Ribbon Cable
Interconnect Solutions
TE Connectivity Catalog 82012 Revised 4-12
te.com
© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
82012 LUG Printer ?M 04/2012
TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or
company names might be trademarks of their respective owners.
Ribbon Cable Interconnect Solutions
2
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Connector Selection Guide
Ribbon Cable Interconnect Solutions
Male-on-Wire
215083 Series,
Page 12
Mates to .50" x .50"
Micro-MaTch
Female Top Entry,
215079 Series,
PCB Connector
Page 8
.050" [1.27 mm]
Cable Pitch
Male-on-Wire
215083 Series,
Page 12
Mates to .050" x .050"
Micro-MaTch
Female Side Entry,
215460 Series,
PCB Connector
Page 9
Male-on-Wire
215083 Series,
Page 12
Mates to .050" x .050"
Micro-MaTch
Female Top Entry
SMD, 188275 Series,
PCB Connector
Page 10
50/50 Grid
Receptacle
Connector with or
without latch
50/50 Grid
Receptacle
Connectors
without latch
Mates to 50" x 50"
Right-Angle
Headers
Mates to 50" x 50"
Vertical Headers
Paddle Board
Connector,
215570 Series,
Page 13
Solders directly to
2.54mm x 1.27mm
Staggered 2 row
PCB Footprint
.050" [1.27 mm]
Cable Pitch
(Continued)
System 50
Receptacles
Pages 8-11
Mates to .050" x .100"
2-Row Pin Header
Grid
Pages 10 and 11
Ultra ATA Bus
Receptacles
Pages 13-15
Mates to .100" x .100"
2-Row Pin Header
Grid
Page 15
Solders to
.075" x .100"
4-Row PCB Layout
.025" [0.64 mm]
Cable Pitch
Mates to .078" [2 mm]
x.078" [2 mm]
2-Row Pin Header
Grid
See 5176264, 5178751 Series
and Part Number 1775109
(Not in this Catalog)
.039" [1.00 mm]
Cable Pitch
2 mm
Receptacle
Connectors
Pages 16 and 17
System 50
Paddleboard
Page 12
Ribbon Cable Connector Selection Guide
3
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Connector Selection Guide (Continued)
Ribbon Cable Interconnect Solutions
Universal I/O
Pin Connectors
Pages 45 and 46
Mates to .100" x .100"
Novo Type Female
Socket Connector
Pages 48-51
EUROLATCH
Receptacles
Page 47
Mates to .100" x .100"
3-Row Eurocard
Type C & R
See Catalog 82721
Novo
Connectors
Pages 48-51
622 and 636
Series Female
Socket Connectors
Pages 52 and 53
Mates to .100" x .100"
2-Row Universal or
Low-Profile Headers
Pages 75-96
609 Series
Female
Socket Connectors
Pages 54 and 55
.050" [1.27 mm]
Cable Pitch
(Continued)
.100" x .300"
Footprint
.100" x .100"
Footprint
Mates to
2-Row DIP Sockets
or Solders to PCB
.100" x .600"
Footprint
622 and
636 Series
DIP Plugs
Page 57
609 Series
DIP Plugs
Page 56
DIP Plugs
Page 58
TE ConnectivityTE Connectivity
DIP Plugs
Page 59
TE Connectivity
DIP Plugs
Page 60
Solder
Transition
Connectors
Page 61
Solders to
.050" x .100"
4-Row PCB Footprint
.050" [1.27 mm]
Cable Pitch
(Continued)
Ribbon Cable Connector Selection Guide
4
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Introduction
Ribbon Cable Interconnect Solutions
Restriction on the use of Hazardous Substances
(RoHS)
At TE Connectivity, we’re ready to support your RoHS require-
ments. We’ve assessed more than 1.5 million end items/com-
ponents for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted mate-
rials. Part numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the defini-
tion of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24 hours
during a normal work week. The Support Center also provides:
■Cross-Reference from
Non-compliant to Compliant Products
■Ability to browse RoHS
Compliant Products in our
on-line catalog
■Downloadable Technical Data
Customer Information
Presentation
■More detailed information
regarding the definitions
used above
■So whatever your questions when it comes to RoHS, we
have the answers at www.te.com/leadfree
RoHS
Customer
Support
Center
Disclaimer
While TE has made every reasonable
effort to ensure the accuracy of the
information in this catalog, TE does
not guarantee that it is error-free, nor
does TE make any other representation,
warranty or guarantee that the informa-
tion is accurate, correct, reliable or
current. TE reserves the right to make
any adjustments to the information
contained herein at any time without
notice. TE expressly disclaims all implied
warranties regarding the information
contained herein, including, but not
limited to, any implied warranties of
merchantability or fitness for a particular
purpose. The dimensions in this catalog
are for reference purposes only and
are subject to change without notice.
Specifications are subject to change
without notice. Consult TE for the latest
dimensions and design specifications.
© 2012, 2009, 1999, 1998, 1996, 1995,
1993, 1992, 1989, 1988, 1986, 1985,
1983, 1982, 1977, 1976, 1974 and 1973
Tyco Electronics Corporation.
All Rights Reserved.
AMP, AMPLIMITE, AMPMODU, CHAMP,
EUROLATCH, TE Connectivity and the
TE connectivity (logo) are trademarks
of the TE Connectivity Ltd. family of
companies.
Other logos, product and Company
names mentioned herein may be
trademarks of their respective owners.
5
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Introduction (Continued)
Ribbon Cable Interconnect Solutions
Mass termination capabili-
ties of the ribbon cable
connectors have helped
make ribbon cable, and
particularly .050 [0.127]
centerline cable, popular
within the Electronics
Industry. The ability to termi-
nate up to 64 conductors
simultaneously, without
stripping or otherwise pre-
paring the cable, presents
obvious labor savings.
Ribbon Cable Connectors
are wire-to-board devices
used to make the transition
between cable and pc
board circuitry. They find
heavy use within equipment
to connect one board to
another or one subsystem
to another. The connectors
are also used in input/out-
put applications, connecting
different pieces of equipment.
Ribbon Cable Solutions are
available on three separate
cable centerline spacings.
They include:
.025 [0.64] Centerlines
■System 50 receptacles
■System 50 paddleboards
■Pin headers
.039 [1.00] Centerlines
■2.0 mm receptacles
■Breakaway pin headers
.050 [1.27] Centerlines
■50/50 Grid connectors
■Micro-MaTch connectors
■Novo Receptacle
connectors
■DIP plugs
■EUROLATCH receptacle
connectors per DIN
41612 and IEC 603-2
■Pin Headers
System 50 ribbon cable
receptacles will terminate
cable on .025 [0.64] center-
lines. They are available in
select sizes from 20 thru
100-positions, and accept
wire size range 30 AWG
[0.05 mm2] solid or
stranded wire and 32 AWG
[0.03 mm2] stranded pvc
insulated wire. Housing and
cover are made of high tem-
perature tolerant thermo-
plastic material, black, UL
94V-0 rated. A single mating
beam, phosphor bronze
contact provides the inter-
connect between the con-
ductor and the .0152[0.382]
posts on .050 x .100 [1.27 x
2.54] grid. Also available in
paddleboard configurations.
2.0 mm [.079] ribbon
cable receptacles feature
contacts on a true 2.0 mm
[.079 in.] mating grid for
1.0 mm [.039 in.] pitch
ribbon cable. Select
configurations are available
between 8 and 50-positions.
Receptacles feature
insulation displacement
contacts (IDC).
50/50 Grid connectors
Although AMPMODU 50/50
Grid Vertical Headers and
Receptacles are designed
for parallel board-to-board
stacking in high density
applications, Right-angle
board-to-board and cable-
to-board applications are
also possible since the
vertical receptacles also
mate with non-latching
right-angle headers and the
vertical headers also mate
with non-latching cable con-
nectors.
Micro-Match connectors
Miniaturization and the trend
towards higher density of
electronic functions on a
substrate led to the intro-
duction of Micro-MaTch. The
system offers a range of
board and wire connectors,
enabling a variety of wire-to-
board and board-to-board
interconnections. Its design
prevents the traditional
failure mode in tin-plated
connections, fretting corro-
sion. An additional position-
ing spring in the female part
absorbs relative movements
caused by vibrations and
thermal expansion between
male and female contacts.
By preventing movements
on the contact spot, a gas
tight connection can be
guaranteed under all
circumstances.
Novo receptacles feature
two rows of contacts on
.100 x .100 [2.54 x 2.54]
centers on selected sizes
of 10 thru 64-positions
and mate with .025 [0.64]
square or round posts. The
Novo tuning-fork contact
offers a military-approved
design, at an affordable
cost. Polarization options
include military, center and
military, or dual bar.
DIP (Dual In-Line Package)
plugs provide a permanent
connection of ribbon cable
to a pc board or mating
to DIP sockets. Using the
same centerline dimensions
as DIP integrated circuits,
DIP plugs offer space
efficiency and a low profile
of .253 [6.43].
Need more information?
Call Technical Support at
the numbers listed below.
Technical Support is staffed
with specialists well versed
in all TE products. They can
provide you with:
■Technical Support
■Catalogs
■Technical Documents
■Product Samples
■TE Authorized Distributor
Locations
6
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Table of Contents
Ribbon Cable Interconnect Solutions
Ribbon Cable Connector Selection Guide ..................................2,3
.025 [0.64] Centerline Ribbon Cable Connectors
System50Connectors .................................................8-12
Cable-to-BoardConnectors .........................................8,9,12
Board-to-BoardConnectors ..........................................10,11
UltraATABusConnectors .............................................13-15
.039 [1.00] Centerline Ribbon Cable Connectors
2mm[.079]ReceptacleConnectors .....................................16,17
AMPMODU 50/50 Grid Connector System
Introduction ...........................................................18
Board-to-Board Vertical Receptacles and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Board-to-Board Vertical Receptacles, Double Row, .050 x .050
[1.27x1.27]Centers ................................................20
Board-to-Board Vertical Headers, Double Row, .050 x .050 [1.27 x 1.27] Centers . . . 21
Recommended PC Board Layouts for Vertical Connectors . . . . . . . . . . . . . . . . . . . . . 22
Board-to-Board Right-Angle Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Board-to-Board Right-Angle Headers, Double Row, .050 x .050 [1.27 x 1.27]
Centers...........................................................24
Cable-to-BoardConnectors...............................................25
Cable-to-Board Receptacle Connectors, Double Row, .050 x .050 [1.27 x 1.27]
Centers...........................................................26
Terminating Covers for Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Application Tooling for Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
PerformanceSpecifications ...............................................29
TechnicalDocuments ...................................................29
Micro-MaTch Connector System
MiniatureConnectorSystem ..............................................30
SystemOverview/TechnicalData ..........................................31
Applications(3Dimensions) ..............................................32
Applications(2Dimensions) ..............................................33
Female-on-Board Connector, Top Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Female-on-Board Connector, Side Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Female-on-Board Connector Surface Mount Device (SMD) . . . . . . . . . . . . . . . . . . . . . 36
Male-on-BoardConnector ...............................................37
Male-on-WireConnector ................................................38
PaddleBoardConnector ................................................39
CrimpOnSnapIn(COSI)Connector .......................................40
Specials .............................................................41
ApplicationTooling ..................................................42,43
LeadAssemblyandSampleBox ..........................................44
.050 [1.27] Centerline Ribbon Cable Connectors
Universal I/O Pin Connectors without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Universal I/O Pin Connectors with Slotted Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . 46
EUROLATCH Receptacles 64-Position (Three-Row Housings, Two Rows Loaded) . . . . 47
NovoConnectors ....................................................48-51
Military Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Center and Military Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . 50
Dual Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series . . . 52, 53
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series . . . . . . . . . 54, 55
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series . . . . . . . . . . . . . . . . . . . . . . . . 56
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series . . . . . . . . . . . . . . . . . . . . . . . . 57
7
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Table of Contents (Continued)
Ribbon Cable Interconnect Solutions
.050 [1.27] Centerline Ribbon Cable Connectors (Continued)
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
DIP Plugs, .100 x .300 [2.54 x 7.62] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
DIP Plugs, .100 x .600 [2.54 x 15.24] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
4-Row PCB Solder Transition Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
1-RowHorizontalReceptacle .............................................62
Accessories
FlexiblePullTabs .......................................................63
UniversalI/OLatches ...................................................63
MilitaryPolarizers ......................................................63
KeyingPlugs ..........................................................64
StrainRelieffor622SeriesDIPPlugs.......................................65
Pull Loops, Permanent (For Receptacles and Pin Connectors) . . . . . . . . . . . . . . . . . . . 66
Strain Relief for Universal I/O without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Strain Relief for 609 Series (Tulip Contact) Female Socket Connectors . . . . . . . . . . . . . 67
StrainReliefforNovoandUltraATA ........................................68
StrainRelieffor2mm ...................................................68
Strain Relief for 622 and 636 Series Female Socket Connectors . . . . . . . . . . . . . . . . . . 69
Application Tooling ...................................................70-74
Low Profile Headers ...................................................75-83
Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54]
Centerlines.......................................................76,77
Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54]
Centerlines and “Kinked” Solder Tails for PCB Retention . . . . . . . . . . . . . . . . . . . 78, 79
IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches,
Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . 80, 81
IDC Low Profile Ejection Style Pin Headers, Center Polarized, .100 x .100
[2.54x2.54]Centerlines ............................................82,83
Universal Ejection Style Pin Headers and Pinless Headers
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-86
Universal Ejection Style Pin Headers, ACTION PIN Contacts, Military,
Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . 87, 88
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines, Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . 89-91
Universal Ejection Style Pinless Headers, Military, Center and Dual Polarized,
.100x.100[2.54x2.54]Centerlines ...................................92,93
Universal Ejection Style Pin Headers, with PCT Housing, .100 x .100
[2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) . . . . . . . . . . . . . . . . 94, 95
Latches for Ejection Style Universal Pin Headers and Pinless Headers . . . . . . . . . . . . . 96
Cable Solutions ......................................................97,98
Part Number Index ......................................................99
8
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable
Ribbon Cable Interconnect Solutions
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Cable-to-Board Connectors
The System 50 Ribbon
Cable connector is a
receptacle connector that
will terminate ribbon cable
on .025 [0.64] centerlines.
It is available in select sizes
from 10 to 100 positions
and will accommodate 30
AWG [0.05 mm2] solid or
stranded and 32 AWG
[0.03 mm2] stranded
conductors with PVC cable
insulation.
The housing and cover
are of a high temperature
tolerant thermoplastic
(black) with a UL 94V-0
rating. A phosphor bronze
single mating beam contact
provides the interconnect
between the conductor and
the .015 [0.38] square posts
on the .050 x .100
[1.27 x 2.54] grid. The
contacts are plated with
30 gold duplex plating. The
latching feature is located
on the receptacle, not the
header, and saves board
space and eliminates future
problems of “latch height
compatibility.”
Product Facts
■Preassembled housing and
cover
■One-step termination
■End and daisy chain
termination
■Positive end latching of
connector to universal
header
■Terminates 30 AWG
[0.05 mm2] solid or
stranded and 32 AWG
[0.03 mm2] stranded
.025 [0.64] centerline
ribbon cable with PVC
insulation
■Connectors are RoHS
compliant
■Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
■Certified by the
Canadian Standards
Association,
File No. LR 7189
R
R
9
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Cable-to-Board Connectors
Double Row Receptacle
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Latches — Stainless steel
Contacts — Phosphor bronze, plated
30 microinch gold over nickel with tin
in termination area
Related Product Data
Mateable Connectors —
See AMP Catalog 82178
See Part Numbers 104068 and 104069
Series on pages 10 and 11
Mates with Posts — .015 [0.38]
square, .125 [3.18] long, on
.050 x .100 [1.27 x 2.54] grid
Technical Documents
Product Specification
108-1109
Application Specification
114-25029
No. of Dimensions
Pos. ABCDEF
Part Number
.510 .445 .225 .200 .096 .294
10 12.95 11.30 5.72 5.08 2.44 7.47 2-111196-5
.610 .545 .325 .300 .146 .394
14 15.49 13.84 8.26 7.62 3.71 10.01 2-111196-6
.660 .595 .375 .350 .171 .444
16 16.76 15.11 9.52 8.89 4.34 11.28 2-111196-7
.760 .695 .475 .450 .221 .544
20 19.30 17.65 12.07 11.43 5.61 13.82 1-111196-8
.860 .795 .575 .550 .271 .644
24 20.32 20.19 14.61 13.97 6.88 16.36 2-111196-8
.910 .845 .625 .600 .296 .694
26 23.11 21.46 15.88 15.24 7.52 17.63 2-111196-9
1.010 .945 .725 .700 .346 .794
30 25.65 24.00 18.42 17.78 8.79 20.17 1-111196-9
1.110 1.045 .825 .800 .396 .894
34 28.19 26.54 20.96 20.32 10.06 22.71 3-111196-0
1.260 1.195 .975 .950 .471 1.044
40 32.00 30.35 34.54 24.13 11.96 26.52 2-111196-0
1.360 1.295 1.075 1.050 .521 1.144
44 34.54 32.89 27.31 26.67 13.23 29.06 3-111196-1
1.510 1.445 1.225 1.200 .596 1.294
50 38.35 36.70 31.12 30.48 15.14 32.87 2-111196-1
1.760 1.695 1.475 1.450 .721 1.544
60 44.70 43.05 37.47 36.83 18.31 39.22 2-111196-2
1.860 1.795 1.575 1.550 .771 1.644
64 47.24 45.59 40.00 39.37 19.58 41.76 3-111196-2
1.960 1.895 1.675 1.650 .821 1.744
68 49.78 48.13 42.55 41.91 20.85 44.30 3-111196-4
2.060 1.995 1.775 1.750 .871 1.844
72 52.32 50.67 45.08 44.45 22.12 46.84 2-111196-3
2.260 2.195 1.975 1.950 .971 2.044
80 57.40 55.75 50.17 49.53 24.66 51.92 3-111196-3
2.760 2.695 2.475 2.450 1.221 2.544
100 70.10 68.45 62.87 62.23 31.01 64.62 2-111196-4
See Application Specification for termination tooling.
Note: All part numbers are RoHS compliant.
.254
[6.45]
.228
[5.79]
.054
[1.37]
.430
[10.92]
.102
[2.59]
.228
[5.80]
.335
[8.51]
.246
[6.25]
.580
[14.73]
Before
Termination
.198
[5.03]
.100
[2.54]
.100
[2.54] .050
[1.27]
F
E
D
A
Cover
Latch
Contact
Housing
T
yp.
Position #1
Indicator
C
B
System 50 Cable-to-Board Connectors,
.025 [0.64] Centerline Ribbon Cable (Continued)
10
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
System 50 Board-to-Board Connectors, Through-Hole Headers
Ribbon Cable Interconnect Solutions
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Board-to-Board Connectors
Shrouded,
Double Row
Vertical
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Contacts — Copper alloy, plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder posts,
with entire contact underplated .000050
[0.00127] nickel
Related Product Data
Mateable Receptacles — page 9
Technical Documents
Product Specification
108-1093
Application Specification
114-25031
No. of Dim. Part
Positions A Number
.380
10 9.65 5-104068-2
.430
12 10.92 5-104068-8
.480
14 12.19 5-104068-9
.530
16 13.46 6-104068-0
.630
20 16.00 5-104068-1
.730
24 18.54 6-104068-1
.780
26 19.81 6-104068-2
.880
30 22.35 5-104068-3
No. of Dim. Part
Positions A Number
.980
34 24.89 6-104068-3
1.130
40 28.70 5-104068-4
1.230
44 31.24 6-104068-4
1.380
50 35.05 5-104068-5
1.630
60 41.40 5-104068-6
1.830
68 46.48 6-104068-8
1.930
72 49.02 6-104068-5
2.130
80 54.10 6-104068-6
2.630
100 66.80 6-104068-7
**Point of measurement for gold thickness.
**Circuit identification feature omitted on 8, 10, 12 and 14
position headers.
Note: All part numbers are RoHS compliant.
.284
[7.21]
.100
[2.54]
.100
[2.54]
.092
[2.34]
.390
[9.91]
A
.015
[0.38]
.344
[8.74]
.060
[1.52]
2Plc.
.055*
[1.40]
.050
[1.27] Typ.
Circuit Identification
Feature**
11
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
System 50 Board-to-Board Connectors, Through-Hole Headers (Continued)
Ribbon Cable Interconnect Solutions
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Board-to-Board Connectors
Shrouded,
Double Row
Right-Angle
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Contacts — Copper alloy, plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder posts,
with entire contact underplated .000050
[0.00127] nickel
Related Product Data
Mateable Receptacles — page 9
Technical Documents
Product Specification
108-1093
Application Specification
114-25031
Circuit Identification
Feature**
.540
[13.72]
.100
[2.54]
.350
[8.89]
.290
[7.37]
.050
[1.27] T
yp.
Note 2
Note 1
.060
[1.52]
2 Plc.
A
.055*
[1.40]
.100
[2.54]
.160 [4.06]
at Post Tips
.100
[2.54]
at Post
Tips
.408
[10.36]
Hold down
post
No. of Dim. Part
Positions A Number
.330
88.38 5-104069-8
.380
10 9.65 5-104069-4
.630
20 16.00 5-104069-1
.730
24 18.54 6-104069-2
.780
26 19.81 6-104069-3
.880
30 22.35 5-104069-5
.980
34 24.89 6-104069-4
No. of Dim. Part
Positions A Number
1.130
40 28.70 5-104069-6
1.380
50 35.05 5-104069-2
1.630
60 41.40 5-104069-7
1.830
68 46.80 6-104069-8
1.930
72 49.02 6-104069-6
2.130
80 54.10 5-104069-3
2.630
100 66.80 6-104069-7
**Point of measurement for gold thickness.
**Circuit identification feature omitted on 8, 10, 12 and
14 position headers.
Notes: 1. Hold down posts located as shown for
16 through 100 position headers.
Notes: 2. Hold down posts located as shown for
8 through 14 and 60 through 100 position
headers.
Notes: 3. All part numbers are RoHS compliant.
12
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable
Ribbon Cable Interconnect Solutions
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Cable-to-Board Connectors
Paddleboard
Material and Finish
Housing — LCP thermoplastic,
UL 94V-0 rated, black
Cover — Polyester, UL 94V-0 rated,
black
Contacts — Phosphor bronze, plated
.000100 [0.00245] min. tin over .000050
[0.00127] min. nickel underplating
Technical Documents
Product Specification
108-1109
Application Specification
114-25040
.024
[0.61]
.118
[3.00]
.040
[1.02] .030
[0.76] Standoffs
(Various Locations)
B
.100
[2.54]
A
.020
[0.51]
.045
[1.19]
Ref.
.050
[1.27]
No. of PCB Dimensions Kinked
Pos. Layout AB Legs
.436 .200
10 1 11.07 5.08 5111595-1
.536 .300
14 1 13.61 7.62 5111595-2
.586 .350
16 2 14.88 8.89 5111595-3
.686 .450
20 2 17.42 11.43 5111595-4
.786 .550
24 2 19.96 13.97 5111595-5
.836 .600
26 1 21.23 15.24 5111595-6
.886 .650
28 2 22.50 16.51 2-5111595-0
.936 .700
30 1 23.77 17.78 5111595-7
1.036 .800
34 1 26.31 20.32 5111595-8
1.186 .950
40 2 30.12 24.13 5111595-9
Typ. .050
[1.27] Typ.
.168
[4.27]
.075
[1.91] T
yp.
.304
[7.72]
.008
[0.20]
Typ.
.340
[8.64]
(Unterminated)
Position 1
Indicator
.273
[6.93]
(Terminated)
.050
[1.27] Typ.
.075
[1.91] Typ.
.304
[7.72]
.031
[0.79] T
yp.
Printed Circuit Board Hole Layout #1
No. of PCB Dimensions Kinked
Pos. Layout AB Legs
1.286 1.050
44 2 32.66 26.67 1-5111595-0
1.336 1.100
46 1 33.93 27.94 1-5111595-7
1.436 1.200
50 1 36.47 30.48 1-5111595-1
1.686 1.450
60 2 42.82 36.83 1-5111595-2
1.786 1.550
64 2 45.36 39.37 1-5111595-3
1.886 1.650
68 2 47.90 41.91 1-5111595-9
1.986 1.750
72 2 50.44 44.45 1-5111595-4
2.186 1.950
80 2 55.52 40.53 1-5111595-5
2.686 2.450
100 2 68.22 62.23 1-5111595-6
See Application Specification for termination tooling.
Note: All part numbers are RoHS compliant.
B
.050
[1.27] Typ.
.075
[1.91] Typ.
.304
[7.72]
.031
[0.79] T
yp.
