609176001016199 - AVX Connectors

CONNECT

INTER

Standard IDC 18-24 AWG: WTB

00-9176

The 917X series of surface mount Insulation Displacement Connectors (IDC)

were developed to meet the harsh automotive and industrial market

applications for connecting individual wires directly to a PCB ranging from 14

AWG to 28 AWG. This industry proven contact system has been tested to

automotive levels of shock, vibration, and temperature cycling to prove their

reliability and robustness. The simplicity of inserting a wire into the connector

with a small tool allows a wide range of devices to be connected to the PCB

without soldering. In SSL applications specifically, these connectors are used to

bring power and signal onto the PCB or are used to daisy chain multiple boards

together in a long string. While the IDC contact provides a gas-tight connection

to conductor of the wire, the housing has been designed to grab the insulation

of the wire to provide a positive strain relief even in the harshest conditions. In

case of repair, the wires can be removed and replace up to three times.

The 9176 series accepts 18 AWG to 24 AWG wires with an insulation diameter

ranging from 1.1mm to 2.1mm. These dual contact connectors support a 10

amp current rating with two large SMT solder tails per wire to provide maximum

stability on the PCB. Available in 1p-3p configuration, these connectors can be

end stackable for higher pin counts. The 9176 series also comes with optional

locking strain relief caps that act as the termination tool for severe vibration

applications.

ELECTRICAL

• Current Rating: 10 Amp / Contact

• Voltage Rating: 300 VAC

9176

Series

Prefix

00X

Number of Ways

Plating

Option

06 = Pure Tin

all over

HOW TO ORDER

0XX

Wire Gauge Size

ENVIRONMENTAL

• Operating Temperature:

-40ºC to +125ºC

MECHANICAL

• Insulator Material: Nylon 46: UL94V0

• Contact Material: Phosphor Bronze

• Plating: Tin over Nickel

• Durability: 3 Cycles

FEATURES AND BENEFITS

• IDC contact provides a gas-tight connection to the PCB for long term reliability

•

Connector housing captures the wire insulation for positive strain relief

•

Tested to automotive levels on shock, vibration and temperature cycling for

reliability

•

Low and high volume assembly tools to match production volumes

•

Reduced total applied cost versus solder or crimp processes

•

Optional thru and end caps lock in place to provide maximum strain relief

•

High temperature insulator capable to 260ºC reflow soldering processes

APPLICATIONS

• Connecting discrete wire components

directly to the PCB

• Bringing power and signals onto a PCB

• Daisy chaining PCB’s together to create

a continuous string of boards

• Application Notes: refer to 201-01-124

Code No of Details

Ways

001 1 Page 3

002 2 Page 4

003 3 Page 5

Code Accepted Wire Cap Code

Wire Gauge Insulation Pages 6-7

001 18 Gauge Ø 1.6-2.1 021

Stranded

011 20 Gauge Ø 1.6-2.1 021

Solid or Stranded

022 22 Gauge Ø 1.1-1.6 016

Solid or Stranded

032 24 Gauge Ø 1.1-1.6 016

Solid or Stranded

Certification: UL File #E90723

Insulator Color

9 = UL White

8 = UL Black

Special Order

Standard IDC 18-24 AWG: WTB

00-9176

CONNECTOR/TOOLING PART NUMBER MATRIX

SERIES 9176 IDC HAND INSERTION TOOLING* ACCESSORY CAPS

AWG Wire Positions Color Part Number Plastic Metal Mass Through Wire Wire Stop

Insulation (medium volume) (high volume) Termination

18 Ø 1.6 - 2.1 1p Black 009176001001806 069176701601000 069176701701000 N/A 609176001021000 609176001021099

18 Ø 1.6 - 2.1 1p White 009176001001906 069176701601000 069176701701000 N/A 609176001021100 609176001021199

18 Ø 1.6 - 2.1 2p Black 009176002001806 069176701601000 069176701701000 069176701701002 609176002021000 609176002021099

