AMP General Purpose Rectangular (GPR) Connectors General Purpose Rectangular (GPR) Connectors Table of Contents Introduction ...................................................................................................3-4 Performance Characteristics.................................................................................5 GPRA1 Shell Descriptive Part Numbers and Dimensions .......................................6-7 GPRB1 Shell Descriptive Part Numbers and Dimensions .......................................8-9 GPRB2 Horizontal Shells ..............................................................................10-12 GPRB2 Vertical (Square) Shells ...........................................................................13 Insert Descriptive Part Numbers .....................................................................14-18 Insert Arrangements..........................................................................................19 Insert Assemblies for High Speed Applications ................................................20-21 Contacts & Application Tools ........................................................................22-23 Spare Parts & Tools ..........................................................................................23 EMI Backshells & Strain Reliefs ...........................................................................24 Gallery Insert (GAIN) Connectors ........................................................................25 Custom Solutions & In Development Products ......................................................26 Pictured on the front: 1 2 3 4 7 6 5 8 9 1 Custom 4-cavity receptacle shell 2 GPRB2 vertical shell & strain relief assembly 3 GPRB2 GAIN shell - with spring-loaded, float-mounting design 4 GPRB1 plug shell w/F12 LuxCis(R) insert and termini installed 5 F12 LuxCis(R) sleeve holder 6 Size 22 posted PC tail pin, Size 20 crimp pin, Size 5 Coax contacts 7 GPRB2 receptacle shell, with 30 & 40 position inserts installed 8 30 position insert with terminated Size 20 Pin contacts installed 9 Custom 40 position pin insert with PC tail contacts installed 10 GPRA plug shell assembly and 14M socket insert assembly 11 GPRA 14M pin insert assembly (c) 2004, 2005 and 2006 by Tyco Electronics Corporation. All Rights Reserved AMP, PROBEAM and TYCO are trademarks. Skydrol is a trademark of Monsanto Company. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. 11 10 LuxCis is a trademark of Radiall S.A. Product is manufactured under license from Radiall S.A. Product manufactured under license from Radiall, S.A. 2 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Introduction Product Facts A high density solution compared to circular connectors Slim shell design with high contact density Stackable shells that do not require additional space for locking and unlocking the connectors Uses two to three times less space A versatile solution suitable for disconnect panels or equipment with three mounting styles: Rack Cable to cable Panel mounting A modular concept with a large variety of options Shell can accommodate a wide variety of inserts for signal, power, coax, data bus and fiber optic contacts Optional grounding blocks (to meet FAA HIRF requirements) Pin and socket inserts can be mounted on either plug or receptacle shells A cost savings and user friendly solution Inserts can be wired in the shop and later installed in the shells A common panel cut out eases the connector installation and reduces cost Inserts can be easily installed and removed from the shell Inserts and shells are keyed to prevent mismating Standard MIL tools for contact crimping and contact insertion/ extraction Field replaceable sub assemblies Vibration resistant self-locking threads A Smart Connector New Features Tyco Electronics is recognized in the Aerospace and Defense industry for its global offering in interconnect solutions. The General Purpose Rectangular A & B Series connectors complement our ARINC connector line and provide additional flexibility with improved performance in a smaller mating area compared to standard circular MIL-Spec connectors. Connector Interface Insert Arrangements Connectors for Gallery Insert (GAIN) Equipment: * New insert configurations for high speed data transmission both fiber and quadrax The GPRA and GPRB series offer a wide range of solutions based on two insert sizes, a large variety of shells and contacts. The GPRA and GPRB series provides an excellent tradeoff between the number of available contacts and the space actually used. GPRA inserts are a good option for low density applications whereas GPRB inserts offer twice the density of GPRA inserts. In addition, the concept is completely modular and expandable. They can also be easily tailored for custom requirements, such as shell modifications for additional inserts. * Page 25 lists the GPRB2 shells, insert arrangements, contacts, seal plugs, strain reliefs and cable that will be used, per ARINC 810. This is the standard connector interface for new gallery equipment such as ovens and beverage makers for new commercial aircraft. This includes the twin-axial cable and contacts needed for the CANBUS data bus system used for GAIN. Shells GPRB1 * Shells have been improved to a greater level of performance under vibration. Also EMI performance has been maintained while eliminating the need for separate EMI springs. GPRB2 * A new GPRB2 shell with mounting holes of 4.3 mm as been added (PN 1877335-1) * A new 90 exit, low-profile metal backshell has been added (PN 1877338-1) * GPRB - Fiber Optics F12 - holds up to 12 LuxCis(R) fiber optic termini (see page 20) M2 - holds two 4-channel MiniExpanded Beam inserts (see page 21) * GPRB - Quadrax Size 8 quadrax contacts can be used in three insert arrangements - 10Q2, 25Q1 and 3Q3 Quadrax contacts available for use are listed in our Quadrax catalog #1654012. These feature the exclusive Tyco Electronics one-piece dielectric that makes our quadrax contacts the easiest to install. If sealing is required with quadrax or twinax contacts, there is a size 8 seal boot assembly (PN 1877626-1) that is available. Use of this seal boot provides 50,000 foot altitude immersion protection as tested per Boeing Spec BPS-C-179. * Two vertical (square) shell configurations added, along with a strain relief (see page 12) GPRB2 fitted with 80x size 22 contacts MIL-C-38999 21-35 fitted with 79x size 22 contacts LuxCis is a trademark of Radiall S.A. Product is manufactured under license from Radiall S.A. 3 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Introduction (Continued) GPRA1 2 quarter-turn fasteners 16 keying positions Max. density: 20 x #22 contacts GPRB1 2 quarter-turn fasteners 16 keying positions Max. density: 