B39781B8005P810 - TDK - Product.Network

RF360 Europe GmbH

A Qualcomm – TDK Joint Venture

RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries of

RF360 Holdings Singapore Pte. Ltd. (collectively, the “RF360 Subsidiaries”). RF360 Holdings Singapore Pte. Ltd.

is a joint venture of Qualcomm Global Trading Pte. Ltd. and EPCOS AG. References in this documentation to

EPCOS AG should properly reference, and shall be read to reference, the RF360 Subsidiaries.

RF360 Europe GmbH, Anzinger Str. 13, München, Germany

SAW Components

SAW Duplexer for Smallcell

Band 13 (3G/LTE)

Series/type: B8005

Ordering code: B39781B8005P810

Date: February 25, 2015

Version: 2.1

These materials, including the information contained herein, may be used only for informational purposes by

the customer. The RF360 Subsidiaries assume no responsibility for errors or omissions in these materials or

the information contained herein. The RF360 Subsidiaries reserve the right to make changes to the product(s)

or information contained herein without notice. The materials and information are provided on an AS IS basis,

and the RF360 Subsidiaries assume no liability and make no warranty or representation, either expressed or

implied, with respect to the materials, or any output or results based on the use, application, or evaluation of

such materials, including, without limitation, with respect to the non-infringement of trademarks, patents,

copyrights or any other intellectual property rights or other rights of third parties.

No use of this documentation or any information contained herein grants any license, whether express, implied,

by estoppel or otherwise, to any intellectual property rights, including, without limitation, to any patents owned

by QUALCOMM Incorporated or any of its subsidiaries.

Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to

others without the express written permission of RF360 Europe GmbH.

Qualcomm and Qualcomm RF360 are trademarks of Qualcomm Incorporated, registered in the United States

and other countries. RF360 is a trademark of Qualcomm Incorporated. Other product and brand names may be

trademarks or registered trademarks of their respective owners.

This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws.

Diversion contrary to U.S. and international law is strictly prohibited.

SAW Components

SAW Duplexer for Smallcell

Band 13 (3G/LTE)

Series/type:

Ordering code: B8005

B39781B8005P810

Date:

Version: February 25, 2015

2.1

 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information

contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

2February 06, 2014

B8005

782.0 / 751.0 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW Duplexer

DataSheet

Application

■Low-loss SAW duplexer for LTE smallcell systems

(Band 13)

■Low insertion attenuation

■Low amplitude ripple

■Usable passband 10 MHz

■High power durability

■Industrial qualification

■Rx = Uplink =

777-787

MHz

■Tx = Downlink =

746-756

MHz

Features

■Package size 2.5 * 2.0 * 0.5 mm3

■max. Package height 0.5 mm

■RoHS compatible

■Package for Surface Mount Technology (SMT)

■Ni, Au-plated terminals

■Electrostatic Sensitive Device (ESD)

■Moisture Sentivity Level 3

Pin configuration

■3 RX output

■1 TX input

■6 Antenna

■2, 4, 5, 7, 8, 9 To be grounded

5,7,8

1,3

4,5,92,7,8

3February 06, 2014

B8005

782.0 / 751.0 MHz

SAW Components

SAW Duplexer

DataSheet

Please read

cautions and warnings and

important notes

at the end of this document.

Characteristics

Temperature range for specification: T = –10 ˚C to +85 ˚C

Antenna terminating impedance: ZANT=50Ω || 17 nH

RX terminating impedance: ZRX =50Ω

TX terminating impedance: ZTX =50Ω

Characterisitcs ANT - RX min. typ.

@ 25 ˚C max.

