MICRO SWITCHTM ZM Series Subminiature Switch Product Nomenclature For example, a ZM50E10E01 part number would define a MICRO SWITCHTM ZM Series subminiature switch with a simulated roller lever, rated at 5 A, SPDT, 146 g max. operating force, and straight solder terminals ZM 50 E 10 E 01 Switch Type Current Rating Operating Force Terminal Type Actuator Type Circuitry ZM Series Subminiature 10 Basic Switch 0.1 A 125 Vac (Gold-plated contacts) 50 5 A; 125 Vac/ 250 Vac 90 10.1 A; 125 Vac/ 250 Vac1 (at pin plunger) B D E G D E G 60 g max. 104 g max. 146 g max. 249 g max. G 249 g max. 104 g max. 146 g max. 249 g max. 10 Solder, straight A Pin plunger 01 SPDT 20 PCB, straight B Short straight lever, 16,7 mm [0.66 in] length 03 SPNO 50 PCB, right angle C 04 SPNC 60 PCB, left angle D 70 Quick connect 0.110 in E 99 SPECIAL2 F Not all combinations of model code are available. Please contact your Honeywell representative or distributor for assistance. NOTES: 1 Switches with 10.1 A rating are only available with "G" operating force. 2 Terminal Type "99" or Actuator Type "S" designates a special and therefore requires a special designator character(s) at the end of the listing. 004976-3-EN IL50 GLO January 2015 Copyright (c) 2015 Honeywell International Inc. All Rights Reserved. (Integral Levers) H J Standard straight lever, 18,7 mm [0.74 in] length Long straight lever, 24,8 mm [0.98 in] length Stnd sim. roller lever, 18,0 mm [0.71 in] length R 2,75 mm Roller lever, 16,6 mm [0.65 in] length O4,8 mm roller Small sim. roller lever, 17,9 mm [0.70 in] length R 1,3 mm Extended straight lever, 55,2 mm [2.17 in] length K Straight lever, 35,2 mm [1.39 in] length L L-shaped lever, 31,5 mm [1.24 in] length M Large sim. roller lever, 21,1 mm [0.83 in] length R 2,45 mm S SPECIAL lever2 -- Special Designator2 A special designator character(s) is used when there is a special modification to the switch. A special designator is required when Terminal Type is "99" or Actuator Type is "S".