18 Ø 1.6 - 2.1 2p White 009176002001906 069176701601000 069176701701000 069176701701002 609176002021100 609176002021199

18 Ø 1.6 - 2.1 3p Black 009176003001806 069176701601000 069176701701000 069176701701003 609176003021000 609176003021099

18 Ø 1.6 - 2.1 3p White 009176003001906 069176701601000 069176701701000 069176701701003 609176003021100 609176003021199

20 Ø 1.6 - 2.1 1p Black 009176001011806 069176701601000 069176701701000 N/A 609176001021000 609176001021099

20 Ø 1.6 - 2.1 1p White 009176001011906 069176701601000 069176701701000 N/A 609176001021100 609176001021199

20 Ø 1.6 - 2.1 2p Black 009176002011806 069176701601000 069176701701000 069176701701002 609176002021000 609176002021099

20 Ø 1.6 - 2.1 2p White 009176002011906 069176701601000 069176701701000 069176701701002 609176002021100 609176002021199

20 Ø 1.6 - 2.1 3p Black 009176003011806 069176701601000 069176701701000 069176701701003 609176003021000 609176003021099

20 Ø 1.6 - 2.1 3p White 009176003011906 069176701601000 069176701701000 069176701701003 609176003021100 609176003021199

22 Ø 1.1 - 1.6 1p Black 009176001022806 069176701602000 069176701702000 N/A 609176001016000 609176001016099

22 Ø 1.1 - 1.6 1p White 009176001022906 069176701602000 069176701702000 N/A 609176001016100 609176001016199

22 Ø 1.1 - 1.6 2p Black 009176002022806 069176701602000 069176701702000 069176701702002 609176002016000 609176002016099

22 Ø 1.1 - 1.6 2p White 009176002022906 069176701602000 069176701702000 069176701702002 609176002016100 609176002016199

22 Ø 1.1 - 1.6 3p Black 009176003022806 069176701602000 069176701702000 069176701702003 609176003016000 609176003016099

22 Ø 1.1 - 1.6 3p White 009176003022906 069176701602000 069176701702000 069176701702003 609176003016100 609176003016199

24 Ø 1.1 - 1.6 1p White 009176001032106 069176701602000 069176701702000 N/A 609176001016100 609176001016199

24 Ø 1.1 - 1.6 1p Black 009176001032806 069176701602000 069176701702000 N/A 609176001016000 609176001016099

24 Ø 1.1 - 1.6 1p White 009176001032906 069176701602000 069176701702000 N/A 609176001016100 609176001016199

24 Ø 1.1 - 1.6 2p Black 009176002032806 069176701602000 069176701702000 069176701702002 609176002016000 609176002016099

24 Ø 1.1 - 1.6 2p White 009176002032906 069176701602000 069176701702000 069176701702002 609176002016100 609176002016199

24 Ø 1.1 - 1.6 3p Black 009176003032806 069176701602000 069176701702000 069176701702003 609176003016000 609176003016099

24 Ø 1.1 - 1.6 3p White 009176003032906 069176701602000 069176701702000 069176701702003 609176003016100 609176003016199

* Hand Insertion Tooling - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124

CONNECT

INTER

Standard IDC 18-24 AWG: WTB

00-9176

18-24 AWG 1 WAY IDC CONNECTOR

PACKING DETAILS

REEL QTY 1000

LEADER 480MM

TRAILER 120MM

SMT PCB LAYOUT

PURE TIN PADS

Code Accepted A Wire B

Wire Gauge Insulation

001 18AWG Stranded 0.72 Ø 1.6-2.1 2.1

011 20AWG Solid and Stranded 0.60 Ø 1.6-2.1 2.1

022 22AWG Solid and Stranded 0.47 Ø 1.1-1.6 1.6

032 24AWG Solid and Stranded 0.37 Ø 1.1-1.6 1.6

CONNECT

INTER

NOTES:

1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.