Center frequency fC782.0 MHz

Maximum insertion attenuation αmax

777.0 ... 787.0 MHz - 1.9 2.5 dB

Amplitude ripple (p-p) ∆α

777.0 ... 787.0 MHz - 0.6 1.5 dB

Error Vector Magnitude EVM1)

1) Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141

@fcarrier 779.5 ... 784.5 MHz - 2.2 3.0 %

Input VSWR (ANT port)

777.0 ... 787.0 MHz - 1.5 1.8

Output VSWR (RX port)

777.0 ... 787.0 MHz - 1.6 1.8

Attenuation α

10.0 ... 150.0 MHz 40 55 - dB

150.0 ... 350.0 MHz 35 45 - dB

350.0 ... 650.0 MHz 30 37 - dB

728.0 ... 746.0 MHz 35 50 - dB

746.0 ... 756.0 MHz 50 57 - dB

758.0 ... 768.0 MHz 28 30 - dB

808.0 ... 818.0 MHz 35 47 - dB

859.0 ... 894.0 MHz 35 45 - dB

1452.0 ... 1492.0 MHz 40 52 - dB

1554.0 ... 1574.0 MHz 40 52 - dB

1574.0 ... 1606.0 MHz 45 52 - dB

1670.0 ... 1675.0 MHz 40 50 - dB

1930.0 ... 1995.0 MHz 40 48 - dB

2110.0 ... 2170.0 MHz 40 49 - dB

2300.0 ... 2361.0 MHz 28 33 - dB

2361.0 ... 2690.0 MHz 30 42 - dB

3300.0 ... 3800.0 MHz 15 22 - dB

5150.0 ... 5850.0 MHz 5 12 - dB

4February 06, 2014

B8005

782.0 / 751.0 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW Duplexer

DataSheet

Characteristics

Temperature range for specification: T = –10 ˚C to +85 ˚C

Antenna terminating impedance: ZANT=50Ω || 17 nH

RX terminating impedance: ZRX =50Ω

TX terminating impedance: ZTX =50Ω

Characterisitcs TX - ANT min. typ.

@ 25 ˚C max.

Center frequency fC751.0 MHz

Maximum insertion attenuation αmax

746.0 ... 756.0 MHz - 1.6 2.0 dB

Amplitude ripple (p-p) ∆α

746.0 ... 756.0 MHz - 0.4 1.0 dB

Error Vector Magnitude EVM1)

1) Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141

@fcarrier 748.5 ... 753.5 MHz - 1.6 2.5 %

Input VSWR (TX port)

746.0 ... 756.0 MHz - 1.5 1.8

Output VSWR (ANT port)

746.0 ... 756.0 MHz - 1.4 1.8

Attenuation α

10.0 ... 150.0 MHz 40 55 - dB

150.0 ... 350.0 MHz 35 45 - dB

350.0 ... 650.0 MHz 30 38 - dB

698.0 ... 716.0 MHz 35 38 - dB

716.0 ... 722.0 MHz 38 43 - dB

777.0 ... 787.0 MHz 54 58 - dB

788.0 ... 798.0 MHz 45 52 - dB

798.0 ... 849.0 MHz 35 43 - dB

1492.0 ... 1543.0 MHz 35 39 - dB

1554.0 ... 1574.0 MHz 35 39 - dB

1574.0 ... 1606.0 MHz 35 40 - dB

1710.0 ... 1770.0 MHz 35 40 - dB

1850.0 ... 1915.0 MHz 35 40 - dB

1920.0 ... 1980.0 MHz 35 40 - dB

2200.0 ... 2690.0 MHz 33 38 - dB

2690.0 ... 3800.0 MHz 25 43 - dB

5150.0 ... 5850.0 MHz 5 25 - dB

5February 06, 2014

B8005

782.0 / 751.0 MHz

SAW Components

SAW Duplexer

DataSheet

Please read

cautions and warnings and

important notes

at the end of this document.

Characteristics

Temperature range for specification: T = –10 ˚C to +85 ˚C

Antenna terminating impedance: ZANT=50Ω || 17 nH

RX terminating impedance: ZRX =50Ω

TX terminating impedance: ZTX =50Ω

Maximum Ratings

Characteristics TX-RX min. typ.

@ 25 ˚C max.

Attenuation α

746.0 ... 756.0 MHz 50 60 - dB

777.0 ... 787.0 MHz 52 58 - dB

Storage temperature range Tstg –40/+85 ˚C

DC voltage VDC 0 V

ESD voltage VESD 501)

1) According to JESD22-A115A (machine model), 1 negative and 1 positive pulses.