40 x #22 contacts GPRB2 1 central jackscrew/jacknut 12 keying positions Max. density: 80 x #22 contacts 1 shell 8 backshell 2 insert 9 insert insertion/extraction tool 3 contact 10 locking & polarization device 4 & 5 locking device 11 grounding block 6 & 7 polarization device 12 grounding springs 4 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Performance Characteristics Contacts Electrical characteristics conform to MIL-C-39029 Type A Electrical Characteristics Grounding Block Contact Contact to Contact Contact to Mounting Surface Contact with Wire Size Contact + 20 AWG Contact + 20 AWG Current Amps 7.5 7.5 Wire Size 26 AWG 24 AWG 22 AWG 20 AWG 16 AWG 12 AWG 8 AWG Current Amps 2 3 5 7.5 13 23 80 1 Dielectric Withstanding Voltage (MIL-STD-1344/Method 3001.1.1 with Leakage Current < 1 m) Level Sea level 15,240 m [50,000 feet] Voltage (VRMS) 1500 800 Contacts Contact Size 22 20 16 12 5 1 Size 5 contacts are not part of MIL-C-39029 type A. EMI Shielding Effectiveness Frequency (MHz) 100 200 300 400 500 600 Leakage Attenuation (dB) 65 63 63 62 60 60 Insulation Resistance (MIL-STD-1344/Method 3003.1) > 5,000 M > 200 M Ambient Temperature 175C [347F] Other Characteristics Shell to Shell Conductivity -- < 2.5 m Operating Voltage -- 400 Vrms or 500 Vdc at sea level Voltage Stability (Ground Block) -- Maximum variation 4mV (MIL-T-81714) Magnetic Permeability -- < 2 Comparative Tracking Index -- 250 V Mechanical Characteristics Mating/Unmating Durability -- 100 cycles Mating Torque for GPRB2 Jackscrew -- 1.2 Nm [11 in. lbs.] Random Vibration -- GPRA1/GPRB1 -- 20g (MIL-STD-1344/Method 2005.1, test condition 4) GPRB2 -- 41.7g (MIL-STD-1344/Method 2005.1, test condition 6) Shock -- 50g (MIL-STD-1344/Method 2004.1, test condition A) Contact Retention -- (MIL-STD-1344/Method 2007.1 on terminated connectors) Contact Size Ground Block 22 20 16 12 Retention Force 88 N [20 lbs.] 53.4 N [12 lbs.] 89 N [20 lbs.] 111.2 N [25 lbs.] 133.45 N [30 lbs.] Max. Displacement 0.3 mm [.012 in.] 0.38 mm [.015 in.] 0.38 mm [.015 in.] 0.38 mm [.015 in.] 0.38 mm [.015 in.] Insert Retention -- 500 N [112 lbs.] (MIL-STD-1344/Method 2010.1) Environmental Characteristics Temperature Range -- -65C to +155C [-85F to +311F] Temperature Life -- 1000 h @ 155C [311F] Salt Spray -- 96 hours (Nickel plating) (MIL-STD-1344/Method 1001.1, test condition A) Humidity -- 10 days Altitude Immersion -- 3 cycles at 15,240 m [50,000 ft.] (MIL-STD-1344/Method 1004.1) Fluid Immersion -- (MIL-STD-1344/Method 1016) 5 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors GPRA1 Shell Descriptive Part Number Format Descriptive Part Numbering System GPRA 1 Use this guide to construct descriptive part numbers for GPRA1 shells. Refer to table below for the corresponding Tyco Electronics Part Number. P B 0 4 N I - GPRA Series II - Shell Size 1 -- Shell size 1 (1 cavity shell) III - Shell Style P -- R -- W-- Z -- Plug Receptacle Plug with grounding block Receptacle with grounding block and grounding springs IV - Modification Code B -- No mounting holes (for plug only) M -- Panel rear mounted connector with 2 x 6.32 UNC mounting holes for receptacle shell only (see note 1) V - Locking Device 0 -- Quarter-turn fastener VI - Polarization Code 4 -- Shell delivered with polarizing hardware unassembled 5 -- Shell delivered with no polarizing hardware VII - Shell Plating N -- Nickel plating (96H Salt spray) Note 1: Self-locking mounting holes are designed for rear panel mounting. Size Style Modification Locking Device Polarization Hardware Plating 1/4-Turn Fastener Kit: Shell & Hardware Unassembled No Hardware Kit: Shell & Hardware Unassembled No Hardware Kit: Shell & Hardware Unassembled No Hardware Kit: Shell & Hardware Unassembled No Hardware Nickel Plug Plug, with Grounding Block No mounting holes 1 Receptacle Receptacle, with Grounding Block & Grounding Springs Rear Panel Mount, with two 6-32 UNC holes GPRA1WB05N Descriptive Part Number GPRA1PB04N GPRA1PB05N GPRA1WB04N GPRA1WB05N GPRA1RM04N GPRA1RM05N GPRA1ZM04N GPRA1ZM05N Tyco Electronics Part Number 1738228-1 1738229-1 1738230-1 1738231-1 1738232-1 1738233-1 1738234-1 1738235-1 GPRA1ZM05N Panel Rear Mounted Connector 6 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors GPRA1 Shell Dimensions Receptacle Without Grounding Block GPRA1RM05N Plug Without Grounding Block GPRA1PB05N Single Panel Cut Out (See Note 2) Receptacle With Grounding Block GPRA1ZM05N Note 1: Maximum dimension for inserts with grommets (Part Number GPRAE and GPRAH) Note 2: Rear mounting side view with key post oriented to the upper side (receptacle only) Plug With Grounding Block GPRA1WB05N Multiple Panel Cut Out (See Note 2) 7 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors GPRB1 Shell Descriptive Part Number Format Descriptive Part Numbering System GPRB 1 Use this guide to construct descriptive part numbers for GPRB1 shells. Refer to table below for the corresponding Tyco Electronics Part Number. W B 0 5 N I - GPRB Series II - Shell Size 1 -- Shell size 1 (1 cavity shell) III - Shell Style P -- R -- W-- Z -- Plug Receptacle Plug with grounding block Receptacle with grounding block and grounding springs IV - Modification Code B -- No mounting holes (for plug only) M -- Panel rear mounted connector with 2 x 6.32 UNC mounting holes for receptacle shell only (see note 1) V - Locking Device 0 -- Quarter-turn fastener VI - Polarization Code 4 -- Shell delivered with polarizing hardware unassembled 5 -- Shell delivered with no polarizing hardware VII - Shell Plating N -- Nickel plating (96H Salt spray) Note 1: Self-locking mounting holes are designed for rear panel mounting. Size Style Modification Locking Device Polarization Hardware Plating 1/4-Turn Fastener Kit: Shell & Hardware Unassembled No Hardware Kit: Shell & Hardware Unassembled No Hardware Kit: Shell & Hardware Unassembled No Hardware Kit: Shell & Hardware Unassembled No Hardware Nickel Plug Plug, with Grounding Block No mounting holes 1 Receptacle Receptacle, with Grounding Block & Grounding Springs Rear Panel Mount, with two 6-32 UNC holes Descriptive Part Number GPRB1PB04N GPRB1PB05N GPRB1WB04N GPRB1WB05N GPRB1RM04N GPRB1RM05N GPRB1ZM04N GPRB1ZM05N Tyco Electronics Part Number 1738236-1 1738237-1 1738238-1 1738239-1 1738240-1 1738241-1 1738242-1 1738243-1 GPRB1WB05N 8 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors GPRB1 Shell Dimensions Receptacle Without Grounding Block GPRB1RM05N Plug Without Grounding Block GPRB1PB05N Single Panel Cut Out (See Note 2) Receptacle With Grounding Block GPRB1ZM05N Plug With Grounding Block GPRB1WB05N Note 1: Maximum dimension for inserts with grommets (Part Number GPRBE and GPRBH) Note 2: Rear mounting side view with key post oriented to the upper side (receptacle only) Note 