Miniature Sensors PHOTOELECTRICS Miniature Sensors WORLD-BEAM(R) Q12 . . . . . . . . . . . page 44 * Universal housing provides consistent mounting regardless of sensing modes. * Powerful sensor fits extremely confined areas. * Opposed, retroreflective and fixed-field sensing modes are available. * Three fixed-field models offer precise cutoff background suppression. * Overmolded design delivers enhanced durability and shielding. * Solid-state outputs are bipolar (NPN and PNP). T8 . . . . . . . . . . . . . page 47 VS2 . . . . . . . . . . . page 56 * 8 mm thread ultra-miniature sensor * Convenient T-shaped package * 50 or 100 mm diffuse range * Powerful 2 m opposed range * Ultra-thin opposed and convergent * Flat front mounting * Range up to 3 m MINI-BEAM(R)2 . . . . page 50 VS3 . . . . . . . . . . . page 59 * Single push-button programming * Wrap-around status indicators * 12 mm threaded barrel or side mount * One-third the size of original MINI-BEAM (R) * Advanced coaxial lens design * Range up to 1200 mm * Accurate detection of shiny objects * S ensing up to the face of retroreflective models VS1 . . . . . . . . . . . page 53 VS4 . . . . . . . . . . . page 62 * Convergent beam sensors * 10 or 20 mm convergent point * Repeatability of 250 microseconds * Low-profile, long-range sensing * Unique, optically correct lens for narrow side light emission * Opposed mode, 1000 mm range More information online at bannerengineering.com 43 WORLD-BEAM(R) Q12 PHOTOELECTRICS Miniature Sensors (R) WORLD-BEAM Q12 Series Universal Sensors * Sets a new industry standard for ultraminiature photoelectric sensors * Features a housing just 22 by 8 by 12 mm with bipolar NPN/PNP outputs * Delivers powerful sensing performance in extremely confined areas * Rated IP67 for use in the widest range of locations and applications * Mounts directly on or inside manufacturing equipment, with robust metal-lined mounting holes consistently located on all models OPPOSED RETRO * Uses unique overmolded design for enhanced durability and shielding * Available in dark- or light-operate models P Bright LED operating status indicators visible from 360 POLAR RETRO FIXED-FIELD BRACKETS PAGE 350 Rugged sealed housing, protected circuitry QD CABLES 4-Pin Threaded Pico PAGE 379 REFLECTORS PAGE 391 Ideal for confined applications, the Q12 has a visible red sensing point to simplify sensor setup. Variety of cable and connector options APERTURES PAGE 407 44 Q12 Opposed Q12 Retroreflective Q12 Fixed-Field * 2 meter range * 1.3 millisecond response time * Embeddable in confined spaces * 700 microsecond response time * Range of 1.5 m * Ideal for difficult to access areas and detection of transparent objects (polarized retroreflective models) * Range of 15, 30, or 50 mm, depending on model * Excellent background cutoff * Low color sensitivity More information online at bannerengineering.com WORLD-BEAM(R) Q12 Miniature Sensors Bright, visible red (640 nm) sensing beam 12 mm Detailed Dimensions Solid-state bipolar outputs: one current sourcing (PNP) and one current sinking (NPN) 8.0 mm Integral cable or 150 mm pigtail with threaded Pico-style quickdisconnect 12.0 mm 23.1 mm Light operate (LO) or dark operate (DO) by model 23.1 mm 8 mm Polarized Retroreflective Models Suffix LP Opposed, Retroreflective and Fixed-field Models Suffix E, R, LV and FF WORLD-BEAM(R) Q12, 10-30V dc Models Sensing Mode/LED* Range Q126E Emitter Download PDF Cable** 2m Q126EQ Emitter Threaded 4-Pin Pico Pigtail QD Q12AB6R 2m Q12AB6RQ 2m Threaded 4-Pin Pico Pigtail