Vmachine model, 1 pulse

Input power at pin 1 source and load impedance 50 Ω

746.0 ...756.0 MHz Pin 282)

2) Time to failure (TTDF) according to accelerated power durability tests, and wear out models.

dBm

Pin 28 dBm average -

39 dBm peak

LTE 5 MHz downlink

T = 55˚C, 100.000 h

elsewhere Pin 10 dBm

OperatinglifetimewithOutput

power at antenna source and load impedance 50 Ω

746.0 ...756.0 MHz Pout 243)

3) according to accelerated High Temperature Operating Life (HTOL) test.

dBm Continuous wave T=55 ˚C,

100khrs

}

6February 06, 2014

B8005

782.0 / 751.0 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW Duplexer

DataSheet

Frequency Response ANT-RX

7February 06, 2014

B8005

782.0 / 751.0 MHz

SAW Components

SAW Duplexer

DataSheet

Please read

cautions and warnings and

important notes

at the end of this document.

Frequency Response TX-ANT

8February 06, 2014

B8005

782.0 / 751.0 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW Duplexer

DataSheet

Frequency Response TX-RX

9February 06, 2014

B8005

782.0 / 751.0 MHz

SAW Components

SAW Duplexer

DataSheet

Please read

cautions and warnings and

important notes

at the end of this document.

S11 VSWR (RX)

S22 VSWR (ANT)

S33 VSWR (TX)

10 February 06, 2014

B8005

782.0 / 751.0 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW Duplexer

DataSheet

EVM RX

EVM TX

11 February 06, 2014

B8005

782.0 / 751.0 MHz

SAW Components

SAW Duplexer

DataSheet

Please read

cautions and warnings and

important notes

at the end of this document.

References

Type B8005

Ordering code B39781B8005P810

Marking and package C61157-A3-A27

Packaging F61074-V8232-Z000

Date codes L_1126

S-parameters B8005_NB.s3p, B8005_WB.s3p

See file header for port/pin assignment table

Soldering profile S_6001

RoHS compatible RoHS-compatible means that products are compatible with the

requirements according to Art. 4 (substance restrictions) of Di-

rective 2011/65/EU of the European Parliament and of the

CouncilofJune8th, 2011,ontherestrictionoftheuseofcertain

hazardous substances in electrical and electronic equipment

("Directive")withdueregardtotheapplicationofexemptionsas

per Annex III of the Directive in certain cases.

Moldability Before using in overmolding environment, please contact your

EPCOS sales office.

Matching coils See Inductor pdf-catalog

http://

www

.tdk.co.jp/tefe02/coil.htm#aname1

and Data Library for circuit simulation

http://www.tdk.co.jp/etvcl/index.htm

For further information please contact your local EPCOS sales office or visit our webpage at

ww.epcos.com .

Published by EPCOS AG

Systems, Acoustics, Waves Business Group

P.O. Box 80 17 09, 81617 Munich, GERMANY

EPCOS AG 2015. This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or

he international Representatives.

Due to technical requirements components may contain dangerous substances. For information on

he type in question please also contact one of our Sales Offices.

12 February 06, 2014

Important notes

he following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately

incumbent on the customer to check and decide whether an EPCOS product with the

properties described in the product speciﬁcation is suitable for use in a particular customer

application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as speciﬁed. In customer applications

requiring a very high level of operational safety and especially in customer applications in

which the malfunction or failure of an electronic component could endanger human life or

health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by

means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained

by third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-speciﬁc notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales ofﬁces.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

speciﬁcations. Please check therefore to what extent product descriptions and speciﬁcations

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Conse-

quently, we cannot guarantee that all products named in this publication will always be

available. The aforementioned does not apply in the case of individual agreements deviating

from the foregoing for customer-speciﬁc products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current

version of the “General Terms of Delivery for Products and Services in the Electrical

Industry” published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,

CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue,

MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine,

SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D,

SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and

in other countries. Further information will be found on the Internet at