3: Only insert with keying A can be used with GPRB1 shells Multiple Panel Cut Out (See Note 2) 9 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors GPRB2 (Horizontal) Shell Descriptive Part Number Format Descriptive Part Numbering System GPRB 2 Use this guide to construct descriptive part numbers for GPRB2 shells. Refer to page 11 for the corresponding Tyco Electronics Part Number. P B 1 2 N I - GPRB Series II - Shell Size 2 -- Shell size 2 (2 cavities shell) III - Shell Style P -- H -- W-- Z -- Plug (see note 1) Receptacle with grounding springs (see note 1) Plug with grounding block (see note 2) Receptacle with grounding block and grounding springs (see note 2) L -- Receptacle with flange and grounding springs (see note 1) IV - Modification Code A -- Panel rear mounted connector with 4 x 6.32 UNC mounting holes (see note 3) B -- No mounting holes D -- Connector with 2 x O 3.10 mm thru holes L -- Panel rear mounted connector with 2 x 4.40 UNC mounting holes (see note 3) V - Locking & Polarizing Device 1 2 3 4 5 -- -- -- -- -- Jackscrew (see note 4) Jacknut (see note 4) Without locking device (see note 5) Pin polarization guide for Rack and Panel application (see note 6) Socket polarization guide for Rack and Panel application (see note 6) VI - Polarization Code 2 -- Polarizing device A to F delivered unassembled (see note 7) 3 -- Polarizing device N to Z delivered unassembled (see note 7) VII - Shell Plating N -- Nickel plating (96H Salt spray) Notes: 1. The standard modification codes for these shells are B, D or L. 2. With modification codes A or B only. 3. Self-locking mounting holes are designed for rear panel mounting. 4. Jackscrew/Jacknut can be mounted on either plug or receptacle shell. However, the standard options are: --Jackscrew for plug shells --Jacknut for receptacle shells 5. Option 3 in paragraph V cancels the polarization code paragraph IV, i.e. the shell is delivered with no polarizing device. 6. Pin/Socket polarization guides can be mounted on either plug or receptacle shells. However, the standard options are: --Pin polarization guide for plug shells --Socket polarization guide for receptacle shells 7. Polarizing device is delivered unassembled, it must be locked with resin by the user (LOCTITETM 272 must be used). --if no polarizing device is required, omit this step and go to VII. 10 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors GPRB2 (Horizontal) Shell Descriptive Part Number Format (Continued) Size Style Modification No mounting holes Locking & Polarization Device N/A Polarization Hardware Jackscrew Pin Polarization Guide Plug Connector with two thru-holes [3.10mm Dia.] N/A Jackscrew Pin Polarization Guide N/A Rear Panel Mount, with two 4-40 UNC holes Jackscrew Pin Polarization Guide N/A No mounting holes Jackscrew Pin Polarization Guide Plug, with Grounding Block N/A Rear Panel Mount, with four 6-32 UNC holes Jackscrew Pin Polarization Guide N/A No mounting holes Jacknut Socket Polarization Guide 2 Receptacle, with Grounding Springs Connector with two thru-holes [3.10mm Dia.] N/A Jacknut Socket Polarization Guide [4.3mm Dia.] N/A Rear Panel Mount, with two 4-40 UNC holes Jacknut Socket Polarization Guide N/A No mounting holes Jacknut Socket Polarization Guide Receptacle, with Flange & Grounding Springs Connector with two thru-holes [3.10mm Dia.] N/A Jacknut Socket Polarization Guide N/A Rear Panel Mount, with two 4-40 UNC holes Jacknut Socket Polarization Guide N/A No mounting holes Socket Polarization Guide Receptacle, with Grounding Block & Grounding Springs N/A Rear Panel Mount, with four 6-32 UNC holes Catalog 1654763 Revised 6-06 www.tycoelectronics.com Jacknut Jacknut Socket Polarization Guide Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled N/A Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Kit: Shell & A-F Hardware Unassembled Kit: Shell & N-Z Hardware Unassembled Dimensions are shown for reference purposes only. Specifications subject to change. Plating Descriptive Part Number Tyco Electronics Part Number Nickel GPRB2PB3N GPRB2PB12N GPRB2PB13N GPRB2PB42N GPRB2PB43N GPRB2PD3N GPRB2PD12N GPRB2PD13N GPRB2PD42N GPRB2PD43N GPRB2PL3N GPRB2PL12N GPRB2PL13N GPRB2PL42N GPRB2PL43N GPRB2WB3N GPRB2WB12N GPRB2WB13N GPRB2WB42N GPRB2WB43N GPRB2WA3N GPRB2WA12N GPRB2WA13N GPRB2WA42N GPRB2WA43N GPRB2HB3N GPRB2HB22N GPRB2HB23N GPRB2HB52N GPRB2HB53N GPRB2HD3N GPRB2HD22N GPRB2HD23N GPRB2HD52N GPRB2HD53N -- GPRB2HL3N GPRB2HL22N GPRB2HL23N GPRB2HL52N GPRB2HL53N GPRB2LB3N GPRB2LB22N GPRB2LB23N GPRB2LB52N GPRB2LB53N GPRB2LD3N GPRB2LD22N GPRB2LD23N GPRB2LD52N GPRB2LD53N GPRB2LL3N GPRB2LL22N GPRB2LL23N GPRB2LL52N GPRB2LL53N GPRB2ZB3N GPRB2ZB22N GPRB2ZB23N GPRB2ZB52N GPRB2ZB53N GPRB2ZA3N GPRB2ZA22N GPRB2ZA23N GPRB2ZA52N GPRB2ZA53N 1738244-1 1738245-1 1738246-1 1738247-1 1738248-1 1738249-1 1738250-1 1738251-1 1738252-1 1738253-1 1738254-1 1738255-1 1738256-1 1738257-1 1738258-1 1738259-1 1738260-1 1738261-1 1738262-1 1738263-1 1738264-1 1738265-1 1738266-1 1738267-1 1738268-1 1738269-1 1738270-1 1738271-1 1738272-1 1738273-1 1738274-1 1738275-1 1738276-1 1738277-1 1738278-1 1877335-1 1738279-1 1738280-1 1738281-1 1738282-1 1738283-1 1738284-1 1738285-1 1738286-1 1738287-1 1738288-1 1738289-1 1738290-1 1738291-1 1738292-1 1738293-1 1738294-1 1738295-1 1738296-1 1738297-1 1738298-1 1738299-1 1738300-1 1738301-1 1738302-1 1738303-1 1738304-1 1738305-1 1738306-1 1738307-1 1738308-1 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 11 General Purpose Rectangular (GPR) Connectors GPRB2 (Horizontal) Shell Dimensions Plug Without Grounding Block GPRB2PB3N Receptacle Without Grounding Block GPRB2HD3N Receptacle With Grounding Block GPRB2ZA3N Plug With Grounding Block GPRB2WB3N Grounding Block A solution for High Intensity Radiated Electromagnetic Frequencies. The patented design provides a direct grounding to the shell. Panel Cut Out Modification Code D and L M39029/1-101 contacts Panel Cut Out Modification Code A Note 1: Maximum dimension for inserts with grommets (Part Number GPRBE and GPRBH) 12 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors GPRB2 Vertical (Square) Shell and Strain Relief Dimensions 10.65 min. (0.419 min.) Shell Kits with Two Cavities for Key-A Inserts (1.627.004) 13.20 ref. (0.520 ref.) 3.10 (0.122) GROUNDING SPRING 11.15 ref. (0.439 ref.) 5.20 (0.205) Shell & A-F hardware unassembled 2Assembly: Hardware assembled in polarization position E 34.680.25 (1.365.009) 1Kit: SHELL 25.50 max. (1.004 max.) 11.15 ref. (0.439 ref.) SHELL 34.30 max. (1.350 max.) INSERT RETENTION CLIP 50.20 max. (1.976 max.) 49.00 max. (1.929 max.) 55.30 max. (2.177 max.) 49.450.25 (1.947.009) 49.00 max. (1.929 max.) 4 x 15.00 (0.591) 4x 34.20 max. (1.346 max.) INSERT RETENTION CLIP Plug Shell, Vertical GPRB2 1877719-11 