QD Output Type Excess Gain Beam Pattern EGCO-1 (p. 428) BPO-1 (p. 450) EGCR-1 (p. 431) BPR-1 (p. 453) Data Sheet -- Bipolar LO OPPOSED Q12RB6R 2m Q12RB6RQ Threaded 4-Pin Pico Pigtail QD Q12AB6LV 2m Q12AB6LVQ Threaded 4-Pin Pico Pigtail QD Bipolar DO Bipolar LO 1.5 m Q12RB6LV 2m RETRO Q12RB6LVQ Threaded 4-Pin Pico Pigtail QD Q12AB6LP 2m Q12AB6LPQ Q12RB6LP P Threaded 4-Pin Pico Pigtail QD 2m Q12RB6LPQ Threaded 4-Pin Pico Pigtail QD Q12AB6FF15 2m Q12RB6FF15 Q12RB6FF15Q 15 mm Cutoff FIXED-FIELD Bipolar LO 1 m POLAR RETRO Q12AB6FF15Q Bipolar DO Threaded 4-Pin Pico Pigtail QD 2m Threaded 4-Pin Pico Pigtail QD Bipolar DO Bipolar LO Bipolar DO 119223 EGCR-2 (p. 431) BPR-2 (p. 453) EGCF-1 (p. 441) -- Visible Red LED * ** For 9 m cable, add suffix W/30 to the 2 m model number (example, Q126E W/30). A model with a pigtail QD requires a mating cable (see page 379). Retroreflective range is specified using one model BRT-60X40C retroreflector. Actual sensing range may differ, depending on efficiency and reflective area of the retroreflector in use. See Accessories for more information. More information online at bannerengineering.com 45 PHOTOELECTRICS WORLD-BEAM(R) Q12 Sensors WORLD-BEAM(R) Q12 PHOTOELECTRICS Miniature Sensors WORLD-BEAM(R) Q12, 10-30V dc (cont'd) Models Sensing Mode/LED* Q12AB6FF30 Q12AB6FF30Q Q12RB6FF30 Q12RB6FF30Q Q12AB6FF50 Q12AB6FF50Q FIXED-FIELD Q12RB6FF50 Q12RB6FF50Q Cable** Output Type 2m Threaded 4-Pin Pico Pigtail QD Bipolar LO 2m Threaded 4-Pin Pico Pigtail QD Bipolar DO 2m Threaded 4-Pin Pico Pigtail QD Bipolar LO 2m Threaded 4-Pin Pico Pigtail QD Bipolar DO Range 30 mm Cutoff 50 mm Cutoff Download PDF Excess Gain Beam Pattern EGCF-2 (p. 441) -- Data Sheet 119223 EGCF-3 (p. 441) -- Visible Red LED * ** For 9 m cable, add suffix W/30 to the 2 m model number (example, Q12AB6FF30 W/30). A model with a pigtail QD requires a mating cable (see page 379). WORLD-BEAM(R) Q12 Specifications Supply Voltage and Current 10 to 30V dc (10% max. ripple) @ 20 mA max. current Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration Bipolar: One NPN (current sinking) and one PNP (current sourcing); light operate (LO) or dark operate (DO), depending on model Output Rating 50 mA total across both outputs with overload and short circuit protection OFF-state leakage current: ON-state saturation voltage: NPN: 200 A NPN: 1.25V @ 50 mA PNP: 10 A PNP: 1.45V @ 50 mA Output Protection Circuitry Protected against false pulse on power-up; short-circuit protected. Output Response Time Opposed models: 1.3 milliseconds ON; 900 microseconds OFF All other models: 700 microseconds ON/OFF NOTE: 120 milliseconds delay on power-up; outputs do not conduct during this time. Repeatability 175 microseconds Switching Frequency Opposed models: 385 Hz Indicators 2 LED indicators: Green ON steady--Power ON Green flashing--Output overloaded Yellow ON steady--Light sensed Yellow flashing--Marginal signal Construction Polarized Retroreflective models: Thermoplastic elastomer housing with glass lens All other models: Thermoplastic elastomer housing with polycarbonate lens Environmental Rating IEC IP67 Connections 2 m or 9 m attached PVC cable, or 150 mm pigtail with threaded 4-pin Pico-style quick-disconnect fitting. QD cables are ordered separately. See page 379. Operating Conditions Temperature: -20 to +55 C Storage temperature: -30 to +75 C Relative humidity: 90% max. @ 50 C (non-condensing) All other models: 715 Hz Certifications Hookup Diagrams 46 Emitters: DC03 (p. 476) More information online at DC Models: DC06 (p. 477) bannerengineering.com T8 Series Miniature Sensors PHOTOELECTRICS T8 8 mm ThreadedMount Right-Angle Sensors * Features EZ-BEAM(R) technology, with specially designed optics and electronics for reliable sensing without adjustments * Ideal for presence sensing in small areas previously accessible only to remote sensors and fiber optic cable * Can replace range-limited 8 mm threaded-mount inductive proximity sensors * Offers visible sensing beam for easy alignment * Available in dark- or light-operate models * Available with integral cable or 150 mm pigtail quick-disconnect * Offered in opposed mode with 2 m range and diffuse mode with 50 or 100 mm range OPPOSED T8 Sensors DIFFUSE BRACKETS 16.3 mm Visible red sensing beam for easy alignment PAGE 350 Detailed Dimensions Integral cable or 150 mm pigtail with threaded Pico-style quickdisconnect QD CABLES 3-Pin Threaded Pico PAGE 378 Bright LED indicator or backside of housing 19.1 mm 15.8 mm Opposed and Diffuse Models Suffix E, R and D More information online at bannerengineering.com 47 T8 Series PHOTOELECTRICS Miniature Sensors T8, 10-30V dc Download PDF Cable** Output Type T86EV Emitter T86EVQ Emitter 2m Threaded 3-Pin Pico Pigtail QD -- T8AN6R T8AN6RQ 2m Threaded 3-Pin Pico Pigtail QD NPN/LO Models Sensing Mode/LED* T8RN6R T8RN6RQ T8AP6R T8AP6RQ Range 2.0 m OPPOSED 2m Threaded 3-Pin Pico Pigtail QD NPN/DO 2m Threaded 3-Pin Pico Pigtail QD PNP/DO T8AN6D50 T8AN6D50Q 2m Threaded 3-Pin Pico Pigtail QD NPN/LO T8RN6D50 T8RN6D50Q 2m Threaded 3-Pin Pico Pigtail QD NPN/DO 50 mm 2m Threaded 3-Pin Pico Pigtail QD PNP/LO T8RP6D50 T8RP6D50Q 2m Threaded 3-Pin Pico Pigtail QD PNP/DO T8AN6D100 T8AN6D100Q 2m Threaded 3-Pin Pico Pigtail QD NPN/LO DIFFUSE T8RN6D100 T8RN6D100Q 100 mm T8AP6D100 T8AP6D100Q Beam Pattern EGCO-2 (p. 428) BPO-2 (p. 450) EGCD-1 (p. 434) BPD-1 (p. 456) Data Sheet 68669 2m Threaded 3-Pin Pico Pigtail QD PNP/LO T8RP6R T8RP6RQ T8AP6D50 T8AP6D50Q Excess Gain 2m Threaded 3-Pin Pico Pigtail QD NPN/DO 2m Threaded 3-Pin Pico Pigtail QD PNP/LO 67584 EGCD-2 (p. 434) BPD-2 (p. 456) 2m Threaded 3-Pin Pico Pigtail QD PNP/DO T8RP6D100 T8RP6D100Q Visible Red LED * ** For 9 m cable, add suffix W/30 to the 2 m model number (example, T8AN6D50 W/30). A model with a pigtail QD requires a mating cable (see page 378). T8 Specifications 48 Supply Voltage and Current 10 to 30V dc (10% max. ripple) at less than 25 mA (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration SPST solid-state switch NPN (current sinking) or PNP (current sourcing), depending on model. Light Operate (LO) or Dark Operate (DO), depending on model. Output Rating 50 mA max. Off-state leakage current: less than 1 A at 24V dc On-state saturation voltage: less than 0.25V at 10 mA dc; less than 0.5V at 50 mA dc Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs Overload trip point 100 mA Output Response Time 1 millisecond ON and 0.5 milliseconds OFF NOTE: Maximum 100 milliseconds (150 milliseconds for Diffuse models) delay on power-up; output does not conduct during this time. Repeatability Opposed models: 100 microseconds Diffuse models: 160 microseconds More information online at bannerengineering.com T8 Series Miniature Sensors PHOTOELECTRICS T8 Specifications (cont'd) T8 Specifications Indicators Opposed Models: Receiver has both Green and Red LEDs Emitter has one Green LED Green ON steady: power to sensor is ON Green flashing: output overload Red ON steady: light is sensed Red flashing: marginal excess gain (1-1.5x) in light condition Diffuse Models: Red ON steady: On when light is sensed Construction Reinforced polycarbonate/ABS alloy housing, acrylic window Environmental Rating IEC IP67; NEMA 6 Connections 2 m or 9 m attached cable: 3-wire with PVC outer cable jacket, or 150 mm pigtail with threaded 3-pin Pico-style quick-disconnect fitting. QD cables are ordered separately. See page 378. Operating Conditions Temperature: -20 to +55 C Vibration and Mechanical Shock Vibration: All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-STD-202F Method 201A; 10 to 60 Hz, 0.5 mm peak to peak Shock: All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11 millisecond pulse duration, half-sine wave pulse shape Application Notes Reinforced polycarbonate/ABS alloy 8 mm threaded nut (included). Optional mounting bracket is available. See page 350. Relative humidity: 80% at 50 C (non-condensing) Certifications Hookup Diagrams Emitters: DC03 (p. 476) NPN Models: DC01 (p. 476) More information online at PNP Models: DC02 (p. 476) bannerengineering.com 49 MINI-BEAM(R)2 Series Miniature Sensors PHOTOELECTRICS MINI-BEAM(R)2 12 mm ThreadedBarrel Right-Angle Sensors * Delivers MINI-BEAM(R) performance in a package 66% smaller than the original * Available in opposed, polarized and nonpolarized retroreflective, diffuse and divergent diffuse, and convergent modes * Features easy push-button setup * Solid-state complementary (SPDT) outputs OPPOSED RETRO P POLAR RETRO MINI-BEAM(R)2 Sensors 8.0 mm CONVERGENT Incremental Gain control push button 25.0 mm 35.0 mm Dual-LED multi-function indicators DIFFUSE BRACKETS PAGE 350 QD CABLES 2 m or 9 m attached cable, or 150 mm Pico-style quick-disconnect pigtail 20.0 mm 20.0 mm 4-Pin Pico PAGE 378 Optional 12 mm threaded lens mounting on some models Divergent Diffuse Models Suffix DBZ and W REFLECTORS PAGE 391 8.0 mm 36.8 mm 8.0 mm Detailed Dimensions Retroreflective and Diffuse Models Suffix LV, LP and D 20.0 mm Opposed and Convergent Models Suffix E, R and CV 50 More information online at bannerengineering.com MINI-BEAM(R)2 Series Miniature Sensors Models Sensing Mode/LED* Download PDF Range QS126E Emitter QS126EQ Emitter Cable** Output Type 2m 4-pin Pico Pigtail QD -- 2m 4-pin Pico Pigtail QD NPN QS12VP6R QS12VP6RQ 2m 4-pin Pico Pigtail QD PNP QS12VN6LV QS12VN6LVQ 2m 4-pin Pico Pigtail QD NPN 2m 4-pin Pico Pigtail QD PNP QS12VN6R QS12VN6RQ PHOTOELECTRICS MINI-BEAM(R)2, 10-30V dc 4m Excess Gain Beam Pattern Data Sheet EGCO-3 (p. 428) BPO-3 (p. 450) 59040 EGCR-3 (p. 431) BPR-3 (p. 453) OPPOSED 2 m QS12VP6LV QS12VP6LVQ RETRO 59040 2m 4-pin Pico Pigtail QD NPN 2m 4-pin Pico Pigtail QD PNP 2m 4-pin Pico Pigtail QD NPN QS12VP6CV10 QS12VP6CV10Q 2m 4-pin Pico Pigtail QD PNP QS12VN6CV20 QS12VN6CV20Q 2m 4-pin Pico Pigtail QD NPN QS12VP6CV20 QS12VP6CV20Q 2m 4-pin Pico Pigtail QD PNP QS12VN6D QS12VN6DQ 2m 4-pin Pico Pigtail QD NPN QS12VP6D QS12VP6DQ 2m 4-pin Pico Pigtail QD PNP 2m 4-pin Pico Pigtail QD NPN QS12VN6LP QS12VN6LPQ QS12VP6LP QS12VP6LPQ P 1m POLAR RETRO QS12VN6CV10 QS12VN6CV10Q 10 mm EGCR-4 (p. 431) BPR-4 (p. 453) EGCC-1 (p. 437) BPC-1 (p. 459) 59040 CONVERGENT 20 mm EGCC-2 (p. 437) BPC-2 (p. 459) EGCD-3 (p. 434) BPD-3 (p. 456) EGCD-4 (p. 434) BPD-4 (p. 456) EGCD-5 (p. 434) BPD-5 (p. 456) 180 mm QS12VN6DBZ QS12VN6DBZQ DIFFUSE QS12VP6DBZ QS12VP6DBZQ QS12VN6W QS12VN6WQ DIVERGENT 2m 4-pin Pico Pigtail QD PNP 2m 4-pin Pico Pigtail QD NPN 2m 4-pin Pico Pigtail QD PNP 50 mm QS12VP6W QS12VP6WQ DIFFUSE 59040 Visible Red LED * ** For 9 m cable, add suffix W/30 to the 2 m model number (example, QS12VN6D W/30). A model with a pigtail