2. CONTACT MATERIAL: PHOSPHOR BRONZE.

INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.

COLOR REFER TO PAGE 1.

3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID

AND STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES,

SEE TABLE.

4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.

5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO

ELCO SPEC 201-01-106

6. APPLICATION NOTES 201-01-124.

7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 6.

8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 8.

9. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).

10. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED.

Standard IDC 18-24 AWG: WTB

00-9176

18-24 AWG 2 WAY IDC CONNECTOR

PACKING DETAILS

REEL QTY 1000

LEADER 480MM

TRAILER 120MM

SMT PCB LAYOUT

PURE TIN PADS

CONNECT

INTER

Code Accepted A Wire B

Wire Gauge Insulation

001 18AWG Stranded 0.72 Ø 1.6-2.1 2.1

011 20AWG Solid and Stranded 0.60 Ø 1.6-2.1 2.1

022 22AWG Solid and Stranded 0.47 Ø 1.1-1.6 1.6

032 24AWG Solid and Stranded 0.37 Ø 1.1-1.6 1.6

NOTES:

1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.

2. CONTACT MATERIAL: PHOSPHOR BRONZE.

INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.

COLOR REFER TO PAGE 1.

3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID AND

STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES, SEE TABLE.

4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.

5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS

REFER TO ELCO SPEC 201-01-106. UL COMPONENTS REFER TO

ELCO SPECIFICATION 201-01-106UL.

6. APPLICATION NOTES 201-01-124.

7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 6.

8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 8.

9. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 9

10. FOR ACCESSORY CAPS REFER TO PAGE 6 AND 7.

10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).

11. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED.

Standard IDC 18-24 AWG: WTB

00-9176

18-24 AWG 3 WAY IDC CONNECTOR

PACKING DETAILS

REEL QTY 1000

LEADER 480MM

TRAILER 120MM

SMT PCB LAYOUT

PURE TIN PADS

CONNECT

INTER

Code Accepted A Wire B

Wire Gauge Insulation

001 18AWG Stranded 0.72 Ø 1.6-2.1 2.1

011 20AWG Solid and Stranded 0.60 Ø 1.6-2.1 2.1

022 22AWG Solid and Stranded 0.47 Ø 1.1-1.6 1.6

032 24AWG Solid and Stranded 0.37 Ø 1.1-1.6 1.6

NOTES:

1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.

2. CONTACT MATERIAL: PHOSPHOR BRONZE.

INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.

COLOR REFER TO PAGE 1.

3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID AND

STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES, SEE TABLE.

4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.

5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS

REFER TO ELCO SPEC 201-01-106. UL COMPONENTS REFER TO

ELCO SPECIFICATION 201-01-106UL.

6. APPLICATION NOTES 201-01-124.

7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 8.

8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 8.

9. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 9

10. FOR ACCESSORY CAPS REFER TO PAGE 6 AND 7.

10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).

11. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED.

Code Slot A Diameter B Text

016 1.00 1.60 Ø1.6

021 1.50 2.10 Ø2.1

Color X00

Black 000

White 100

NOTES:

1. CAP FOR IDC WIRE TO BOARD CONNECTION, 1, 2 AND 3

WAY, THROUGH WIRE.

2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE

PAGE 2 FOR THE CORRECT PART CODE TO MATCH WIRE.

3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS

SEE TABLE BELOW.

4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW.

5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION

DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM.

6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.

7. PACKED IN BAGS, 1000 PIECES PER BAG.

8. ONE WAY CAP ASSEMBLY AID, REFER TO PAGE 10.

9. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED.