1811646-12 Shell Kits with Two Cavities for Key-A and Key-B Inserts 1Kit: 11.65 ref. (0.459 ref.) Receptacle Shell, Vertical GPRB2 1877720-11 1811648-12 10.65 min. (0.419 min.) 20.66 (0.813) Recommended Panel Cutout 14.20 ref. (0.559 ref.) 34.680.25 (1.365.009) 13.20 ref. (0.520 ref.) 11.05 ref. (0.435 ref.) Shell & A-F hardware unassembled 5.20 max. (0.205 max.) 11.15 ref. (0.439 ref.) 1.50 ref. (0.059 ref.) INSERT RETENTION CLIP 49.450.25 (1.947.009) 2x 4 x 15.00 (0.591) 18.70 max. (0.736 max.) 4x 2x INSERT RETENTION CLIP Plug Shell Kit, Vertical with A-F Jackscrew GPRB2 1811892-11 Strain Relief Kit, Vertical GPRB2 19.00 max. (0.748 max.) 2x 33.60 max. (1.323 max.) Receptacle Shell Kit, Vertical, Rear Panel Mount, with A-F Jackscrew GPRB2 1811894-11 21.00 (0.827) Recommended Panel Cutout 16.00 (0.630) 48.45 (1.907) 33.40 (1.315) 20.00 (0.787) 36.00 (1.417) 5.00 (0.197) 1811650-1 13 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Insert Descriptive Part Number Format Descriptive Part Numbering System GPRA E Use this guide to construct descriptive part numbers for GPRA & B inserts. Refer to pages 15-18 for the corresponding Tyco Electronics Part Number. 20 P A 40 P B GPRA Series Inserts for GPRA1 shells (see note 1 and 3) Class E -- Environmental with rear grommet and interfacial seal for pin inserts Environmental with rear grommet for socket inserts N -- Non environmental (no rear grommet, no interfacial seal) H -- Inserts for pin contacts with a rear grommet and without interfacial seal Contact arrangement 00 - 1C1 - 04 - 09 - 14 - 14M - 17 - 20 - F5 Contact Type P -- Pin S -- Socket Insert Keying A keying only GPRB E GPRB Series Inserts for GPRB1 and GPRB2 shells (see note 1 and 3) Class E -- Environmental with rear grommet and interfacial seal for pin inserts Environmental with rear grommet for socket inserts N -- Non environmental (no rear grommet, no interfacial seal) H -- Inserts for pin contacts with a rear grommet and without interfacial seal Contact arrangement 00 - C3 - 06 - 13C1 - 14 - 17 - 20C1 - 22 - 28 - 30 - 34 - 40 25Q1 - 10Q2 - 3Q3 - F12 - MEB2 Contact Type P -- Pin S -- Socket Insert Keying A -- Insert with keying A (see note 2) B -- Insert with keying B (see note 2) Notes: 1. Inserts are designed for rear release contacts. 2. For GPRB2 shells, use one insert keyed A and one insert keyed B. For GPRB1 shells, use one insert keyed A only. 3. Pin and socket inserts can be installed in either plug or receptacle shell. 14 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Insert Descriptive Part Number Format (Continued) GPRA Insert Part Numbers Series Contact Arrangement Contact Type 00 N/A Classification Keying Dummy Insert N/A Environmental, with Rear Grommet & Interfacial Seal Pin 1C1 Socket Pin 04 Socket Pin 09 Socket Pin A 14 Pin 14M Socket Pin 17 Socket Pin 20 Socket F5 LuxCis(R) Termini Tyco Electronics Part Number GPRAN00 1738049-1 GPRAE1C1PA 1738050-1 Insert with Rear Grommet, without Interfacial Seal GPRAH1C1PA 1738051-1 Non-environmental (no Grommet or Seal) GPRAN1C1PA 1738052-1 Environmental, with Rear Grommet GPRAE1C1SA 1738053-1 Non-environmental (no Grommet or Seal) GPRAN1C1SA 1738054-1 Environmental, with Rear Grommet & Interfacial Seal GPRAE04PA 1738055-1 Insert with Rear Grommet, without Interfacial Seal GPRAH04PA 1738056-1 Non-environmental (no Grommet or Seal) GPRAN04PA 1738057-1 Environmental, with Rear Grommet GPRAE04SA 1738058-1 Non-environmental (no Grommet or Seal) GPRAN04SA 1738059-1 Environmental, with Rear Grommet & Interfacial Seal GPRAE09PA 1738060-1 Insert with Rear Grommet, without Interfacial Seal GPRAH09PA 1738061-1 Non-environmental (no Grommet or Seal) GPRAN09PA 1738062-1 Environmental, with Rear Grommet GPRAE09SA 1738063-1 Non-environmental (no Grommet or Seal) GPRAN09SA 1738064-1 Environmental, with Rear Grommet & Interfacial Seal GPRAE14PA 1738065-1 Insert with Rear Grommet, without Interfacial Seal GPRAH14PA 1738066-1 GPRAN14PA 1738067-1 Non-environmental (no Grommet or Seal) Socket Descriptive Part Number A Environmental, with Rear Grommet GPRAE14SA 1738068-1 Non-environmental (no Grommet or Seal) GPRAN14SA 1738069-1 Environmental, with Rear Grommet & Interfacial Seal GPRAE14MPA 1738070-1 Insert with Rear Grommet, without Interfacial Seal GPRAH14MPA 1738071-1 Non-environmental (no Grommet or Seal) GPRAN14MPA 1738072-1 Environmental, with Rear Grommet GPRAE14MSA 1738073-1 Non-environmental (no Grommet or Seal) GPRAN14MSA 1738074-1 Environmental, with Rear Grommet & Interfacial Seal GPRAE17PA 1738075-1 Insert with Rear Grommet, without Interfacial Seal GPRAH17PA 1738076-1 Non-environmental (no Grommet or Seal) GPRAN17PA 1738077-1 Environmental, with Rear Grommet GPRAE17SA 1738078-1 Non-environmental (no Grommet or Seal) GPRAN17SA 1738079-1 Environmental, with Rear Grommet & Interfacial Seal GPRAE20PA 1738080-1 Insert with Rear Grommet, without Interfacial Seal GPRAH20PA 1738081-1 Non-environmental (no Grommet or Seal) GPRAN20PA 1738082-1 Environmental, with Rear Grommet GPRAE20SA 1738083-1 Non-environmental (no Grommet or Seal) GPRAN20SA 1738084-1 Environmental, without Sleeve Holder GPRAEF5PA 1954043-1 Environmental, with Sleeve Holder GPRAEF5SA 1954044-1 LuxCis is a trademark of Radiall S.A. Product is manufactured under license from Radiall S.A. 15 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Insert Descriptive Part Number Format (Continued) GPRB Insert Part Numbers Series Contact Arrangement 00 Contact Type N/A Classification Keying Dummy Insert Environmental, with Rear Grommet & Interfacial Seal Pin C3 Insert with Rear Grommet, without Interfacial Seal Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet Socket Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet & Interfacial Seal Pin 06 Insert with Rear Grommet, without Interfacial Seal Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet Socket Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet & Interfacial Seal Pin B 13C1 Insert with Rear Grommet, without Interfacial Seal Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet Socket Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet & Interfacial Seal Pin 14 Insert with Rear Grommet, without Interfacial Seal Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet Socket Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet & Interfacial Seal Pin 17 Insert with Rear Grommet, without Interfacial Seal Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet Socket Non-environmental (no Grommet or Seal) N/A A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B Descriptive Part Number GPRBN00 GPRBEC3PA GPRBEC3PB GPRBHC3PA GPRBHC3PB GPRBNC3PA GPRBNC3PB GPRBEC3SA GPRBEC3SB GPRBNC3SA GPRBNC3SB GPRBE06PA GPRBE06PB GPRBH06PA GPRBH06PB GPRBN06PA GPRBN06PB GPRBE06SA