QD requires a mating cable (see page 378). Range specifications for retroreflective sensors are largely dependent on target size and design. See Accessories section for more information on reflectors. More information online at bannerengineering.com 51 MINI-BEAM(R)2 Series PHOTOELECTRICS Miniature Sensors MINI-BEAM(R)2 Specifications Supply Voltage and Current 10 to 30V dc (10% max. ripple) at less than 25 mA, exclusive of load Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration Solid state complementary (SPDT): NPN or PNP (current sinking or sourcing) output models available Output Rating 150 mA max. each output at 25 C OFF-state leakage current: less than 10 A @ 30V dc ON-state saturation voltage: less than 1V @ 10 mA; less than 2.0V @ 150 mA Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs Output Response Time Opposed Mode: 8 milliseconds ON, 4 milliseconds OFF All others: 1.5 milliseconds NOTE: 500 millisecond delay on power-up, outputs do not conduct during this time Repeatability Opposed Mode: 1 millisecond All others: 175 microseconds Adjustments One rubber-sealed push button Hold: Max. gain Click: Reduce gain one increment Indicators 2 LEDs, visible from back and side of sensor: 1 green, 1 amber Green ON steady: Power ON Amber steady: Light sensed Green flashing rapidly 5 times: Max. gain Green Single flash: Click registered, gain reduced by one increment Amber/Green alternating: Minimum gain (can not reduce further) Construction Black polycarbonate/ABS alloy housing; totally encapsulated circuitry Environmental Rating IEC IP67; NEMA 6 Connections 2 m or 9 m PVC cable; or 4-pin Pico-style 150 mm pigtail QD. QD cables are ordered separately. See page 378. Operating Conditions Temperature: -20 to +55 C Relative humidity: 90% at 50 C (non-condensing) Certifications Hookup Diagrams 52 Emitters: DC03 (p. 476) More information online at NPN Models: DC04 (p. 476) bannerengineering.com PNP Models: DC05 (p. 477) VS1 Series Miniature Sensors PHOTOELECTRICS VS1 Miniature Convergent-Mode Sensors * Features EZ-BEAM(R) technology, with specially designed optics and electronics for reliable sensing without adjustments * Available with 10 or 20 mm focus point * Available in dark- or light-operate models * Provides high-quality, low-cost replacement for competitive miniature sensors * Available with integral cable or 150 mm pigtail quick-disconnect * Includes M2 stainless steel mounting hardware; optional mounting brackets available VS1 Sensors Dual-LED multi-function indicators CONVERGENT 8.3 mm BRACKETS 11.6 mm PAGE 350 Detailed Dimensions Visible red or infrared convergent sensing beam QD CABLES 3-Pin Threaded Pico PAGE 378 2 m or 9 m attached cable, or 150 mm pigtail with threaded 3-pin Pico-style quick-disconnect 25.7 mm Convergent Models Suffix CV, C1 and C2 More information online at bannerengineering.com 53 VS1 Series PHOTOELECTRICS Miniature Sensors VS1, 10-30V dc Models Download PDF Sensing Mode/LED* Range 2m VS1AN5CV10 VS1AN5CV10Q Threaded 3-Pin Pico Pigtail QD VS1RN5CV10 VS1RN5CV10Q 2m 10 mm 5 mm VS1AP5CV10 VS1AP5CV10Q Threaded 3-Pin Pico Pigtail QD 2m Threaded 3-Pin Pico Pigtail QD 2m VS1RP5CV10 VS1RP5CV10Q VS1AN5CV20 VS1AN5CV20Q Cable** Threaded 3-Pin Pico Pigtail QD 2m CONVERGENT VS1RN5CV20 VS1RN5CV20Q Threaded 3-Pin Pico Pigtail QD 20 mm 10 mm VS1AP5CV20 VS1AP5CV20Q 2m Threaded 3-Pin Pico Pigtail QD 2m Threaded 3-Pin Pico Pigtail QD VS1RP5CV20 VS1RP5CV20Q Threaded 3-Pin Pico Pigtail QD 2m VS1AN5C10 VS1AN5C10Q Threaded 3-Pin Pico Pigtail QD VS1RN5C10 VS1RN5C10Q Threaded 