CF CARD CONNECTOR MA Type Emboss Tape 1.27mm pitch/50-circuit CF card connector * Socket / SMT type * Card frame / for type I cards * Adapter / for type I, II cards * Header / for type I, II cards * Ejector / for type I, II cards Specifications ------------------- * Type: Dual-row at mating section * Current rating: 0.5 A AC, DC/Line * Temperature range: -20C to +60C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 40 m max. After environmental tests/ 20 m max. (variation from initial value) * Insulation resistance: 1,000 M min. 500 VDC (Except for Adapter cards) * Withstanding voltage: 500 VAC/minute (Except for Adapter cards) * Mating/unmating life: 10,000 cycles * Conforms to CFA. In addition to the connectors applicable to CF type I cards, those for CF type II cards are also available. 1 * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. CF CARD CONNECTOR MA Type PC board layout For Type I cards / Standoff 1.64 mm Normal type /Reverse type 460.05 43.20.05 40.160.05 31.1150.05 14.50.05 3 0.40.035 (Pattern width) 2-1.70.1 0 6.350.05 2.3 0.6350.05 (Pattern pitch) 50.05 2-2.20.1 0 Space-saving type For Type I cards / Standoff 0 mm Normal type/Reverse type Ejector mounted header with shutter For Type II cards Reverse type (Standoff 0 mm) 49 0.03 0.78 0.03 31.115 0.05 0.635 0.03 31.115 0.05 1.27 0.05 4-1.60.1 0 0.03 0.05 4.35 45 0.03 49.8 0.03 Space-saving type For Type II cards / Standoff 0 mm Normal type Reverse type 45.13 0.05 39.20.05 0.05 3.35 0.4 0.035 (Pattern width) 1.10.05 0 1.8 0.05 2-2.10.05 0 33.95 44.38 0.05 43.33 0.05 37.3 8.150.05 0.635 0.05 (Pattern pitch) 0.05 3.85 0.05 1.55 0.05 31.115 0.05 1.60.05 0 3 0.05 26.5 0.05 38.9 23.55 44.380.05 Reinforcement pitch 28.55 0.05 1.10.05 0 0.05 30.05 1.80.05 4.350.05 0.4 (Pattern width) 6.650.05 0.635 (Pattern pitch) 1.550.05 0.05 3.850.05 39.5 0.05 31.1150.05 0.05 1.60.05 0 41.3 0.03 0.03 33.950.05 41.4 31.7 49.8 0.03 0.05 1.9 0.05 0.85 0.05 50-0.45 0.1 0 1.55 0.4 0.03 1.15 0.05 0.635 0.05 0.9 0.05 2-2.2 0 0.03 36.40.05 0.05 2-1.25 0 R0.5 1.9 0.05 Components cannot be mounted inside of this area. 54 1.20.05 2 through-holes 1.2 1 0.2 49.50.05 Components cannot be mounted inside of this area. 43.630.05 1.20.05 2 CF CARD CONNECTOR MA Type Socket SMT type ICM-MA50S-TS12-3022 30.48 1.27 3.3 2.7 Offset amount 0.75 35.9 Circuit No.1 1 4 Circuit No.50 0.25 Circuit No.2 Circuit No.25 2 Circuit No.1 Circuit No.26 6 8 No.1 mark 0.5 33 Rib length Tail length 0.635 2.3925 31.115 ICM-MA50S-TS12-3023 30.48 1.27 3.3 2.7 35.9 Offset amount 0.2 6 3 Circuit No.50 0.25 Circuit No.2 Circuit No.25 Rib length 2 Circuit No.1 Circuit No.26 1 Circuit No.1 8 No.1 mark 0.5 33 Tail length 0.635 2.3925 Circuits Solder tail 50 SMT type GND spring With (Circuit No.1, No.26) 31.115 Offset Rib length Tail length dimensions(mm) (mm) (mm) 0.75 2.0 0.2 3.0 Q'ty/reel Material and Finish 1,500 Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Grounding spring: Copper alloy, nickel-undercoated, gold-plated Housing: LCP, UL94V-0, black ICM-MA50S-TS12-3022T 4.0 RoHS compliance These products display (LF)(SN) on a label. 