The Essential Guide to Sensor Selection
5
2/03 © 2003 Schneider Electric All Rights Reserved
(1) M8 not Snap-C®Compatible
XUM XUK XUX
Design Miniature Design Compact 50 x 50 Design Compact
1.3' / 40 cm 3.28' / 1 m 6.5' / 2 m
4" / 10cm 11.8" / 30cm 4.2' / 1.3 m
9.8' / 3 m 13' / 4 m 36' / 11 m
45.8' / 14 m 98.2' / 30 m 131' / 40 m
direct: (Mounting holes 25.5) with M3 screws direct: (40 x 40) with M4 screws direct: (30 / 38 / 40 / 50 / 74) with M5 screws
P / 34 x 12 x 20 P / 50 x 18 x 50 P / 91 x 30 x 70
Alignment LEDs (✜): yes / Temperature range - 13…+ 131 °F (- 25…+ 55 °C) / Degree of protection (conforming to IEC 60 529): IP67 (XUK: IP65)
XUM0APSAL2 ––
XUM0ANSAL2 ––
–XUK0AKSAL2 –
XUM0APSAM8 (1) – –
XUM0ANSAM8 (1) – –
–XUK0AKSAM12 XUX0AKSAM12
––XUX0AKSAT16
100 / 50 100 / 50 100 / 50
Switching frequency (Hz): 250 / Overload and short-circuit protection: YES / Output state LED (✖) / Power on LED (★): yes
XUM0AKSAL2T XUK0AKSAL2T XUX0AKSAM12T
XUM0AKSAM8T (1) XUK0AKSAM12T –
––XUX0AKSAT16T
–XUK0ARCTL2 –
––XUX0ARCTT16
–✖ / ★✖ / ★
–2020
–Adjustment 0 to 15 s, on delay, or off delay, or one shot
–XUK0ARCTL2T –
––XUX0ARCTT16T
Connector innovation
New, inno vative connector that is universal, simple and fast.
For all Telemecanique brand sensors with Snap-C compatible M12 connectors (pointed pins):
– cabling to the required length without using a screwdriver or soldering iron.
– ready in just a few seconds, no stripping required.
Mounting Devices continued Suitable plug-in female connectors, including pre-wired versions
Protective housing with ball joint M12 rod for ball joint Bracket for M12 rod
For Length 5 m
XUM… XUZM2004 without LED Elbowed Straight Snap-C
XUK… XUZK2004 M8 XSZCS152 XSZCS142 –
XUX… XUZX2004 XUZ2001 XUZ2003 M12 XSZCD112Y XSZCD102Y XZCC12FDM40V
Sna
p
-
C
®
com
p
atible