GPRBE06SB GPRBN06SA GPRBN06SB GPRBE13C1PA GPRBE13C1PB GPRBH13C1PA GPRBH13C1PB GPRBN13C1PA GPRBN13C1PB GPRBE13C1SA GPRBE13C1SB GPRBN13C1SA GPRBN13C1SB GPRBE14PA GPRBE14PB GPRBH14PA GPRBH14PB GPRBN14PA GPRBN14PB GPRBE14SA GPRBE14SB GPRBN14SA GPRBN14SB GPRBE17PA GPRBE17PB GPRBH17PA GPRBH17PB GPRBN17PA GPRBN17PB GPRBE17SA GPRBE17SB GPRBN17SA GPRBN17SB Tyco Electronics Part Number 1738085-1 1738086-1 1738091-1 1738087-1 1738092-1 1738088-1 1738093-1 1738089-1 1738094-1 1738090-1 1738095-1 1738096-1 1738101-1 1738097-1 1738102-1 1738098-1 1738103-1 1738099-1 1738104-1 1738100-1 1738105-1 1738106-1 1738111-1 1738107-1 1738112-1 1738108-1 1738113-1 1738109-1 1738114-1 1738110-1 1738115-1 1738116-1 1738121-1 1738117-1 1738122-1 1738118-1 1738123-1 1738119-1 1738124-1 1738120-1 1738125-1 1738126-1 1738131-1 1738127-1 1738132-1 1738128-1 1738133-1 1738129-1 1738134-1 1738130-1 1738135-1 16 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Insert Descriptive Part Number Format (Continued) GPRB Insert Part Numbers (Continued) Series Contact Arrangement Contact Type Classification Keying Environmental, with Rear Grommet & Interfacial Seal Pin 20C1 Insert with Rear Grommet, without Interfacial Seal Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet Socket Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet & Interfacial Seal Pin 22 Insert with Rear Grommet, without Interfacial Seal Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet Socket Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet & Interfacial Seal Pin 28 Insert with Rear Grommet, without Interfacial Seal Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet Socket Non-environmental (no Grommet or Seal) B Environmental, with Rear Grommet & Interfacial Seal Pin 30 Insert with Rear Grommet, without Interfacial Seal Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet Socket Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet & Interfacial Seal Pin 34 Insert with Rear Grommet, without Interfacial Seal Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet Socket Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet & Interfacial Seal Pin 40 Insert with Rear Grommet, without Interfacial Seal Non-environmental (no Grommet or Seal) Environmental, with Rear Grommet Socket Non-environmental (no Grommet or Seal) A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B Descriptive Part Number GPRBE20C1PA GPRBE20C1PB GPRBH20C1PA GPRBH20C1PB GPRBN20C1PA GPRBN20C1PB GPRBE20C1SA GPRBE20C1SB GPRBN20C1SA GPRBN20C1SB GPRBE22PA GPRBE22PB GPRBH22PA GPRBH22PB GPRBN22PA GPRBN22PB GPRBE22SA GPRBE22SB GPRBN22SA GPRBN22SB GPRBE28PA GPRBE28PB GPRBH28PA GPRBH28PB GPRBN28PA GPRBN28PB GPRBE28SA GPRBE28SB GPRBN28SA GPRBN28SB GPRBE30PA GPRBE30PB GPRBH30PA GPRBH30PB GPRBN30PA GPRBN30PB GPRBE30SA GPRBE30SB GPRBN30SA GPRBN30SB GPRBE34PA GPRBE34PB GPRBH34PA GPRBH34PB GPRBN34PA GPRBN34PB GPRBE34SA GPRBE34SB GPRBN34SA GPRBN34SB GPRBE40PA GPRBE40PB GPRBH40PA GPRBH40PB GPRBN40PA GPRBN40PB GPRBE40SA GPRBE40SB GPRBN40SA GPRBN40SB Tyco Electronics Part Number 1738136-1 1738141-1 1738137-1 1738142-1 1738138-1 1738143-1 1738139-1 1738144-1 1738140-1 1738145-1 1738146-1 1738151-1 1738147-1 1738152-1 1738148-1 1738153-1 1738149-1 1738154-1 1738150-1 1738155-1 1738156-1 1738161-1 1738157-1 1738162-1 1738158-1 1738163-1 1738159-1 1738164-1 1738160-1 1738165-1 1738166-1 1738171-1 1738167-1 1738172-1 1738168-1 1738173-1 1738169-1 1738174-1 1738170-1 1738175-1 1738176-1 1738181-1 1738177-1 1738182-1 1738178-1 1738183-1 1738179-1 1738184-1 1738180-1 1738185-1 1738186-1 1738191-1 1738187-1 1738192-1 1738188-1 1738193-1 1738189-1 1738194-1 1738190-1 1738195-1 17 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Insert Descriptive Part Number Format (Continued) GPRB Insert Part Numbers (Continued) Series Contact Arrangement 25Q1 Contact Type Classification Pin Environmental, with Rear Grommet & Interfacial Seal Socket Pin 10Q2 Keying A GPRBE25Q1PA 1811121-1 GPRBE25Q1PB 1877567-1 A GPRBE25Q1SA 1811122-1 B GPRBE25Q1SB 1877568-1 A GPRBE10Q2PA 1877702-1 B GPRBE10Q2PB 1877706-1 A GPRBE10Q2SA 1877704-1 B GPRBE10Q2SB 1877708-1 Non-environmental (no Grommet or Seal) A GPRBN10Q2SA 1954067-1 Environmental, with Rear Grommet & Interfacial Seal A GPRBE3Q3PA 1877694-1 Environmental, with Rear Grommet A GPRBE3Q3SA 1877696-1 A GPRBEF12PA 1738805-1 B GPRBEF12PB 1738806-1 A GPRBEF12SA 1738807-1 Environmental, with Rear Grommet Environmental, with Rear Grommet & Interfacial Seal Environmental, with Rear Grommet Pin 3Q3 Socket Environmental, without Sleeve Holder LuxCis Termini F12 M2 Environmental, with Sleeve Holder Mini-Expanded Beam Tyco Electronics Part Number B Socket B Descriptive Part Number B GPRBE2F12SB 1738808-1 Spring-loaded Half A GPRBEM2PA 1445162-1 Fixed Half A GPRBEM2SA 1445163-1 18 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Insert Arrangements GPRA Inserts1 00 Dummy Insert 1C1 1 x Size 5 Contacts 04 2 x Size 15 or 16 Contacts 2 x Size 12 Contacts 09 3 x Size 20 Contacts 6 x Size 15 or 16 Contacts 14 14 x Size 20 Contacts 14M 8 x Size 22 Contacts 3 x Size 20 Contacts 3 x Size 15 or 16 Contacts 17 12 x Size 22 Contacts 5 x Size 20 Contacts 20 20 x Size 22 Contacts 00 Dummy Insert C3 3 x Size 5 Contacts 06 6 x Size 12 Contacts 13C1 2 x Size 12 Contacts 4 x Size 15 or 16 Contacts 6 x Size 20 Contacts 1 x Size 5 Contacts 14 14 x Size 15 or 16 Contacts 17 14 x Size 20 Contacts 3 x Size 12 Contacts 20C1 19 x Size 20 Contacts 1 x Size 5 Contacts 22 16 x Size 20 Contacts 6 x Size 15 or 16 Contacts 28 22 x Size 22 Contacts 6 x Size 15 or 16 Contacts 30 30 x Size 20 Contacts 34 18 x Size 22 Contacts 16 x Size 20 Contacts 40 40 x Size 22 Contacts GPRB Inserts1, 2 GPRBN00 Keying: A 25QI3 10Q23 B 3Q33 Note 1 Pin inserts: Mating faces shown above. 2 In a GPRB2 shell, one insert must be "A" keyed and the other one must be "B" keyed (See at right). 3 Size 8 cavity applicable for use with ARINC 600 Quadrax or Twinax contacts. 