Printed Circuit Board Hole Layout #2
B
13
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable
Ribbon Cable Interconnect Solutions
.025 [0.64] Centerline Ribbon Cable Connectors
Ultra ATA Bus Connectors
Product Facts
■IDC termination
■Backward compatible with
current IDE Interfaces
■Improved signal integrity:
1 to 1 signal to ground ratio
■Improved crosstalk when
compared to existing IDE
Cable Assembly
■Color coded connectors
for “System board,” and
“Master HDD” and
“Slave HDD”
■Cable impedance 80 ohms
■Up to 3 connectors per cable
assembly
■15 microinches gold plating
■Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
■Certified by the
Canadian Standards
Association,
File No. LR 7189
■Terminates 30 AWG solid or
stranded PVC insulated 80
conductor ribbon cable
R
R
Ultra ATA is the next genera-
tion IDE (Integrated Drive
Electronics) bus. The current
IDE bus has a maximum
data transfer rate of about
16.5 MB/second. As the bus
speeds and disk drive per-
formances increase, the
cable assembly between
the motherboard and hard
drive becomes a limiting
factor in data transfer from
the drive.
The Ultra ATA connector
and cable assembly from
TE provide the customer
with improved electrical
performance by creating a
1:1 signal-to-ground ratio.
The connector design incor-
porates an IDC bus bar to
common the 40 additional
ground signals. The cable is
.025" centerline PVC ribbon
cable. The connector is fully
backward compatible with
existing 40-position headers
with pin 20 removed on
motherboards and disk
drives.
The new connectors are
color coded to identify:
1. system board connector
2. primary or master hard
drive connector
3. slave drive connector
Standard Issues
The Ultra ATA cable per-
formance specification is
part of the Small Form
Factor Committee No. 8049.
Compaq Computer and
Western Digital are the
major sponsors of the
standard.
Contacts Available:
■80 position IDC contact
terminations
■40 signal contacts
■40 ground terminations to
special IDC bus bar
14
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued)
Ribbon Cable Interconnect Solutions
.025 [0.64] Centerline Ribbon Cable Connectors
Ultra ATA Bus Connectors
Ground
Bus Bar
Max.
Signal
Contacts
Contact
Optional Center*
Polarizer Bar
Position 1 Position 1 Position 1
Cover
Odd Gnd
Housing
Pos. No. 1
Indicator
.420
[10.67] .492
[12.50]
Ref.
.610
[15.49]
.240
[6.10]
2.186
[55.52]
1.90
[48.26]
.100
[2.54]
.100
[2.54]
“System” Board
Connector “Slave”
Connector
“Master” or
“Primary”
Connector
Configuration A
“System” Board
Connector
“Slave”
Connector
“Master” or
“Primary”
Connector
Configuration B
Terminated View
Color Coded
Conductor No. 1
Pin 34
Conductor Cut
per SFF-8049
Related Product Data
Strain Relief — Part Number 499252-
1
Mateable Headers — page 15
Material & Finish
Housing and Cover —
Thermoplastic, UL 94 V-0 rated, color
per table
Contacts — Phosphor bronze, plated
gold per table on mating end, .000050
[0.00127]min. tin in wire termination
area, over .000050 [0.00127] min nickel
on entire contact.
Technical Documents
Product Specification
108-1740
Application Specification
114-40056
See Application Specification for
termination tooling.
Accessories
Strain Relief — page 68
Keying Plug — page 64
Pull Loops — page 66
Pull Tabs — page 63
Circuit 20
Molded Shut
*Center & Military Polarized Military Polarized
Connector Type 15µ" Gold Housing Cover 15µ" Gold Housing Cover
Color Color Color Color
“System” Board 1658619-2 Blue Black 1658618-2 Blue Black
“Primary” or “Master” 1658619-1 Black Black 1658618-1 Black Black
“Slave” 1658619-3 Gray Black 1658618-3 Gray Black
Notes: 1. All connectors are “ODD GROUND” configuration, ie. all odd cable conductors are grounded. “EVEN GROUND” connectors are not available.
See Customer Drawings for detailed electrical connection descriptions.
2. All part numbers are RoHS compliant.
15
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued)
Ribbon Cable Interconnect Solutions
.025 [0.64] Centerline Ribbon Cable Connectors
Ultra ATA Bus Connectors
Universal Headers — Pin 20 Omitted
Post Housing Latch Part Contact Finish Solder Tail Comments
Type Material Type Number (Plating Code) Length
Vertical Nylon or PBT Long 5111824-9 D .110
2.79
Vertical Nylon or PBT Short 6489700-1 B .123 PP
3.12
Legend: PP — Polarization Peg
Ultra ATA
Compatible Headers
Low Profile Headers — Pin 20 Omitted
Post Housing Latch Part Contact Finish Solder Tail Housing
Type Material Type Number (Plating Code) Length Color
Vertical Nylon None 1888188-1 A .120 Black
3.05
Vertical Nylon None 1888188-2 B .120 Black
3.05
Vertical Nylon 6T None 2-1734161-4 C .122 Black
3.10
Vertical Nylon 6T None 2-1734161-5 C .122 Blue
3.10
Vertical Nylon None 1734162-2 C .110 Black
2.79
Vertical Nylon None 1734162-4 C .110 Blue
2.79
Plating Code A — Duplex plated, gold flash on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire
post underplated .000050 [0.00127] min. nickel.
Plating Code B — Duplex plated, gold flash over palladium-nickel, .000015 [0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel or .000015
[0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated
.000050 [0.00127] min. nickel.
Plating Code C — Gold flash over nickel underplate on entire post.
Plating Code D — Duplex plated, gold flash over palladium-nickel, .000030 [0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel or .000015
[0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated
.000050 [0.00127] min. nickel.
Note: All part numbers are RoHS compliant.
16
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
2.0 mm [.079] Receptacle Connectors
Ribbon Cable Interconnect Solutions
METRIC
Dimensions are
millimeters over inches
.039 [1.00] Centerline Ribbon Cable Connectors
.079 [2.00] Receptacle Connectors
Product Facts
■True hard metric 2.0 x 2.0
[.079 x .079] mating grid for
1.0 [.039] pitch ribbon cable
■Wide selection of
configurations, 8-50
positions
■Insulation displacement
(IDC), beryllium copper
contacts, duplex plated
gold-over-nickel
■Top/bottom single beam
contact orientation
■UL 94V-0 rated thermo-
plastic components
■Assemblies are furnished
preassembled with
termination covers
■Optional polarization
■Optional strain relief
available
■Connector assemblies
packaged for ease of
handling and protection
■Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
■Certified by the
Canadian Standards
Association,
File No. LR 7189
Performance Data
Durability — 150 cycles
Termination Resistance —
25 milliohms max.
Mating Force —
1.67 N max. per contact
Unmating Force —
0.14 N min. per contact
Operating Temperature —
-65°C to +105°C
Technical Documents
Product Specification
108-1372
Application Specification
114-40038
R
R
The 2.0 [.079] receptacle
connector family features
contacts on a true 2.0 x 2.0
[.079 x .079] mating grid
for 1.0 [.039] pitch 28 AWG
ribbon cable. A variety of
configurations are available
from 8 through 50 positions.
This small, compact
connector is finding wide
acceptance throughout the
electronic industry, particu-
larly in the smaller laptop
and notebook type comput-
ers with 63.5 [2.5] drives.
Other areas of application
include point-of-sale termi-
nals, fax machines, photo-
copiers, printers, consumer
electronics, and other com-
puter peripheral equipment.
These receptacles feature
insulation displacement
contacts (IDC) with a
top/bottom single-beam
contact orientation.
Contacts are beryllium
copper, duplex plated
0.00076 [.000030] gold
in the mating area and
0.00254 [.000100] min.
tin on termination end, all
over 0.00127 [.000050]
nickel underplating. Contact
mating area is 1.54 [.061]
from the face of the housing
and they accept 0.50mm
[.0197] round or square
posts.
Housings are made of
UL 94V-0 rated polyester
with optional center bar
polarization. Complete
assemblies are furnished
preassembled with termina-
tion covers. The complete
assembly presents a com-
pact design only 5.2 [.203]
wide over the termination
cover by 4 [.157] deep by
4 [.157] wide mating end.
Terminated height is 8.48
[.334]. Optional strain relief
available. Assemblies are
packaged for ease of
handling and protection.
17
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
METRIC
Dimensions are
millimeters over inches
.039 [1.00] Centerline Ribbon Cable Connectors
.079 [2.00] Receptacle Connectors
2.0 mm [.079] Receptacle Connectors,
Non-Polarized and Center Polarized Bar
Material and Finish
Housing and Termination Cover —
UL 94V-0 rated polyester, black
Contacts — Beryllium copper, duplex
plated 0.00076 [.000030] min. gold on
mating end, 0.00013 [.000005] min.
gold on termination end, all underplated
0.00127 [.000050] min. nickel
Note: Accepts 0.08-0.09mm2[28 AWG]
ribbon cable, PVC insulated 1.00 [.039]
pitch. See Application Specification for
details.
Technical Documents
Product Specification
108-1372
Application Specification
114-40038
Mateable Connectors — pages 9
and 12, or see Application Specification
for header requirements
Accessories
Pull Loops — page 66
Keying Plugs — page 64
Strain Relief — page 68
8.48
[.334]
5.16
[.203]
A
2.00
[.079]
Typ.
2.00
[.079]
Typ.
1.90 ± 0.05
[.075 ± .002]
10.24
[.403]
4.000
[.1575]
B
Position Number
1 Indicator
Position Number 1
Terminated View, Typical
Optional Center Polarizer Bar
1.54
[.061]
5.00
[.197]
No. of Dimensions Center Non-Polarized
Positions AB
Polarized
813.18 8.41 3-111623-0 2-111626-4
.519 .331
10 15.16 10.41 1-111623-8 1-111626-7
.597 .410
12 17.15 12.40 3-111623-1 —
.675 .488
14 19.18 14.40 1-111623-9 1-111626-8
.755 .567
16 21.18 16.41 2-111623-0 2-111626-5
.834 .646
20 25.17 20.40 2-111623-1 1-111626-9
.991 803
22 27.18 22.40 2-111623-9 —
1.070 .882
24 29.18 24.41 2-111623-7 2-111626-6
1.149 .961
26 31.17 26.42 2-111623-2 2-111626-7
1.227 1.040
30 35.18 30.40 2-111623-3 —
1.385 1.197
34 39.17 34.42 2-111623-8 2-111626-0
1.542 1.355
40 45.19 40.41 2-111623-4 2-111626-1
1.779 1.591
44 49.17 44.40 2-111623-5 2-111626-2
1.936 1.748
50 55.17 50.39 2-111623-6 2-111626-3
2.172 1.984
Note: All part numbers are RoHS compliant.
18
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
AMPMODU 50/50 Grid Connector System
Ribbon Cable Interconnect Solutions
Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request.
Vertical Headers,
Board-to-Board
(Page 21)
Vertical Headers,
Board-to-Board
(Page 21)
Right-Angle Headers,
Board-to-Board (Page 24)
Vertical Headers,
Board-to-Board
(Page 21):
.250 [6.35] Stack Height
.320 [8.13] Stack Height
.390 [9.91] Stack Height
Vertical Receptacles,
Board-to-Board
(Page 20)
Vertical Receptacles,
Board-to-Board
(Page 20)
Receptacles,
Cable-to-Board,
With Latch
(Page 26)
Receptacles,
Cable-to-Board
Without Latch
(Page 26)
ISO
Certified
9001
Board-to-Board Vertical
Receptacles and Headers
19
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Board-to-Board Vertical Receptacles and Headers
Ribbon Cable Interconnect Solutions
Product Facts
■Surface-mount products for
parallel board-to-board
applications, as well as
right-angle board-to-board
and cable-to-board
applications
■High density .050 x .050
[1.27x1.27] centerline grid
■Three board-to-board stack
heights: .250 [6.35], .320
[8.13] and .390 [9.91]
■Non-protrusive metallic
holddowns
■Reliable dual beam
receptacle contacts for
redundant contact
■Duplex plated receptacle
and post contacts; gold
plated on mating areas,
tin plated on tails
■Compatible with standard
surface-mount processing
(VPR and IR)
■Receptacle and header allow
for drainage of
processing fluids
■Tape and reel packaging
available. Contact
TE for details
■Polarized header and
receptacle assemblies
■Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by
Canadian Standards
Association
File No. LR7189
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
for parallel board-to-board
stacking in high density
applications.
Right-angle board-to-board
and cable-to-board
applications are also
possible, since the vertical
receptacles also mate with
non-latching right-angle
headers (page 24) and the
vertical headers also mate
with non-latching cable
connectors.
Available are double row,
vertical shrouded headers
and receptacles in sizes
ranging from 10 through
100 positions (in 10 position
increments).
Parallel board-to-board
stack heights of .250 [6.35],
.320 [8.13] and .390 [9.91]
are achievable by selection
of the appropriate header.
The receptacle is the same
for all three stack height
headers.
Non-protrusive metallic
holddowns are designed for
use in .062 [1.57] or thicker
PC boards and allow
surface mounting to both
sides of the board. In
addition to providing
retention during processing,
the holddowns are soldered
during reflow and therefore
provide
long-term strain relief for
the solder joints.
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
to be compatible with
standard surface-mount
processes; IR (infrared) and
VPR (vapor phase reflow).
The surface-mount
connectors have been
designed so that
dimensioning, tolerances,
referenced datums,
holddown characteristics
and packaging methods
result in a system that is
compatible with robotic
assembly.
The headers and receptacles
feature polarization to
prevent misalignment.
Three Board Stack Heights
Non-Protrusive
Metallic Holddowns
.250±.006
[6.35±0.15]
.320±.006
[8.13±0.15]
.390±.006
[9.91±0.15]
R
R
Board-to-Board Vertical
Receptacles and Headers
20
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Board-to-Board Vertical Receptacles, Double Row, .050 x .050
[1.27 x 1.27] Centerline
Vertical Receptacles, Double Row
Note: All part numbers are RoHS compliant.
Material and Finish
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Related Product Data
Mating Headers — pages 21 and 24
PC Board Layouts — page 22
Performance Specifications —
page 29
Technical Documents — page 29
Product Specification 108-1332
Application Specification
114-7010
Packaging — Tube or Tape and Reel
No. of Dimension Receptacle
Pos. A Part Numbers
Tube Tape and Reel* No Hold Down w/Vacuum Cover
10 .266 [6.75] 5-104652-1 5-147384-1 5-147413-1
20 .516 [13.11] 5-104652-2 5-147384-2 5-147413-3
30 .766 [19.46] 5-104652-3 5-147384-3 5-147413-4
40 1.016 [25.81] 5-104652-4 5-147384-4 —
50 1.266 [32.16] 5-104652-5 5-147384-5 5-147413-2
60 1.516 [38.51] 5-104652-6 5-147384-6 —
70 1.766 [44.86] 5-104652-7 5-147384-7 —
80 2.016 [51.21] 5-104652-8 5-147384-8 —
100 2.516 [63.91] 6-104652-0 5-147384-9 —
* Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 22.
Polarizing Tab
(For Polarization to
Mating Header)
A.028
[0.71]
.187
[4.75]
.120
[3.05]
.050
[1.27]
.050
[1.27]
.050
[1.27]
21
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Board-to-Board Vertical Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
Vertical Headers, Double Row
Note: All part numbers are RoHS compliant.
Material and Finish
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Related Product Data
Mating Receptacles — pages 20 and
26 (without latch only)
PC Board Layouts — page 22
Performance Specifications
— page
29
Technical Documents — page 29
Product Specification 108-1332
Application Specification
114-7010
Packaging — Tube or Tape and Reel
Header Part Numbers
No. of Dimension .250 [6.35] Mated Height .320 [8.13] Mated Height .390 [9.91] Mated Height
Pos. A Tubes Tape & Reel* Tubes Tape & Reel* Tubes Tape & Reel*
Hold Down No Hold Down Hold Down No Hold Down
10 .372 [9.44] 5-104655-1 5-147381-1 5-147121-1 5-104656-1 5-147382-1 5-104693-1 — 5-147383-1
20 .622 [15.79] 5-104655-3 5-147381-2 5-147121-2 5-104656-2 5-147382-2 5-104693-2 — 5-147383-2
30 .872 [22.14] 5-104655-4 5-147381-3 — 5-104656-3 5-147382-3 5-104693-3 — 5-147383-3
40 1.122 [28.49] 5-104655-5 5-147381-4 — 5-104656-4 5-147382-4 5-104693-4 — 5-147383-4
50 1.372 [34.84] 5-104655-6 5-147381-5 — 5-104656-5 5-147382-5 5-104693-5 — 5-147383-5
60 1.622 [41.19] 5-104655-7 5-147381-6 — 5-104656-6 5-147382-6 5-104693-6 — 5-147383-6
70 1.872 [47.54] 5-104655-8 5-147381-7 — 5-104656-7 5-147382-7 5-104693-7 — 5-147383-7
80 2.122 [53.89] 5-104655-9 5-147381-8 — 5-104656-8 5-147382-8 5-104693-8 — 5-147383-8
90 2.372 [60.24] ———5-104656-9 — 5-104693-9 ——
100 2.622 [66.59] 6-104655-1 5-147381-9 — 6-104656-0 5-147382-9 6-104693-0 5-147503-1 5-147383-9
*Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 22.
For .250 [6.35] Mated Height
For .320 [8.13] Mated Height
For .390 [9.91] Mated Height
.050
[1.27]
.050
[1.27]
.050
[1.27]
.030
[0.76]
.030
[0.76]
.050
[1.27]
.2255
[5.728]
.225
[5.71]
.2975
[7.557]
.3675
[9.335]
A
A
A
.030
[0.76]
.050
[1.27]
22
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Recommended PC Board Layouts for Vertical Connectors
Ribbon Cable Interconnect Solutions
Recommended PC Board Layouts
No. of Receptacle Dimensions Header Dimensions
Pos. BC D BC D
10 4 .200 [5.08] .320 [8.12] 4 .200 [5.08] .322 [8.17]
20 9 .450 [11.43] .570 [14.48] 9 .450 [11.43] .572 [14.52]
30 14 .700 [17.78] .820 [20.83] 14 .700 [17.78] .822 [20.87]
40 19 .950 [24.13] 1.070 [27.19] 19 .950 [24.13] 1.072 [27.22]
50 24 1.200 [30.48] 1.320 [33.53] 24 1.200 [30.48] 1.322 [33.57]
60 29 1.450 [36.83] 1.570 [39.88] 29 1.450 [36.83] 1.572 [39.92]
70 34 1.700 [43.18] 1.820 [46.23] 34 1.700 [43.18] 1.822 [46.27]
80 39 1.950 [49.53] 2.070 [52.58] 39 1.950 [49.53] 2.072 [52.62]
90 44 2.200 [55.88] 2.320 [58.93] 44 2.200 [55.88] 2.322 [58.97]
100 49 2.450 [62.23] 2.570 [65.28] 49 2.450 [62.23] 2.572 [65.32]
D
D
.029
[0.74]
BSpaces at .050 [1.27] = C
BSpaces at .050 [1.27] = C
C of Pattern
Detail A
Detail A
C of Pattern
.061
[1.54]
.050
[1.27]
.162
[4.11]
.182
[4.62]
.091
[2.31]
.110
[2.79]
.050
[1.27]
.060
[1.52]
.065
[1.65]
.130
[3.30]
.029
[0.74]
L
L
Headers
Receptacles
Note: Refer to TE Customer
Drawings for additional PC board
layout information and dimensional
tolerances.
.047
[1.19]
2 Plc.
.010
[0.25]
4 Plc.
Detail A
23
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Board-to-Board Right-Angle Headers
Ribbon Cable Interconnect Solutions
Board-to-Board Right-Angle Headers
AMPMODU 50/50 Grid
Right-Angle Headers will
accommodate a variety of
high density packaging
applications; right-angle
board-to-board applications
when mated with vertical
receptacles (page 20) and
right-angle cable-to-board
applications when mated
with cable connectors
(page 26). The small
.050 x .050 [1.27 x 1.27]
centerline contact spacing
allows efficient use of the
PC board area.
Mechanical support of the
headers to the PC board is
provided by non-protrusive
metallic holddowns
designed for .062 [1.57] or
thicker PC boards. These
holddowns are of the same
design as those used in the
vertical headers (page 21)
and receptacles (page 20).
There are also metallic tabs
that are soldered to the sur-
faces of the PC board pads
for added support.
AMPMODU 50/50 Grid
Right-Angle Headers are
available in double-row, in
either latching or non-
latching versions, and in
sizes ranging from 10
through 100 positions (in 10
position increments). The
latching version provides
positive retention when
mated with the latching
cable connector (page 26).
All headers feature polariza-
tion to help prevent mis-
alignment during mating.
Product Facts
■Surface-mount products for
right-angle board-to-board
and cable-to-board
applications
■Double-row, right-angle
shrouded headers
■High density .050 x .050
[1.27 x 1.27] centerline grid
■Latching and non-latching
versions available
■Non-protrusive metallic
holddowns
■Metallic tabs, when
soldered to PC board pad,
provide added mechanical
support
■Duplex plated post contacts;
gold plated on mating area,
tin plated on tails
■Compatible with standard
surface-mount processing
(VPR and IR)
■Standoffs on header
housings allow for drainage
of processing fluids
■All headers are polarized
■Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association
File No. LR7189
R
R
24
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Board-to-Board Right-Angle Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
Right-Angle Headers, Double Row,
Latching and Non-Latching
Note: All part numbers are RoHS compliant.
Material and Finish
Housing — Liquid crystal polymer,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.000381] tin on
solder tail, with entire contact under-
plated .000050 [0.00127] nickel
Holddown — Copper alloy; plated
.0000150 [0.00381] tin over .000050
[0.00127] nickel
Related Product Data
Mating Receptacles — pages 20
and 26
Performance Specifications
—
page 29
Technical Documents — page 29
Product Specification 108-1443
Application Specification
114-7010
Packaging
—
Tube
Recommended PC Board Layout
No. of Dimensions Header
Pos. Part Numbers
ABC D Latching Non-Latching
10 .630 [16.00] 9 .225 [5.72] .550 [13.97] 5-104895-1 5-104894-1
20 .880 [22.35] 19 .475 [12.07] .800 [20.32] 5-104895-2 5-104894-2
30 1.130 [28.70] 29 .725 [18.42] 1.050 [26.67] 5-104895-3 5-104894-3
40 1.380 [35.05] 39 .975 [24.77] 1.300 [33.02] 5-104895-4 5-104894-4
50 1.630 [41.40] 49 1.225 [31.12] 1.550 [39.37] 5-104895-5 5-104894-5
60 1.880 [47.75] 59 1.475 [37.47] 1.800 [45.72] 5-104895-6 5-104894-6
70 2.130 [54.10] 69 1.725 [43.82] 2.050 [52.07] 5-104895-7 5-104894-7
80 2.380 [60.45] 79 1.975 [50.17] 2.300 [58.42] 5-104895-8 5-104894-8
100 2.880 [73.15] 99 2.475 [62.87] 2.800 [71.12] 6-104895-0 6-104894-0
A
.430
[10.92]
.340
[8.64] .305
[7.75]
BSpaces at
.025 =C
[0.64]
.085
[2.16]
.140
[3.56]
.175
[4.45]
D
.100
[2.54]
Min
.063
[1.57]
(2 Plc)
.190
[4.83]
(2 Plc)
.047 Dia
[1.19]
Plated-Thru Hole
(2 Plc)
.136
[3.45]
(2 Plc)
.050
[1.27]
.352
[8.94]
.213
[5.41]
.050
[1.27]
.050
[1.27]
Typ.
.029
[0.74]
Typ
.065
[1.65]
Typ.
Note: Refer to TE Customer
Drawings for additional PC board
layout information and dimensional
tolerances.
Non-Latching Header
Latching Header
25
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Cable-to-Board Connectors
Cable-to-Board Connectors
Product Facts
■Double-row receptacle
connectors provide cable-
to-board connection
capabilities for vertical
headers (non-latching) and
right-angle headers
(latching and non-latching)
■IDC (Insulation
Displacement Crimp) mass
termination of solid or
stranded round conductor
.050 [1.27] centerline
ribbon cable with PVC or
polyethylene insulation
■Accommodates ribbon cable
conductor sizes of 28 AWG
[0.08-0.09 mm2] and 30
AWG [0.05 mm2] and
insulation diameters up to
.036 [0.91] maximum
■Reliable single beam
receptacle contact design
■Duplex plated receptacle
contacts; gold plated in
mating area, tin in
termination area
■Terminating covers (sold
separately) provide both
strain relief and protection
to the termination area
■Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■Connectors available with or
without metal latch
■Connectors without latches
are polarized to help
prevent mismating
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association
File No. LR7189
These double-row cable
connectors, with a .050 x
.050 [1.27 x 1.27] centerline
contact spacing, provide
cable-to-board connection
capabilities for the
AMPMODU 50/50 Grid
Connector System. Cable
connectors without a latch
will mate with the vertical
headers (page 21), while
cable connectors with or
without a latch can be used
to mate with the right-angle
headers (page 24).