3 Model No. ICM-MA50S-TS12-3023T CF CARD CONNECTOR MA Type Header (for Type I cards) Normal type (Standoff 1.64 mm) 46.6 34.8 31.115 0.3 26.5 19 L 7.5 0.5 5.2 0.635 43.03 30.48 Circuit No.25 1.27 1.4 Circuit No.26 6.62 0.89 0.79 1.27 3.55 Circuit No.1 Circuit No.50 Reverse type (Standoff 1.64 mm) 43.03 3.55 1.4 6.62 Circuit No.25 Circuit No.1 0.79 0.89 1.27 1.27 Circuit No.26 30.48 Circuit No.50 5.2 7.5 L (26.5) 19 46.6 0.3 0.635 0.5 31.115 34.8 Circuits Type Model No. Q'ty/box Material and Finish 140 Contact: Phosphor bronze, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: PPS, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) Normal ICM-MA50H-SS52-1141 50 Reverse ICM-MA50H-SS52-1161 RoHS compliance These products display (LF)(SN) on a label. Dimension L Circuit No. 1, 13, 38, 50 2 to 12, 14 to 24, 27 to 37, 39 to 49 25, 26 Dimensions (mm) 5.0 0.1 4.25 0.1 3.5 0.1 4 CF CARD CONNECTOR MA Type Header (for Type I cards) / Space-saving type Normal , Reverse types (Standoff 0 mm ) 44.8 0.3 0.3 33.4 31.115 3.4 0.3 L 2.3 5 1.3 0.635 2-2.2 0.1 0 30.48 1.27 Circuit No.1 Circuit No.25 Circuit No.26 Circuit No.50 33.95 Circuits Type Q'ty/box Model No. Normal ICM-MA50H-SS52-1184 50 Dimension L Circuit No. Material and Finish Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: PPS, UL94V-0, black Solder tab: Copper alloy, nickel-undercoated, tin-plated (reflow treatment) 1,850 Reverse Dimensions (mm) 1, 13, 38, 50 2 to 12, 14 to 24, 27 to 37, 39 to 49 25, 26 RoHS compliance This product displays (LF)(SN) on a label. 5.0 0.1 4.25 0.1 3.5 0.1 Ejector mounted header with shutter (for Type II cards) Reverse type (Standoff 0 mm) 52.7 8.25 7.35 49 3.8 Circuit No.1 3.3Card stroke 14.1 4.4Button stroke 31.7 45 3.6 6.35 5.5Shutter stroke Circuit No.26 51 Circuit No.25 41.3 Circuit No.50 5 49.8 43.03 30.48 0.9 Circuit No.50 Circuit No.26 Circuit No.25 Circuit No.1 3.6 3.47 1.27 0.9 0.635 31.115 Circuits 50 Type Reverse Model No. ICM-MA2SL-SD12-RL31 RoHS compliance This product displays (LF)(SN) on a label. 5 Q'ty/box 128 Material and Finish Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing/ Guide bar/ Push button: PPS, UL94V-0, black Lock/ Rotation arm/ Push bar: Stainless Frame: Stainless, selective nickel-undercoated, tin/copper alloy-plated 7.5 CF CARD CONNECTOR MA Type Header (for Type II cards) / Space-saving type Normal type (Standoff 0 mm) 0.3 0.3 44.53 5.4 31.115 0.3 1.9 8 L 5 0.635 43.03 0.89 30.48 1.27 Circuit No.25 Circuit No.26 0.79 2.05 1.4 3.5 Circuit No.1 Circuit No.50 39.2 44.38 Reverse type (Standoff 0 mm) 0.3 44.53 0.3 31.115 5.35 4.88 0.3 8 L 5 0.635 45.18 43.03 1.27 Model No. Reverse ICM-MA2H-SS52-R13HT 3.5 1.4 Circuit No.1 Q'ty/rell Material and Finish 750 Contact: Phosphor bronze, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: PPS, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) Normal ICM-MA2H-SS52-N13LT 50 Circuit No.26 1.85 Circuit No.25 Circuits Type 0.89 3.6 0.79 Circuit No.50 1.27 30.48 0.89 RoHS compliance These products display (LF)(SN) on a label. These products listed above are supplied on embossed-tape. Dimension L Circuit No. 1, 13, 38, 50 2 to 12, 14 to 24, 27 to 37, 39 to 49 25, 26 Dimensions (mm) 5.0 0.1 4.25 0.1 3.5 0.1 6 CF CARD CONNECTOR MA Type Ejector (for Type I Header) Left button Right button 29.5 29.5 23.6 25 (3.3) Card stroke 4.2 Button stroke 2.8 6.6 6.6 17.4 17.4 Button stroke 25 23.6 (3.3) Card stroke 4.2 5.6 5.6 26.5 2.8 26.5 Type Model No. Q'ty/box Material Applicable header Right button ICM-MAE-R01 100 Frame/ Rotation arm : Stainless ICM-MA50H-SS52-1141 Push button: PPS, UL94V-0, black ICM-MA50H-SS52-1161 Left button ICM-MAE-L01 100 RoHS compliance Applicable headers display (LF)(SN) on a label. Ejector mounted header (for Type I Header) / Space-saving type Left button 3.53 Card stroke 45.4 3.215 25.88 0.1 0 43.1 6.3Button stroke 2-2.2 4.65 1.4 38.63 2.425 4 23.87 39.53 Type Reverse (Left button) Model No. ICM-MAE-L91ND Q'ty/box Material and Finish Applicable header 252 Frame: Stainless, nickel-undercoated, tin/copper alloy-plated Rotation arm: Stainless Push button: Synthetic resin, UL94V-0, gray ICM-MA50H-SS52-1184 RoHS compliance This product displays (LF) on a label. An applicable header displays (LF)(SN) on a label. 