19 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Insert Assemblies for High Speed Applications F12 LuxCis(R) Insert Assemblies MATING FACE 12.05 (0.474) 12.01 (0.473) 27.00 (1.063) 26.96 (1.061) INTERFACIAL SEAL FRONT HOUSING 29.95 (1.179) 29.15 (1.148) REAR HOUSING Product Facts REAR GROMMET ARINC 801 approved Optical termini for use with GPR, ARINC 600, circular MIL-DTL-38999 connectors. Industry Standard 1.25mm ceramic ferrule Compatible with 1.5-2.2mm tight jacket and loose tube cable construction: MT - Tight jacket cable ML - Loose tube cable SingleMode (SM) and MultiMode (MM) versions LuxCis(R) termini part numbers: 1828199-1 MM/ML Version 1828200-1 MM/MT Version 1918614-1 SM/ML Version 1918616-1 SM/ML VersionAPC 1918615-1 SM/MT Version 1918617-1 SM/MT Version APC REAR FACE Insert Assembly, without Sleeve Holder, Environmental, F12 Key A 1738805-1 Key B 1738806-1 MATING FACE 12.05 (0.474) 12.01 (0.473) 27.00 (1.063) 26.96 (1.061) INTERFACIAL SEAL SLEEVE HOLDER FRONT HOUSING 36.53 (1.438) 35.63 (1.403) REAR HOUSING REAR GROMMET Materials: Housings - Nickel Plated Copper Ferrule - Zirconia Spring - Stainless Steel Crimp Sleeve - Nickel Plated Copper Protective Cover - Silicone REAR FACE Insert Assembly, with Sleeve Holder, Environmental, F12, Key A GPRB Key A 1738807-1 Key B 1738808-1 Optical Performance Single mode, 1310nm/1550nm (UPC) Attenuation, Mean - 0.15dB Return Loss - >50dB Multimode, 850nm.1310nm Attenuation, Mean - 0.10dB Return Loss - >20dB Assembly Capabilities Tyco Electronics has extensive Rugged Optic Harness capabilities. Please consult your local Tyco Electronics Sales Representative for assistance. LuxCis(R) Optical Termini Part Numbers Cable Dia. 0.9mm Buffer 1.5 - 2.2mm 1.5 - 2.2mm Cable Structure ML (loose & tight) MT (ultra tight) -- ML MT S/M Fiber 125,3 m PC/UPC * 1918614-1 1918615-1 Consult your local Tyco Electronics Sales Representative for additional options. * Contact Tyco Electronics for availability. S/M Fiber 125,3 m APC * 1918616-1 1918617-1 M/M Fiber 128 m PC * 1828199-1 1828200-1 LuxCis is a trademark of Radiall, S.A. Product is manufactured under license from Radiall S.A. 20 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Insert Assemblies for High Speed Applications (Continued) M2 Mini-Expanded Beam Insert Holders Product Facts No wear on fiber optic inter- face; Very vibration resistant Easy to handle, easy to clean. Durable connection that is highly resistant to dirt/debris. Singlemode or multimode Common 850/1300 Dual Wavelength, 1310, or 1550 nm wavelengths Easy alignment for low-loss repeatable performance Consistent overall optical "link budget" assured Low sensitivity to thermal fluctuations and interface contamination Repeatable low-loss performance in harsh environments. Expanded Beam Products Ball lens expands cross-sec- tional area of light over 200 times for multimode and over 2000 times for singlemode Rugged hermaphroditic construction (i.e., same insert mates to each other) Physically non-contacting mating conditions; no wear, installed fiber ferrule protected by ball lens PRO BEAM Mini Connector field deployable interconnects Insert/holder blocks designed for Mini-Expanded Beam Common insert for 1- through 4-channels Unique Modular Design, for use with multimode and singlemode fiber. Cable assembly and termination services Expanded Beam Insert Mini-Expanded Beam insert for multi-channel small form factor - the smallest expanded beam multi-channel insert in the industry a Tyco Electronics exclusive. Expanded Beam Principle Fiber Optic interconnect/ cable system using Expanded Beam technology, which physically expands and collimates the transmission signal into an optical beam over 14 times its original diameter (the cross sectional area of the light beam increases over 200 times for multimode optical signals). For singlemode signals, the collimated beam is over 45 times its original diameter (the cross- Expanded Beam Inserts sectional area of the light beam increases over 2,000 times). It is then refocused back down onto the core of the receiving fiber. This approach provides ease of alignment and low sensitivity to thermal changes and contamination. High strength, precision connector housings enhance a durable connection, optimizing low loss and repeatable performance. Suitable for aerospace, avionics, field-deployable communications, marine ship-to-shore applications, security systems, mobile diagnostic units, oil and gas exploration and other harsh environment applications demanding strength, durability and reliable performance in conditions of multiple couplings/decouplings, blindmate situations, and high vibration. COMPRESSION SPRINGS FRONT HOLDER BLOCK 13.51 max. (0.532 max.) K RETAINER BLOCK 12.05 (0.474) 12.01 (0.473) K 27.00 (1.063) 26.96 (1.061) SECTION 17.44 max. (0.687 max.) 12.87 max. (0.507 max.) 4-40 MACHINE SCREW K-K Holder Kit, Pin (Spring-Loaded), Mini-Expanded Beam, Key A GPRB 1445162-1 HOLD DOWN PLATE FRONT HOLDER BLOCK K 13.51 max. (0.532 max.) 12.05 (0.474) 12.01 (0.473) 27.00 (1.063) 26.96 (1.061) SECTION 19.48 max. (0.767 max.) K 4.49 max. (0.177 max.) 4-40 MACHINE SCREWS K-K Assembly Capabilities Tyco Electronics has extensive Rugged Optic Harness capabilities. Please consult your local Tyco Electronics Sales Representative for assistance. Holder Kit, Socket (Fixed), Mini-Expanded Beam, Key A GPRB 1445163-1 21 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Contact and Application Tool Part Numbers Form Contact Size Wire Size 22 22 - 24 - 26 22 - Reduced Crimp Barrel 28 - 30 20 20 - 22 - 24 16 16 - 18 - 20 Contacts Tyco PN Type Pin 1738007-1 Socket 1738008-1 Pin 1738009-1 Socket 1738010-1 Pin 1738011-1 Socket 1738012-1 Pin 1738013-1 Socket 1738014-1 Pin 16 - Reduced 20 - 22 - 24 Crimp Barrel Socket 1738015-1 Crimp Contacts 12 12 - 14 5 8 - 10 1738016-1 Pin 1738017-1 Socket 1738018-1 Pin 1738019-1 Socket 1738020-1 Ground 16 -Mating End 20 - 22 - 24 Block 2-592404-1 20-Crimp Barrel Contact M39029/1-101 Form Contacts Tyco PN Contact Size Wire Size Type RG142 RG223 KX23 Pin 1738021-1 5 Socket 1738022-1 Pin 1738023-1 Socket 1738024-1 RG174 Pin RG179 RG316 - KX22 Socket 1738026-1 RG174 RG316 KX22 5 Coaxial Crimp Contacts 15 RG178 KX21 ST 15 15 KX21 DT 15 UT .047 5 PAN61421 M17/176-0002 Concentric Twinax Crimp Contacts Form Contact Size Contact Insertion/Extraction Tools Contact Crimp Tools & Positioners Crimp Tool Tyco P/N Crimp Tool MIL P/N Positioner Tyco P/N Positioner MIL P/N 601966-8 M22520/2-23 601966-5 M22520/2-08 Tyco Part Number 0- 601966-1 601967-1 M22520/1-01 601967-2 M81969/1-02 91066-3 M81969/1-03 1738327-1 M81969/28-02 M81969/28-01 M22520/1-02 N/A M22520/23-01 & M22520/23-02 Locator 1738331-1 N/A 1811509-1 601966-1 M22520/2-01 N/A M22520/2-02 or /2-11 592105-1 Center Conductor / Contact Crimp Tools & Positioners Crimp Tool Tyco P/N Crimp Tool MIL P/N M81969/14-11 or /14-02 Outer Conductor Crimp Tools & Die Sets Positioner Tyco P/N Positioner MIL P/N Crimp Tool Tyco P/N 1738332-1 N/A 608650-1 M22520/5-01 1738336-1 M22520/5-05 Pin 1738027-1 Socket 1738028-1 Pin 1738029-1 Socket 1738030-1 Pin 1738031-1 Socket 1738032-1 Pin 1738033-1 Socket 1738034-1 601966-1 Crimp Tool MIL P/N Die Set Tyco P/N Die Set MIL P/N 1738333-1 N/A 601963-1 M22520/4-01 1738337-1 608650-1 1738338-1 N/A 608650-1 M22520/5-01 1738336-1 M22520/5-05 Hex Crimp Number M22520/2-01 M22520/5-01 Reference Cables Type Tensolite NF24Q100, NF26Q100, 24443/03130X-4 (LD), 2443/P025X-4 (LD), Raychem CEC-RWC-18687, CEC-RWC-18664 Pin 1445692-1 Socket 1445693-1 DRAKA F4703-3, F4704-4 -- Pin 1445692-6 Socket 1445693-6 Pin 1877039-1 Socket 1877040-1 -- Seal Assembly 1877626-1 Raychem 100 Twinax 0024T1426 Pin 1811865-1 Socket Seal Assembly 1811866-1 1954046-1 PC Tail Contacts N/A Contacts Tyco PN Tensolite 26473/02006X-4 (LD), Raychem CEC-RWC-18684, CEC-RWC-18680 -- Inserts pre-assembled with PC tail contacts with straight or right-angle termination are available -- Consult Tyco Electronics. 