The cable connectors
feature reliable single-
beam IDC (insulation
displacement crimp)
contacts which are duplex
plated with .000030
[0.00076] gold. These
contacts can be mass
terminated to either solid or
stranded round conductor
ribbon cable with conductor
sizes of 28 AWG [0.08-0.09
mm2] and 30 AWG [0.05
mm2] and a maximum
insulation diameter of .036
[0.91]. During termination,
the terminating covers,
which must be purchased
separately, assist in guiding
the wire into the IDC
contacts, then provide
strain relief when fully
seated. Actual termination
is accomplished with the TE
manual tooling shown on
page 28.
The latching version of
the cable connector is
equipped with a metal latch
which provides positive
retention of the receptacle
cable connector when
mated with a surface-
mounted right-angle header.
The cable connector without
a metal latch features
polarization to help prevent
mismating. All connectors
are available in sizes
ranging from 10 through
100 positions (in 10 position
increments).
R
R
26
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Cable-to-Board Receptacle Connectors, Double Row, .050 x .050
[1.27 x 1.27] Centerline
Receptacle Connectors, Double Row,
With and Without Latch
Note: All part numbers are RoHS compliant.
Material and Finish
Housing — Thermoplastic, black,
94V-0 rated
Latch — Stainless steel
Contacts — Phosphor bronze; duplex
plated .000030 [0.00076] minimum
gold in mating area, .000150 [0.00381]
minimum tin on solder tail, with entire
contact underplated .000050 [0.00127]
minimum nickel
Related Product Data
Mating Headers — pages 21 and 24
(latching)
Terminating Covers (Must be
Purchased Separately, 2 Required
per Connector) — page 27
Termination Tooling — page 28
Performance Specifications —
page 29
Technical Documents — page 29
Product Specification 108-1443
Application Specification
408-9817, 408-9909
Packaging — Tube
A
No. of Dimensions Receptacle
Pos. Part Numbers
ABC DWith Latch Without Latch
10 .578 [14.68] 4 .200 [5.08] .266 [6.76] 5-104892-1 5-104893-1
20 .828 [21.03] 9 .450 [11.43] .516 [13.11] 5-104892-2 5-104893-2
30 1.078 [27.38] 14 .700 [17.78] .766 [19.46] 5-104892-3 5-104893-3
40 1.328 [33.73] 19 .950 [24.13] 1.016 [25.81] 5-104892-4 5-104893-4
50 1.578 [40.08] 24 1.200 [30.48] 1.266 [32.16] 5-104892-5 5-104893-5
60 1.828 [46.43] 29 1.450 [36.83] 1.516 [38.51] 5-104892-6 5-104893-6
70 2.078 [52.78] 34 1.700 [43.18] 1.766 [44.86] 5-104892-7 5-104893-7
80 2.328 [59.13] 39 1.950 [49.53] 2.016 [51.21] 5-104892-8 5-104893-8
100 2.828 [71.83] 49 2.450 [62.23] 2.516 [63.91] 6-104892-0 6-104893-0
.280
[7.11]
.627
[15.94] .690
[17.56]
D
.120
[3.05]
BSpaces at
.050 [1.27] = C
.284
[7.21]
.327
[8.31]
.050
[1.27]
.050
[1.27]
Typ
27
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Terminating Covers for Cable Connectors
Cable Conncetor Terminating Cover,
Double Row
Note: All part numbers are RoHS compliant.
Material
Glass-filled thermoplastic,
black, 94V-0 rated
Related Product Data
Connectors used with Covers —
page 26
Termination Tooling — page 28
Technical Documents — page 29
Product Specification 108-1443
Application Specification
408-9817, 408-9909
Packaging — Plastic bag
No. of Dimension Terminator Cover
Pos. A Part Numbers
10 .565 [14.35] 104891-1
20 .815 [20.70] 104891-2
30 1.065 [27.05] 104891-3
40 1.315 [33.82] 104891-4
50 1.565 [39.75] 104891-5
60 1.815 [46.10] 104891-6
70 2.065 [52.45] 104891-7
80 2.315 [58.80] 104891-8
100 2.815 [71.50] 1-104891-0
Note: Terminating covers must be purchased separately, two are required for
each cable connector.
.277
[7.04]
.191
[4.85]
A
28
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Application Tooling for Cable Connectors
IDC (Insulation Displacement Crimp) Tooling
Note: All part numbers are RoHS compliant.
Manual Miniature Application Frame Assembly 91295-1
with Cover Closing Kit 543518-1
The Manual Miniature
Application Frame
Assembly 91295-1,
equipped with a Cover
Closing Kit 543518-1, is
used for the IDC termina-
tion of ribbon cable to the
cable connectors shown on
page 26.
Prior to termination, the
covers must be partially
assembled onto a connec-
tor housing, the cable
inserted between the cov-
ers and contacts and the
covers preclosed by hand,
clamping the cable in
place.
In the Manual Miniature
Application Frame
Assembly, the covers are
fully seated to complete the
mass termination and pro-
vide strain relief for the
completed connection.
For tooling information, call
Technical Support Center
1-800-522-6752.
Note: Refer to TE Instruction
Sheets 408-9817 (Frame Assembly
91295-1) and 408-9909 (Cover
Closing Kit 543518-1) for complete
termination/tooling information.
29
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Performance Specifications
Performance Specifications/
Technical Documents
Note: All part numbers are RoHS compliant.
Board-to-Board Connectors, Vertical and Right-Angle
Mating Force — 6.4 oz (1.78 N] max. per contact
Unmating Force — 1.0 oz [0.28 N] min. per contact
Durability — Tested to 200 cycles min.
Current Rating — (30°C T rise): .5 ampere per contact
Operating Temperature Range — -65°C to +105°C
Termination Resistance — 16 milliohms max. (initial)
Insulation Resistance — 5000 megohms min. (initial)
Dielectric Withstanding Voltage — 300 VAC
Cable-to-Board Connectors
Mating Force — 6.4 oz (1.78 N] max. per contact
Unmating Force Without Latch — .5 oz [0.14 N] min. per contact
Durability — Tested to 200 cycles min.
Current Rating — (10°C T rise); .5 ampere per contact
Operating Temperature Range — -65°C to +105°C
Termination Resistance — 25 milliohms max. (initial and final)
Insulation Resistance — 5000 megohms min. (initial)
Dielectric Withstanding Voltage — 300 VAC
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-1332 AMPMODU 50/50 Grid Vertical Board-to-Board Connectors
108-1443 AMPMODU 50/50 Grid Right-Angle Board-to-Board and Cable
Connectors
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-7010 AMPMODU 50/50 Grid Connector System
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-9817 Manual Miniature Application Frame Assembly 91295-1
408-9909 Cover Closing Kit 543518-1
30
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System
Micro-MaTch Miniature Connector System
Miniaturization and the
trend towards higher den-
sity of electronic functions
on a substrate led to the
introduction of smaller
interconnection systems.
The Micro-MaTch connector
family, with it’s contact
spacing of 1.27 mm, fully
complies with the electronic
packaging requirements of
today and the future. The
system offers a range of
board and wire connectors,
enabling a variety of wire-to-
board and board-to-board
interconnections.
The Micro-MaTch contact
concept shown on this page
is essentially different from
other systems available.
By its design the traditional
failure mode in tin plated
connections, fretting corro-
sion, is prevented. Due to
an additional positioning
spring in the female part,
relative movements caused
by vibrations/thermal
expansion between male
and female contacts are
absorbed. By preventing
movements on the contact
spot, a gas tight connection
can be guaranteed under
all circumstances.
The contact spring is
located in the board con-
nector and not in the cable
connector, which is usually
the case. The counter part,
incorporated in the cable
connector, is a simple pin,
either with an insulation dis-
placement section, suitable
for the mass-termination of
cable or with a kinked sol-
der leg to be soldered onto
a PC Board. The separation
of these two basic functions
of the contact system —
contact force generation
and wire termination —
enables the independent
optimization of both func-
tions and also leads to
relatively simple contact
shapes.
Because of their shapes
contacts can be post-
plated, leaving no bare
edges in the contact and
wire slot area. The contact
spring system features an
additional spring member —
the positioning spring —
which compensates posi-
tional tolerances. In this way
the contact spring can be
fully optimized for its basic
function, so that the rela-
tively high contact force,
required for tin plated
contact systems, can be
guaranteed under all
circumstances.
The Micro-MaTch contact
spring system is absolutely
fretting corrosion proof by
its design.
Features/ Benefits
■Available in 2 to
20 positions
■Applicable Wire:
20~28 AWG
■Wire connectors supplied
on-tape and suitable for
mass termination of
28 AWG [0.08 mm2to
0.09 mm2] ribbon cable
■Tin plated contact design
■Guaranteed minimum
contact force of 2.0 N
■Fretting corrosion proof
thanks to additional
positioning spring
member
■Full range of application
tooling from hand tool to
fully automated equipment
1. Contact Pin
2. Contact Spring
3. Positioning
1
2
3
31
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Overview Technical Data
Micro-MaTch Miniature Connector System
Overview Technical Data
Technical Data
Centerline: 1.27 mm (staggered)
Number of Positions: 4, 6, 8, 10, 12, 14, 16, 18, 20, and some 24 positions
Contact Material: Phosphor bronze
Contact Finish: Tin over Nickel
Housing Material: Thermoplastic polyester, red, glass-filled
For surface mount versions polyamide 4.6
Flammability rating: per UL 94 V-0
UL-recognized: File E28476 Vol. 23 Section 4
Contact Resistance: 10 MΩmax.
Insulation Resistance: 1.000 MΩmin.
Nominal Voltage: 230 V
Current Rating: 1.5 A max.
Temperature Range: -40° C to +105° C (operating)
Mating Force: 5N max. per contact
Unmating Force: 1N min. per contact
Minimum Contact Force: 2N min.
Product Specification: 108-19052
Application Specification: 114-19016, 114-19051
RoHS Compliance Code: Always RoHS compliant (directive 2002/95/EC) for all types
Lead-free Process Capable: Wave solder capable to 265° C for through hole versions
reflow solder capable to 260° C for SMD versions
PC Board Connectors
PC Board Thickness: 1.6 mm nominal
PC Board Hole Diameter: 0.8 mm for solder connectors
Ribbon Connectors
Cable Type: Ribbon cable, UL Style 2651
Conductor Spacing: 1.27 mm (.050")
Conductor Diameter: Solid 0.30 mm diameter Stranded 0.08 mm2
7 x 0.12 - 0.13 mm (other diameters and/or configurations
on request)
Insulation Type: semi-rigid PVC
Insulation Diameter: 0.9 ± 0.1 mm
Discrete Wire (COSI) Connectors
Cable Type : AWG 28-24 and 24-20
32
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Applications (3 Dimensions)
Micro-MaTch Miniature Connector System
Applications (3 Dimensions)
Female Connectors
Male Connectors
Female Top Entry
Part Number 215079
Male-on-Wire
Part Number 215083
Male-on-Board
Part Number 215464
COSI
Part Number 338095
Part Number 338096
Part Number 338097
Paddle Board
Part Number 215570
Female Side Entry
Part Number 215460
SMD Top Entry
Part Number 188275
123
4 5/6 7
8910
Image Description (see also page 33)
1 Wire-to-Board through hole
2 Board-to-Board through hole
3 Wire-to-Board (discrete wire), through hole
4 Wire-to-Board right angle, through hole
5 Board-to-Board right angle, through hole
6 Board-to-Board right angle, through hole
7 Wire-to-Board right angle (discrete wire), through hole
8 Wire-to-Board surface mount
9 Board-to-Board surface mount, through hole
10 Wire-to-Board (discrete wire), surface mount
33
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Applications (2 Dimensions)
Micro-MaTch Miniature Connector System
Applications (2 Dimensions)
B
A
C
A
C
B
C
A
B
C
A
B
C
D
A
E
B
C
D
A
B
D
A
C
B
D
A
B
D
AC B
C
G
E
CB
A
C
D
F
Female Top Entry
Part Number 215079
Male-on-Wire
Part Number 215083
Male-on-Board
Part Number 215464
COSI
Part Number 338095
Part Number 338096
Part Number 338097
Paddle Board
Part Number 215570
Female Side Entry
Part Number 215460
SMD Top Entry
Part Number 188275
123
4
5
7
6
8910
Female Connectors
Male Connectors
Dimensions (mm)
Image A (max) B (max) C D (max) E (max) F(max) G (max)
1 5.2 7.5 2.54 ————
2 5.2 6.2 2.54 ————
3 5.2 9.7 2.54 ————
4 8.4 5.9 2.54 1.5 ———
5 5.2 5.9 2.54 1.5 7.0 1.6 —
6 5.2 5.9 2.54 1.5 — — 2.8
7 5.2 5.9 2.54 1.5 10.6 ——
8 5.2 8.5 — 7.1 ———
9 5.2 7.1 2.54 7.1 ———
10 5.2 10.7 — 7.1 ———
34
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Female-on-Board Connector, Top Entry
Micro-MaTch Miniature Connector System —
Female-on-Board Connector, Top Entry
This connector version
incorporates the patented
Micro-MaTch contact spring
system and is designed to
be soldered onto PC
Boards with a nominal thick-
ness of 1.6 mm.
The solder legs are
indented, providing firm
retention of the connector
before and during the
soldering operations.
As polarization is accom-
plished directly between the
Micro-MaTch male connec-
tors and the PC Board, this
top entry female connector
does not have any polariz-
ing features. Therefore, the
orientation of the connector
on the PC Board is irrele-
vant.
1.5
[.059]
1.27
[.050]
A
BMax.
3.1
[.122]
1.9
[.074]
4.0
[.157]
5.1
[.200] Max.
2.54
[.100]
2.54
[.100]
1.27
[.050]
1.40
[.055] 1.80
[.071]
1.50
[.059]
0.80
[.031]
Hole for
Polarization Pin
Typical Hole Pattern
Not Solder SideShown
No. of Positions Dimensions (mm) Part Numbers
A B 2500 Connectors/Reel 250 Connectors/Box
4 3.81 7.1 215079-4 7-215079-4
6 6.35 9.7 215079-6 7-215079-6
8 8.89 12.2 215079-8 7-215079-8
10 11.43 14.7 1-215079-0 8-215079-0
12 13.97 17.3 1-215079-2 8-215079-2
14 16.51 19.8 1-215079-4 8-215079-4
16 19.05 22.4 1-215079-6 8-215079-6
18 21.59 24.9 1-215079-8 8-215079-8
20 24.13 27.4 2-215079-0 9-215079-0
Notes:
1. Connectors are always sideways mounted onto an adhesive tape.
2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm.
3. At additional charge a special packaging option is available: 250 connectors on
a reel with a diameter of 250 mm, packed in a dedicated dispenser box.
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
METRIC
Dimensions are
millimeters over inches
35
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Female-on-Board Connector, Side Entry
Micro-MaTch Miniature Connector System —
Female-on-Board Connector, Side Entry
This connector version is
identical to the top entry
version with two exceptions:
■The solder legs are
parallel to the mating
face of the connector
instead of perpendicular.
■It's housing is polarized,
so that polarization is
accomplished directly
between the two mating
connectors. Proper
orientation of the
connectors on the PC
Board is relevant here.
0.90
[.039]
1.27
[.050]
2.54
[.100]
3.85
[0.15] 2.54
[0.09]
5.8
[0.23]
3.1
[0.12]
B
Max.
A
5.3
[0.21]
2.54
[0.09]
2.54
[0.09]
1.27
[0.05]
0.80
[0.03] Nom.
Max.
(N-1)x1.27
Recommended PCB Hole Layout
Not Solder Side Shown
Notes:
1. Connectors are always sideways mounted onto an adhesive tape.
2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm.
3. At additional charge a special packaging option is available: 250 connectors on
a reel with a diameter of 250 mm, packed in a dedicated dispenser box.
No. of Positions Dimensions (mm) Part Numbers
A B 2500 Connectors/Reel 250 Connectors/Box
4 3.81 7.1 (1500) 215460-4 (1500) 7-215460-4
6 6.35 9.7 215460-6 7-215460-6
8 8.89 12.2 215460-8 7-215460-8
10 11.43 14.7 1-215460-0 8-215460-0
12 13.97 17.3 1-215460-2 8-215460-2
14 16.51 19.8 1-215460-4 8-215460-4
16 19.05 22.4 1-215460-6 8-215460-6
18 21.59 24.9 1-215460-8 8-215460-8
20 24.13 27.4 2-215460-0 9-215460-0
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
METRIC
Dimensions are
millimeters over inches
36
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Female-on-Board Connector Surface Mount Device (SMD)
Micro-MaTch Miniature Connector System —
Female-on-Board Connector Surface Mount Device (SMD)
This SMD connector version
is designed for standard
reflow and infrared solder
processes (“FULL SMD”).
Polarization is accom-
plished by the housing,
therefor no polarization
holes in the PC Board are
required.
The contact is designed with
an additional spring to com-
pensate for differences in
thermal expansion between
housing and PCB. Due to
this feature, tension on
solder joints is prevented.
A=(N-1)*1.27
Tape for Vacuum P&P
0.5B-2.5
B
Minimum
Solder PathLength
A
Recommended
PCB Layout
Top View
1.90
[.075]
1.27
[.050]
5.0
[.197]
5.0
[.197]
7.0
[.276]
5.0
[.197]
3.00
[.118]
2.54
[.100] 1.50
[.059]
1.50
[.059]
Notes:
1. To enable automatic Pick & Placement, connectors are always packed in embossed
tape according EIA481 specification.
2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm.
3. Connectors are supplied with or without a feature for vacuum Pick & Placement.
4. For this connector no additional solder hold down is required.
No. of Positions Dimensions (mm) Part Numbers
A B 2500 Connectors/Reel 250 Connectors/Box
4 3.81 7.1 188275-4 7-188275-4
6 6.35 9.7 188275-6 7-188275-6
8 8.89 12.2 188275-8 7-188275-8
10 11.43 14.7 1-188275-0 8-188275-0
12 13.97 17.3 1-188275-2 8-188275-2
14 16.51 19.8 1-188275-4 8-188275-4
16 19.05 22.4 1-188275-6 8-188275-6
18 21.59 24.9 1-188275-8 8-188275-8
20 24.13 27.4 2-188275-0 9-188275-0
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
METRIC
Dimensions are
millimeters over inches
37
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
PageHead_12_HelvCdBd (Continued)
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Male-on-Board Connector
Micro-MaTch Miniature Connector System —
Male-on-Board Connector
This male connector version
is designed to be soldered
onto PC Boards with a nom-
inal thickness of 1.6 mm.
The solder legs are
indented for firm retention of
the connector in the
PC Board.
The connector housing
features a polarizing pin
on one end for proper
orientation of this connector
version.
A
A
A
B
5.00
[.197]
2.54
[.100] 1.27
[.050]
6.75
[.266]
0.80
[.031]
2.54
[.100]
2.54
[.100]
1.27
[.050]
7.10
[.280]
Typical Hole Pattern
Not Solder Side Shown
Section A-A
Notes:
1. To enable automatic Pick & Placement, connectors are always packed in
embossed tape according EIA481 specification.
2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm.
3. Connectors are supplied with or without a feature for vacuum Pick & Placement.
4. For this connector no additional solder hold down is required.
No. of Positions Dimensions (mm) Part Numbers
A B 2500 Connectors/Reel 250 Connectors/Box
4 3.81 8.2 215464-4 7-215464-4
6 6.35 10.7 215464-6 7-215464-6
8 8.89 13.3 215464-8 7-215464-8
10 11.43 15.8 1-215464-0 8-215464-0
12 13.97 18.3 1-215464-2 8-215464-2
14 16.51 20.8 1-215464-4 8-215464-4
16 19.05 23.4 1-215464-6 8-215464-6
18 21.59 25.9 1-215464-8 8-215464-8
20 24.13 28.4 2-215464-0 9-215464-0
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
METRIC
Dimensions are
millimeters over inches
38
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Male-on-Wire Connector
Micro-MaTch Miniature Connector System —
Male-on-Wire Connector
For the wire connection, a
well-known type blade with
a single slot is used. The
insides of the slots are tin
plated for stable and
reliable connections.
The connector is supplied
with a pre-assembled cover,
providing excellent position-
ing of the ribbon cable
before and during
the insulation displacement
process.
After termination the cover
is held in place by each
individual contact in addi-
tion to two plastic latches at
both ends of the connector.
Remark:
The Micro-MaTch Male-on-Wire connector is specifically designed to be disengaged from
its counterpart by pulling the cable in the appropriate direction.
Notes:
1. Connectors are always sideways mounted onto an adhesive tape.
2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm.
3. At additional charge a special packaging option is available: 250 diameter of 250 mm,
packed in a dedicated dispenser box.
No. of Positions Dimensions (mm) Part Numbers
A B C 2500 Connectors/Reel 250 Connectors/Box
4 8.6 5.4 3.81 215083-4 7-215083-4
6 11.1 8.0 6.35 215083-6 7-215083-6
8 3.6 10.5 8.89 215083-8 7-215083-8
10 16.2 13.0 11.43 1-215083-0 8-215083-0
12 18.7 15.6 13.97 1-215083-2 8-215083-2
14 21.3 18.1 16.51 1-215083-4 8-215083-4
16 23.8 20.7 19.05 1-215083-6 8-215083-6
18 26.3 23.2 21.59 1-215083-8 8-215083-8
20 28.9 25.7 24.13 2-215083-0 9-215083-0
24 34.0 30.8 29.21 2-215083-4 9-215083-4
Mates with:
X-215079-X
X-215460-X
X-188275-X
X-215079-X
X-338068-X
X-338069-X
X-338070-X
X-100411-X
X-188431-X
A
A
AMax.
BMax.
Max. C
Section A-A
6.8
5.10
[.201]
10.20
[.402]
METRIC
Dimensions are
millimeters over inches
39
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Paddle Board Connector
Micro-MaTch Miniature Connector System —
Paddle Board Connector
Direct soldering of a ribbon
cable onto a PC Board is
a very difficult job with the
smaller sizes of ribbon
cable. If such a permanent
cable connection is
required, the application
can be facilitated by using
this connector type.
The Paddle Board connec-
tor is applied to the ribbon
cable with the same appli-
cation tooling, available
for the termination of the
Male-on-Wire connector.
The solder legs are
indented and provide
mechanical retention of the
connector/cable assembly
in the PC Board before and
during soldering.
This Paddle Board connec-
tor version is designed to
be soldered onto PC
Boards with a nominal thick-
ness of 1.6 mm.
A
A
A
B
5.00
[.197]
2.54
[.100] 1.27
[.050]
6.75
[.266]
0.80
[.031]
2.54
[.100]
2.54
[.100]
1.27
[.050]
7.10
[.280]
Typical Hole Pattern
Not Solder Side Shown
Section A-A
Notes:
1. To enable automatic Pick & Placement, connectors are always packed
in embossed tape according EIA481 specification.
2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm.
3. Connectors are supplied with or without a feature for vacuum
Pick & Placement.
4. For this connector no additional solder hold down is required.
No. of Positions Dimensions (mm) Part Numbers
A B C 2500 Connectors/Reel 250 Connectors/Box
4 8.6 5.4 3.81 215570-4 7-215570-4
6 11.1 8.0 6.35 215570-6 7-215570-6
8 3.6 10.5 8.89 215570-8 7-215570-8
10 16.2 13.0 11.43 1-215570-0 8-215570-0
12 18.7 15.6 13.97 1-215570-2 8-215570-2
14 21.3 18.1 16.51 1-215570-4 8-215570-4
16 23.8 20.7 19.05 1-215570-6 8-215570-6
18 26.3 23.2 21.59 1-215570-8 8-215570-8
20 28.9 25.7 24.13 2-215570-0 9-215570-0
24 34.0 30.8 29.21 2-215570-4 —
No mate — direct soldering
of ribbon cable onto the
PC Board
METRIC
Dimensions are
millimeters over inches
40
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Crimp On Snap In (COSI) Connector
Micro-MaTch Miniature Connector System —
Crimp On Snap In (COSI) Connector
This crimp version for dis-
crete Wire-to-Board applica-
tions is fully compatible with
all female connectors of the
Micro-MaTch family.
Insulation and wire crimp
barrel are copies of the
well proven AMPLIMITE
contacts. After mating with
a Micro-MaTch female
connector the contacts are
fully protected by isolating
plastics. Contacts are made
of a pre-tinned phosphor
bronze.
Contacts are supplied in a
range for 24-20 AWG and
28-24 AWG. For repair oper-
ations an extraction tool is
available; Part Number
734873-1.
