Sq.
Typ.
1.0
[.040]
8.7
[.343]
12.6
[.498]
OSSP
Plug
5.1
[.200]
5.1
[.200]
6.4
[.250]
Sq.
Ø 0.9
[.034]
Right-Angle
Plug Receptacle
Part Number
1484546-1
O-Ring
Recommended
Mounting Hole
5 Plcs.
Hol
e
Typ.
Typ.
+ 0.08
– 0.00
+ .003
– .000
Ø 1.7
[.067 ]
5.08
[.200]
4 Plcs.
Sq.
1.02
[.040]
5.08 ± 0.51
[.200 ± .020]
5.11 ± 0.03
[
.201 ± .001
]
17.78 ± 0.25
[.700 ± .010]
5.84
[.230] 5.08
[.200]
Typ.
5.08
[.200]
6.35
[.250]
Sq.
Ø 0.86
[.034]
14.61
[.575]
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Printed Circuit Board Mount
Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
OSSP Subminiature Modular Blind Mate Connectors (Continued)
Hermetically Sealed
Metal to Metal
Formable Gasket —
Panel Feedthrough Plug
Receptacle
12.1
[.475]
1.0
[.039]Dia. 3.0
[.118]Dia.
3.6
[.140]Dia.
.03
[.012] Dia.
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(85-fGHz) Gold 1059905-1
Recommended Mounting Hole Detail A at bottom of this page.
Solder and Braze-In
Panel Feedthrough Plug
Receptacle
8.2
[.322]
Ref.
5.3
[.210]Dia.
Dia.
Dia.
+ 0.00
– 0.05
+ .000
– .002
4.8
[.189 ]
0.5 ± 0.03
[.020 ± .001]
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(85-fGHz) Gold 1059902-1
Recommended Mounting Hole Detail B at bottom of this page.
Field Replaceable
Solder and Braze-In
2-Hole Flange Mount
Plug Receptacle With
EMI/RFI Gasket
Recommended
Mounting Hole Detail for
Hermetically Sealed
9.5
[.375]
5.3
[.210] Dia. Dia. Dia.
8.2 ± 0.13
[.322 ± .005]
0.3 ± 0.03
[.012 ± .001]
Dia.
+ 0.05
– 0.03
+ .002]
– .001
1.9
[.076
5.7
[.223]
9.0
[.353]
12.2
[.480]
Dia.
2 Plcs.
2.4
[.093]
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(85-fGHz) Passivated Stainless Steel 1059894-1
Recommended Mounting Hole Detail C at bottom of this page.
Dia.
3.2 ± 0.03
[.121 ± .001]
Ref.
Dia.
+ .003
– 0.05
+ .001
– .002
4.1
[.162 ]
Dia.
+ .000
– 0.03
+ .000
– .001
1.0
[.041 ]
6.4
[.250]
Detail A*
2.5
[.100]
R 0.08
[.003] Max.
+ 0.03
– 0.00
+ .001
– .000
Ø 4.8
[.190 ]
+ 0.08
– 0.00
+ .003
– .000
0.8
[.031 ]
+ 0.08
– 0.03
+ .003
– .001
R 0.13
[.005 ]
+ 0.05
– 0.03
+ .002
– .001
Ø 5.5
[.218
]
Detail B* Detail C*
*Consult appropriate Instruction Sheet for complete mounting procedure.
2.0 ± 0.03
[.078 ± .001]
Dia.
3.2 ± 0.13
[.125 ± .005]
Panel
9.0
[.353]
Ref.
175
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.