Product Fact Sheet
Industrial
SD/SDHC Memory Card
S-450 Series
UHS-I Interface, SLC
BU: Flash Products
Date : March 29, 20 1 2
Revisi o
n: 1.00
File:
factsheet
-
titel_rz4.
docx
Prod
uct
fact
shee
t
Swissbit AG Swissbit reserves the right to change products or specifications without notice. Revision: 1.01
Industriestrasse 4
CH-9552 Bronschhofen www.swissbit.com S-450_fact_sheet_SD-LxBM_Rev101.docx
Switzerland industrial@swissbit.com Page 2 of 3
S-450 Series (UHS-I, SLC)
Industrial SD/SDHC Memory Card - 512MByte to 32GByte
Main Feature
Fully compliant with SD Memory Card specification 3.0
o SD ultra high speed mode, speed class 1 (SDR104)
o SD high speed mode, up to speed class 10
o SD2.0 SDHC backward compliant, default speed and high speed mode
o FAT32 up to 32GB SDHC
High performance 3.0 specification
o SD burst up to 104MB/s
o SD Normal speed 0…25MHz clock rate
o SD High speed 25…50MHz clock rate
o SD UHS-I speed 0...50MHz (DDR) and 0…208MHz (SDR)
o Up to 90MByte/sec sequential data rate
Power Supply: (Low-power CMOS technology)
o 2.7…3.6V operating voltage
Standard SD Memory card form factor
o 32.0mm x 24.0mm x 2.1mm and Write Protect slider
Optimized FW algorithms especially for high read access and long data retention applications
o Patented power-off reliability technology
o Wear Leveling technology
Equal wear leveling of static and dynamic data. The wear leveling assures that dynamic data as
well as static data is balanced evenly across the memory. With that the maximum write
endurance of the device is guaranteed
o Write Endurance technology
Due to intelligent wear leveling an even use of the entire flash is guaranteed, regardless how
much “static” (OS) data is stored.
o Read Disturb Management
The read commands are monitored and the content is refreshed when critical levels have occurred
o Data Care Management
The interruptible background process maintain the user data for Read Disturb effects or Retention
degradation due to high temperature effects
o Near Miss ECC technology
Minimize the risk of uncorrectable bit failure over the product life time. Each read command
analyzes the ECC margin level and refresh data if necessary
o Diagnostic features with Life Time Monitoring tool support
High reliability
o SLC Flash
o Designed for industrial market especially read intensive application like navigation, infotainment,
POS/POI, medical and general boot medium use case
o The product is optimized for long life cycle that requires good data retention because of high
temperature mission profile.
o For less write and performance critical applications S-4x the more cost efficient S-4x series MLC
cards could be used
o Number of card insertions/removals 20,000
o Extended and Industrial Temperature range -25° up to 85°C and -40° up to 85°C
o SIP (System In Package) process for extreme dust, water and ESD proof
o Selected AEC-Q100 qualification
Controlled BOM & PCN process
Manufactured in a TS 16949 certified factory
Customized options like CID registers, CPRM keys, firmware incl. settings and marking by projects
Swissbit AG Swissbit reserves the right to change products or specifications without notice. Revision: 1.01
Industriestrasse 4
CH-9552 Bronschhofen www.swissbit.com S-450_fact_sheet_SD-LxBM_Rev101.docx
Switzerland industrial@swissbit.com Page 3 of 3
Order Information for S-450 Series UHS-I SD Memory Cards
Density
Part Number
Temp. Range
Flash Technology
512MB
SFSD0512LgBM1TO-t-ME-2xx-STD
t = E -25°C to 85°C
t = I -40°C to 85°C
SLC NAND Flash
1GB
SFSD1024LgBM1TO-t-DF-2xx-STD
2GB
SFSD2048LgBM1TO-t-QG-2xx-STD
4GB
SFSD4096LgBM1TO-t-ME-2xx-STD
8GB
SFSD8192LgBM1TO-t-DF-2xx-STD
16GB
SFSD016GLgBM1TO-t-QG-2xx-STD
32GB
SFSD032GLgBM1TO-t-NG-2xx-STD
g = generation; x = options, firmware and custom configuration
System Performance
System Performance
typ
Unit
Burst Data transfer Rate (max clock 208MHz SDR)
MB/s
Sustained Sequential Read 512MB / 1GB…2GB / 4GB…32GB
28 / 28 / 88
Sustained Sequential Write 512MB / 1GB…2GB / 4GB / 8GB…32GB
18 / 20 / 37 / 73
Current Consumption @3.3V
typ
Unit
Write
60
mA
Read
70
Autoread
120
Idle
1.2
Physical Dimensions
Physical Dimensions
Value
Unit
Length
32.00±0.10
mm
Width
24.00±0.10
Thickness
2.10±0.15
Weight (typ.)
2
g
Recommended Temperature Conditions
Parameter
min
typ
max
Unit
Extended Operating Temperature
-25
25
85*)
°C
Industrial Operating Temperature
-40
25
85*)
°C
Storage Temperature
-40
25
100*)
°C
*) high temperature storage without operation reduces the data retention, in operation the data will be refreshed, if data
error issues were detected
Humidity and EMC
Parameter
Operating
Non Operating
Humidity (non-condensing)
max 95%
ESD
Non Contact Pads area:
±15 kV (air discharge),
according to IEC61000-4-2
Contact Pads:
±6 kV, according to IEC61000-4-2
Non Contact Pads area:
±8kV (indirect) contact discharge,
according to IEC61000-4-2
Durability
Parameter
Operating
Non Operating
Salt water spray
3% NaCI/35°C; 24h acc. MIL STD Method 1009
Insertions / Drop test
>20,000 / 1.5m free fall
Bending / Torque / Bump
10N / 0.15Nm or ±2.5deg
Shock / Vibration (peak -to-peak)
1500G max / 50G max
Data Retention initial @ 40°C
10 years
For more information on SD Memory card Specification, please visit SD association (www.sdcard.org)
Why Swissbit?
Swissbit strives to create innovative technologies for future market opportunities utilizing a highly skilled in-
house product research and development team. Swissbit maintains a marketing edge by continuing to
manufacture world-class high quality memory products and providing customers with both high value and
low cost of ownership achieved through efficient processes and procedures.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Swissbit:
SFSD016GL2BM1TO-E-GE-2A1-STD SFSD2048L1BM1TO-E-QG-221-STD SFSD1024L1BM1TO-E-DF-221-STD
SFSD032GL2BM1TO-E-LF-2A1-STD SFSD032GL1BM1TO-E-NG-221-STD SFSD4096L1BM1TO-E-ME-221-STD
SFSD0512L1BM1TO-E-ME-221-STD SFSD8192L1BM1TO-E-DF-221-STD SFSD8192L2BM1TO-E-GE-2A1-STD
SFSD016GL1BM1TO-E-QG-221-STD SFSD4096L2BM1TO-E-GE-2A1-STD