91067-2 0- 0- 8 8 M81969/1-01 1738025-1 0.231 Non-Concentric TWINAX Contacts 91066-1 M22520/2-01 0.218 ARINC 600 QUADRAX Contacts MIL Part Number Contact Insertion/Extraction Tools Contact Size Type Configuration Tyco Part Number 22 Pin Straight 1738709-1 20 Pin Straight 1738710-1 0-91067-2 M81969/1-02 12 Pin Straight 1738711-1 1738327-1 M81969/28-02 Tyco Part Number 0-91066-1 MIL Part Number M81969/1-01 22 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Contact and Application Tool Part Numbers (Continued) LuxCis(R) Optical Termini Part Numbers Cable Structure ML (loose & tight) MT (ultra tight) -- ML MT Cable Dia. 0.9mm Buffer 1.5 - 2.2mm 1.5 - 2.2mm S/M Fiber 125,3 m PC/UPC * 1918614-1 1918615-1 S/M Fiber 125,3 m APC * 1918616-1 1918617-1 M/M Fiber 128 m PC * 1828199-1 1828200-1 Consult your local Tyco Electronics Sales Representative for additional options. * Contact Tyco Electronics for availability. Spare Parts and Tools GPRA and GPRB Series Spare Parts Grounding Spring Part Number 1738199-1 Tools Part Number 1738199-1 1738200-1 1738201-1 1738203-1 1738204-1 1738205-1 1738206-1 1738207-1 1738208-1 1738209-1 1738210-1 1738213-1 1738214-1 1738211-1 1738212-1 1877328-1 1877329-1 1738400-1 1738428-1 1738429-1 1738440-1 Description Grounding Spring Dust Cap - Plug Shell Dust Cap - Receptacle Shell Jacknut - A/B/C/D/E/F Jacknut - N/R/W/X/Y/Z Jackscrew - A/B/C/D/E/F Jackscrew - N/R/W/X/Y/Z Socket Polarization Guide - A/B/C/D/E/F Socket Polarization Guide - N/R/W/X/Y/Z Pin Polarization Guide - A/B/C/D/E/F Pin Polarization Guide - N/R/W/X/Y/Z Dust Cap - Plug Shell Dust Cap - Receptacle Shell Dust Cap - Plug Shell Dust Cap - Receptacle Shell Anti-Static Dust Cap - Plug Shell Anti-Static Dust Cap - Receptacle Shell Grounding Spring Polarization Key, Male Polarization Key, Female Key Retention Plate Assembly To Be Used With GPRA GPRA GPRA GPRB2 GPRB2 GPRB2 GPRB2 GPRB2 Rack & Panel application GPRB2 Rack & Panel application GPRB2 Rack & Panel application GPRB2 Rack & Panel application GPRB1 GPRB1 GPRB2 GPRB2 GPRB2 GPRB2 GPRB1 & B2 GPRA & GPRB1 GPRA & GPRB1 GPRA & GPRB1 Description Insert extraction tool Allen wrench locking system Insert handling case Insert extraction tool Right-angle insert extraction tool Spigot wrench for locking device w/1/4 inch adapter Spigot wrench for locking device w/handle To Be Used With GPRA GPRA, GPRB1 GPRA, GPRB1 & B2 GPRB1 & B2 GPRB1 & B2 GPRB2 GPRB2 GPRA and GPRB Series Part Number 1738215-1 1738216-1 1738217-1 1738218-1 1738219-1 1738220-1 1738221-1 LuxCis is a trademark of Radiall, S.A. Product is manufactured under license from Radiall S.A. Insert Handling Case Part Number 1738217-1 Spigot Wrench for Locking Device with Handle Part Number 1738221-1 Right-Angle Insert Extraction Tool Part Number 1738219-1 Insert Extraction Tool Part Number 1738218-1 Stainless steel testing tools are available to check the wiring of the inserts without the shell -- Consult Tyco Electronics. 23 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors EMI Backshells and Strain Reliefs GPRB Series Part Number 1738310-1 1738311-1 1738312-1 1738313-1 1738314-1 1738315-1 1738316-1 1811650-1 1877338-1 Description Straight strain relief 45 strain relief Straight backshell Straight strain relief Backshell for shielded termination Backshell for screened twisted-pair cables Backshell for large sized wire harnesses Straight Strain Relief 90 Exit Backshell Used With GPRB1 GPRB1 GPRB1 GPRB2 GPRB2 GPRB2 GPRB2 GPRB2-Vertical GPRB2 GPRA Series Part Number 1738317-1 1738318-1 1738319-1 Backshell Kit, 90 Exit Part Number 1877338-1 Description Straight strain relief 45 strain relief Straight backshell Straight Backshell Part Number 1738312-1 Backshell for Shielded Termination Part Number 1738314-1 Straight Strain Relief Part Number 1738310-1 Straight Backshell Part Number 1738319-1 Backshell for Screened Twisted Pair Cables Part Number 1738315-1 45 Strain Relief Part Number 1738318-1 Straight Strain Relief Part Number 1738313-1 Backshell for Large Sized Wire Harnesses Part Number 1738316-1 GPRB2 Vertical Strain Relief Part Number 1811650-1 Locking Nut (1) Shroud (1) Vertical Strain Relief Kit, Fiber Optic Part Number 1877736-1 Shroud (1) Locking Nut (1) Horizontal Strain Relief Kit, Fiber Optic Part Number 1877888-1 24 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Galley Insert (GAIN) Connectors 75.90 Max. (2.988 Max.) 16.700.15 (0.657.006) 18.90 Max. (0.744 Max.) 7.70 (0.303) 96.60 Max. (3.803 Max.) 5.050.10 (0.199.004) 88.00 Max. (3.464 Max.) Receptacle Shell, Front Panel Mount, with Guide Socket GPRB2 1811119-1 76.2 min. (3.00 min.) 19.2 min. (0.75 min.) Product Facts Designed for ARINC 810 - standard interfaces for Galley Insert (GAIN) Equipment Spring-Loaded, floatmounting plug shell design allows 1mm variation in the mating direction Blind mating guide pin & socket accept 2mm/ 2 lateral misalignment Product incorporates: size 22 signal contacts size 12 power contacts size 8 twinax contacts 500 mating cycles durability 2x 44 (1.73) Recommended Panel Cutout 74.50 max. (2.933 max.) 10.80 min. (0.425 min.) 19.10 max. (0.752 max.) 18.000.05 (0.709.002) 110.20 max. (4.339 max.) 25.00 max. (0.984 max.) 8.00 max. (0.315 max.) Plug Shell, Spring-Loaded, Float-Mounting GPRB2 1877070-1 79.00 min. (3.110 min.) 20.00 min. (0.787 min.) 2x 46.75 (1.840) Recommended Panel Cutout Description Fully Assembled Receptacle Fully Assembled Plug Receptacle Shell Assembly Plug Shell Assembly 25Q1 Pin Insert Assembly 25Q1 Socket Insert Assembly 06 Pin Insert Assembly 06 Socket Insert Assembly Size 22 Pin Contact Size 22 Socket Contact Size 12 Pin Contact Size 12 Socket Contact Size 8 Twinax Pin Contact Size 8 Twinax Socket Contact Size 22 Sealing Plug Strain Relief (Straight) Dust Cap, Plug Dust Cap, Receptacle Seal Assembly, Size 8, GPR 100 Twinax Raychem Cable Part Number 1877652-1 1877646-1 1811119-1 1877070-1 1811121-1 1811122-1 1738101-1 1738104-1 1738007-1 1738008-1 1738017-1 1738018-1 1811865-1,-2 1811866-1,-2 592104-4 1738313-1 1738211-1 1738212-1 1954046-1 0024T1426 Ref. Catalog Page -- -- 25 25 18 18 16 16 22 22 22 22 22 22 -- 24 23 23 22 22 25 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 General Purpose Rectangular (GPR) Connectors Custom Solutions and In Development Products The GPRA & B Connector Series offers a comprehensive range of standard components that allows the user