2.54
[.100]
1.27
[.050]
2.65
[.104]
12.40
[.488]
C
BMax.
AMax.
Max.
9.10
[.358] Max.
5.10
[.201]
0.82
[.032]
Max.
Notes:
1. Contacts can be crimped using a G-terminator or mini stripper crimper based applicator.
2. For the contacts on strip the standard packaging quantity is 15.000 pcs on a reel
with a diameter of 600 mm.
3. For repair/service contacts are packaged 750 pcs. Per reel, to be used with handtools.
4. The housings are bulk packed in a box with a packaging quantity varying from 200 to
900 pcs per box.
Wire Size Range Insulation Diameter Part Number
(mm2) (AWG) (mm) Large reel, 15.000 Small reel, 750
0.08-0.20 28-24 0.76-1.00 338096-1 1-338096-1
0.20-0.50 24-20 1.27-1.52 338097-1 1-338097-1
0.70
[.027]
0.40
[.016]
0.20
[.008]
6.00
[.236] Ref.
8.65
[.341] Max.
0.25
[.010]
Cut Off
Max.
Basic Part Number 338095
and Contacts Part Numbers
338096 and 338097
No. of Positions Dimensions (mm) Part Numbers
A B C 2500 Connectors/Reel 250 Connectors/Box
4 7.2 8.4 3.81 338095-4 900
6 9.8 10.9 6.35 338095-6 700
8 12.3 13.5 8.89 338095-8 500
10 14.9 16.0 11.43 1-338095-0 450
12 17.4 18.5 13.97 1-338095-2 400
14 19.9 21.1 16.51 1-338095-4 350
16 22.5 23.6 19.05 1-338095-6 300
18 25.0 26.2 21.59 1-338095-8 250
20 27.6 28.7 24.13 2-338095-0 200
Mates with:
X-338095-X
Mates with:
X-215079-X
X-215460-X
X-188275-X
X-215079-X
X-338068-X
X-338069-X
X-338670-X
X-100411-X
X-188431-X
METRIC
Dimensions are
millimeters over inches
41
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System — Specials
Micro-MaTch Miniature Connector System —
Specials
SMC Connector Part Number 100411
This connector type enables a solderless application to the
printed circuit board. Contact is made on the surface of the
PCB, enabling the use of paperphenol and epoxy boards
with both drilled and punched holes. This connector is suit-
able for both Wire-to-Board as Board-to-Board connections.
Because this connector is mounted on the solder side, the
components of both PCB’s in a parallel Board-to-Board
application, will be in the same direction. By this, the stack-
ing of two or more PCB’s is possible. Application tooling
available on request.
Mates with: X-215464-X X-215083-X
X-338095-X
Male SMD Part Number 338728
This connector enables the possibility to have a full SMD
to SMD Board-to-Board application. It mates with all
Micro-MaTch female connectors, and will be packaged
according EIA 481 standard. Consult TE for more information.
Mates with: X-215079-X X-338070-X
X-215460-X X-188431-X
X-188275-X X-338068-X
X-338069-X
In-board SMD Part Number 188431
This connector is only tooled in 20 position (9-188431-0)
and packaged in embossed tape according to EIA481
standards. The connectors are equipped with a feature for
vacuum Pick & Placement. It enables the mounting of a
PCB with the solder side direct behind e.g. a display. It is
also possible to obtain a parallel BTB application with an
extreme low PCB distance of 4.2 mm.
Mates with: X-338095-X X-338728-X
X-215464-X X-215083-X
Locking Latch Part Numbers 338068/338069/338070
For Wire-to-Board applications this feature provides an
audible click during mating. This feature is available for the
standard Micro-MaTch female connectors. Cross reference
is made by base part number x-338068-x instead of
x-215079-x, x-338069-x instead of x-188275-x and
x-338070-x instead of x-215460-x (standard large reel
packaging only).
Mates with: X-338095-X X-338728-X
X-215464-X X-215083-X
42
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Application Tooling
Micro-MaTch Miniature Connector System
Application Tooling
Pistol Handgrip Tooling. This is a
handtool for terminating Micro-MaTch
Male-on-Wire and Paddle Board con-
nectors. Meant for small quantities or
repair services. Pistol handgrip and
adapter must be ordered separately.
Standard Pistol Handgrip Part
Number 734155-1. This basic tool can
be used for Micro-MaTch and other
applications.
Pistol Handgrip Adapter Set Part
Number 734024-1. This adapter can
be used for Micro-MaTch terminations,
together with the pistol handgrip.
Bench Press Tooling Part Number
733280-3. This complete tool includes
a Micro-MaTch dedicated tool set
mounted on the bench press 654173-2.
Bench Press Part Number 91085-2.
This basic press is a hand operated
version. This press can also be
obtained in a pneumatically operated
version; Part Number 91112-3.
Bench Press Tool Set Part Number
733278-2. This tool set is designed
especially for Micro-MaTch. It fits both
pneumatically and hand operated press.
COSI Hand Tooling Part Number
734870-1 for 24-20 AWG, and Part
Number 734870-2 for 28-24 AWG.
These dedicated tools can be obtained
for services/repair applications.
G-terminator Part Number 677-499-1. Applicators for G-terminator.
Part Number 677894-1 for AWG 28-
24 (Part Number 338096-1) and
Part Number 677895-1 for AWG 24-
20 (Part Number 338097-1).
43
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Application Tooling (Continued)
Micro-MaTch Miniature Connector System
Application Tooling
Semiautomatic Tooling Part Number 677410-1.
This tool can be used for Micro-MaTch lead end and for
daisy chain assembly applications.
Semiautomatic Tooling Part Number 677412-5 for
Micro-MaTch only and Part Number 1-677412-0 for both
Micro-MaTch and other ribbon cables. This machine can be
used for lead end assemblies.
Connector Dispenser Part Number 677463-1.
The dispenser accepts the Micro-MaTch standard reels
(2500 pcs/reel). It automatically removes the pre-set
connector quantity from the reel and drops it in a separate
box. Quantity can easily be programmed by the user.
44
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Lead Assembly
Micro-MaTch Miniature Connector System Sample Box
Micro-MaTch Miniature Connector System
Lead Assembly and Sample Box
It is possible to deliver
custom made Micro-MaTch
lead assemblies, both cable
end assemblies and daisy-
chain assemblies,
in all positions between
4 and 20 in all required
cable lengths. All leads are
100% electrically tested on
shortcut and connection
before shipment. A flexible
7 stranded cable is used for
easy assembly. Special
cable on request. For order
information contact TE.
Sample Box
Part Number 1377074-1
This box includes samples
of all connector types within
the Micro-MaTch family,
examples of leads, printed
circuit boards and a
CD-ROM. The CD-ROM
includes an electronic
version of this catalogue, an
animation of the contact
principle and CAD files of
all connector types.
This sample box is an aid
in visualizing the variety
of applications where
Micro-MaTch can be
implemented.
45
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
PageHead_12_HelvCdBd (Continued)
.050 [1.27] Centerline Ribbon Cable Connectors
Universal I/O Pin Connectors without Mounting Ears
Universal I/O Pin Connectors without Mounting Ears
Material and Finish
Housing and Cover — Flame retardant
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, .000100
[0.00254] min. tin on termination end,
.000030 [0.00762] min. gold on mating
end, both over .000050 [0.00127] min.
nickel
Technical Documents
Product Specification
108-1336
Application Specification
114-7011
Instruction Sheets
408-9720
408-6939
■Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
■Certified by the
Canadian Standards
Association,
File No. LR 7189
Accessories
Strain Relief — page 67
Ejector Latch — page 63
Military Polarizer — page 63
Terminates 26 and 28 AWG solid or
stranded ribbon cable. See Application
Specification for cable requirements.
Related Product Data
Mateable Receptacles Novo —
pages 48-51
Female Socket Connectors —
pages 52-55
R
R
Without Latches With Latches
B
A
0.754±.015
[19.15±0.36]
Pin Length
.240
[6.10]
.330
[8.38]
Pins On Centerlines
.100
[2.54]
Position No.1
Indicator
No. of Dimensions Part Numbers of Connectors with:
Positions ABNo Latches Short Latches1Long Latches2
103,4 .992 1.072 1-111446-4 1-111492-5 1-111504-4
25.20 27.23
143,4 1.192 1.272 1-111446-5 1-111492-6 1-111504-5
30.28 32.31
16 1.292 1.372 1-111446-6 1-111492-7 1-111504-6
32.82 34.85
20 1.492 1.572 1-111446-8 — 1-111504-7
37.90 39.93
24 1.692 1.772 1-111446-9 1-111492-9 1-111504-8
42.98 45.01
26 1.792 1.872 2-111446-0 2-111492-0 —
45.52 47.55
30 1.992 2.072 2-111446-1 2-111492-1 2-111504-0
50.60 52.63
34 2.192 2.272 2-111446-2 2-111492-2 —
55.68 57.71
40 2.492 2.572 2-111446-3 2-111492-3 —
63.30 65.33
44 2.692 2.772 2-111446-4 2-111492-4 2-111504-3
68.38 70.41
50 2.992 3.072 1-111446-7 2-111492-5 —
76.00 78.03
60 3.492 3.572 2-111446-5 2-111492-6 —
88.70 90.73
64 3.692 3.772 2-111446-6 — 2-111504-6
93.78 95.81
1Use short latch versions when mating connectors without strain reliefs are used.
2Use long latch versions when mating connectors with strain reliefs are used.
3No slot on end with position No. 1 indicator for 10 and 14-position connectors.
4No slot for snap-in polarizer on end with position No. 1 indicator for 10 and 14-position connectors.
Note: All part numbers are RoHS
compliant.
46
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.050 [1.27] Centerline Ribbon Cable Connectors
Universal I/O Pin Connectors with Slotted Mounting Ears
Universal I/O Pin Connectors with Slotted Mounting Ears
Without Latches With Latches
B
.754 ± .015
[19.15 ± 0.36]
A
Pin Length
.240
[6.10]
Pins On Centerlines
.100 [2.54]
.330
[8.38]
Position No.1
Indicator
No. of Dimensions Part Numbers of Connectors with:
Positions ABNo Latches Short Latches1Long Latches2
103,4 .992 1.476 5111448-1 1-111494-5 1-111506-6
25.20 37.49
143,4 1.192 1.676 —— —
30.28 42.57
16 1.292 1.776 5111448-3 — 1-111506-8
32.82 45.11
20 1.492 1.976 5111448-4 1-111494-8 —
37.90 50.19
24 1.692 2.176 5111448-5 1-111494-9 2-111506-0
42.98 55.27
26 1.792 2.276 ——2-111506-1
45.52 57.81
30 1.992 2.476 5111448-7 2-111494-0 —
50.60 62.89
34 2.192 2.676 5111448-8 2-111494-1 —
55.68 67.97
40 2.492 2.976 5111448-9 2-111494-2 2-111506-4
63.30 75.59
44 2.692 3.176 — 2-111494-3 2-111506-5
68.38 80.67
50 2.992 3.476 — 2-111494-4 1-111506-4
76.00 88.29
60 3.492 3.976 — 2-111494-5 —
88.70 100.99
64 3.692 4.176 1-5111448-3 2-111494-6 —
93.78 106.07
1Use short latch versions when mating connectors without strain reliefs are used.
2Use long latch versions when mating connectors with strain reliefs are used.
3No slot on end with position No. 1 indicator for 10 and 14-position connectors.
4No slot for snap-in polarizer on end with position No. 1 indicator for 10 and 14-position connectors.
Material and Finish
Housing and Cover — Flame retardant
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, .000100
[0.00254] min. tin on termination end,
.000030 [0.00762] min. gold on mating
end, both over .000050 [0.00127] min.
nickel
Technical Documents
Product Specification
108-1336
Application Specification
114-7011
Instruction Sheets
408-9720
408-6939
■Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
■Certified by the
Canadian Standards
Association,
File No. LR 7189
Accessories
Ejector Latch — page 63
Military Polarizer — page 63
Terminates 26 and 28 AWG solid or
stranded ribbon cable. See Application
Specification for cable requirements.
Related Product Data
Mateable Receptacles Novo —
pages 48-51
Female Socket Connectors —
pages 52-55
R
R
Note: All part numbers are RoHS
compliant.
47
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
.050 [1.27] Centerline Ribbon Cable Connectors
EUROLATCH Receptacles 64-Position
EUROLATCH Receptacles, 64-Position
(Three-Row Housings, Two Rows Loaded)
Housing Assembly with
Cover (Preassembled)
Material and Finish
Housing and Cover — UL 94V-0
rated thermoplastic, black
Contacts — Phosphor bronze, duplex
plated 0.00076 [.000030] gold on
post/pin mating end, 0.00254-0.00508
[.000100-.000200] tin on termination
end, with entire contact underplated
0.00127 [.000050] nickel.
Related Product Data
Mateable Pin Connectors —
Eurocard Type C and Type R—
Selection Guide 82650,
See Catalog 82721
Ribbon Cable —
Part Number 2-57040-2 or
Part Number 2-57034-5 (64 conductor)
Application Tooling — pages 70-74
Technical Documents
Product Specifications
108-46003 EUROLATCH Receptacles
DIN 41612
IEC 603-2
Instruction Sheet
408-9156
■Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
■Certified by the
Canadian Standards
Association,
File No. LR 7189
R
R
Row A
78.74
[3.100]
84.89
[3.342]
89.92
[3.54]
94.74
[3.730]
3.48
[.137]
10.49
[.413]
8.46
[.333]
8.46
[.333]
Row B
Row C
6.35
[.250]
18.57
[.731]
84.66
[3.333]
10.95
[.431] 14.43
[.568]
2.54
[.100]
1.27
[.050]
Cover
Housing
Assembly
Terminated
2.79 Dia.
[.110] Dia.
(2 Holes)
Contact Receptacle
Rows Kit No.
Loaded (Preassembled)
A and C 746603-4
METRIC
Dimensions are
millimeters over inches
48
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.050 [1.27] Centerline Ribbon Cable Connectors
Novo Connectors
Novo Connectors
Product Facts
■.100 x .100 [2.54 x 2.54]
mating grid for .050 [1.27]
pitch ribbon cable
■Tuning fork contact offers a
military approved design, at
an economical cost
■Polarization options include
military, center and military,
and dual bar
■Choice of duplex gold plating
on contact mating area
■Insulation displacement
contacts for fast, economical
mass terminations
■Contact design provides
uniform latching of contacts
and housing with connector
cover
■Housing, cover and strain
relief made of UL 94V-0
rated thermoplastic material
■Selected 10 thru 64-position
configurations available
■Accepts wire size range
28-26 AWG [0.08-0.15 mm2],
solid or stranded
■Snap-on strain relief and
choice of pull loops
available
■One-step termination with
Novo tooling
■Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E28476
■Certified by the
Canadian Standards
Association,
File No. LR 7189
R
R
Novo receptacles offer a
dual contact interface with
all normal force created by
metal-to-metal contact. This
provides a higher degree of
contact reliability.
Novo receptacles feature
two rows of contacts on
.100 x .100 [2.54 x 2.54]
centerlines in select sizes
from 10 to 64 positions.
Contacts mate with .0252
[0.642] or round posts with
.245 [6.22] max. and .175
[4.45] min. lengths. The
Novo tuning fork contact
offers a military-approved
design, and at a lower cost.
Contacts are made of
phosphor bronze and
are available in a choice
of duplex .000015 [0.00038]
or .000030 [0.00076] gold
in the mating area, and
.000100 [0.00254] tin in the
termination area, with the
entire contact underplated
with .000050 [0.00127]
nickel.
Housings are made of
UL 94V-0 thermoplastic
material and feature military,
military and center, and
dual bar polarization.
Optional accessories
include a snap-on strain
relief and pull loops.
Novo receptacles can be
terminated to .050 [1.27]
pitch ribbon cable by a
wide variety of one-step
application tooling.
Assemblies are packaged
in tubes for ease of handling,
protection and termination.
49
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.050 [1.27] Centerline Ribbon Cable Connectors
Novo Connectors
Novo Receptacles, Military Polarized* .100 x .100 [2.54 x 2.54] Centers
C
.100
[2.54]
.100
[2.54]
Terminated
with Cover
Position No. 1
Index Slot
.329
[8.36]
.629
[15.98]
Ref.
.093
[2.36]
B
.460
[11.68] .135
[3.43]
.240
[6.10]
Housing
Assembly
Cover
Terminated
with Cover
and Strain Relief
.570
[14.48]
Ref. .650
[16.51]
Ref.
A
.106
[2.69]
.100
[2.54]
Housing Assembly and Cover
•There is no polarization slot on
this end of 10- and 14-position
receptacles.
•
.464
[11.79]
Ref.
.422
[10.72]
Ref.
Material and Finish
Housing, Cover & Strain Relief —
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, duplex
plated (See chart below)
Related Product Data
Mateable Pin Headers —
Universal — pages 84-95
Low Profile — pages 76-83
Mateable Universal I/O Pin
Connectors — pages 45 and 46
Accessories
Pull Tabs — page 63
Keying Plug — page 64
Pull Loops — page 66
Strain Relief Dimensional
Information — page 68
Application Tooling — pages 70-74
Technical Documents
Product Specifications
108-40000 Novo and Novo Stackable
Receptacles; 108-40004 Ribbon Cable,
PVC Insulated
Application Specification
114-40005 Ribbon Cable Connectors
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers
listed below for the applicable docu-
ments.
*These receptacles can be used in
applications requiring non-polariza-
tion, as well as military polarization.
Contacts mate with .025 [0.64] sq.
or round pins with .245 [6.22] max.
and .175 [4.45] min. lengths.
Housing Assembly with
Cover (Preassembled) and
Strain Relief (Optional)
No. of Dimensions Contact Strain Relief Receptacle
Pos. ABC Plating Part No. (Preassembled)
10 .450 .680 .400 Duplex1499252-5 1658620-1
11.43 17.27 10.16 Duplex2499252-5 1658623-1
14 .650 .880 .600 Duplex1499252-9 1658620-2
16.51 22.35 15.24 Duplex2499252-9 1658623-2
16 .750 .980 .700 Duplex1499252-8 1658620-3
19.05 24.89 17.78 Duplex2499252-8 1658623-3
20 .950 1.180 .900 Duplex1499252-2 1658620-4
24.13 29.97 22.86 Duplex2499252-2 1658623-4
24 1.150 1.380 1.100 Duplex11-499252-0 1658620-5
29.21 35.05 27.94 Duplex21-499252-0 1658623-5
26 1.250 1.480 1.200 Duplex1499252-3 1658620-6
31.75 37.59 30.48 Duplex2499252-3 1658623-6
30 1.450 1.680 1.400 Duplex11-499252-2 1658620-7
36.83 42.67 35.56 Duplex21-499252-2 1658623-7
34 1.650 1.880 1.600 Duplex1499252-6 1658620-8
41.91 47.75 40.64 Duplex2499252-6 1658623-8
40 1.950 2.180 1.900 Duplex1499252-1 1658620-9
49.53 55.37 48.26 Duplex2499252-1 1658623-9
50 2.450 2.680 2.400 Duplex1499252-4 1-1658620-0
62.23 68.07 60.96 Duplex2499252-4 1-1658623-0
60 2.950 3.180 2.900 Duplex1499252-7 —
74.93 80.77 73.66 Duplex2499252-7 —
64 3.150 3.380 3.100 Duplex11-499252-3 1-1658620-2
80.01 85.85 78.74 Duplex21-499252-3 —
1.000015 [0.00038] gold or gold flash over palladium-nickel .000015 [0.00038] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
2.000030 [0.00076] gold or gold flash over palladium-nickel .000030 [0.00076] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
Note: These receptacles include a housing assembly and cover (preassembled). Strain reliefs may be purchased sep-
arately using the component part nos. listed above.
All part numbers are RoHS compliant.
50
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.050 [1.27] Centerline Ribbon Cable Connectors
Novo Connectors
Novo Receptacles, Center and Military Polarized*
.100 x .100 [2.54 x 2.54] Centers
Contacts mate with .025 [0.64] sq.
or round pins with .245 [6.22] max.
and .175 [4.45] min. lengths.
Material and Finish
Housing, Cover & Strain Relief —
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, duplex
plated (See chart below)
Related Product Data
Mateable Pin Headers —
Universal — pages 84-95
Low Profile — pages 76-83
Mateable Universal I/O Pin
Connectors — pages 45 and 46
Accessories
Pull Tabs — page 63
Keying Plug — page 64
Pull Loops — page 66
Strain Relief — page 68
Application Tooling — pages 70-74
Technical Documents
Product Specifications
108-40000 Novo and Novo Stackable
Receptacles; 108-40004 Ribbon Cable,
PVC Insulated
Application Specification
114-40005 Novo Receptacles
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers
listed below for the applicable docu-
ments.
*These receptacles can be used
in applications requiring center
polarization.
C
D
.100
[2.54]
.100
[2.54]
.130
[3.30]
.140
[3.56] .460
[11.68] .135
[3.43]
.240
[6.10]
.422
[10.72]
Ref.
.464
[11.79]
Ref.
.570
[14.48]
Ref.
.650
[16.51]
Ref.
A
.100
[2.54]
Cover
Housing
Assembly
Polarization
Bar
Terminated
with Cover
and Strain Relief
Terminated
with Cover
Housing Assembly and Cover
•There is no polarization slot on
this end of 10- and 14-position
receptacles.
.629
[15.98]
Ref.
.329
[8.36]
.093
[2.36]
B
D
.106
[2.69]
Housing Assembly with
Cover (Preassembled) and
Strain Relief (Optional)
No. of Dimensions Contact Strain Relief Receptacle
Pos. ABCD Plating Part No. (Preassembled)
10 .450 .680 .400 .275 Duplex1499252-5 1658621-1
11.43 17.27 10.16 6.99 Duplex2499252-5 1658622-1
14 .650 .880 .600 .375 Duplex1499252-9 1658621-2
16.51 22.35 15.24 9.53 Duplex2499252-9 1658622-2
16 .750 .980 .700 .425 Duplex1499252-8 1658621-3
19.05 24.89 17.78 10.80 Duplex2499252-8 1658622-3
20 .950 1.180 .900 .525 Duplex1499252-2 1658621-4
24.13 29.97 22.86 13.34 Duplex2499252-2 1658622-4
24 1.150 1.380 1.100 .625 Duplex11-499252-0 1658621-5
29.21 35.05 27.94 15.88 Duplex21-499252-0 1658622-5
26 1.250 1.480 1.200 .675 Duplex1499252-3 1658621-6
31.75 37.59 30.48 17.15 Duplex2499252-3 1658622-6
30 1.450 1.680 1.400 .775 Duplex11-499252-2 1658621-7
36.83 42.67 35.56 19.69 Duplex21-499252-2 1658622-7
34 1.650 1.880 1.600 .875 Duplex1499252-6 1658621-8
41.91 47.75 40.64 22.23 Duplex2499252-6 1658622-8
40 1.950 2.180 1.900 1.025 Duplex1499252-1 1658621-9
49.53 55.37 48.26 26.04 Duplex2499252-1 1658622-9
50 2.450 2.680 2.400 1.275 Duplex1499252-4 1-1658621-0
62.23 68.07 60.96 32.39 Duplex2499252-4 1-1658622-0
60 2.950 3.180 2.900 1.525 Duplex1499252-7 1-1658621-1
74.93 80.77 73.66 38.74 Duplex2499252-7 1-1658622-1
64 3.150 3.380 3.100 1.625 Duplex11-499252-3 1-1658621-2
80.01 85.85 78.74 41.28 Duplex21-499252-3 1-1658622-2
1.000015 [0.00038] gold or gold flash over palladium-nickel .000015 [0.00038] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
2.000030 [0.00076] gold or gold flash over palladium-nickel .000030 [0.00076] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
Note: These receptacles include a housing assembly and cover (preassembled). Strain reliefs may be purchased sep-
arately using the component part nos. listed above.
All part numbers are RoHS compliant.
