The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. High Power Fixed Attenuators (Radiator built-in) AT-1000 and AT-1100 Series Features 1.Small Size and Economical Beryllia is used for the material of the resistance element to enable the termination to be of small size and low cost. 2.Connectors Used In the coupling portion, the AT-1000 Series has an SMA type plug-jack and the AT-1100 Series has an N type plug-jack. 3.High Reliability AT-1003(40) AT-1106(40) These attenuators show stable characteristics for environments of varying temperature, humidity, and gases. Product Specifications Ratings Frequency range Characteristic impedance Maximum Input Power Item DC to 8.0 GHz 50 ohms 10W Operating temperature range Operating relative humidity Standard Conditions Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions 1.Vibration No electrical discontinuity of 1 s or more 2.Shock -10c to +65c 95% Max. No damage, cracks, or parts dislocation Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55c +15c to +35c +85c +15c to +35c Time: 30 15 max. 30 15 max. (Minutes) 5 cycles 3.Temperature cycle No damage, cracks, or parts dislocation The test method conforms to MIL-STD-202. Materials Ordering Information Part Material Finish Connector Body (Note) Stainless steel Passivated Insulator PTFE ---------- Male contacts Brass Gold plating Female contacts Beryllium copper Gold plating Outer conductor Aluminum Nickel plating Coupling (Note) Stainless steel Passivated Radiator Aluminum Black alumite Attenuation element Metal film ---------- AT - 10 01 (40) 1 2 3 1 AT: Indicates a fixed attenuator 2 Indicates the Series Name (Coupling Portion) 10: SMA type plug - jack 11: N type plug - jack 4 3 Attenuation 01 : 1dB 03 : 3dB 10 : 10dB 20 : 20dB 4 (40): RoHS compliant Note: Nickel plated brass is used for the body in the AT-1100 Series. ! CAUTION: Beryllia is used in this product. Please follow associated laws when disposing. 75 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have discontinued, or will be discontinued soon. Please Attenuators check the products status on thebuilt-in) Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. AT-1000 andbeen AT-1100 SeriesHigh Power Fixed (Radiator Specifications Part Number Frequency Range (GHz) Attenuation (dB) V.S.W.R. (Max) Impedance (ohms) Power (W) Connectors Weight (g) AT-1001(40) DC~8 10.5 1.3 50 10 HRM-J * P 80 AT-1002(40) DC~8 20.5 1.3 50 10 HRM-J * P 80 AT-1003(40) DC~8 30.5 1.3 50 10 HRM-J * P 80 AT-1006(40) DC~8 60.7 1.3 50 10 HRM-J * P 80 AT-1010(40) DC~8 101.0 1.3 50 10 HRM-J * P 80 AT-1020(40) DC~8 201.2 1.3 50 10 HRM-J * P 80 AT-1103(40) DC~8 30.5 1.3 50 10 H-J * P 124 AT-1106(40) DC~8 60.7 1.3 50 10 H-J * P 124 AT-1110(40) DC~8 101.0 1.3 50 10 H-J * P 124 AT-1120(40) DC~8 201.2 1.3 50 10 H-J * P 124 RoHS YES External Dimensions AT-1000 Type AT-1100 Type Typical Data AT-1003(40) V.S.W.R. 76 04/2009