to build a connector to meet his requirements. However, standard shells might not be compatible with the user's application; alternate solutions are available to meet the customer's specific requirements with limited investment by using standard inserts and contacts. Some of these are shown below. Multicavity Racked Shells Solution for IMA (Integrated Modular Avionics) GPRB shells can be built in any format from 4 to 20 cavities for either panel or rack applications and with or without grounding blocks. These shells accommodate standard inserts. A right-angle contact printed circuit board connector which allows direct mating with an airframe connector has been developed. It is fitted with special rack features: spring loaded shell, EMI shield frame and 4 polarization posts with 256 combinations. Cabinet Housing LRM (Line Replaceable Module) Composite Shells (in development) Low weight, Skydrol(R) resistant composite shells have been developed. Spring Loaded Airframe Connector EMI Shielded PCB Right-Angle Connector Solutions for Data Bus Tyco Electronics is at the leading edge of providing solutions for high-speed data transmission such as size 8 quadrax contacts for Ethernet. Connectors for Size 3 Coaxial Contacts A high-reliability design for high specification RF requirements. Solutions for Wiring Inserts may be fitted with internal bussed bars. This solution replaces junction blocks and simplifies the connector cabling. Custom Shells This custom 4-cavity receptacle shell was developed and serves as the rear panel of the customer's enclosure. Custom Inserts Inserts are available with PC Tail contacts pre-assembled, such as this 40-position pin assembly. 26 Catalog 1654763 Revised 6-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are inch equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Global Contacts Americas Argentina - Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 Brasil - Sao Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Canada - Toronto Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: (Technical Support) Phone: +905-470-4425 Fax: +905-474-5525 Colombia - Bogota Phone: +57-1-231-9398 Fax: +57-1-660-0206 Mexico - Mexico City Phone: +52-55-1106-0800 Fax: +52-5-361-8545 United States - Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 Product Information Center: (Technical Support) Phone: +800-522-6752 Fax: +717-986-7575 For Latin/South American Countries not shown Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 Asia/ Pacific Australia - Sydney Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Product Information Center: (Technical Support) Phone: +61-2-9840-8200 Fax: +61-2-9634-6188 India - Bangalore Phone: +91-80-285-40800 Fax: +91-80-285-40820 Indonesia - Jakarta Phone: +65-6482-0311 Fax: +65-6482-1012 Japan - Toyko Phone: +81-44-844-8111 Fax: +81-44-812-3207 Raychem & Identification Products Phone: +81-44-844-8183 Fax: +81-44-844-8184 Product Information Center: (Technical Support) Phone: +81-44-844-8013 Fax: +81-44-812-3200 Korea - Seoul Phone: +82-2-3415-4500 Fax: +82-2-3486-3810 Malaysia - Kuala Lumpur Phone: +60-3-78053055 Fax: +60-3-78053066 New Zealand - Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Philippines - Makati City Phone: +632-848-0171 Fax: +632-867-8661 People's Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: Fax: +86-21-64857333/64850602 +86-21-64856222/54261090 Singapore - Singapore Phone: +65-6482-0311 Fax: +65-6482-1012 Raychem Products Phone: +65-4866-151 Fax: +65-6545-514 Identification Products Phone: +65 (0) 6482-0311 Fax: +65 (0) 6481-5514 Taiwan - Taipei Phone: +886-2-8768-2788 Fax: +886-2-8768-2268 Thailand - Bangkok Phone: +66-2-955-0500 Fax: +66-2-955-0505 Vietnam and Indochina - Ho Chi Minh City Phone: +84-8 930-5546 Fax: +84-8 930-3443 Europe/ Middle East/Africa Austria - Vienna Phone: +43-1 90 5 60-0 Fax: +43-1 90 5 60-1333 Germany - Speyer Phone: +49-6232-30-0 Fax: +49-6232-30-2243 Belgium - Kessel-Lo Phone: +32-16-35-23-00 Fax: +32-16-35-23-52 Germany - HTS Division - Neunkirchen Phone: +49-2247-305-0 Fax: +49-2247-305-122 Bulgaria - Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Great Britain - Stanmore Middlesex Phone: +44-8706-080-208 Fax: +44-1793-572-109 Product Information Center: (Technical Support) Freephone GB: 0800-267-666 Phone: +44-208-420-8341 or 8343 +44-208-420-8081 Czech Republic - Kurim Phone: +420-5-41-162-111 Fax: +420-5-41-162-223 Denmark - Glostrup Phone: +45-43-480-452 Fax: +45-43-441-414 Egypt - Cairo Phone: +20-2-29 04 281 Fax: +20-2-41 92 334 Finland - Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 France - Cergy-Pontoise Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: (Technical Support) Phone: +33-1-3420-8943 Fax: +33-1-3420-8623 Germany - Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: (Technical Support) Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Germany - Langen Phone: +49-6103-709-0 Fax: +49-6103-709-1223 1654763-1.5M-SK/GIC-FP-6-06 Printed in the U.S.A. Great Britain - Raychem & Identification Products Phone: +44-1793-528171 Fax: +44-1793-572-516 Greece - Athens Phone: +30-1-9370-396/397 Fax: +30-1-9370-655 Hungary - Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Ireland - Dublin Phone: +353-1-820-3000 Fax: +353-1-820-9790 Israel - Yokneam Phone: +972-4-959-0508 Fax: +972-4-959-0506 Italy - Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031116 Lithuania - Vilnius Phone: +370-5-2131-402 Fax: +370-5-2131-403 Netherlands - 's-Hertogenbosch Phone: +31-73-624-62-46 Fax: +31-73-621-23-65 Product Information Center: (Technical Support) Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway - Nesbru Phone: +47-66-77-8886 Fax: +47-66-77-8855 Poland - Warsaw Phone: +48-22-45-76-700 Fax: +48-22-45-76-720 Romania - Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574 Switzerland - Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey - Istanbul Phone: +90-212-281-8181/2/3 Fax: +90-212-281-8184 Ukraine - Kiev Phone: +380-044-206-2265 Fax: +380-044-206-2264 For Middle East/African Countries Not Shown Phone: +33-1-3420-8866 Fax: +33-1-3420-8300 Russia - Moscow Phone: +7-095-926-5506/07/08/09 Fax: +7-095-926-5505 Russia - St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193 Slovenia - Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 South Africa - Port Elizabeth Phone: +2741-503-4500 Fax: +2741-581-0440 Spain - Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Product Information Center: (Technical Support): Phone: +34-93-291-0330 Fax: +34-93-200-3779 Sweden - Upplands Vasby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 Tyco Electronics Corporation www.tycoelectronics.com Tyco Electronics Corporation Harrisburg, Pennsylvania www.tycoelectronics.com 1654763 Revised 06-2006 2.5M FP