Position No. 1
Index Slot
•
51
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
.050 [1.27] Centerline Ribbon Cable Connectors
Novo Connectors
Novo Receptacles, Dual Polarized, .100 x .100 [2.54 x 2.54] Centers
No. of Dimensions Strain Relief Receptacle
Pos. ABCPart No. (Preassembled)
10 .450 .680 .400 499252-5 1658624-1
11.43 17.27 10.16
14 .650 .880 .600 499252-9 1658624-2
16.51 22.35 15.24
16 .750 .980 .700 499252-8 1658624-3
19.05 24.89 17.78
20 .950 1.180 .900 499252-2 1658624-4
24.13 29.97 22.86
24 1.150 1.380 1.100 1-499252-0 1658624-5
29.21 35.05 27.94
26 1.250 1.480 1.200 499252-3 1658624-6
31.75 37.59 30.48
30 1.450 1.680 1.400 1-499252-2 1658624-7
36.83 42.67 35.56
34 1.650 1.880 1.600 499252-6 1658624-8
41.91 47.75 40.64
40 1.950 2.180 1.900 499252-1 1658624-9
49.53 55.37 48.26
50 2.450 2.680 2.400 499252-4 1-1658624-0
62.23 68.07 60.96
64 3.150 3.380 3.100 1-499252-3 1-1658624-2
80.01 85.85 78.74
Material and Finish
Housing, Cover & Strain Relief —
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, duplex
plated .000030 [0.00076] gold or gold
flash over palladium-nickel .000030
[0.00076] min. total on post/pin mating
end, .000100-.000200 [0.00254-
0.00508] tin on termination end, with
entire contact underplated .000050
[0.00127] nickel.
Related Product Data
Mateable Pin Headers —
Universal — pages 84-95
Low Profile — pages 76-83
Mateable Universal I/O Pin
Connectors — pages 45 and 46
Accessories
Pull Tabs — page 63
Keying Plug — page 64
Pull Loops — page 66
Strain Relief — page 68
Application Tooling — pages 70-74
Technical Documents
Product Specifications
108-40000 Novo and Novo Stackable
Receptacles; 108-40004 Ribbon Cable,
PVC Insulated
Application Specification
114-40005 Novo Receptacles
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers listed
below for the applicable documents.
Housing Assembly with
Recessed Cover
(Preassembled) and Strain
Relief (Optional)
C.100
[2.54]
.100
[2.54]
.140
[3.56]
.190
[4.83]
.140
[3.56] .460
[11.68] .135
[3.43]
.240
[6.10]
.422
[10.72]
Ref.
.464
[11.79]
Ref.
.570
[14.48]
Ref.
.650
[16.51]
Ref.
A
.100
[2.54]
Cover
Housing
Assembly
Terminated
with Cover
and Strain Relief
Terminated
with Cover
Housing Assembly and Cover
.629
[15.98]
Ref.
.329
[8.36]
.093
[2.36]
B
.106
[2.69]
Position No. 1
Index Slot
52
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.050 [1.27] Centerline Ribbon Cable Connectors
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
622 and 636 Series
Technical Data
Color — 622 Series, Blue;
636 Series, Black
Contact Material —
622 Series, Beryllium copper;
636 Series, Phosphor bronze
Contact Plating — 622 Series,
.000030 [0.00076] min. gold on mating
end, .000100-.000200 [0.00254-
0.00508] tin on termination end, both
over .000050 [0.00127] nickel under-
plate; 636 Series, .000015 [0.00038]
min. gold on mating end, .000100-
.000200 [0.00254-0.00508] tin on
termination end, both over .000050
[0.00127] nickel underplate.
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 26-28 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
Universal and Low Profile Pin
Headers — pages 76-95
Universal I/O Ribbon Cable
Connectors — pages 45 and 46
Polarization — Military and center
polarized only
■Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E60980
■Certified by the
Canadian Standards
Association,
File No. LR 92984
Application Tooling
Die — 1437000-9 [T&B# 779-2151 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref.]
Bench Press Base Plate —
6-1437000-4 [T&B# 779-3151 ref.]
Accessories
Strain Relief — page 69
Pull Loops — page 66
Keying Plug — page 64
R
R
METRIC
Dimensions are
millimeters over inches
53
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.050 [1.27] Centerline Ribbon Cable Connectors
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
622 and 636 Series (Continued)
622 Series
Part Numbers
No.of Connector Connector
Pos.
Dimensions Only w/ Strain Relief
ABC
TE Connectivity T&B TE Connectivity T&B
(Reference Only) (Reference Only)
6.477 .200 .075 1658527-2 622-0630LF 1-1658527-9 622-0641LF
12.12 5.08 1.91
10 .677 .400 .126 1658527-3 622-1030LF 1658527-4 622-1041LF
17.20 10.16 3.20
12 .777 .500 .150 2-1658527-0 622-1230LF ——
19.74 12.70 3.81
14.877 .600 .150 1658527-5 622-1430LF 2-1658527-2 622-1441LF
22.28 15.24 3.81
16 .977 .700 .150 1658527-6 622-1630LF 1658527-7 622-1641LF
24.82 17.78 3.81
20 1.177 .900 .150 2-1658527-3 622-2030LF 1658527-8 622-2041LF
29.90 22.86 3.81
241.377 1.100 .150 —— 2-1658527-5 622-2441LF
34.98 27.94 3.81
261.477 1.200 .150 1658527-9 622-2630LF 1-1658527-0 622-2641LF
37.52 30.48 3.81
30 1.677 1.400 .150 ——2-1658527-7 622-3041LF
42.60 35.56 3.81
34 1.877 1.600 .150 ——2-1658527-8 622-3441LF
47.68 40.64 3.81
40 2.177 1.900 .150 1-1658527-2 622-4030LF 1-1658527-3 622-4041LF
55.30 48.26 3.81
50 2.677 2.400 .150 1-1658527-4 622-5030LF 1-1658527-5 622-5041LF
68.00 60.96 3.81
64 3.377 3.100 .150 ——3-1658527-2 622-6441LF
85.78 78.74 3.81
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
“LF” suffix.
636 Series
Part Numbers
No.of Connector Connector
Pos.
Dimensions Only w/ Strain Relief
ABC
TE Connectivity T&B TE Connectivity T&B
(Reference Only) (Reference Only)
6.477 .200 .075 1-1658528-0 636-0630LF ——
12.12 5.08 1.91
10 .677 .400 .126 1-1658528-1 636-1030LF 1658528-2 636-1041LF
17.20 10.16 3.20
14 .877 .600 .150 1-1658528-2 636-1430LF ——
22.28 15.24 3.81
16 .977 .700 .150 1-1658528-4 636-1630LF 1658528-5 636-1641LF
24.82 17.78 3.81
20 1.177 .900 .150 1-1658528-5 636-2030LF 1658528-4 636-2041LF
29.90 22.86 3.81
24 1.377 1.100 .150 1-1658528-6 636-2430LF ——
34.98 27.94 3.81
26 1.477 1.200 .150 1-1658528-7 636-2630LF ——
37.52 30.48 3.81
34 1.877 1.600 .150 ——1658528-6 636-3441LF
47.68 40.64 3.81
40 2.177 1.900 .150 ——1-1658528-9 636-4041LF
55.30 48.26 3.81
50 2.677 2.400 .150 2-1658528-0 636-5030LF 1658528-8 636-5041LF
68.00 60.96 3.81
64 3.377 3.100 .150 ——2-1658528-3 636-6441LF
85.78 78.74 3.81
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
“LF” suffix.
Note: All part numbers are RoHS
compliant.
54
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
.050 [1.27] Centerline Ribbon Cable Connectors
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
609 Series
Technical Data
Color — Blue
Contact Material — Beryllium copper
Contact Plating — .000030 [0.00076]
min. gold on mating end, .000100-
.000200 [0.00254-0.00508] tin on
termination end, both over .000050
[0.00127] nickel underplate.
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 28-30 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
Universal and Low Profile Pin
Headers — pages 76-95
Universal I/O Ribbon Cable
Connectors — pages 45 and 46
Polarization — Military only or
military and center polarized
■Recognized under the
Component Program
of the Underwriters
Laboratories, Inc.
UL File No. E60980
■Certified by the
Canadian Standards
Association,
File No. LR 92984
Application Tooling
Die — 1437000-9 [T&B# 779-2151 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref.]
Bench Press Base Plate —
6-1437000-4 [T&B# 779-3151 ref.]
Accessories
Strain Relief — page 67
Pull Loops — page 66
Keying Plug — page 64
R
R
Dual Slot IDC Design
Optional Center
Polarization
Standard Socket Connector
Without Strain Relief
3.30
[.130]
METRIC
Dimensions are millime-
ters over inches
55
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
.050 [1.27] Centerline Ribbon Cable Connectors
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
609 Series (Continued)
609 Series, Military and Center Polarized
Part Numbers
No.of Connector Connector
Pos.
Dimensions Only w/ Strain Relief
ABC
TE Connectivity T&B TE Connectivity T&B
(Reference Only) (Reference Only)
6.476 .200 .392 1658526-1 609-0630LF 1658526-2 609-0641LF
12.09 5.08 9.96
10 .676 .400 .592 1658526-4 609-1030LF 1658526-5 609-1041LF
17.17 10.16 15.04
14 .876 .600 .792 1658526-8 609-1430LF 1658526-9 609-1441LF
22.25 15.24 20.12
16 .976 .700 .892 2-1658526-9 609-1630LF 1-1658526-1 609-1641LF
24.79 17.78 22.66
20 1.176 .900 1.092 1-1658526-2 609-2030LF 1-1658526-3 609-2041LF
29.87 22.86 27.74
24 1.376 1.100 1.292 1-1658526-4 609-2430LF ——
34.95 27.94 32.82
26 1.476 1.200 1.392 1-1658526-5 609-2630LF 1-1658526-6 609-2641LF
37.49 30.48 35.36
34 1.876 1.600 1.792 1-1658526-8 609-3430LF 1-1658526-9 609-3441LF
47.65 40.64 45.52
36 1.976 1.700 1.892 3-1658526-8 609-3630LF 4-1658526-0 609-3641LF
50.19 43.18 48.06
40 2.176 1.900 2.092 2-1658526-0 609-4030LF 2-1658526-1 609-4041LF
55.27 48.26 53.14
50 2.676 2.400 2.592 2-1658526-3 609-5030LF 2-1658526-4 609-5041LF
67.97 60.96 65.84
64 3.376 3.100 3.292 4-1658526-4 609-6430LF 4-1658526-5 609-6441LF
85.75 78.74 83.62
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
“LF” suffix.
609 Series, Military Polarized
Part Numbers
No.of Connector Connector
Pos.
Dimensions Only w/ Strain Relief
ABC
TE Connectivity T&B TE Connectivity T&B
(Reference Only) (Reference Only)
6.476 .200 .392 2-1658526-5 609-0600MLF ——
12.09 5.08 9.96
10 .676 .400 .592 1658526-3 609-1000MLF ——
17.17 10.16 15.04
16 .976 .700 .892 ——1-1658526-0 609-1601MLF
24.79 17.78 22.66
201.176 .900 1.092 3-1658526-0 609-2000MLF ——
29.87 22.86 27.74
26 1.476 1.200 1.392 3-1658526-5 609-2600MLF ——
37.49 30.48 35.36
40 2.176 1.900 2.092 4-1658526-1 609-4000MLF ——
55.27 48.26 53.14
502.676 2.400 2.592 4-1658526-3 609-5000MLF 2-1658526-2 609-5001MLF
67.97 60.96 65.84
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
“LF” suffix.
56
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
.050 [1.27] Centerline Ribbon Cable Connectors
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series
A
B
.319
[8.1]
Before
Crimping
.280
[7.1]
.100
[2.54]
.100
[2.54]
.100
[2.54]
.008 x .024
[0.2 x 0.6]
Dimensions Part Numbers
No.of
TE Connectivity T&B
Pos. AB (Reference Only)
6.512 .200 1437006-4 609-0653
13.00 5.08
10 .713 .400 1437006-7 609-1053
18.11 10.16
14 .913 .600 1-1437006-0 609-1453
23.19 15.24
16 1.010 .700 1-1437006-3 609-1653
25.65 17.78
20 1.213 .900 1-1437006-6 609-2053
30.81 22.86
26 1.512 1.200 2-1437006-1 609-2653
38.40 30.48
34 1.913 1.600 2-1437006-4 609-3453
48.59 40.64
Note: Order by TE Part Number only. All part numbers listed above are found
on TE customer drawing 1437006-4.
Technical Data
Color — Blue
Contact Material — Beryllium copper
Contact Plating — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel underplate.
Contact Design — Dual slot, barrel
shaped (“tulip”) IDC with solder tail
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 28-30 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
.100 x .100 DIP sockets
Application Tooling
Die —
1-1437000-3 [T&B# 779-2153 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref.]
Bench Press Base Plate —
6-1437000-7 [T&B# 779-3153 ref.]
57
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.050 [1.27] Centerline Ribbon Cable Connectors
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series
Technical Data
Color — Blue
Contact Material — Beryllium copper
Contact Plating — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel underplate.
Contact Design — Single slot, flat,
tuning fork style IDC with solder tail
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 26-28 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
.100 x .100 DIP sockets
Application Tooling
Die —
1-1437000-3 [T&B# 779-2153 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
6-1437000-1 [T&B# 779-3133 ref.]
Bench Press Base Plate —
6-1437000-7 [T&B# 779-3153 ref.]
Accessories
Strain Relief — page 65
Dimensions Part Numbers
No.of
TE Connectivity T&B
Pos. AB (Reference Only)
6.506 .200 1658525-4 622-0653LF
12.85 5.08
8.606 .300 1658525-5 622-0853LF
15.39 7.62
10 .706 .400 1658525-6 622-1053LF
17.93 10.16
14 .906 .600 1658525-7 622-1453LF
23.01 15.24
16 1.006 .700 1658525-8 622-1653LF
25.55 17.78
20 1.206 .900 1658525-9 622-2053LF
30.63 22.86
24 1.406 1.100 1-1658525-0 622-2453LF
35.71 27.94
26 1.506 1.200 1658525-1 622-2653LF
38.25 30.48
34 1.906 1.600 1658525-2 622-3453LF
48.41 40.64
36 2.006 1.700 1-1658525-2 622-3653LF
50.95 43.18
40 2.206 1.900 1-1658525-3 622-4053LF
56.03 48.26
50 2.706 2.400 1658525-3 622-5053LF
68.73 60.96
60 3.206 2.900 1-1658525-5 622-6053LF
81.43 73.66
64 3.406 3.100 1-1658525-6 622-6453LF
86.51 78.74
Notes: Order by TE Part Number only.
All part numbers are RoHS compliant.
7.57
(.298)
58
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.050 [1.27] Centerline Ribbon Cable Connectors
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers
Housing Assembly with
Cover (Preassembled)
Material and Finish
Housing and Cover — Black
thermoplastic, UL 94V-0 rated
Contacts — Phosphor bronze, plated
.000005 [0.000127] min. gold in termi-
nation area, .000100 [0.00254] min. tin
on solder tails, both over .000050
[0.00127] nickel on entire contact
Contact Design — Flat, tuning fork
style IDC
Related Product Data
Application Tooling — pages 70-74
Technical Documents
Product Specification
108-1538 DIP Plug
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers listed
below for the applicable documents.
Mateable Connectors —
For Connectors without Retention
Legs — .100 x .100 DIP Sockets
C
.100
[2.54]
.035
[0.89] Dia.
(After Plating)
*Height of connector after
termination is .253 [6.43] ref.
.278
[7.06]
.396*
[10.06]
.013
[0.33]
.113
[2.87]
.156
[3.96]
.019
[0.48]
B
C
C
A
A
.050
[1.27]
.050
[1.27]
.050
[1.27]
.100
[2.54]
No. of Dimensions DIP Plugs With Retention
Pos. ABC
(Preassembled) Legs
.450 .680 .400
10 11.43 17.27 10.16 2-746610-1 1-111382-4
.650 .880 .600
14 16.51 22.35 15.24 2-746610-2 —
.750 .980 .700
16 19.05 24.89 17.78 1-746610-4 1-111382-6
.950 1.180 .900
20 24.13 29.97 22.86 1-746610-5 1-111382-7
1.150 1.380 1.100
24 29.21 35.05 27.94 2-746610-3 —
1.250 1.480 1.200
26 31.75 37.59 30.48 1-746610-6 1-111382-8
1.450 1.680 1.400
30 36.83 42.67 35.56 1-746610-7 —
1.650 1.880 1.600
34 41.91 47.75 40.64 1-746610-8 1-111382-9
1.950 2.180 1.900
40 49.53 55.37 48.26 1-746610-9 —
2.150 2.380 2.100
44 54.61 60.45 53.34 2-746610-6 —
2.450 2.680 2.400
50 62.23 68.07 60.96 2-746610-0 2-111382-0
2.950 3.180 2.900
60 74.93 80.77 73.66 2-746610-4 —
3.150 3.380 3.100
64 80.01 85.85 78.74 2-746610-5 —
Notes: All plug kits include a housing assembly and cover (preassembled).
All part numbers are RoHS compliant.
PCB Layout
.100
[2.54]
.100
[2.54]
.100
[2.54]
59
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.050 [1.27] Centerline Ribbon Cable Connectors
DIP Plugs, .100 x .300 [2.54 x 7.62] Centers
DIP Plugs, .100 x .300 [2.54 x 7.62] Centers
No. of Dimensions Contact DIP Plugs
Pos. ABC Plating (Preassembled)
.350 .488 .300 Duplex1746611-7
88.89 12.40 7.62 Duplex2—
Duplex35746613-1
.650 .788 .600 Duplex1746611-8
14 16.51 20.02 15.24 Duplex25746612-2
Duplex35746613-2
.750 .888 .700 Duplex1746611-6
16 19.05 22.56 17.78 Duplex25746612-3
Duplex35746613-3
.850 .988 .800 Duplex1746611-9
18 21.59 25.10 20.32 Duplex2—
Duplex3—
.950 1.088 .900 Duplex11-746611-0
20 24.13 27.64 22.86 Duplex2—
Duplex3—
1.000030 [0.00076] gold on leg
2.000015 [0.00038] gold on leg
3.000100 [0.00254] tin on leg
Note: All part numbers are RoHS compliant.
Material and Finish
Housing and Cover — Black thermo-
plastic, UL 94V-0 rated
Contacts — Phosphor bronze, plated
.000050 [0.00127] nickel underplate on
entire contact, .000005 [0.000127] min.
gold on termination (IDC) end. See table
for leg finish.
Contact Design — Flat, tuning fork
style IDC
Related Product Data
Application Tooling — pages 70-74
Technical Documents
Product Specification
108-1538 DIP Plug
Ribbon Cable Requirements —
28 AWG stranded or 26, 28 and 30 AWG
solid wire
Housing Assembly with
Cover (Preassembled)
Recommended Mounting
Hole Pattern
(for .094-.125 [2.39-3.18]
thick pc boards)
.300
[7.62]
60
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
.050 [1.27] Centerline Ribbon Cable Connectors
DIP Plugs, .100 x .600 [2.54 x 15.24] Centers
DIP Plugs, .100 x .600 [2.54 x 15.24] Centers
Material and Finish
Housing and Cover — Black thermo-
plastic, UL 94V-0 rated
Contacts — Phosphor bronze, plated
.000050 [0.00127] nickel underplate on
entire contact, .000005 [0.000127] min.
gold on termination (IDC) end. See table
for leg finish.
Contact Design — Flat, tuning fork
style IDC
Related Product Data
Application Tooling — pages 70-74
Technical Documents
Product Specification
108-1538 DIP Plug
Ribbon Cable Requirements —
28 AWG stranded or 26, 28 and 30 AWG
solid wire
Housing Assembly with
Cover (Preassembled)
No. of Dimensions Contact DIP Plugs
Pos. ABC Plating (Preassembled)
24 1.150 1.288 1.100 Duplex15746615-1
29.21 32.72 27.94
28 1.350 1.488 1.300 Duplex15746615-2
34.29 37.80 33.02
40 1.950 2.088 1.900 Duplex15746615-3
49.53 53.04 48.26
1.000015 [0.00038] gold on leg
Recommended Mounting
Hole Pattern
(for .094-.125 [2.39-3.18]
thick pc boards)
61
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
.050 [1.27] Centerline Ribbon Cable Connectors
4-Row PCB Solder Transition Connectors
4-Row PCB Solder Transition Connectors
Technical Data
Color — Blue
Contact Material — Beryllium copper
Contact Plating — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel underplate.
Contact Design — Dual slot, barrel
shaped (“tulip”) IDC with solder tail
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 28-30 AWG solid or stranded,
PVC insulated ribbon cable
Application Tooling
Die —
1-1437000-3 [T&B# 779-2153 ref]
Handtool —
1437000-6 [T&B# 779-2100 ref]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref]
Bench Press Base Plate —
6-1437000-7 [T&B# 779-3153 ref]
609 Series, Military Polarized
Part Numbers
No.of Dimensions .100 Tail Length .156 Tail Length
Pos. AB
TE Connectivity T&B TE Connectivity T&B
(Reference Only) (Reference Only)
10 .710 .450 6437006-5 609-1003LF ——
18.03 11.43
14 .910 .650 6437006-8 609-1403LF 6437006-9 609-1443LF
23.11 16.51
16 1.010 .750 1-6437006-1 609-1603LF ——
25.65 19.05
20 1.210 .950 ——1-6437006-5 609-2043LF
30.73 24.13
26 1.510 1.250 1-6437006-8 609-2603LF 2-6437006-0 609-2643LF
38.35 31.75
34 1.910 1.650 2-6437006-2 609-3403LF 2-6437006-3 609-3443LF
48.51 41.91
44 2.410 2.150 2-6437006-9 609-4403LF ——
61.21 54.61
50 2.710 2.450 ——3-6437006-2 609-5043LF
68.83 62.23
Notes: Order by TE Part Number only.
All part numbers listed above are found on TE Customer Drawing 6437006-5.
62
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
1-Row Horizontal Receptacles
1.25 Fine Pitch (FP) - 1-Row Horizontal Receptacles
Part Numbers
No. of Dimensions With Mounting Bosses Without Mounting Bosses
Pos. ABC Tape Bag Tape Bag
46.45 3.75 5.45
.254 .148 .215 3-175637-4 3-174638-4 3-175629-4 3-174903-4
57.70 5.00 6.70
.303 .197 .264 3-175637-5 3-174638-5 3-175629-5 3-174903-5
68.95 6.25 7.95
.352 .246 .313 3-175637-6 3-174638-6 3-175629-6 3-174903-6
710.20 7.50 9.20
2.35 .402 .295 .362 3-175637-7 3-174638-7 3-175629-7 3-174903-7
Slot Key 811.45 8.75 10.45
.451 .345 .411 3-175637-8 3-174638-8 3-175629-8 3-174903-8
10 13.95 11.25 12.95
.549 .443 .510 4-175637-0 4-174638-0 4-175629-0 4-174903-0
17 22.70 20.00 21.70
.894 .787 .854 — 4-174638-7 4-175629-7 4-174903-7
20 26.45 23.75 25.45
1.041 .935 1.002 — 5-174638-0 — 5-174903-0
1.25
[.049] Pitch
Optional
Mounting Boss
A
B
C
3.40
[.134] 4.20
[.165]
0.80
[.031]
0.05
[.002]
3.00
[.118]
2.80
[.110]
0.50
[.020]
1.40
[.055]
1.35
[.053]
Min.
Min.
A
3.40
[.134]
0.70
[.028]
0.70
[.028]
1.35
[.053] 0.50
[.020]
1.30
[.051]
Ø 0.80
[.031]
PCB Mounting Layout
Material and Finish
Housing — Black PPS, UL 94V-0 rated
Contacts — Phosphor bronze,
post tin plated over nickel underplate
.050 [1.27] Centerline Ribbon Cable Connectors
1-Row Horizontal Receptacles
63
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Accessories (Continued)Accessories (Continued)
Accessories
Accessories
Part Numbers:
499991-2 (packaged, 50 per bag)
499991-3 (packaged, 1000 per box)
The snap-in polarizer
provides military polarization.
.335
[8.51]
.335
[8.51]
.134
[3.40]
.134
[3.40]
Break Line
Break Line
Throw-Away
Tab
.108±.002
[2.74±0.05]
.236
[5.99]
G
F
Military Polarizers
Material and Finish
Thermoplastic, black
Related Product Data
Universal I/O Pin Connectors —
pages 45 and 46
Universal I/O Latches
Material and Finish
Polyester, black
Related Product Data
Universal I/O Pin Connectors —
pages 45 and 46
Latch Removal Tool
Part Number 91269-1
Flexible Pull Tabs
Material and Finish
Nylon, black
Part Number 120623-1
Related Product Data
Novo Connectors — pages 48-51
Ultra ATA Bus Connectors —
pages 13-15
Mates to Dimensions Part
Receptacles FG
Number
Without Strain Relief .416 .768 111451-1
10.57 19.51
With Strain Relief .576 .928 111451-3
14.63 23.57
Approximate Installed Height of
Part Number 120623-1 Above Connector
No. of Dimensions
Positions CH
10 .680 1.806
17.27 45.87
14.880 1.749
22.35 44.42
16.980 1.721
24.89 43.71
20 1.180 1.664
29.97 42.27
24 1.380 1.607
35.05 40.82
261.480 1.578
37.59 40.08
30 1.680 1.521
42.67 38.63
34 1.880 1.464
47.75 37.19
361.980 1.436
50.29 36.47
402.180 1.379
55.37 35.03
44 2.380 1.322
60.45 33.58
50 2.680 1.236
68.07 31.39
60 3.180 1.094
80.77 27.79
64 3.380 1.037
85.85 26.34
Note: Cannot be used together with a strain relief.
