1.6X0.8mm SMD CHIP LED LAMP (0.25mm Height) Part Number: APG1608CGKC/T Green Features Description z 1.6mmX0.8mm SMT LED, 0.25mm thickness. The Green source color devices are made with AlGaInP on z Low power consumption. GaAs substrate Light Emitting Diode. z Wide viewing angle. z Compatible with automatic placement equipment. z Ideal for backlight and indicator. Applications z Package: 2000pcs / reel. 1.Mobile phone Keypad indicator and backlight. z Moisture sensitivity level : level 3. 2.Flat backlight for LCD, switch and symbol. z RoHS compliant. 3.Toys. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI5959 REV NO: V.3 DATE: SEP/28/2010 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008081 Selection Guide Part No. Dice APG1608CGKC/T Iv (mcd) [2] @ 20mA Lens Type Green (AlGaInP) Viewing Angle [1] Min. Typ. 21/2 36 70 120 Water Clear Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 574 nm IF=20mA Green 570 nm IF=20mA Spectral Line Half-width Green 15 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.1 2.6 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 78 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAI5959 REV NO: V.3 DATE: SEP/28/2010 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008081 Green APG1608CGKC/T SPEC NO: DSAI5959 REV NO: V.3 DATE: SEP/28/2010 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008081 APG1608CGKC/T Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAI5959 REV NO: V.3 DATE: SEP/28/2010 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008081 PACKING & LABEL SPECIFICATIONS APG1608CGKC/T SPEC NO: DSAI5959 REV NO: V.3 DATE: SEP/28/2010 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008081