MCO 600 ITRMS = 928 A ITAV = 600 A VRRM = 2000-2200 V High Power Single Thyristor Module Preliminary data VRRM VDRM V V 2100 2300 2000 2200 3 Type 5 4 3 2 2 Test Conditions ITRMS ITAV TVJ = TVJM TC = 85C; 180 sine ITSM TVJ = 45C VR = 0 Maximum Ratings 928 600 A A t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 15000 16000 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 13000 14400 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 1125000 1062000 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 845000 813000 A2s A2s 100 A/ms Features TVJ = TVJM repetitive, IT = 960 A f = 50 Hz, tP = 200 ms VD = 2/3 VDRM 1 A, non repetitive, IT = ITAVM IG = 1 A/ms diG/dt = A/ms 1000 V/ms PGAV VRGM 120 60 30 10 W W W V TVJ TVJM Tstg -40...140 140 -40...125 C C C 3000 3600 V~ V~ (dv/dt)cr TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM tP = 30 ms tP = 500 ms VISOL 50/60 Hz, RMS IISOL 1 mA Md Mounting torque (M6) Terminal connection torque (M8) Typical including screws Weight 500 t = 1 min t=1s Direct copper bonded Al2O3 -ceramic with copper base plate Planar passivated chips Isolation voltage 3600 V~ UL applied Keyed gate/cathode twin pins Applications (di/dt)cr 4 MCO 600-20io1 MCO 600-22io1 Symbol I2t 5 Motor control, softstarter Power converter Heat and temperature control for industrial furnaces and chemical processes Lighting control Solid state switches Advantages Improved temperature and power cycling Reduced protection circuits 4.5-7/40-62 Nm/lb.in. 11-13/97-115 Nm/lb.in. 650 g Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions (c) 2000 IXYS All rights reserved 748 VRSM VDSM 1-3 http://store.iiic.cc/ MCO 600 Symbol Test Conditions IRRM TVJ = TVJM; VR = VRRM VT IT VT0 rT = Characteristic Values 60 600 A; TVJ = 25C mA 1.15 V For power-loss calculations only (TVJ = TVJM) 0.77 0.42 V mW VGT VD = 6 V; IGT VD = 6 V; 2 3 300 400 V V mA mA VGD IGD TVJ = TVJM; VD = 2/3 VDRM TVJ = TVJM; VD = 2/3 VDRM 0.25 10 V mA IL TVJ = 25C; VD = 6 V; tP = 30 ms diG/dt = 1 A/ms; IG = 1 A 400 mA IH TVJ = 25C; VD = 6 V; RGK = 300 mA tgd TVJ = 25C; VD = 1/2 VDRM diG/dt = 1 A/ms; IG = 1A 2 ms tq TVJ = TVJM; VR = 100 V; VD = 2/3 VDRM; tP = 200 ms dv/dt = 50 V/ms; IT = 500 A; -di/dt = 10 A/ms typ. 350 ms RthJC RthJK DC current DC current dS dA a Creep distance on surface Strike distance in air Maximum allowable acceleration TVJ TVJ TVJ TVJ = 25C = -40C = 25C = -40C 0.065 0.085 K/W K/W 12.7 9.6 50 mm mm m/s2 Optional accessories for modules Keyed Gate/Cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red UL 758, style 1385, File E 38136, Type ZY 180 L (L = Left for pin pair 4/5) CSA class 5851, guide 460-1-1, appl. 41234 10 52 49 Dimensions in mm (1 mm = 0.0394") (c) 2000 IXYS All rights reserved 2-3 http://store.iiic.cc/ Peak reverse recovery current versus -di/dt 120 A IT = ITAVM MCC224 MCO 450 MCC255 MCO 500 MCC312 MCO 600 _ 100V VR > 100 MCC161 MCC162 MCC170 MCC225 TVJ= TVJM 80 MCC132 MCC 122 60 MCC94 MCC95 MCC72 IRM MCC56 40 MCC44 MCC 60 MCC26 MCC19 20 0 0 2 4 6 8 10 -di/dt A/ms 12 Recommended RC snubber network against hole storage effect overvoltage Type Supply Voltage VvRMS 250 V 400 V 575 V MCC/MCD/MDD 19/26 R = 68 W/6 W C = 0.22 mF R = 68 W/6 W C = 0.22 mF R = 100 W/10 W C = 0.1 mF MCC/MCD/MDD 44/56/60/72/94/95 R = 33 W/10 W C = 0.22 mF R = 47 W/10 W C = 0.22 mF R = 68 W/10 W C = 0.1 mF MCC/MCD/MDD/MCO/MDO R = 33 W/25 W 122/132/142/161/162/170/ C = 0.47 mF 172/220/225/250/255/310/ 312/450/500/600 R = 33 W/25 W C = 0.47 mF R = 47 W/25 W C = 0.1 mF (c) 2000 IXYS All rights reserved Conditions f = 40 - 60 Hz Short circuit voltage 4-6 % Voltage safety factor 2.5 3-3 http://store.iiic.cc/