CPH3214-TL-E - ON SEMICONDUCTOR

CPH3114 / CPH3214

No.6394-1/5

Applications

•Relay drivers, lamp drivers, motor drivers, flash.

Features

•Adoption of MBIT processes.

•Large current capacitance.

•Low collector-to-emitter saturation voltage.

•High-speed switching.

•Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm).

•High allowable power dissipation.

( ) : CPH31 14

Specifications

Absolute Maximum Ratings at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Collector-to-Base Voltage VCBO (--)15 V

Collector-to-Emitter Voltage VCEO (--)15 V

Emitter-to-Base Voltage VEBO (--)5 V

Collector Current IC(--)1.5 A

Collector Current (Pulse) ICP (--)3 A

Base Current IB(--)300 mA

Collector Dissipation PCMounted on a ceramic board (600mm2✕0.8mm) 0.9 mW

Junction Temperature Tj 150 °C

Storage Temperature Tstg --55 to +150 °C

Electrical Characteristics at Ta=25°C

Ratings

Parameter Symbol Conditions min typ max Unit

Collector Cutoff Current ICBO VCB=(--)12V, IE=0 (--)0.1 µA

Emitter Cutoff Current IEBO VEB=(--)4V, IC=0 (--)0.1 µA

DC Current Gain hFE VCE=(--)2V, IC=(--)100mA 200 560

Marking : CPH3114 : AP, CPH3214 : CP Continued on next page.

Ordering number : ENN6394A

62504 TS IM TB-00000306 / 70500 TS (KOTO) TA-2786

CPH3114 / CPH3214

PNP / NPN Epitaxial Planar Silicon Transistors

DC / DC Converter Applications

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft's

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

CPH3114 / CPH3214

No.6394-2/5

Continued from preceding page. Ratings

Parameter Symbol Conditions min typ max Unit

Gain-Bandwideth Product fTVCE=(--)2V, IC=(--)300mA (350) MHz

450 MHz

Output Capacitance Cob VCB=(--)10V, f=1MHz (17)9 pF

IC=(--)750mA, IB=(--)15mA (--120) (--180) mV

Collector-to-Emitter Saturation Voltage VCE(sat) 130 200 mV

IC=(--)1.5mA, IB=(--)30mA (--210) (--320) mV

240 360 mV

Base-to-Emitter Saturation Voltage VBE(sat) IC=(--)750mA, IB=(--)15mA (--)0.85 (--)1.2 V

Collector-to-Base Breakdown Voltage V(BR)CBO IC=(--)10µA, IE=0 (--)15 V

Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=(--)1mA, RBE=∞(--)15 V

Emitter-to-Base Breakdown Voltage V(BR)EBO IE=(--)10µA, IC=0 (--)5 V

Turn-ON Time ton See specified test circuit. (50)40 ns

Storage Time tstg See specified test circuit. (90) ns

180 ns

Fall T ime tfSee specified test circuit. (15)20 ns

Package Dimensions Switching Time Test Circuit

unit : mm

2150A

--0.2

--0.4

--0.6

--0.8

--1.0

--1.2

--1.4

--1.6

--1.8

--2.0

IC -- VCE

0 --0.2--0.1 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0.20.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

Collector-to-Emitter Voltage, VCE -- V

Collector Current, IC -- A

2.0

1.0

IC -- VCE

IB=0

Collector-to-Emitter Voltage, VCE -- V

Collector Current, IC -- A

1.8

1.6

1.4

1.2

0.8

0.6

0.4

0.2

IT01691 IT01692

CPH3114

--50mA

--30mA

--10mA

--40mA

--20mA

--2mA

--4mA

--6mA

--8mA

IB=0

CPH3214

50mA

40mA

30mA

20mA

10mA

8mA

6mA

4mA

2mA

1 : Base

2 : Emitter

3 : Collector

SANYO : CPH3

0.05

0.9

0.7 0.2 1.6 0.60.6

1.9

2.8

0.2

2.9 0.15

0.4

50Ω

INPUT OUTPUT

VRRBRL

VCC=5V

220µF 470µF

VBE=–5V

PW=20µsIB1

IB2

DC≤1% (For PNP, the polarity is reversed.)

