Product Data Sheet
A Regal Brand
www.marathonsp.com 1
142X122
Replace “x” with 1, 2, or 3 for number of poles
Power Terminal Block
200 Amps 600 Volts AC/DC
Wire Range
• Line: (1) 1/4 - 20 X 5/8” stud
• Load: (1) 1/4 - 20 X 5/8” stud
Electrical Ratings
• 200 Amps
• 600V per UL 1059 & CSA 22.2 No.158, class B & C requirements
• SCCR of 10,000 A (default for terminal blocks).
• Factory & Field Wiring
Agency Compliance
• UR - UL Recognized Terminal Block, Evaluated to UL 1059, File No.XCFR2.E62806
• CSA - certifed to C22.2 No. 158, File No. LR19766
• CE compliant to IEC 60947-7-1
Material Information
• Insulator base:
• Phenolic
• Flammability rating of insulator base UL94V0
• Insulator base temperature rating: -40°C to 150°C (UL RTI)
• Connector: copper, tin plated
• Stud: brass, tin plated
• Connector mounting screws: steel, zinc plated
• RoHS compliant
www.marathonsp.com 2
Termination Specications
PDS 0236 REV-D 10/10/13
Load Side Termination
Type Torque Stud Length Maximum
Lug/Bar Width
Listed lugs
on 1/4 - 20 studs
6.9 N·m
(61 lbf·in)
0.56”
(14.mm)
0.63”
(16mm)
• For use with conductors prepared with listed connectors such as single hole compression/crimp lugs or
listed ring, fork or spade terminals.
• Conductor size, ampacity, temperature rating, and type are dictated by the ratings of the listed lugs utilized
and applicable code requirements.
• Hex nut 7/16 across ats.
Load Side Termination
Type Torque Stud Length Maximum
Lug/Bar Width
Listed lugs
on 1/4 - 20 studs
6.9 N·m
(61 lbf·in)
0.56”
(14.mm)
0.63”
(16mm)
• For use with conductors prepared with listed connectors such as single hole compression/crimp lugs or
listed ring, fork or spade terminals.
• Conductor size, ampacity, temperature rating, and type are dictated by the ratings of the listed lugs utilized
and applicable code requirements.
• Hex nut 7/16 across ats.
www.marathonsp.com 3
Installation & Accessories
• Mounting(Panel):
• For use with #10 fastener.
• Torque mounting fastener to 25-30 lbf·in (2.8 - 3.4 N·m).
• Covers:
• Flat covers available upon request
• Catalog Number: CC142x (replace “x” with number of poles)
• Covers are clear polycarbonate
• Accessory covers are not intended to provide insulation for electrical spacings.
• Marker Strip: white vinyl strip with mounting screws available.
• Printing options available, consult customer service for specications.
Drawing
PDS 0236 REV-D 10/10/13