3-Pin Pico Pigtail QD 2m 2m 10 mm 5 mm VS1AP5C10 VS1AP5C10Q Threaded 3-Pin Pico Pigtail QD 2m VS1RP5C10 VS1RP5C10Q VS1AN5C20 VS1AN5C20Q 2m Threaded 3-Pin Pico Pigtail QD 2m CONVERGENT VS1RN5C20 VS1RN5C20Q VS1AP5C20 VS1AP5C20Q VS1RP5C20 VS1RP5C20Q Threaded 3-Pin Pico Pigtail QD 2m 20 mm 10 mm Threaded 3-Pin Pico Pigtail QD 2m Threaded 3-Pin Pico Pigtail QD 2m Threaded 3-Pin Pico Pigtail QD Output Type Excess Gain Beam Pattern EGCC-3 (p. 437) BPC-3 (p. 459) Data Sheet NPN/ LO NPN/ DO PNP/ LO PNP/ DO 56465 NPN/ LO NPN/ DO PNP/ LO EGCC-4 (p. 437) BPC-4 (p. 459) EGCC-5 (p. 437) BPC-5 (p. 459) PNP/ DO NPN/ LO NPN/ DO PNP/ LO PNP/ DO 56939 NPN/ LO NPN/ DO PNP/ LO EGCC-6 (p. 437) BPC-6 (p. 459) PNP/ DO Infrared LED Visible Red LED * ** For 9 m cable, add suffix W/30 to the 2 m model number (example, VS1AN5CV10 W/30). A model with a pigtail QD requires a mating cable (see page 378). 54 More information online at bannerengineering.com VS1 Series Miniature Sensors PHOTOELECTRICS VS1 Specifications Supply Voltage and Current 10 to 30V dc (10% max. ripple) at less than 25 mA (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration SPST solid-state switch NPN (current sinking) or PNP (current sourcing), depending on model. Light Operate (LO) or Dark Operate (DO) models Output Rating 50 mA max. Off-state leakage current: less than 1 A at 24V dc On-state saturation voltage: less than 0.25V at 10 mA dc; less than 0.5V at 50 mA dc Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs Overload trip point 100 mA Output Response Time 1 millisecond ON and OFF Repeatability 250 microseconds Indicators Two LEDs: Green and Yellow Green ON steady: power to sensor is ON Green flashing: output overload Yellow ON steady: light is sensed Yellow flashing: marginal excess gain (1-1.5x) in light condition Construction Black ABS/polycarbonate housing with clear acrylic lens Environmental Rating IP67; NEMA 6 Connections 2 m or 9 m attached cable: 3-wire with PVC outer cable jacket; or 150 mm pigtail with threaded 3-pin Pico-style quick-disconnect fitting. QD cables are ordered separately. See page 378. Operating Conditions Temperature: -20 to +55 C Application Notes M2 stainless steel mounting hardware included. Optional mounting brackets are available. See page 350. Relative humidity: 80% at 50 C (non-condensing) Certifications Hookup Diagrams NPN Models: DC01 (p. 476) PNP Models: DC02 (p. 476) More information online at bannerengineering.com 55 VS2 Series PHOTOELECTRICS Miniature Sensors VS2 Ultra-Thin Miniature Sensors * Features EZ-BEAM(R) technology, with specially designed optics and electronics for reliable sensing without adjustments * Available in opposed and convergent modes * Ideal as a low-cost, high-quality miniaturized solution for confined areas * Includes M2 stainless steel mounting hardware; optional mounting brackets available * Available with integral cable or 150 mm pigtail with threaded Pico-style quick-disconnect * Available in dark- or light-operate models OPPOSED CONVERGENT BRACKETS PAGE 350 QD CABLES 3-Pin Threaded Pico PAGE 378 APERTURES PAGE 407 VS2 Sensors Dual-LED multi-function indicators 12.0 mm 4.3 mm Detailed Dimensions 8 mm mounting centers Visible or infrared sensing beam 2 m or 9 m attached cable, or 150 mm pigtail with threaded 3-pin Pico-style quick-disconnect 25.1 mm 12.0 mm 4.7 mm 25.1 mm Opposed Models Suffix E and R 56 More information online at bannerengineering.com Convergent Models Suffix C VS2 Series Miniature Sensors Models Sensing Mode/LED* Download PDF Range VS25EV