20IB1= –20IB2= IC=750mA

CPH3114 / CPH3214

No.6394-3/5

1.0

100

23 57 23 257

0.01 1.00.1 3

1000

100

Collector Current, IC -- A

hFE -- IC

DC Current Gain, hFE

1000

10 23 57

--0.01 --1.0--0.1 23 57 23

100

CPH3114

VCE= --2V

--25

Ta=75°C

Collector Current, IC -- A

fT -- IC

Gain-Bandwidth Product, fT -- MHz

23 57 23 257

--0.01 --1.0--0.1 3

1000

100

Collector Current, IC -- A

hFE -- IC

DC Current Gain, hFE

1000

10 23 57

0.01 1.0

0.1 23 57 23

100

CPH3214

VCE=2V

--25

25°C

Ta=75°C

Collector Current, IC -- A

fT -- IC

Gain-Bandwidth Product, fT -- MHz

CPH3114

VCE= --2V CPH3214

VCE=2V

IT01695

IT01697

IT01696

IT01698

Collector-to-Base Voltage, VCB -- V

Cob -- VCB

Output Capacitance, Cob -- pF

23 57

--1.0 --10 23 23 57

1.0 10 23

1.0

100

Collector-to-Base Voltage, VCB -- V

Cob -- VCB

Output Capacitance, Cob -- pF

CPH3214

f=1MHz

IT01699 IT01700

CPH3114

f=1MHz

25°C

--1.0

--0.5

--0.9

--0.8

--0.7

--0.6

--0.4

--0.3

--0.2

--0.1

1.0

0.5

0.9

0.8

0.7

0.6

0.4

0.3

0.2

0.1

Base-to-Emitter Voltage, VBE -- V

IC -- VBE

Collector Current, IC -- A

0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2

CPH3114

VCE= --2V

--25°C

Ta=75°C

Base-to-Emitter Voltage, VBE -- V

IC -- VBE

Collector Current, IC -- A

0 0.2 0.4 0.6 0.8 1.21.0

--25°C

CPH3214

VCE=2V

Ta=75

IT01693 IT01694

CPH3114 / CPH3214

No.6394-4/5

23 57

--0.01 --1.0--0.1 23 57 23

--1000

--100

--10

523 57

0.01 1.00.1 23 57 23

1000

100

Collector Current, IC -- A

VCE(sat) -- IC

CPH3214

IC / IB=50

°C

Ta= --25

°C

Collector Current, IC -- A

VBE(sat) -- IC

0.1 23 57

0.01 1.00.1 23 57 23

1.0

CPH3214

IC / IB=50

Ta= --25

°C

Collector Current, IC -- A

VCE(sat) -- IC

CPH3114

IC / IB=50

75°C

°C

Ta= --25

°C

Collector Current, IC -- A

VBE(sat) -- IC

--10

--0.1 23 57

--0.01 --1.0--0.1 23 57 23

23 57

0.1 101.0 23 57 23

--1.0

CPH3114

IC / IB=50

Ta= --25

°C

IT01703

IT01705

IT01704

IT01706

°C

Ambient Temperature, Ta --

°C

PC -- Ta

Collector Dissipation, PC -- W

1.4

0.2

0.4

0.6

0.8

0.9

1.0

1.2

0 20 40 60 80 100 120 140 160

Collector-to-Emitter Voltage, VCE -- V

A S O

Collector Current, IC -- A

1.0

0.1

0.01

DC operation

100ms

10ms

500µs

100µs

ICP=3A

IC=1.5A

IT01707 IT01708

1ms

CPH3114 / CPH3214 CPH3114 / CPH3214

°C

23 57

0.01 1.00.1 23 57 23

1000

100

Collector Current, IC -- A

VCE(sat) -- IC

Collector Current, IC -- A

VCE(sat) -- IC

23 57

--0.01 --1.0--0.1 23 57 23

--1000

--100

--10

CPH3114

IC / IB=20

--25

°C

Ta=75°C

IT01701 IT01702

CPH3214

IC / IB=20

--25

°C

Ta=75

°C

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Base-to-Emitter

Saturation Voltage, VBE(sat) -- V

Base-to-Emitter

Saturation Voltage, VBE(sat) -- V Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Mounted on a ceramic board (600mm

✕0.8mm)

Ta=25

°C

Single pulse

Mounted on a ceramic board (600mm2✕0.8mm)

For PNP, minus sign is omitted.

CPH3114 / CPH3214

No.6394-5/5

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer’s

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of June, 2004. Specifications and information herein are subject

to change without notice.