Standard IDC 18-24 AWG: WTB

00-9176

60-9176-00X-0XX-X00

ACCESSORY CAP – THROUGH WIRE

CONNECT

INTER

ASSEMBLED

CONNECTOR

Standard IDC 18-24 AWG: WTB

00-9176

60-9176-00X-0XX-X99

ACCESSORY CAP – WIRE STOP

Code Slot A Diameter B Text

016 1.00 1.60 Ø1.6

021 1.50 2.10 Ø2.1

Color X00

Black 000

White 100

NOTES:

1. CAP FOR IDC WIRE TO BOARD CONNECTION, 1, 2 AND 3

WAY, WIRE STOP.

2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE

PAGE 2 FOR THE CORRECT PART CODE TO MATCH WIRE.

3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS

SEE TABLE BELOW.

4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW.

5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION

DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM.

6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.

7. PACKED IN BAGS, 1000 PIECES PER BAG.

8. ONE WAY CAP ASSEMBLY AID, REFER TO PAGE 10.

9. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED.

CONNECT

INTER

ASSEMBLED

CONNECTOR

Standard IDC 18-24 AWG: WTB

00-9176

HAND INSERTION TOOLING

FOR SINGLE 18/24 GAUGE WIRE

CLEARANCE AREA ON PCB FOR HAND TOOLING

HIGH PRODUCTION

Metal

Max Tool

Insulation Part Number

Dia

2.10 06 9176 7017 01 000

1.60 06 9176 7017 02 000

Max Tool

Insulation Part Number

Dia

2.10 06 9176 7016 01 000

1.60 06 9176 7016 02 000

MEDIUM PRODUCTION

Metal/Plastic

UNIVERSAL HANDLE

Details Tool

Part Number

6.35 A/F HEX 06 7000 7730 01 000

BIT HOLDER

1 WAY 2 WAY 3 WAY

CONNECT

INTER

Standard IDC 18-24 AWG: WTB

00-9176

INSERTION TOOLING

REQUIRES HAND PRESS WITH FLAT ROCK PLATES

HIGH PRODUCTION

Metal

No. Max Tool

of Ways Insulation Part Number

Dia

2.10 06 9176 7017 01 002

1.60 06 9176 7017 02 002

2.10 06 9176 7017 01 003

1.60 06 9176 7017 02 003

2 WAY

3 WAY

NOTES:

1. DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.

2. MAXIMUM COMPONENT HEIGHT 1.00MM IN THIS AREA.

3. MAXIMUM COMPONENT HEIGHT 6.00MM IN THIS AREA.

4. THE SAME RESTRICTIONS APPLY TO ALL WIRE INSULATION DIAMETERS.

5. 2 AND 3 WAY TOOLS ONLY, FOR USE UNDER HAND PRESS WITH FLAT PLATES.

6. FOR HAND TOOLING REFER TO PAGE 8.

7. ALL DIMENSIONS ±0.20 UNLESS TOLERANCE SPECIFIED.

PCB RESTRICTED AREAS FOR PRESS ASSEMBLY TOOLING

CONNECT

INTER

CONNECT

INTER

Standard IDC 18-24 AWG: WTB

00-9176

HAND INSERTION TOOLING

FOR ONE WAY CAP INSERTION

CLEARANCE AREA ON PCB FOR HAND TOOLING

CONNECT

INTER

Standard IDC 18-24 AWG: WTB

00-9176

ASSEMBLED CONNECTOR

STANDARD CONNECTOR

CONNECTOR WITH CAP

NOTES:

1. ASSEMBLED HEIGHTS INCLUDE 0.10MM ALLOWANCE FOR PAD AND SOLDER THICKNESS.

NO ALLOWANCE HAS BEEN MADE FOR ANY SOLDER RESIST OR OTHER FEATURES.

2. WHEN THE WIRE IS ASSEMBLED THE INSULTATION SHOULD BE TRAPPED BY THESE EDGES.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

AVX:

609176002016000 609176002016099 609176002021000 609176002021099 609176003016000

609176003016099 609176003021000 609176003021099 609176001016199 609176001021100 609176002021100

609176001016000 609176001021199 609176001016100 609176003016100 609176002021199

609176002016199 609176002016100 609176003021199