Emitter VS25EVQ Emitter Cable** Output Type 2m Threaded 3-Pin Pico Pigtail QD -- 2m Threaded 3-Pin Pico Pigtail QD NPN/ LO 2m Threaded 3-Pin Pico Pigtail QD NPN/ DO 2m Threaded 3-Pin Pico Pigtail QD PNP/ LO VS2RP5R VS2RP5RQ 2m Threaded 3-Pin Pico Pigtail QD PNP/ DO VS25E Emitter VS25EQ Emitter 2m Threaded 3-Pin Pico Pigtail QD -- VS2AN5R VS2AN5RQ 2m Threaded 3-Pin Pico Pigtail QD NPN/ LO 2m Threaded 3-Pin Pico Pigtail QD NPN/ DO 2m Threaded 3-Pin Pico Pigtail QD PNP/ LO VS2RP5R VS2RP5RQ 2m Threaded 3-Pin Pico Pigtail QD PNP/ DO VS2AN5CV15 2m Threaded 3-Pin Pico Pigtail QD NPN/ LO 2m Threaded 3-Pin Pico Pigtail QD NPN/ DO 2m Threaded 3-Pin Pico Pigtail QD PNP/ LO 2m Threaded 3-Pin Pico Pigtail QD PNP/ DO 2m Threaded 3-Pin Pico Pigtail QD NPN/ LO 2m Threaded 3-Pin Pico Pigtail QD NPN/ DO 2m Threaded 3-Pin Pico Pigtail QD PNP/ LO 2m Threaded 3-Pin Pico Pigtail QD PNP/ DO VS2AN5R VS2AN5RQ VS2RN5R VS2RN5RQ VS2AP5R VS2AP5RQ OPPOSED VS2RN5R VS2RN5RQ VS2AP5R VS2AP5RQ Optimum up to 600 mm, 1.2 m max. 3.0 m OPPOSED VS2AN5CV15Q VS2RN5CV15 VS2RN5CV15Q 15 mm 5 mm VS2AP5CV15 VS2AP5CV15Q VS2RP5CV15 VS2RP5CV15Q VS2AN5CV30 VS2AN5CV30Q CONVERGENT VS2RN5CV30 VS2RN5CV30Q VS2AP5CV30 VS2AP5CV30Q VS2RP5CV30 VS2RP5CV30Q PHOTOELECTRICS VS2, 10-30V dc 30 mm 10 mm Excess Gain Beam Pattern Data Sheet EGCO-4 (p. 428) BPO-4 (p. 450) 57248 EGCO-5 (p. 428) BPO-5 (p. 450) 57248 EGCC-7 (p. 437) BPC-7 (p. 459) 65411 EGCC-8 (p. 437) BPC-8 (p. 459) Infrared LED Visible Red LED * ** For 9 m cable, add suffix W/30 to the 2 m model number (example, VS2RP5R W/30). A model with a pigtail QD requires a mating cable (see page 378). Opposed-mode models also sold as pairs. Contact factory for more information. More information online at bannerengineering.com 57 VS2 Series PHOTOELECTRICS Miniature Sensors VS2 Specifications Supply Voltage and Current 10 to 30V dc (10% max. ripple) at less than 25 mA (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration SPST solid-state switch: NPN (current sinking) or PNP (current sourcing), depending on model. Light Operate (LO) or Dark Operate (DO), depending on model. Output Rating 50 mA max. Off-state leakage current: less than 1 A at 24V dc On-state saturation voltage: less than 0.25V at 10 mA dc; less than 0.5V at 50 mA dc Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs Overload trip point 100 mA Output Response Time Opposed: 1 millisecond ON and 0.5 millisecond OFF; Convergent: 1 millisecond ON and OFF NOTE: Maximum 100 millisecond (opposed mode) and 150 millisecond (convergent) delay on power-up; output does not conduct during this time. Repeatability Opposed Mode: 100 microseconds Indicators Two LEDs: Green and Yellow Green ON steady: power to sensor is ON Green flashing: output overload Yellow ON steady: light is sensed Yellow flashing: marginal excess gain (1-1.5x) in light condition (opposed mode only) Construction Opposed: Black ABS housing with clear MABS lens Convergent: Black ABS housing with acrylic lens Environmental Rating IEC IP67; NEMA 6 Connections 2 m or 9 m attached cable, 3-wire with PVC outer cable jacket; or 3-pin Pico-style 150 mm threaded pigtail quickdisconnect fitting. QD cables are ordered separately. See page 378. Operating Conditions Temperature: -20 to +55 C Relative humidity: 80% at 50 C (non-condensing) Vibration and Mechanical Shock Vibration: All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-STD-202F Method 201A; 10 to 60 Hz, 0.5 mm peak to peak Shock: All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11 millisecond pulse