Speaker
Page <1> 03/03/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
Dimensions : Millimetres
Tolerance : ±0.2
Specification Table
No. Item Specification Test Condition
1 Impedance 8 ±15% at 800 KHz
2Resonant Frequency (fo)500 Hz ±20% -
3Frequency Range F0-8 KHz -
4Rated Power 2 W -
5Maximum Power 3 W -
6 S.P.L. 88 ±3 dB 0.1 W / 0.1 M at 2 KHz
Page <2> 03/03/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
Speaker
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Specification Table
No. Item Specification Test Condition
7 Distortion Max. 5% at rated power 1 KHz
8Sweep test must be normal at sine wave 4 V
9Load Test after test meet item 8 rated noise power, 24 hrs
10 Heat Test after test meet item 8 50 ±2°C 5 hrs
11 Cold Test after test meet item 8 -20 ±2°C 5 hrs
12 Humidity Test after test meet item 8 40 ±2°C, 90 / 95% R.H. 5 hrs
13 Polarity Test When supplied plus D.C. voltage to (+) terminal, the cone must move to forward
Output Response (Signal 1) - Input (Magnitude)
Working : Input : Input : SSR Analyzer
(Hz)
Description Part Number
Speaker MCKP40X28SP2-4622
Part Number Table