7 CF CARD CONNECTOR MA Type Ejector (for Type II header) / Space-saving type For Normal type header (Standoff 0 mm) Left button 22.57 2-2.1 37.4 26.9 3.2 35.1 13 2.7 Card stroke 25.03 4.5 Button stroke 6.3 49.5 25.5 4.7 Circuit No.1 Circuit No.25 Circuit 50 Circuit 26 39.2 For Normal type header (Standoff 0 mm) Left button/Push-push type For Reverse type header (Standoff 0 mm) Left button/Push-push type 4.65 45.13 38.73 4.45 Type 20 32 43.03 43.03 Model No. Material and Finish Q'ty/box ICM-MAE-L73FA 36 Rotation arm/Push bar/Push plate/ Frame: Stainless Button: PBT, UL94V-0, gray For Normal type header (Standoff 0 mm) Left button, Push-push ICM-MA2EP-L520A 36 Rotation arm/Push plate: Stainless Button: PBT, UL94V-0, black Frame: Stainless, selective nickel-undercoated, tin/copper alloy-plated For Reverse type header (Standoff 0 mm) Left button, Push-push ICM-MA2EP-L810E 36 Arm: Stainless Push button: Synthetic resin, UL94V-0, black Frame: Stainless, selective nickel-undercoated, tin/copper alloy-plated For Normal type header (Standoff 0 mm) Left button 36.4 2.9Card stroke 37.4 36 3Card stroke 13 7.5 3.4 45.13 Applicable header ICM-MA2H-SS52-N13L ICM-MA2H-SS52-N13LT ICM-MA2H-SS52-R13HT RoHS compliance ICM-MA2EP-L520A/ICM-MA2EP-L810E display (LF) on a label. Applicable headers display (LF)(SN) on a label. 8 CF CARD CONNECTOR MA Type Card frame (for Type I cards) ICM-MA50F-A/B-FB-C Frame A Frame B 42.8 2.9 Applicable socket ICM-MA50F-A/B-FB-CA ICM-MA50S-TS12-3023T 30.9 (Component assembling area) 38 (Component assembling area) Model No. as a set (Frame A + Frame B) 50 36.4 2.9 30.9 (Component assembling area) 36.4 Circuits 42.8 (Glue position) (Glue position) 38 (Component assembling area) Q'ty/box 150 Material Frame: Glass-filled PBT, UL94V-0 Cover: Stainless RoHS compliance Adapter card For CF Type I cards (PC card 5V key) 1 1.6 68 circuits side 1 1 5max 42 3.3 22 85.6 43.3 54 50 circuits side Model No. ICM-MA50A-C441N Q'ty/box Material and Finish 50 circuits side Header Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: PPS, UL94V-0 68 circuits side Socket Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: LCP, UL94V-0 Grounding spring: Copper alloy, nickel-undercoated, gold-plated 48 RoHS compliance This product displays (LF)(SN) on a label. 9 Cover: Stainless Frame: PBT, UL94V-0 PC board: Glass-epoxy, UL94V-0 CF CARD CONNECTOR MA Type Adapter card For CF Type II cards (PC card 3.3 V key with GND clip spring) 1.6 2.1 68 circuits side 1 1 5max 42 3.3 85.6 33.35 54 50 circuits side Model No. ICM-MA2A-C454N Q'ty/box Material and Finish 50 circuits side Header Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: PPS, UL94V-0 68 circuits side Socket Contact: Copper alloy, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Housing: LCP, UL94V-0 Grounding spring: Copper alloy, nickel-undercoated, gold-plated 48 Cover: Stainless Frame: PBT, UL94V-0 PC board: Glass-epoxy, UL94V-0 Contact spring: Copper alloy Shutter: PPS, UL94V-0 Spring: Stainless Lock: Stainless RoHS compliance This product displays (LF)(SN) on a label. 10