C
H
64
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Accessories (Continued)
Accessories
Key Plug 111620-1
There are ten key plugs on a comb
Keying Plug
Plug (Installed
in Contact)
Keying Plugs
Material and Finish
Thermoplastic, see table for color
Typical Application
Polarizing Key
1-1437023-2
.500
[12.70]
.245
[6.22] .029
[0.58]
.185
[4.70]
Receptacle Catalog Keying Plug
Connector Series Pages Part Number Style Color
2 mm 16, 17 111620-1 Comb Black
Rcpt. Connectors
609 Series Female 54, 55 1-1437023-2 Single Blue
Socket Connectors T&B 609-0000 (Ref.)
622 Series Female 52, 53 1-1437023-2 Single Blue
Socket Connectors T&B 609-0000 (Ref.)
636 Series Female 52, 53 1-1437023-2 Single Blue
Socket Connectors T&B 609-0000 (Ref.)
Order by TE Part Number only.
65
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Accessories (Continued)
Accessories
Key Plug
(Plugs into Contact)
Alternate Configuration
Keying Plug Part No. 104072-1
(10 Keying Plugs per Comb)
Part Number 499712-1
Receptacle Catalog Keying Plug
Connector Series Pages Part Number Style Color
Novo 48-51 499712-1 Single Black
Connectors 104072-1 Comb
Ultra ATA Bus 13-15 499712-1 Single Black
Connectors 104072-1 Comb
Order by TE Part Number only.
Keying Plugs (Continued)
Material and Finish
Thermoplastic, see table for color
66
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Accessories (Continued)
Accessories
Pull Loops, Permanent
(for Receptacles and
Pin Connectors)
Material and Finish
Natural color PVC, 94-VTM-1 rating
(thin material)
Related Product Data
Use with:
Female Socket Connectors — pages
52-55
Ultra ATA Bus Connectors —
pages 13-15
2 mm Receptacle Connectors —
pages 16 and 17
Novo Connectors — pages 48-51
Note: This pull loop is installed manually between the cover and strain relief,
and cannot be used without strain relief.
No. of Positions
Female Socket Ultra ATA 2 mm Novo Dimension Pull Loop
Conns. Bus Conns. Rcpt. Conns. Conns. A Part No.
10 — 12, 14, 16 10 .44 5088450-2
11.18
14 — 20 14 .64 5088450-3
16.26
16 — 22 16 .74 5088450-4
18.80
20 — 24, 26 20 .88 5088450-5
22.35
24 —— 24 1.08 5088450-6
27.43
26 — 30, 34, 40 26 1.18 5088450-7
29.97
30 —— 30 1.38 1-5088450-2
35.05
34 — 44 34 1.58 5088450-8
40.13
40 40 50 40 1.82 5088450-9
46.23
50 —— 50 2.32 1-5088450-0
58.93
60 —— 60 2.80 1-5088450-1
71.12
67
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Accessories
A
B
C
.330
[8.38]
Typ.
Strain Relief for Universal
I/O Pin Connectors Without
Mounting Ears
Material and Finish
Glass-filled polyester, black
Related Product Data
Universal I/O Pin Connectors —
page 45
.098±.002
[2.49±0.05]
2 Plc.
.313±.004
[7.95±0.10]
Typ.
No. of Dimensions Part
Pos. ABC
Number
10 .520 .766 .940 111547-1
13.21 19.46 23.88
14.720 .966 1.140 111547-2
18.29 24.54 28.96
16.820 1.066 1.240 111547-3
20.83 27.08 31.50
20 1.020 1.266 1.440 111547-4
25.91 32.16 36.58
24 1.220 1.466 1.640 111547-5
30.99 37.24 41.66
261.320 1.566 1.740 111547-6
33.53 39.78 44.20
30 1.520 1.766 1.940 111547-7
38.61 44.86 49.28
34 1.720 1.966 2.140 111547-8
43.69 49.94 54.36
402.020 2.266 2.440 111547-9
51.31 57.56 61.98
442.220 2.466 2.640 1-111547-0
56.39 62.64 67.06
50 2.520 2.766 2.940 1-111547-1
64.01 70.26 74.68
60 3.020 3.266 3.440 1-111547-2
76.71 82.96 87.38
643.220 3.466 3.640 1-111547-3
81.79 88.04 92.56
Dimension Part Number
No. of Type TE Connectivity T&B
Pos. A (Ref. Only)
6.472 Standard 2-1437020-1 609-0631
11.99
10 .672 Heavy Duty 3-1437020-7 609-1031HD
17.07 Standard 3-1437020-5 609-1031
14 .872 Heavy Duty 5-1437020-1 609-1431HD
22.15 Standard 4-1437020-9 609-1431
16 .972 Heavy Duty 6-1437020-6 609-1631HD
24.69 Standard 6-1437020-4 609-1631
20 1.172 Heavy Duty 8-1437020-6 609-2031HD
29.77 Standard 8-1437020-4 609-2031
24 1.372 Standard 9-1437020-4 609-2431
34.85
26 1.472 Heavy Duty 1-1437021-2 609-2631HD
37.39 Standard 1-1437021-0 609-2631
34 1.872 Heavy Duty 3-1437021-2 609-3431HD
47.55 Standard 3-1437021-0 609-3431
40 2.172 Heavy Duty 5-1437021-5 609-4031HD
55.17 Standard 5-1437021-3 609-4031
50 2.672 Heavy Duty 8-1437021-1 609-5031HD
67.87 Standard 7-1437021-9 609-5031
64 3.372 Heavy Duty 1-1437022-3 609-6431HD
85.65
Note: Heavy duty part numbers are listed on TE customer drawing
3-1437020-7. Standard part numbers are listed on TE customer
drawing 2-1437020-1.
All part numbers are RoHS compliant.
Strain Relief for 609 Series
(Tulip Contact) Female
Socket Connectors
Material and Finish
Glass-filled polyester, blue
Related Product Data
Female Socket Connectors —
page 54 and 55
A
.240
[6.10]
.565
[14.35]
A
.240
[6.10]
.570
[14.46]
Standard Version
Heavy Duty Version
68
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Accessories
.106
[2.69]
Ref.
.581
[14.76]
Ref.
.240
[6.10]
.186
[4.72]
A
B
No. of Dimensions Part
Pos. AB
Number
.534 .690
10 13.56 17.53 499252-5
.734 .890
1418.64 22.61 499252-9
.834 .990
1621.18 25.15 499252-8
1.034 1.190
20 26.26 30.23 499252-2
1.234 1.390
24 31.34 35.31 1-499252-0
1.334 1.490
2633.88 37.85 499252-3
1.534 1.690
30 38.96 42.93 1-499252-2
1.734 1.890
34 44.04 48.01 499252-6
2.034 2.190
4051.66 55.63 499252-1*
2.234 2.390
4456.74 60.71 1-499252-1
2.534 2.690
50 64.36 68.33 499252-4
3.034 3.190
60 77.06 81.03 499252-7
3.234 3.390
6482.14 86.11 1-499252-3
*Ultra ATA Strain Relief is 499252-1 only.
Strain Relief for Novo and
Ultra ATA Bus Connectors
Material and Finish
Glass-filled polyester, black
Related Product Data
Novo Connectors — pages 48-51
Ultra ATA Bus Connectors —
pages 13-15
No. of Dimensions Part
Pos. AB
Number
.440 .314
811.18 7.98 1-111614-6
.518 .392
10 13.16 9.96 111614-1
.596 .470
12 15.14 11.94 1-111614-7
.676 .550
14 17.17 13.97 111614-2
.755 .629
16 19.18 15.98 111614-3
.912 .786
20 23.16 19.96 111614-4
.991 .865
22 25.17 21.97 1-111614-5
1.070 .944
24 27.18 23.98 111614-5
1.148 1.022
26 29.16 25.96 111614-6
1.306 1.180
30 33.17 29.97 111614-7
1.463 1.337
34 37.16 33.96 111614-8
1.700 1.574
40 43.18 39.98 111614-9
1.857 1.731
44 47.17 43.97 1-111614-0
2.093 1.967
50 53.16 49.96 1-111614-1
Strain Relief for 2 mm
Receptacle Connectors
Material and Finish
Glass-filled polyester, black
Related Product Data
2 mm Receptacle Connectors —
pages 16 and 17
B
Typ.
.030
[0.76] Typ.
.020
[0.51] Typ.
.015
[0.38] Rad. Typ. .130
[3.30]
A
.132
[3.35]
Typ.
.201
[5.11] Typ.
Typ.
Typ.
.161
[4.09]
.139
[3.53]
Typ.
.082
[2.08]
Typ.
.040
[1.02]
.276
[7.01]
Typ.
Typ.
.056
[1.42]
Note: All part numbers are RoHS compliant.
69
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Accessories (Continued)
Accessories
Strain Relief for 622 and
636 Series Female Socket
Connectors
Material and Finish
Glass-filled PBT, see table for color
Related Product Data
Female Socket Connectors —
pages 52 and 53
A
.236
[6.00]
.555
[14.10]
Part Number
No. of Dimension Color TE Connectivity T&B
Pos. C (Ref. Only)
6.477 Blue 2-1437023-9 622-0631
12.12 Black 1-1437026-9 636-0631
10 .677 Blue 4-1437023-7 622-1031
17.20 Black 3-1437026-9 636-1031
14 .877 Blue 7-1437023-1 622-1431
22.28 Black 6-1437026-6 636-1431
16 .977 Blue 8-1437023-9 622-1631
24.82 Black 8-1437026-5 636-1631
20 1.177 Blue 1437024-5 622-2031
29.90 Black 1437027-7 636-2031
24 1.377 Blue 1-1437024-6 622-2431
34.98 Black 5-1437011-3 636-2431
26 1.477 Blue 2-1437024-8 622-2631
37.52 Black 3-1437027-4 636-2631
30 1.677 Blue 4-1437024-0 622-3031
42.60 Black 6-1437011-6 636-3031
34 1.877 Blue 5-1437024-3 622-3431
47.68 Black 8-1437027-0 636-3431
40 2.177 Blue 8-1437024-3 622-4031
55.30 Black 3-1437028-4 636-4031
50 2.677 Blue 1-1437025-2 622-5031
68.00 Black 6-1437028-8 636-5031
60 3.177 Black 9-1437028-5 636-6031
80.70
64 3.377 Blue 4-1437025-0 622-6431
85.78 Black 1437029-2 636-6431
Note: These part numbers are listed on TE customer drawing 1-1437026-9.
70
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Application Tooling
Ribbon Cable Assembly Machines (R-CAM)
The R-CAM 4, pictured
above, is the newest fully
automatic Ribbon Cable
Assembly Machine for
producing and testing
daisy-chained ribbon cable
assemblies. Enhancements
of this model include the
capability to process pre-
manufactured slit-and-twist
cable and the ability to
produce assemblies with up
to 10 connectors.
The R-CAM 2A, 3A, and
4 terminate 28 AWG
[0.08 mm2], .050 [1.27]
centerline cable to a variety
of connectors. The R-CAM 4
will also terminate 30 AWG
[0.05 mm2] .025 [0.64] cen-
terline cable.
All of the R-CAM models
automatically perform an
in-process electrical test of
all circuits for opens and
shorts. In addition, all mod-
els automatically test the
assembly for high-voltage
breakdown up to 1,000
volts, depending on the
machine and connector
style. The purpose of this
test is to detect gaps that
may have been created dur-
ing assembly that could
eventually short out when
in use. If an assembly fails
any of these tests, the
machine will shear the
cable off at that point and
automatically discard it into
an alternate bin.
These machines are pro-
grammed and operated
with an interactive touch-
screen that allows operators
to access manual, set-up,
run, and edit modes
through easy-to-follow
menu-driven prompts.
Self-diagnostics shut
down the machine if a
malfunction — such as
misloaded connectors or
incorrectly fed cable —
is detected, pinpoint the
malfunction, and identify it
on the touchscreen.
Models 2A and 3A are avail-
able in 120 or 220 VAC, 8 A,
Product Facts
■Terminates 28 AWG
[0.08 mm2] .050 [1.27]
centerline and 30 AWG
[0.05 mm2] .025 [0.64]
centerline cable to a variety
of connectors
■Automatic in-process
electrical testing — tests all
circuits for opens, shorts
and high-voltage breakdown
(up to 1,000 volts for
receptacles, 800 volts for
card edge connectors and
300 volts for .025 [0.64]
centerline connectors);
rejects cable assemblies
failing any of these tests
■Operated by a user-friendly,
interactive touchscreen —
or a keyboard on the
R-CAM 4
■Self-diagnostics shut
down the machine when a
malfunction occurs, pinpoint
the malfunction, and
identify it on the screen
■Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request.
50 or 60 Hz. Model 4 oper-
ates at 120 or 220 VAC, 50-
60 Hz, single phase, 15A.
The R-CAM 2A and 3A
require a minimum air sup-
ply of 80 psi [5.52 bar] at
8 scfm [0.0038m3/s]. The
R-CAM 4 requires 80 psi
[5.52 bar] at 12 scfm
[0.0057 m3/s].
Need more information?
For more information,
specifically about tooling,
call TE at the numbers listed
below.
ISO
Certified
9001
71
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Application Tooling
Comparison of R-CAM 2A, R-CAM 3A and R-CAM 4
Machine Model
Part Number*
Cable Size
Cable Assembly
Configurations
(Refer to page 73)
Production Rates
(Refer to page 72)
Size
Programmable
Testing
Changeover
R-CAM 2A
760700-❑
28 AWG [0.08 mm2],
.050 [1.27] centerline
Maximum cable length of 48 [1 220]
Produces one- to four-connector assem-
blies with unterminated tail lengths up to
12 [305]
Trailing connectors can be oriented up or
down
—
Depending on cable lengths, can apply
and test up to 1 670 connectors per hour
108 [2 745] W x 54 [1 370] D x
60 [1 525] H; 750 lb [340 kg]
Operated and programmed by a
touchscreen
Parameters for up to 130 cable assem-
blies can be retained in memory
Another menu displays production totals
or a log of the machine events
Automatically stops after each or three
consecutive assemblies are rejected, as
programmed by the operator
Requires an average of 25 minutes,
depending on assembly size
R-CAM 3A
761900-❑
28 AWG [0.08 mm2],
.050 [1.27] centerline
Maximum cable length of 105 [2 665]
Produces one- or two-connector assem-
blies with unterminated tail lengths up to
24 [610]
Trailing connectors can be oriented up or
down
—
Depending on cable lengths, can apply
and test up to 2 000 connectors per hour
48 [1 220] W x 48 [1 220] D x
62 [1 575] H; 630 lb [286 kg]
Operated and programmed by a
touchscreen
Parameters for up to 150 cable assem-
blies can be retained in memory
Another menu displays production totals
or a log of the machine events
Automatically stops when either a con-
secutive number of assemblies or a
percentage of the batch run are rejected,
as programmed by the operator
Requires an average of 15 minutes,
depending on assembly size
R-CAM 4
318800-❑
28 AWG [0.08 mm2],
.050 [1.27] centerline and
30 AWG [0.05 mm2],
.025 [0.64] centerline
Maximum cable length of 100 [2 540]
Produces one- to 10-connector assem-
blies with unterminated tail lengths up to
24 [610]
Trailing connectors can be oriented up or
down
Automatically processes and tests
assemblies produced with pre-
manufactured slit-and-twist cable
Depending on cable lengths, can apply
and test up to 1 050 connectors per hour
68 [1 730] W x 58 [1 475] D x
72 [1 830] H; 1 300 lb [590 kg]
Operated and programmed by a
touchscreen or a keyboard
Parameters for up to 1 000 cable assem-
blies can be retained in memory
—
Automatically stops each time a
malfunction is detected
Requires an average of 20 minutes to
1 hour, depending on assembly size
and type
*Note: Machine may require accessories. Before ordering, contact TE at the numbers listed below.
72
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Application Tooling
Typical Production Rates (Assemblies/Hour)
Tooling for Number of Positions
Connectors R-CAM 2A R-CAM 3A R-CAM 4
Ultra Novo Receptacles —— 40
AMPLIMITE .050 Series Connectors —— 68
AMPLIMITE HDF-20 D-Sub. Plugs 15, 25, 37 9, 15, 25, 37 68 and 80 (Lead and Trail Modules)
Receptacles 68 and 80 (Lead Module Only)
.100 x .100 DIP Plugs One End Only, 20–64 One End Only, 10–64 Available in future
Card Edge Connectors* 20–64 10–64 20–50
(10–64 Available in future)
Novo Receptacles* 20–64 10–64 10-64
2 mm Receptacles — 12–50 —
Universal I/O Pin Connectors One End Only, 20–64 — Trail Module Only
* Supplied with the R-CAM 2A and R-CAM 3A only.
Reel fed version.
Order Connector Specific Tooling Packages / Feed Shear Tooling separately.
Machine Connectors Length
Model Per Assembly 4[100] 8 [205] 24 [160] 48 [1 220] 100 [2 540]
1 665 620 ———
R-CAM 2A 2570 500 405 300 —
3475 460 375 280 —
4—420 360 255 —
R-CAM 3A 2 1 075 950 780 660 500
4— 275 265 255 —
R-CAM 4 5— 205 200 190 —
6—170 165 160 —
10 ——— 115 105
Available Tooling Note: Call TE at the numbers listed below for part numbers or availability.
Products Applied
AMPLIMITE HDF-20 D-Sub. Plugs AMPLIMITE HDF-20 D-Sub. Receptacles .100 x .100 DIP Plugs Card Edge Connectors
Novo Receptacles 2 mm Receptacles Universal I/O Pin Connectors Pre-manufactured Slit-and-Twist Cable
(R-CAM 4 only)
Note: For more product information, call TE at the numbers listed below.
Note: Actual production rates may vary depending on the cable assembly configuration.
73
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Application Tooling
Cable Assembly Configurations
2.70 to 48
[70 to 1 220]
end-to-end
0 to 8
[0 to 205]
center-to-center
1.74 to 105
[45 to 2 665]
end-to-end
1.74 to 105
[45 to 2 665]
end-to-end
1.74 to 105
[45 to 2 665]
end-to-end
0 to 24
[0 to 610]
0 to 24
[0 to 610]
2.70 to 8
[70 to 205]
end-to-end
1.60 to 100
[40 to 2 540]
center-to-end
1.60 to 100
[40 to 2 540]
center-to-center
center-to-center center-to-center center-to-center
R-CAM 2A
R-CAM 3A
R-CAM 4
1.60 Min.
[40 Min.]
1.25 Min.
[30 Min.]
3 Min.
[75 Min.]
1.50 Min.
[35 Min.]
0 to 24
[0 to 610]
74
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Application Tooling
Application Tooling
Manual Arbor Frame
Assembly,
Part No. 91085-2
Pneumatic Auto-Cycle
Unit, Part No. 91112-3
Hand Tool Kit—Part No. 768340-1
Terminating kit for .050 [1.27] centerline ribbon cable with
28 or 26 AWG [0.08 or 0.15 mm2] stranded or solid, or
30 AWG [0.05 mm2] solid conductors. Includes commercial
grade hand tool with ratchet control for complete termination
cycle, base assembly, bench-mount, tooling sets for stan-
dard and Novo receptacles, card edge connectors and D-
Sub HDF low-profile connectors, and a carrying case.
Bench frame for applying a
variety of IDC connectors,
including AMPMODU MT
and CHAMP. Features
adjustable ram and handle,
and a slide base. Tooling is
mounted to the ram and into
the tracks of the base plate.
Basically an air-powered
version of Manual Arbor
Frame Assembly 91085-2.
Features adjustable ram
and cycle time, and auto-
matic cycling when the
lower assembly is slid into
the frame to the rear of the
base plate. Includes a
guard around the frame
opening.
Pneumatic Foot Pedal Unit
Part No. 91112-2
Foot pedal indicates cycle—
features adjustable ram and
cycle time.
Tooling Instruction Sheets
408-7777—Manual Arbor Frame
Assembly
408-6732—Pneumatic Auto-Cycle
Assembly
408-9828—Hand Tool Kit 768340-1
for Connector-Specific Kits
75
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Low Profile Headers
Low Profile Headers
Product Facts
■Available in selected
positions 10 thru 60
■Flame retardant,
thermoplastic housings,
94V-0 rated
■Vertical and right-angle
versions available in double
row configurations
■Available in .025 [0.64]
square drawn wire posts
■Wash out clearance for flux
removal
■Mates with Ribbon Cable
Connectors
■Available with and without
eject latches
■Available with and without
“kinked” soldertails for PCB
retention
■Headers are recognized
under the Component
Program of Underwriters
Laboratories Inc.
File No. E28476
■Headers are certified by
Canadian Standards
Association,
File No. LR 7189
■Low profile IDC headers are
recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E60980, Vol. 5
R
R
R
Performance
Characteristics
Electrical
Insulation Resistance —
5,000 megohms minimum initial
Dielectric Withstanding Voltage —
1,000 V rms at sea level
Current — 1 ampere maximum
per contact
Operating Voltage — 250 VAC
Environmental
Operating Temperature —
-65°C to +105°C
Technical Documents
Product Specifications
108-40018
76
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Low Profile Headers
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines
Material and Finish
Housing — Glass-filled nylon,
UL 94V-0 rated, black
Posts — Brass, plated as follows:
Plating A — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Plating B — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
AMPMODU Board Mount
Receptacles
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series —
pages 48-55
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End)
.045
[1.14]
.165
[4.19]
.100
[2.54]
.025 ± .001
[0.64 ± 0.03]
.360
[9.14]
.130
[3.30]
A
B
Typ.
Pin 1
Pin 2
.041
[1.04] .388
[9.86]
.185 ± .010
[4.70 ± 0.25]
.185
[4.70]
.100
[2.54]
.120 ± .015
[3.05 ± 0.38]
.025 ± .001
[0.64 ± 0.03]
.015
.010
[0.38]
0.25
.240
[6.10]
Typ.
Recommended PC Board Hole Layout
For Manual Insertion
.100
[2.54]
.035 ± .003
[0.89 ± 0.08]
.100
[2.54]
Typ.
Dia. Typ.
No. of Dimensions Post Plating/Part Nos.
Pos. AB Plating A Plating B
10 .800 [20.32] .400 [10.16] 5103309-1 5103308-1
14 1.000 [25.40] .600 [15.24] 5103309-2 5103308-2
16 1.100 [27.94] .700 [17.78] 5103309-3 5103308-3
20 1.300 [33.02] .900 [22.86] 5103309-5 5103308-5
24 1.500 [38.10] 1.100 [27.94] — 1-5103308-3
26 1.600 [40.64] 1.200 [30.48] 5103309-6 5103308-6
34 2.000 [50.80] 1.600 [40.64] 5103309-7 5103308-7
40 2.300 [58.42] 1.900 [48.26] 5103309-8 5103308-8
50 2.800 [71.12] 2.400 [60.96] 1-5103309-0 1-5103308-0
60 3.300 [83.82] 2.900 [73.66] — 1-5103308-2
+.000
-.010
+0.00
[-0.25]
77
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Low Profile Headers
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines (Continued)
Material and Finish
Housing — Glass-filled nylon,
UL 94V-0 rated, black
Posts — Brass, plated as follows:
Plating A — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Plating B — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End)
Recommended PC Board Hole Layout
For Manual Insertion
.100
[2.54] Typ.
Dia. Typ.
.100
[2.54]
.035 ± .003
[0.89 ± 0.08]
A
B
Typ.
Typ.
.135+.020
-.010
3.42+0.51
-0.25
+.000
-.010
+0.00
[-0.25]
.185
[4.69]
.360
[9.14]
.015
.010
0.38
[0.25]
.240
[6.09]
.025 ± .001
[.635 ± 0.03]
.130
[3.31]
.185 ± .010
[4.69 ± 0.25]
.165
[4.19]
.025 ± .001
[0.64 ± 0.03]
.388
[9.86]
.100
[2.54]
Typ.
Typ.
Typ.
•
Position No.1
Indicator
.100
[2.54]
.123
[3.12]
[]
No. of Dimensions Post Plating/Part Nos.
