30W Single Output Industrial DIN Rail Power Supply DR-30 series .. SPECIFICATION MODEL OUTPUT DR-30-12 DR-30-15 DR-30-24 5V 12V 15V 24V RATED CURRENT 3A 2A 2A 1.5A CURRENT RANGE 0 ~ 3A 0 ~ 2A 0 ~ 2A 0 ~ 1.5A RATED POWER 15W 24W 30W 36W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p 150mVp-p VOLTAGE ADJ. RANGE 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 100ms, 30ms/230VAC HOLD UP TIME (Typ.) 100ms/230VAC VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz OVERLOAD 105 ~ 160% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 82% -20 ~ +60 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55011, EN55032 (CISPR32) Class B, EN61000-3-2,-3 DIMENSION 83% Protection type : Shut down o/p voltage, re-power on to recover ISOLATION RESISTANCE EMC EMISSION PACKING NOTE 81% TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE EMC IMMUNITY MTBF OTHERS ND 74% 0.88A/115VAC 0.48A/230VAC COLD START 15A/115VAC 30A/230VAC WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY (Note 4) 21ms/115VAC at full load 120 ~ 370VDC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVER VOLTAGE EMC 100ms, 30ms/115VAC at full load EFFICIENCY (Typ.) PROTECTION SAFETY & 4.75 ~ 5.5V NR INPUT DR-30-5 DC VOLTAGE 0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 UL60950-1, TUV EN60950-1 approved, Design refer to EN50178 Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A 441.5K hrs min. MIL-HDBK-217F (25) 78*93*56mm (W*H*D) 0.27Kg; 48pcs/14Kg/1.02CUFT File Name:DR-30-SPEC 2017-07-07 DR-30 30W Single Output Industrial DIN Rail Power Supply Mechanical Specification series Case No. 918B Unit:mm 68 45 47 56 27.4 Terminal Pin No. Assignment Pin No. 5,6 7 8 Assignment AC/N AC/L +V Assignment -V LED +V ADJ. 3 Pin No. 1 2 3,4 46.5 46.5 93 12.2 5 5 5 8 6 5 4 3 7 5 RECTIFIERS & FILTER EMI FILTER 2 1 ND Block Diagram I/P 37.75 78 35 NR ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15 POWER SWITCHING RECTIFIERS & FILTER +V -V DETECTION CIRCUIT O.L.P. CONTROL O.V.P. Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE () 60 70 (VERTICAL) 60 50 40 85 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:DR-30-SPEC 2017-07-07