ALUMINUM ELECTROLYTIC CAPACITORS WX 5.5mmL Chip Type series Chip type with 5.5mm height. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape. Load life of 2000 hours at 85C. Adapted to the RoHS directive (2002/95/EC). WT WJ High Temperature High Te m p reflow WX WP Bi-polarized Smaller Specifications ZS Item Performance Characteristics Category Temperature Range - 40 ~ +85C Rated Voltage Range 4 ~ 50V Rated Capacitance Range 0.1 ~ 330F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (A) ,whichever is greater. Measurement frequency : 120Hz, Temperature : 20C tan Rated voltage (V) tan (MAX.) 4 6.3 10 16 25 35 50 0.35 (0.40) 0.26 (0.30) 0.20 (0.24) 0.16 (0.19) 0.14 (0.16) 0.12 (0.14) 0.12 (0.14) 4 7 15 Rated voltage (V) Z- 25C / Z+20C Z- 40C / Z+20C Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) After 2000 hours' application of rated voltage at 85C, capacitors meet the characteristic requirements listed at right. Endurance 6.3 4 8 10 3 8 Within 20% of initial value (Within 25% for 4 V and 3,WR series units) 200% or less of initial specified value Capacitance change tan Leakage Current Initial specifed value or less Shelf Life After leaving capacitors under no load at 85C for 1000 hours, they meet the specified value for endurance characteristics listed above. Resistance to soldering heat The capacitors shall be kept on the hot plate maintained at 250C for 30 seconds. After removing from the hot plate and restored at room temperature, they meet the characteristic requirements listed at right. Marking Black print on the case top. Chip Type Within 10% of initial value Initial specified value or less Initial specified value or less Type numbering system (Example : 16V 10F) 0.5 MAX. B0.2 C0.2 5.4 1 +0.1 -0.2 2 3 4 5 6 7 8 9 10 11 12 13 14 UWX 1 C 1 0 0 MC L 1 G B Taping code A0.2 A0.2 Plastic platform 0.3 MAX. E 1 Voltage D0.5 X2 10 16V Capacitance change tan Leakage current Positive Capacitance 2 Lot No. Values in ( ) applicable to WR, 3 case size. Measurement frequency : 120Hz 16 25 35 50 2 2 2 2 4 4 3 3 Size code Configuration Capacitance toleranc (20%) Rated Capacitance (10F) Negative 0.5 ~ 0.8 D A B C E 3 1.5 3.3 3.3 0.8 4 1.8 4.3 4.3 1.0 5 2.1 5.3 5.3 1.3 (mm) 6.3 8 2.4 3.3 6.6 8.3 6.6 8.3 2.2 2.3 D Code 3 2 4~8 1 Rated voltage (16V) Series name Type * In the case of size 3 in ( ),parentheses, use WX in the 2nd and 3rd digit and put a 2 in the 12th digit of type numbering system. 1. Voltage mark for 6.3V is 6V . In case of marking for 3 units, "V" for rated voltage is omitted. 2. In case of marking for 3 units, Lot No.is expressed by a digit (month code). Dimension table in next page. CAT.8100U ALUMINUM ELECTROLYTIC CAPACITORS WX series Dimensions 4 0G V Cap. (F) Code 6.3 0J 10 1A 16 1C 25 1E 35 1V 50 1H 0.1 0R1 4 (3) 1.0 0.22 R22 4 (3) 2.0 0.33 R33 4 (3) 2.8 0.47 R47 4 (3) 4.0 1 010 4 (3) 2.2 2R2 3.3 3R3 4.7 4R7 3 3 10 4 17 4 (3) 16 (12) 4 18 5 20 (18) 5 27 (24) 5 29 (24) 6.3 33 (30) 33 (30) 5 37 (30) 6.3 42 (38) 6.3 46 (39) 8 52 (43) 5 41 (34) 6.3 49 (44) 6.3 52 (46) 8 62 (53) 8 71 45 (40) 6.3 52 (47) 6.3 58 (52) 8 70 (60) 8 80 22 220 3 019 4 (3) 28 (21) 5 33 330 4 028 5 37 (34) 47 470 4 033 5 56 560 5 042 6.3 52 (46) 6.3 57 (50) 6.3 63 (57) 8 100 101 5 056 6.3 70 (47) 6.3 76 (54) 6.3 86 8 150 151 6.3 079 6.3 220 221 6.3 096 8 110 (74) 330 331 8 145 8 170 71 8 111 (76) 8 135 76 (65) 110 ( ) is also available with 3mm upon request. ),parentheses, use WX at 2nd and 3rd digit and put 2 at the 12th digit of type numbering system. } 13 (10) 23 (18) 100 Size 4 is available for capacitors marked. " " Size 5 is available for capacitors marked. " " Size 6.3 is available for capacitors marked. " " 8.4 (8.0) 4 (3) 4 (3) 10 * In the case of size 3 in ( 8.4 Case size Rated D (mm) ripple Rated Ripple (mA rms) at 85C 120Hz ( ) = 3 units and WR Series In such a case, W R will be put at 2nd and 3rd digit of type numbering system. Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25 Please select UR(p.62), UG(p.67) series if high C/V products are reqired. Please refer to page 3 for the minimum order quantity. CAT.8100U