Pos. AB Plating A Plating B
10 .800 [20.32] .400 [10.16] 5103311-1 5103310-1
14 1.000 [25.40] .600 [15.24] 5103311-2 5103310-2
16 1.100 [27.94] .700 [17.78] 5103311-3 5103310-3
20 1.300 [33.02] .900 [22.86] 5103311-5 5103310-5
26 1.600 [40.64] 1.200 [30.48] 5103311-6 5103310-6
34 2.000 [50.80] 1.600 [40.64] 5103311-7 5103310-7
40 2.300 [58.42] 1.900 [48.26] 5103311-8 5103310-8
50 2.800 [71.12] 2.400 [60.96] 1-5103311-0 1-5103310-0
60 3.300 [83.82] 2.900 [73.66] 1-5103311-2 —
Pin 1
Pin 2
78
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Low Profile Headers
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines & “Kinked” Solder Tails for
PCB Retention
No. of Dimensions Post Plating
Pos. AB
Part Nos.
10 .800 [20.32] .400 [10.16] 5104338-1
14 1.000 [25.40] .600 [15.24] 5104338-2
16 1.100 [27.94] .700 [17.78] 5104338-3
20 1.300 [33.02] .900 [22.86] 5104338-4
24 1.500 [38.10] 1.100 [27.94] 5104338-5
26 1.600 [40.64] 1.200 [30.48] 5104338-6
34 2.000 [50.80] 1.600 [40.64] 5104338-7
40 2.300 [58.42] 1.900 [48.26] 5104338-8
50 2.800 [71.12] 2.400 [60.96] 5104338-9
60 3.300 [83.82] 2.900 [73.66] 1-5104338-0
Material and Finish
Housing — Glass-filled PPA,
UL 94V-0 rated, black
Posts — Brass, plated as follows:
Plating — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
AMPMODU Board Mount
Receptacles
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End) with Board
Retention Feature
.045
[1.14]
.165
[4.19]
.100
[2.54]
.025±.001
[0.64±0.03]
.360
[9.14]
.130
[3.30]
B
Typ.
.041
[1.04] .388
[9.86]
.185
[4.69]
2 Plcs.
.185
[4.69] 2 Plcs.
.100
[2.54]
.120 ± .015
[3.05 ± 0.38]
.025 ± .001
[0.64 ± 0.03]
Recommended PC Board Hole Layout
For Manual Insertion
.100
[2.54]
.040 ± .003
[1.02 ± 0.08]
.100
[2.54]
Typ.
Dia. Typ.
.025
.020
[0.64]
0.51
.240
[6.10]
A
+.005
-.010
+0.13
[-0.25]
Pin 1
Pin 2
79
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Low Profile Headers
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines & “Kinked” Solder Tails for
PCB Retention (Continued)
No. of Dimensions Post Plating
Pos. AB
Part Nos.
10 .800 [20.32] .400 [10.16] 5104340-1
14 1.000 [25.40] .600 [15.24] 5104340-2
16 1.100 [27.94] .700 [17.78] 5104340-3
20 1.300 [33.02] .900 [22.86] 5104340-4
24 1.500 [38.10] 1.100 [27.94] 5104340-5
34 2.000 [50.80] 1.600 [40.64] 5104340-7
40 2.300 [58.42] 1.900 [48.26] 5104340-8
50 2.800 [71.12] 2.400 [60.96] 5104340-9
Recommended PC Board Hole Layout
For Manual Insertion
Material and Finish
Housing — Glass-filled PPA,
UL 94V-0 rated, black
Posts — Brass, plated as follows:
Plating — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Typ.
.165
[4.19] .025±.001
[0.64±0.03]
.388
[9.86]
B
Typ.
.185
[4.69]
.045
[1.14]
.360
[9.14]
.130
[3.30]
.185
[4.69]
2Plcs.
.100
[2.54]
2 Plcs.
2 Plcs.
.125+.020
-.010
3.18+0.51
-0.25
Typ.
.240
[6.09]
.025±.001
[.635±0.03]
.123
[3.12]
.100
[2.54]
•
Position No.1
Indicator
.100
[2.54]
.040±.003
[1.02±0.08]
.100
[2.54]
T
yp.
Dia. Typ.
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End) with Board
Retention Feature
[]
A
+.005
-.010
+0.13
[-0.25]
.025
.020
[0.64]
0.51
Pin 1
Pin 2
80
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
IDC Low Profile Headers
IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches,
Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Material and Finish
Housing — Glass-filled PBT,
UL 94V-0 rated, black
Posts — Brass or phosphor bronze,
plated as follows:
Plating — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End)
Part Numbers
No. of Dimensions Pin Header with Short Latches Pin Header with Long Latches
Pos. AB (Mates with Receptacles (Mates with Receptacles
without Strain Relief) with Strain Relief)
10 .800 .400 1761608-3 1761606-3
20.32 10.16
14 1.000 .600 1761608-5 1761606-5
25.40 15.24
16 1.100 .700 1761608-6 1761606-6
27.94 17.78
20 1.300 .900 1761608-7 1761606-7
33.02 22.86
24 1.500 1.100 1761608-8 1761606-8
38.10 27.94
26 1.600 1.200 1761608-9 1761606-9
40.64 30.48
30 1.800 1.400 — 1-1761606-0
45.72 35.56
34 2.000 1.600 1-1761608-1 1-1761606-1
50.80 40.64
40 2.300 1.900 1-1761608-3 1-1761606-3
58.42 48.26
50 2.800 2.400 1-1761608-5 1-1761606-5
71.12 60.96
60 3.300 2.900 1-1761608-6 1-1761606-6
83.82 73.66
B
A
.362
[9.19]
.254 ± .006
[6.45 ± 0.15]
.025 ± .001
[0.64 ± 0.03]
.025 ± .001
[0.64 ±0.03]
.102 ±.015
[2.59 ± 0.38]
.404 ±.006
[10.26 ± 0.15]
Ø .035 ± .003
[0.89 ± 0.08]
Position #1 Indicator
Latch
Housing
Post
Max.
.888 ± .012
[22.56 ± 0.30]
For Long
Eject Latch
.728 ±.012
[18.49 ± 0.30]
For Short
Eject Latch
.100
[2.54]
.100
[2.54]
.100
[2.54]
Recommended PC Board Layout
Ø .031
[0.79]
Pin 1
Pin 2
.237 ± .007
[6.02 ± 0.18]
Latching
Height
.575
[14.61]
.427
[10.85] Short
Long
81
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
IDC Low Profile Headers
Material and Finish
Housing — Glass-filled PBT,
UL 94V-0 rated, black
Posts — Brass or phosphor bronze,
plated as follows:
Plating — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End)
Part Numbers
No. of Dimensions Pin Header with Short Latches Pin Header with Long Latches
Pos. AB (Mates with Receptacles (Mates with Receptacles
without Strain Relief) with Strain Relief)
10 .800 .400 1761609-3 1761607-3
20.32 10.16
14 1.000 .600 1761609-5 1761607-5
25.40 15.24
16 1.100 .700 1761609-6 1761607-6
27.94 17.78
20 1.300 .900 1761609-7 1761607-7
33.02 22.86
26 1.600 1.200 1761609-9 1761607-9
40.64 30.48
34 2.000 1.600 1-1761609-1 1-1761607-1
50.80 40.64
40 2.300 1.900 1-1761609-3 1-1761607-3
58.42 48.26
50 2.800 2.400 1-1761609-5 1-1761607-5
71.12 60.96
60 3.300 2.900 1-1761609-6 1-1761607-6
83.82 73.66
B
A
U
U
.362
[9.19]
.254 ± .006
[6.45 ± 0.15]
.025 ±.001
[0.64 ± 0.03]
.025 ±.001
[0.64 ± 0.03]
.030
[0.76]
.100
[2.54]
.404 ± .006
[10.26 ± 0.15]
Ø .035 ± .003
[0.89 ± 0.08]
Position #1 Indicator
Latch
Housing
Post
Max.
.888 ± .012
[22.56 ± 0.30]
For Long
Eject Latch
.728 ±.012
[18.49 ± 0.30]
For Short
Eject Latch
.100
[2.54]
.100
[2.54]
.100
[2.54]
Recommended PC Board Layout
Section U-U
Ø .031
[0.79]
.237 ± .007
[6.02 ± 0.18]
.102 ± .010
[2.59 ± 0.25]
Latching
Height
.575
[14.61]
.427
[10.85] Short
Long
Pin 1
Pin 2
IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches,
Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
82
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
IDC Low Profile Headers
IDC Low Profile Ejection Style Pin Headers, Center Polarized,
.100 x .100 [2.54 x 2.54] Centerlines
Material and Finish
Housing and Eject Latches —
PBT, UL 94V-0 rated, blue
Posts — Phosphor bronze, plated as
follows:
Plating — Duplex plated, .000030
[0.00076] min. gold on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End)
Part Numbers
Dim. C No. of Dimensions Pin Header Pin Header with Short Latches Pin Header with Long Latches
(Soldertail Pos. ABwithout (Mates with Receptacles (Mates with Receptacles
Length) Latches without Strain Relief) with Strain Relief)
10 1.250 [31.75] .400 [10.16] 1761693-3 1761685-3 1761686-3
14 1.450 [36.83] .600 [15.24] —— 1761686-5
16 1.550 [39.37] .700 [17.78] — 1761685-6 1761686-6
20 1.750 [44.45] .900 [22.86] — 1761685-7 1761686-7
24 1.950[49.53] 1.100 [27.94] 1761693-8 1761685-8 1761686-8
.102 26 2.050 [52.07] 1.200 [30.48] — 1761685-9 1761686-9
2.59 30 2.250 [57.15] 1.400 [35.56] — 1-1761685-0 —
34 2.450 [62.23] 1.600 [40.64] 1-1761693-1 1-1761685-1 1-1761686-1
40 2.750 [69.85] 1.900 [48.26] — 1-1761685-3 1-1761686-3
50 3.250 [82.55] 2.400 [60.96] — 1-1761685-5 1-1761686-5
60 3.750 [95.25] 2.900 [73.66] 1-1761693-6 1-1761685-6 —
10 1.250 [31.75] .400 [10.16] 1761694-3 1761687-3 —
14 1.450 [36.83] .600 [15.24] —— —
16 1.550 [39.37] .700 [17.78] —— —
20 1.750 [44.45] .900 [22.86] — 1761687-7 1761688-7
.165 24 1.950[49.53] 1.100 [27.94] —— 1761688-8
4.19 26 2.050 [52.07] 1.200 [30.48] 1761694-9 1761687-9 1761688-9
34 2.450 [62.23] 1.600 [40.64] — 1-1761687-1 1-1761688-1
40 2.750 [69.85] 1.900 [48.26] — 1-1761687-3 —
50 3.250 [82.55] 2.400 [60.96] —— 1-1761688-5
Note: All part numbers are RoHS compliant.
B
A
U
U
.013
[0.33]
.025 ± .001
[0.63 ± 0.03]
.025 ± .001
[0.63 ± 0.03]
Ø .035 ± .003
[0.89 ± 0.08]
Position #1 Indicator
Eject Latches
Not Shown in
To p and Side
View for Clarity
.100
[2.54]
.100
[2.54]
.100
[2.54]
.350
[8.89] .013
[0.33]
Recommended PC Board Layout
With Latches
Section U-U
Ø .031
[0.79]
Max.
.240 ± .010
[6.10 ± 0.25]
.826 ± .020
[20.98 ± 0.51]
.665 ±.020
[16.89 ± 0.51]Short
Long
.576 ± .006
[14.62 ± 0.15]
.419 ± .006
[10.64 ± 0.15]Short
Long
C± .015
[± 0.38]
+ .010
– .004
+ 0.25
– 0.10
.252
[6.40 ]
+ .005
– .010
+ 0.13
– 0.25
.350
[8.89 ]
A
U
U
.025 ± .001
[0.63 ± 0.03]
Position #1 Indicator
.350
[8.89] .013
[0.33]
Without Latches
Pin 1
Pin 2
83
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
IDC Low Profile Headers
IDC Low Profile Ejection Style Pin Headers, Center Polarized,
.100 x .100 [2.54 x 2.54] Centerlines (Continued)
Material and Finish
Housing and Eject Latches —
PBT, UL 94V-0 rated, blue
Posts — Phosphor bronze, plated as
follows:
Plating — Duplex plated, .000030
[0.00076] min. gold on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End)
Part Numbers
Dim. C No. of Dimensions Pin Header with Long Latches
(Soldertail Pos. AB(Mates with Receptacles
Length) with Strain Relief)
16 1.550 [39.37] .700 [17.78] 1761690-6
.102 24 1.950[49.53] 1.100 [27.94] 1761690-8
2.59 26 2.050 [52.07] 1.200 [30.48] 1761690-9
30 2.250 [57.15] 1.400 [35.56] 1-1761690-0
60 3.750 [95.25] 2.900 [73.66] 1-1761690-6
.165 10 1.250 [31.75] .400 [10.16] 1761692-3
4.19 34 2.450 [62.23] 1.600 [40.64] 1-1761692-1
40 2.750 [69.85] 1.900 [48.26] 1-1761692-3
B
A
U
U
.013
[0.33]
.025 ± .001
[0.63 ± 0.03].025 ± .001
[0.63 ± 0.03]
Ø .035 ± .003
[0.89 ± 0.08]
Position #1 Indicator
Eject Latches
Not Shown in
To p and Side
View for Clarity
.100
[2.54]
.030
[0.76]
.100
[2.54]
.100
[2.54]
.100
[2.54]
.350
[8.89] .013
[0.33]
Recommended PC Board Layout
With Latches
Section U-U
Ø .031
[0.79]
Max.
.826 ± .020
[20.98 ± 0.51]
Long
.665 ± .020
[16.89 ± 0.51]
Short
.576 ± .006
[14.62 ± 0.15]
.419 ± .006
[10.64 ±0.15]Short
Long .240 ±.010
[6.10 ± 0.25]
+.010
–.004
+0.25
–0.10
.252
[6.40 ]
+ .005
– .010
+ 0.13
– 0.25
.350
[8.89 ]
A
U
U
.025 ± .001
[0.63 ±0.03]
Position #1 Indicator
.350
[8.89] .013
[0.33]
Without Latches
C± .015
[± 0.38]
Pin 1
Pin 2
84
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Military, Center and Dual Polarized, Vertical Mount
Universal Ejection Style Pin Headers
Universal Ejection Style Pin Headers, Military, Center and
Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Vertical PCB Mount
.025 [0.64] Sq. Posts
(Mating End)
Material and Finish
Housing & Latches—Black PBT or
nylon, UL 94V-0 rated
Contacts — Brass; duplex plated (See
chart, page 85)
Related Product Data
Mateable Receptacles —
pages 48-55
Accessories —
Snap-In Polarizer — page 63
Technical Documents
Product Specifications
108-40018 Pin Headers
Pin Header
with Latches
Pin Header
without Latches
No. of Dimensions
Positions ABCDEF
.700 1.100 1.260 .860 1.100 .400
10 17.78 27.94 32.00 21.84 27.94 10.16
.900 1.300 1.460 1.060 1.300 .600
14 22.86 33.02 37.08 26.92 33.02 15.24
1.000 1.400 1.560 1.180 1.400 .700
16 25.40 35.56 39.62 29.46 35.56 17.78
1.200 1.600 1.760 1.360 1.800 .900
20 30.48 40.64 44.70 34.54 40.64 22.86
1.400 1.800 1.960 1.560 1.800 1.100
24 35.56 45.72 49.78 39.62 45.72 27.94
1.500 1.900 2.060 1.660 1.900 1.200
26 38.10 48.26 52.32 42.16 48.26 30.48
1.700 2.100 2.260 1.860 2.100 1.400
30 43.18 53.34 57.40 47.24 53.34 35.56
1.900 2.300 2.460 2.060 2.300 1.600
34 48.26 58.42 62.48 52.32 58.42 40.64
2.200 2.600 2.760 2.360 2.600 1.900
40 55.88 66.04 70.10 59.94 66.04 48.26
2.700 3.100 3.260 2.860 3.100 2.400
50 68.58 78.74 82.80 72.64 78.74 60.98
3.200 3.600 3.760 3.360 3.600 2.900
60 81.28 91.44 95.50 85.34 91.44 73.66
3.400 3.800 3.960 3.560 3.800 3.100
64 86.36 96.52 100.58 90.42 96.52 78.74
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot
for snap-in polarizer (military polarization), located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual
polarization, located as shown.
Notes: 3. For information regarding latch/pin header applications and
for ordering latches separately, refer to page 96.
.100
[2.54]
.150
[3.81]
.253
[6.43]
.336
[8.53]
.315
[8.00]
B
C
A
.100
[2.54]
.025
[0.64]
D
.096
[2.44] Dia.
2Plc.
.106
[2.74]
.025
[0.64]
.549
[13.94]
.165
[4.19] .190
[4.83] .240
[6.10]
.107
[2.72] .289
[7.34] .110
[2.79] or
.155
[3.94]
Solder Tail
.050
[1.27]
.150
[3.81]
Ø .025
[0.64]
.195
[4.95]
•
Position No.1
Indicator
Pin 2
Pin 1
85
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Military, Center and Dual Polarized, Vertical Mount
Universal Ejection Style Pin Headers
Universal Ejection Style Pin Headers, Military, Center and
Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Contact Pin Header w/ Pin Header w/
Soldertail No. of Finish Pin Header Short Latches Long Latches
Length Positions (Plating without (Mates with AMP-LATCH (Mates with AMP-LATCH
Code) Latches Receptacles without Receptacles with
Strain Relief) Strain Relief)
10 A 5102153-1 5499910-1 5499922-1
B5102154-1 5499160-1 5499206-1
14A5102153-2 5499910-2 5499922-2
B 5102154-2 5499160-2 5499206-2
16 A 5102153-3 5499910-3 5499922-3
B5102154-3 5499160-3 5499206-3
20 A5102153-4 5499910-4 5499922-4
B 5102154-4 5499160-4 5499206-4
24A 5102153-5 5499910-5 5499922-5
B5102154-5 — 5499206-5
26 A 5102153-6 5499910-6 5499922-6
.110 B 5102154-6 5499160-6 5499206-6
2.79 30 A5102153-7 5499910-7 5499922-7
B5102154-7 — 5499206-7
34 A 5102153-8 5499910-8 5499922-8
B 5102154-8 5499160-8 5499206-8
40A5102153-9 5499910-9 5499922-9
B 5102154-9 5499160-9 5499206-9
50 A 1-5102153-0 1-5499910-0 1-5499922-0
B1-5102154-0 1-5499160-0 1-5499206-0
60 A— — 1-5499922-1
B 1-5102154-1 — 1-5499206-1
64 A 1-5102153-2 — 1-5499922-2
B 1-5102154-2 1-5499160-2 1-5499206-2
10 A 5102155-1 — 5499923-1
B 5102156-1 5499374-1 5102321-1
14 A— — —
B 5102156-2 5499374-2 5102321-2
16 A 5102155-3 — 5499923-3
B 5102156-3 — 5102321-3
20 A— — 5499923-4
B 5102156-4 5499374-4 5102321-4
24 A— — 5499923-5
B 5102156-5 5499374-5 5102321-5
26 A 5102155-6 — 5499923-6
.155 B 5102156-6 5499374-6 5102321-6
3.94 30 A— — 5499923-7
B 5102156-7 — 5102321-7
34 A 5102155-8 5499911-8 5499923-8
B 5102156-8 5499374-8 5102321-8
40 A 5102155-9 5499911-9 5499923-9
B 5102156-9 5499374-9 5102321-9
50 A 1-5102155-0 — 1-5499923-0
B 1-5102156-0 1-5499374-0 1-5102321-0
60 A— — 1-5499923-1
B 1-5102156-1 — 1-5102321-1
64 A 1-5102155-2 — 1-5499923-2
B 1-5102156-2 — 1-5102321-2
Plating Code A — Gold flash over palladium-nickel plate, .000015 [0.00038] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000015 [0.00038]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000030 [0.00076]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Vertical PCB Mount
.025 [0.64] Sq. Posts
(Mating End) (Continued)
86
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Military, Center and Dual Polarized, Vertical Mount
Universal Ejection Style Pin Headers
Universal Ejection Style Pin Headers, Military, Center and
Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Mounting Information
4-24 self-tapping screws
and 2-56 bolts and nuts
are available for mounting
straight-thru pin headers
of pc boards. Typical appli-
cations and part nos. for
ordering this hardware are
presented below.
Note: 2-56 bolts and nuts may be
used to mount pin headers with and
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed.
Recommended Mounting Hole Pattern
For Vertical PCB Mount Headers
PC board thicknesses are : .062 [1.57] for .110 [2.79] long posts,
.125 [3.18] for .155 [3.94] long posts.
Pin Header Mounting using 4-24 Self-Tapping Screws:
Part No. 19156-1 (for .062 [1.57] Thick PC Board)
Part No. 19156-2 (for .093 [2.36] Thick PC Board)
Part No. 19156-3 (for .125 [3.18] Thick PC Board)
Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 746383-1 (Bolt Only)
Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
.106
[2.88] Dia.
.035
[0.89] Dia.
.100
[2.54]
.350
[8.89]
.100
[2.54]
.060
[1.52]
E
F
4-24
Self-Tapping
Screw
(2 Req‘d.)
(For Nut & Bolt
hardware)
.116
[2.95] Dia.
(For Self-Tapping
Screw hardware)
Position No. 1
2-56
Bolt & Nut
(2 Each Req‘d.)
Latch
(See Note
at left.)
.256
[6.50]
87
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Military, Center and Dual Polarized
Universal Ejection Style Pin Headers with ACTION PIN Contacts
Universal Ejection Style Pin Headers with ACTION PIN Contacts, Military,
Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Vertical PCB Mount
.025 [0.64] Sq. Posts
(Mating End)
Material and Finish
Housing — Black PBT or nylon,
UL 94V-0 rated
Contacts—Copper alloy; duplex plated
(See chart, page 88)
Related Product Data
Mateable Receptacles —
pages 48-55
Accessories —
Snap-In Polarizer — page 63
Technical Documents
Product Specifications
108-40019 Pin Headers with
ACTION PIN Contacts
Application Specification
114-40020 AMP-LATCH Universal
Headers with ACTION PIN Contacts
Pin Header
without Latches
No. of Dimensions
Positions ABCDE
.700 1.100 1.260 1.100 .400
10 17.78 27.94 32.00 27.94 10.16
.900 1.300 1.460 1.300 .600
14 22.86 33.02 37.08 33.02 15.24
1.000 1.400 1.560 1.400 .700
16 25.40 35.56 39.62 35.56 17.78
1.200 1.600 1.760 1.600 .900
20 30.48 40.64 44.70 40.64 22.86
1.400 1.800 1.960 1.800 1.100
24 35.56 45.72 49.78 45.72 27.94
1.500 1.900 2.060 1.900 1.200
26 38.10 48.26 52.32 48.26 30.48
1.700 2.100 2.260 2.100 1.400
30 43.18 53.34 57.40 53.34 35.56
1.900 2.300 2.460 2.300 1.600
34 48.26 58.42 62.48 58.42 40.64
2.200 2.600 2.760 2.600 1.900
40 55.88 66.04 70.10 66.04 48.26
2.700 3.100 3.260 3.100 2.400
50 68.58 78.74 82.80 78.74 60.96
3.200 3.600 3.760 3.600 2.900
60 81.28 91.44 95.50 91.44 73.66
3.400 3.800 3.960 3.800 3.100
64 86.36 96.52 100.58 96.52 78.74
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-
in polarizer (military polarization), located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization,
located as shown.
Notes: 3. For information regarding latch/pin header applications and for
ordering latches separately, refer to page 96.
C
B
A
.150
[3.81] .165
[4.19]
.100
[2.54]
.190
[4.83]
.030
[0.76]
.025
[0.64] .174
[4.42] or .610
[15.49]
Tail
Length
.240
[6.10]
.107
[2.72] .289
[7.34]
.315
[8.00]
.253
[6.43]
Position No. 1
Indicator
.025
[0.64]
.549
[13.9]
.025
[0.64]
.150
[3.81]
.050
[1.27]
.336
[8.53]
Pin 2
Pin 1
88
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Military, Center and Dual Polarized
Universal Ejection Style Pin Headers with ACTION PIN Contacts
Universal Ejection Style Pin Headers with ACTION PIN Contacts, Military,
Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Mounting Information
4-24 self-tapping screws
and 2-56 bolts and nuts
are available for mounting
straight-thru pin headers
of pc boards. Typical appli-
cations and part nos. for
ordering this hardware are
presented on page 86.
Recommended Mounting Hole Pattern
For Vertical PCB Mount Header
With ACTION PIN Contacts
*For .080 [2.03] min. thick PCB refer to
Application Specification 114-40020 for hole
size and finish recommendations.
.106
[2.69]Dia.
*
.100
[2.54]
.350
[8.89]
.100
[2.54]
.060
[1.52]
E
D
Position No. 1
Contact Pin Header
Tail No. of Finish (without
Length Positions (Plating Code) Latches)
10 1658694-6
14 1658694-7
16 1658694-8
20 1658694-1
24 1658694-9
.174 26 B 1658694-2
[4.42] 30 1-1658694-0
34 1-1658694-1
40 1658694-3
50 1658694-4
64 1658694-5
10 1658695-2
14 1658695-3
16 1658695-4
20 1658695-5
.610 26 B 1658695-6
[15.49] 34 1658695-1
40 1658695-7
50 1658695-8
60 1658695-9
Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076]
min. total on the mating surfaces, .000100 [0.00254] min. tin plate on the tails,
over .000050 [0.00127] min nickel underplate or .000030 [0.00076] min. gold
on the mating surfaces, .000100 [0.00254] min. tin plate on the tails, over
.000050 [0.00127] min. nickel underplate.
89
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Military, Center and Dual Polarized, Right-Angle
Universal Ejection Style Pin Headers
Universal Ejection Style Pin Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Right-Angle PCB Mount
.025 [0.64] Sq. Posts
(Mating End)
Material and Finish
Housing & Latches — Black PBT or
nylon, UL 94V-0 rated
Contacts — Brass; duplex plated
(See chart, page 90)
Related Product Data
Mateable Receptacles —
pages 48-55
Accessories —
Snap-In Polarizer — page 63
Technical Documents
Product Specifications
108-40018 Pin Headers
Pin Header
with Latches
Pin Header
without Latches
No. of Dimensions
Positions ABC DEF
.700 1.100 1.260 .860 .860 .400
10 17.78 27.94 32.00 21.84 21.84 10.16
.900 1.300 1.460 1.060 1.060 .600
14 22.86 33.02 37.08 26.92 26.92 15.24
1.000 1.400 1.560 1.180 1.180 .700
16 25.40 35.56 39.62 29.46 29.46 17.78
1.200 1.600 1.760 1.380 1.380 .900
20 30.48 40.64 44.70 34.54 34.54 22.86
1.400 1.800 1.960 1.560 1.560 1.100
24 35.56 45.72 49.78 39.62 39.62 27.94
1.500 1.900 2.060 1.660 1.660 1.200
26 38.10 48.26 52.32 42.16 42.16 30.48
1.700 2.100 2.260 1.860 1.860 1.400
30 43.18 53.34 57.40 47.24 47.24 35.56
1.900 2.300 2.460 2.060 2.060 1.600
34 48.26 58.42 62.48 52.32 52.32 40.64
2.200 2.600 2.760 2.360 2.360 1.900
40 55.88 66.04 70.10 59.94 59.94 48.26
2.700 3.100 3.260 2.860 2.860 2.400
50 68.58 78.74 82.80 72.64 72.64 60.98
3.200 3.600 3.760 3.360 3.360 2.900
60 81.28 91.44 95.50 85.34 85.34 73.66
3.400 3.800 3.960 3.560 3.560 3.100
64 86.36 96.52 100.58 90.42 90.42 78.74
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for
snap-in polarizer (military polarization), located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization,
located as shown.
A
.100
[2.54]
.100
[2.54]
.100
[2.54]
.240
[6.10]
.038
[0.97]
.025
[0.64]
.025
[0.64]
.025
[0.64] Dia.
.253
[6.43]
.107
[2.72]
.150
[3.81]
.150
[3.81]
.315
[8.00]
.336
[8.53]
.050
[1.27]
.190
[4.83]
.108
[2.74]
.549
[13.94]
.195
[4.95]
.096
[2.44]
.110
[2.79] or
Typ.
.155
[3.94]
Typ.
Solder Tail
C
B
D
Pos. No. 1 Indicator
.289
[7.34]
.165
[4.19]
Pin 2
Pin 1
90
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Military, Center and Dual Polarized, Right-Angle
Universal Ejection Style Pin Headers
Universal Ejection Style Pin Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Contact Pin Header w/ Pin Header w/
Soldertail No. of Finish Pin Header Short Latches Long Latches
Length Positions (Plating without (Mates with (Mates with
Code) Latches Receptacles without Receptacles with
Strain Relief) Strain Relief)
10 A 5102159-1 5499913-1 5499786-1
B5102160-1 5499345-1 5499141-1
14A5102159-2 5499913-2 5499786-2
B— 5499345-2 5499141-2
16 A 5102159-3 5499913-3 —
B5102160-3 — 5499141-3
20 A5102159-4 5499913-4 5499786-4
B 5102160-4 — 5499141-4
24A— 5499913-5 5499786-5
B5102160-5 5499345-5 —
26 A 5102159-6 5499913-6 5499786-6
.110 B 5102160-6 — 5499141-6
2.79 30 A5102159-7 5499913-7 —
B—— 5499141-7
34 A 5102159-8 5499913-8 5499786-8
B 5102160-8 — 5499141-8
40A5102159-9 5499913-9 5499786-9
B 5102160-9 5499345-9 5499141-9
50 A 1-5102159-0 1-5499913-0 1-5499786-0
B1-5102160-0 1-5499345-0 1-5499141-0
60 A 1-5102159-1 1-5499913-1 1-5499786-1
B 1-5102160-1 — 1-5499141-1
64 A 1-5102159-2 — 1-5499786-2
B 1-5102160-2 — 1-5499141-2
10 A— — —
B 5102162-1 — 5102322-1
14 A 5102161-2 — 5499925-2
B 5102162-2 — 5102322-2
16 A— — —
B— — 5102322-3
20 A 5102161-4 5499914-4 —
B— — 5102322-4
24 A 5102161-5 — 5499925-5
B 5102162-5 — 5102322-5
26 A— — —
.155 B— — 5102322-6
3.94 30 A 5102161-7 ——
B 5102162-7 ——
34 A 5102161-8 5499914-8 —
B 5102162-8 — 5102322-8
40 A— — —
B— 5499376-9 —
50 A— — 1-5499925-0
B 1-5102162-0 ——
60 A— — —
B 1-5102162-1 ——
64 A— — —
B 1-5102162-2 ——
Plating Code A — Gold flash over palladium-nickel plate, .000015 [0.00038] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000015 [0.00038]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000030 [0.00076]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Right-Angle PCB Mount
.025 [0.64] Sq. Posts
(Mating End) (Continued)
91
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Military, Center and Dual Polarized, Right-Angle
Universal Ejection Style Pin Headers
Universal Ejection Style Pin Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Mounting Information
No mounting hardware
is supplied by TE.
Recommended Mounting Hole Pattern
For Right-Angle PCB Mount Headers
PC board thicknesses are : .062 [1.57] for .110 [2.79] long posts,
.125 [3.18] for .155 [3.94] long posts.
.106
[2.69] Dia.
.035
[0.89]
.230
[5.84]
.029
[0.74]
.100
[2.54]
.100
[2.54]
E
Dia. Typ.
F
Position No.1
92
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Military, Center and Dual Polarized
Universal Ejection Style Pinless Headers
Universal Ejection Style Pinless Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Material and Finish
Housing — Black PBT or nylon,
UL 94V-0 rated
Related Product Data
Mateable Receptacles —
pages 48-55
Accessories —
Snap-In Polarizer — page 63
Technical Documents
Product Specifications
108-40018 Pin Headers
Position No.1 Indicator
Vertical PCB Mount
.025 [0.64] Sq. Posts
(without latches)
Pinless Header
E
C
B
A
.100
[2.54]
.100
[2.54]
.315
[8.00]
.549
[13.9]
.050
[1.27]
.150
[3.81]
Dia.
2 Holes
.096
[2.44] Dia.
2Holes
•
No. of Dimensions Pinless Header Part Nos.
Pos. AB CE Press-Fit Clearance-Fit
1.260 .860 1.100 .400
10 32.00 21.84 27.94 10.16 499726-1 102142-6
1.460 1.060 1.300 .600
14 37.08 26.92 33.02 15.24 — 102142-8
1.560 1.160 1.400 .700
16 39.62 29.46 35.56 17.78 — 102142-9
1.760 1.360 1.600 .900
20 44.70 34.54 40.64 22.86 — 102142-1
1.960 1.560 1.800 1.100
24 49.78 39.62 45.72 27.94 — 1-102142-0
2.060 1.660 1.900 1.200
26 52.32 42.16 48.26 30.48 — 102142-2
2.460 2.060 2.300 1.600
34 62.48 52.32 58.42 40.64 499726-8 102142-3
2.760 2.360 2.600 1.900
40 70.10 59.94 66.04 48.26 499726-9 102142-4
3.260 2.860 3.100 2.400
50 82.80 72.64 78.74 60.96 1-499726-0 102142-5
3.760 3.360 3.600 2.900
60 95.50 85.34 91.44 73.66 1-499726-1 102142-7
3.960 3.560 3.800 3.100
64 100.58 90.42 96.52 78.74 1-499726-2 1-102142-3
Notes: 1. 10- and 14-position pinless headers have only one slot for snap-in polarizer (military polarization).
2. 10-position pinless headers have only one slot for dual polarization.
3. For information regarding latch/pin header applications and for ordering latches separately,
refer to page 96.
All part numbers are RoHS compliant.
Pin 2
Pin 1
93
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Military, Center and Dual Polarized
Universal Ejection Style Pinless Headers
Universal Ejection Style Pinless Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Installation of Press-Fit
Pinless Headers
Insertion Instructions:
1. Place pinless header
over preinstalled posts
so that post tips start into
header cavities.
2. With bottom of pc board
supported, place steel
block over header. Steel
block must be wider and
longer than header so
that it covers all four sides
of the header. However,
for headers with latches
pre-assembled, the steel
block must not interfere
with the latches.
3. Apply an even, centered
force on steel block until
header bottoms on pc
board. If posts are longer
than .545 [13.84], they
may be forced against
the steel block before the
header is fully seated. In
this situation, extreme
caution must be taken so
that posts are not dam-
aged or pushed out of
the pc board.
Insertion Force: 60 lb. [267 N] max.
Retention Force: 20 lb. [89 N] min.
TE recommends the use of a typical manual frame assembly for insertion of
pinless headers.The frame assembly and steel block are not supplied by TE.
Steel Block
(Centered over
Header)
.529
[13.44]
.025
[0.64]
Preinstalled in
PC Board
Sq. Posts
FORCE
PC Board
FORCE
Pinless Header
94
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.100 x .100 [2.54 x 2.54], .025 [0.64] Sq. Posts (Mating End)
Universal Ejection Style Pin Headers with PCT Housing
Universal Ejection Style Pin Headers with PCT Housing, .100 x .100
[2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End)
Vertical PCB Mount
Right-Angle PCB Mount
Material and Finish
Housing — Red PCT, UL 94V-0 rated
Contacts — Brass; Gold flash over pal-
ladium-nickel plate, .000030 [0.00076]
min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the
soldertails, over .000050 [0.00127] min.
nickel underplate or .000030 [0.00076]
min. gold on the mating surfaces,
.000100 [0.00254] min. tin plate on
the soldertails, over .000050 [0.00127]
min. nickel underplate
Related Product Data
Mateable Receptacles —
pages 48-55
Accessories —
Snap-In Polarizer — page 63
Technical Documents
Product Specifications
108-40018 Pin Headers
Vertical
Right-Angle
.549
[13.94]
.200
[5.08]
.195
[4.95]
.050
[1.27]
.100
[2.54] .100
[2.54] .165
[4.19]
.315
[8.00]
.340
[8.64]
.289
[7.34]
.240
[6.10]
.110
[2.79]
.100
[2.54]
.100
[2.54]
.151
[3.84]
.129
[3.28]
.350
[8.89]
.150
[3.81]
.150
[3.81]
.096
[2.44]
.040
[1.02]
A
B
D
E
.025
[0.64]
.110
[2.79]
C
.549
[13.94]
.200
[5.08]
.040
[1.02]
.110
[2.79]
.195
[4.95]
.025
[0.64]
.050
[1.27]
.150
[3.81]
A
B
D
.100
[2.54] .100
[2.54]
.100
[2.54]
.100
[2.54]
.165
[4.19] .129
[3.28]
.289
[7.34]
.250
[6.35]
.250
[6.35]
.240
[6.10]
.110
[2.79]
.315
[8.00]
.340
[8.64]
.350
[8.89]
.150
[3.81]
E
Ø .025
[0.64]
Ø .025
[0.64]
C
Dia.
2 Plc.
•
Position No.1
Indicator
•
Position No.1
Indicator
Pin 1
Pin 2
Pin 1
Pin 2
95
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
.100 x .100 [2.54 x 2.54], .025 [0.64] Sq. Posts (Mating End)
Universal Ejection Style Pin Headers with PCT Housing
Universal Ejection Style Pin Headers with PCT Housing, .100 x .100
[2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) (Continued)
Part Numbers
No. of Dimensions Vertical Right-Angle
Pos. ABCDE
Pin Header Pin Header
(without (without
Latches) Latches)
1.260 1.100 .860 .700 .400
1032.00 27.94 21.84 17.78 10.16 5111008-1 —
1.460 1.300 1.060 .900 .600
1437.08 33.02 26.92 22.86 15.24 —5111105-2
1.560 1.400 1.160 1.000 .700
16 39.62 35.56 29.46 25.40 17.78 — 5111105-3
1.760 1.600 1.360 1.200 .900
20 44.70 40.64 34.54 30.48 22.86 — 5111105-4
1.960 1.800 1.560 1.400 1.100
2449.78 40.64 39.62 35.56 27.94 5111008-5 5111105-5
2.060 1.900 1.660 1.500 1.200
2652.32 48.26 42.16 38.10 30.48 —5111105-6
2.260 2.100 1.860 1.700 1.400
30 57.40 53.34 47.24 43.18 35.56 5111008-7 5111105-7
2.460 2.300 2.060 1.900 1.600
34 62.48 58.42 52.32 48.26 40.64 5111008-8 5111105-8
2.760 2.600 2.360 2.200 1.900
4070.10 66.04 59.94 55.88 48.26 5111008-9 5111105-9
3.260 3.100 2.860 2.700 2.400
50 82.80 78.74 72.64 68.58 60.98 1-5111008-0 1-5111105-0
3.760 3.600 3.360 3.200 2.900
60 95.50 91.44 85.34 81.28 73.66 1-5111008-1 1-5111105-1
3.960 3.800 3.560 3.400 3.100
64 100.58 96.52 90.42 86.36 78.74 1-5111008-2 1-5111105-2
*Max. distance from edge of PC board for daisy chain applications
Recommended Pc Board Mounting Pattern for Right-Angle Header
.106 Dia.
[2.69] Dia.
Typ.
.106 Dia.
[2.69] Dia.
Typ.
.100
[2.54]
C
Lof Holes
.060
[1.52]
C
Lof Holes
.029
[.736]
C
Lof Holes
.100
[2.54]
Typ.
.110
[2.79]
of Stencil Pattern
.035
[0.89]
After Plating
.035
[0.89]
After Plating
.100
[2.54]
C
Lof Holes
.070 Typ.
[1.78]
.090
[2.29]
B
C
.475 Max.*
[12.07] .110
[2.79]
of Stencil Pattern
Board Edge
Position No. 1
Position No. 1
Recommended PC Board Mounting Pattern for Vertical Header
.070 Typ.
[1.78]
.090
[2.29]
.100
[2.54]
Typ.
96
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Latches for Ejection Style Pin Headers and Pinless Headers
Latches for Ejection Style Universal Pin Headers and Pinless Headers
Material
Black thermoplastic, UL 94V-0 Rated
Long Latch Part No. 102320-1
(See Figure 1)
Short Latch Part No. 102312-1
(See Figure 2)
Latch/Pin Header Applications
Figure 2 — Use Short Latch for
AMP-LATCH Novo Receptacles without Strain Relief &
Female Socket Connectors without Strain Relief
Special Long Latch Part No. 1825851-1 for
AMPMODU Mod IV Housing with Center Polarization Key
Figure 1 — Use Long Latch for
AMP-LATCH Novo Receptacles with Strain Relief &
Female Socket Connectors with Strain Relief
.895
[22.73]
.175
[4.45]
1.092
[27.72]
.265
[6.73]
1.075
[27.31]
Long Latch Part No. 111338-1
(See Figure 1)
Short Latch Part No. 111293-1
(See Figure 2)
Latches
for use with Novo
Receptacles and Female
Socket Connectors, 609,
622 & 636 Series
Material
Red PCT, UL 94V-0 Rated
Material
Black thermoplastic, UL 94V-0 Rated
.561
[14.25]
.691
[17.55]
.475
[12.07]
.185
[4.70] Ref.
Ref.
.140 ±.008
[3.56 ±0.20]
.576
[14.63]
.416
[10.57]
.576
[14.63]
.416
[10.57]
97
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Cable Solutions
Cable Solutions
.100 [2.54] Centerline,
IDC Ribbon Cable,
PVC Insulation
Product Specifications
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
No. of Dimensions Part
Conductors ABC
Number
24 AWG 7/32 Tinned Copper
2 .100 [2.54] .200 [5.08] .044 [1.12] 57746-2
5 .400 [10.16] .500 [12.70] .044 [1.12] 57746-5
10 .900 [22.86] 1.000 [25.40] .044 [1.12] 1-57746-0
15 1.400 [35.56] 1.500 [38.10] .044 [1.12] 1-57746-5
20 1.900 [48.26] 2.000 [50.80] .044 [1.12] 2-57746-0
25 2.400 [60.96] 2.500 [63.50] .044 [1.12] 2-57746-5
28 2.700 [68.58] 2.800 [71.12] .044 [1.12] 2-57746-8
26 AWG 7/34 Tinned Copper
2 .100 [2.54] .200 [5.08] .039 [0.99] 57744-2
5 .400 [10.16] .500 [12.70] .039 [0.99] 57744-5
10 .900 [22.86] 1.000 [25.40] .039 [0.99] 1-57744-0
15 1.400 [35.56] 1.500 [38.10] .039 [0.99] 1-57744-5
20 1.900 [48.26] 2.000 [50.80] .039 [0.99] 2-57744-0
25 2.400 [60.96] 2.500 [63.50] .039 [0.99] 2-57744-5
28 2.700 [68.58] 2.800 [71.12] .039 [0.99] 2-57744-8
26 AWG 7/34 Overcoated Tinned Copper
2 .100 [2.54] .200 [5.08] .039 [0.99] 57745-2
5 .400 [10.16] .500 [12.70] .039 [0.99] 57745-5
10 .900 [22.86] 1.000 [25.40] .039 [0.99] 1-57745-0
15 1.400 [35.56] 1.500 [38.10] .039 [0.99] 1-57745-5
20 1.900 [48.26] 2.000 [50.80] .039 [0.99] 2-57745-0
25 2.400 [60.96] 2.500 [63.50] .039 [0.99] 2-57745-5
28 2.700 [68.58] 2.800 [71.12] .039 [0.99] 2-57745-8
Other Conductor Counts Available on Request.
Contact MADISON CABLE (1-877-MADISON), a Division of TE, for engineer-
ing questions or for order placement of this cable.
No. of Dimensions Part
Conductors ABC
Number
24 AWG 7/32 Overcoated Tinned Copper
2 .100 [2.54] .200 [5.08] .044 [1.12] 57747-2
5 .400 [10.16] .500 [12.70] .044 [1.12] 57747-5
10 .900 [22.86] 1.000 [25.40] .044 [1.12] 1-57747-0
15 1.400 [35.56] 1.500 [38.10] .044 [1.12] 1-57747-5
20 1.900 [48.26] 2.000 [50.80] .044 [1.12] 2-57747-0
25 2.400 [60.96] 2.500 [63.50] .044 [1.12] 2-57747-5
28 2.700 [68.58] 2.800 [71.12] .044 [1.12] 2-57747-8
22 AWG 7/30 Tinned Copper
2 .100 [2.54] .200 [5.08] .051 [1.30] 57748-2
5 .400 [10.16] .500 [12.70] .051 [1.30] 57748-5
10 .900 [22.86] 1.000 [25.40] .051 [1.30] 1-57748-0
15 1.400 [35.56] 1.500 [38.10] .051 [1.30] 1-57748-5
20 1.900 [48.26] 2.000 [50.80] .051 [1.30] 2-57748-0
25 2.400 [60.96] 2.500 [63.50] .051 [1.30] 2-57748-5
28 2.700 [68.58] 2.800 [71.12] .051 [1.30] 2-57748-8
Edge Mark
Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation Thickness
Temperature Rating — –20°C to +105°C
Flammability — UL: VW1
Typ.
B
C
A
.050
[1.27]
.100
[2.54]
Ty p .
.010
[0.25]
98
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Cable Solutions (Continued)
Cable Solutions
.156 [3.96] Centerline,
Flat Ribbon Cable,
PVC Insulation
Product Specifications
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
No. of Dimensions Part
Conductors ABC
Number
22 AWG 7/30 Tinned Copper
2 .156 [3.96] .312 [7.92] .051 [1.30] 57750-2
5 .624 [15.85] .780 [19.81] .051 [1.30] 57750-5
10 1.404 [35.66] 1.560 [39.62] .051 [1.30] 1-57750-0
15 2.184 [55.47] 2.340 [59.44] .051 [1.30] 1-57750-5
20 2.964 [75.29] 3.120 [79.25] .051 [1.30] 2-57750-0
24 3.588 [91.14] 3.744 [95.10] .051 [1.30] 2-57750-4
18 AWG 7/26 Tinned Copper
2 .156 [3.96] .312 [7.92] .068 [1.73] 57752-2
5 .624 [15.85] .780 [19.81] .068 [1.73] 57752-5
10 1.404 [35.66] 1.560 [39.62] .068 [1.73] 1-57752-0
15 2.184 [55.47] 2.340 [59.44] .068 [1.73] 1-57752-5
20 2.964 [75.29] 3.120 [79.25] .068 [1.73] 2-57752-0
24 3.588 [91.14] 3.744 [95.10] .068 [1.73] 2-57752-4
Other Conductor Counts Available on Request.
Contact MADISON CABLE (1-877-MADISON), a Division of TE, for engineer-
ing questions or for order placement of this cable.
Edge Mark
Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation Thickness
Temperature Rating — –20°C to +105°C
Flammability — UL: VW1
Typ.
B
C
A
.078
[1.98]
.156
[3.96]
T
yp.
.010
[0.25]
Part No. Page Part No. Page Part No. Page
99
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Part Number Index
Ribbon Cable Interconnect Solutions
19156 86
57034 47
57040 47
57744 97
57745 97
57746 97
57747 97
57748 97
57750 98
57752 98
100411 41
102142 92
102198 86
102312 96
102320 96
104068 9, 10
104069 9, 11
104069 11
104072 65
104652 20
104655 21
104656 21
104693 21
104891 27
104892 26
104893 26
104894 24
104895 24
111196 9
111293 96
111338 96
111382 58
111446 45
111451 63
111492 45
111494 46
111504 45
111506 46
111547 67
111614 68
111620 64
111623 17
111626 17
120623 63
147121 21
147381 21
147382 21
147383 21
147384 20
147413 20
147503 21
174638 62
174903 62
175629 62
175637 62
188275 36
188431 41
215079 32, 33, 34
215083 38
215083 32, 33, 38
215460 35
215460 32, 33, 35
215464 32, 33, 37
215570 32, 33, 39
338068 41
338069 41
338070 41
338095 32, 33, 40
338096 32, 33, 40
338097 32, 33, 40
338728 41
499252 14, 49, 50, 51, 68
499712 65
499726 92
499991 63
746383 86
746603 47
746610 58
746611 59
1377074 44
1437006 56
1437011 69
1437020 67
1437021 67
1437022 67
1437023 64, 69
1437024 69
1437025 69
1437026 69
1437027 69
1437028 69
1437029 69
1499252 68
1658525 57
1658526 55
1658527 53
1658528 53
1658618 14
1658619 14
1658620 49
1658621 50
1658622 50
1658623 49
1658624 51
1658694 88
1658695 88
1734161 15
1734162 15
1761606 80
1761607 81
1761608 80
1761609 81
1761685 82
1761686 82
1761687 82
1761688 82
1761690 83
1761692 83
1761693 82
1761694 82
1825851 96
1888188 15
5088450 66
5102153 85
5102154 85
5102155 85
5102156 85
5102159 90
5102160 90
5102161 90
5102162 90
5102321 85
5102322 90
5103308 76
5103309 76
5103310 77
5103311 77
5104338 78
5104340 79
5111008 95
5111105 95
5111448 46
5111595 12
5111824 15
5499141 90
5499160 85
5499206 85
5499345 90
5499374 85
5499376 90
5499786 90
5499910 85
5499911 85
5499913 90
5499914 90
5499922 85
5499923 85
5499925 90
5746612 59
5746613 59
5746615 60
6437006 61
6489700 15
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Ribbon Cable
Interconnect Solutions
TE Connectivity Catalog 82012 Revised 4-12
te.com
© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
82012 LUG PDF 04/2012
TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or
company names might be trademarks of their respective owners.
Ribbon Cable Interconnect Solutions