duration, halfsine wave pulse shape Application Notes M2 stainless steel mounting hardware included. Optional mounting brackets are available. See page 350. Convergent: 160 microseconds Certifications Hookup Diagrams 58 More information online at Emitters: DC03 (p. 476) NPN Models: DC01 (p. 476) bannerengineering.com PNP Models: DC02 (p. 476) VS3 Series Miniature Sensors PHOTOELECTRICS VS3 Miniature Sensors with Advanced Optics * Features EZ-BEAM(R) technology, with specially designed optics and electronics for reliable sensing without adjustments * Offers extremely compact self-contained miniature design * Available in opposed and retroreflective sensing modes * Uses coaxial optics on retroreflective models to eliminate blind areas at close range * Features visible sensing beam for easy alignment * Available in dark- or light-operate models * Available with integral cable or threaded Picostyle quick-disconnect OPPOSED COAXIAL RETRO VS3 Sensors COAXIAL Dual-LED multi-function indicators 2 m or 9 m integral cable, or 3-pin threaded Pico-style quick disconnect P 9.0 mm POLAR RETRO 15.6 mm Detailed Dimensions BRACKETS PAGE 350 QD CABLES 16.6 mm Extremely compact housing 3-Pin Threaded Pico 25.4 mm PAGE 378 9 mm REFLECTORS PAGE 391 25.4 mm Polarized Retroreflective Models Suffix LP Opposed, Non-Polarized Retroreflective Models Suffix R, EV and LV More information online at bannerengineering.com 59 VS3 Series PHOTOELECTRICS Miniature Sensors VS3, 10-30V dc Models Download PDF Sensing Mode/LED* Range Cable** 2m VS35EV Emitter Threaded 3-Pin Pico QD VS35EVQ Emitter 2m VS3AN5R Threaded 3-Pin Pico QD VS3AN5RQ VS3RN5R 1.2 m VS3RN5RQ 2m Threaded 3-Pin Pico QD Output Type Excess Gain Beam Pattern Data Sheet EGCO-6 (p. 428) BPO-6 (p. 450) 63227 EGCR-5 (p. 431) BPR-5 (p. 453) -- NPN/LO NPN/DO OPPOSED 2m VS3AP5R VS3AP5RQ Threaded 3-Pin Pico QD VS3RP5R 2m VS3RP5RQ Threaded 3-Pin Pico QD VS3AN5XLV 2m VS3AN5XLVQ Threaded 3-Pin Pico QD VS3RN5XLV 2m Threaded 3-Pin Pico QD VS3RN5XLVQ PNP/L0 PNP/DO NPN/LO NPN/DO 250 mm VS3AP5XLV 2m COAXIAL RETRO VS3AP5XLVQ Threaded 3-Pin Pico QD VS3RP5XLV 2m VS3RP5XLVQ Threaded 3-Pin Pico QD VS3AN5XLP 2m PNP/LO PNP/DO 63226 Threaded 3-Pin Pico QD VS3AN5XLPQ 2m VS3RN5XLP COAXIAL VS3RN5XLPQ VS3AP5XLP VS3AP5XLPQ 2m POLAR RETRO VS3RP5XLPQ NPN/DO EGCR-6 (p. 431) 250 mm P VS3RP5XLP Threaded 3-Pin Pico QD NPN/LO Threaded 3-Pin Pico QD 2m Threaded 3-Pin Pico QD BPR-6 (p. 453) PNP/LO PNP/DO Visible Red LED * ** For 9 m cable, add suffix W/30 to the 2 m model number (example, VS3AN5XLV W/30). A model with a pigtail QD requires a mating cable (see page 378). Opposed-mode models also sold as pairs. Contact factory for more information. Retroreflective range is specified using one model BRT-32X20AM retroreflector. Actual sensing range may differ, depending on efficiency and reflective area of the retroreflector in use. See Accessories for more information. 60 More information online at bannerengineering.com VS3 Series Miniature Sensors PHOTOELECTRICS VS3 Specifications Supply Voltage and Current 10 to 30V dc (10% max. ripple) at less than 25 mA (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration SPST solid-state switch NPN (current sinking) or PNP (current sourcing), depending on model. Light Operate (LO) or Dark Operate (DO), depending on model. Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs. Overload trip point 100 mA Output Rating 50 mA max. Off-state leakage current: less than 1 A at 24V dc On-state saturation voltage: less than 0.25V at 10 mA dc; less than 0.5V at 50 mA dc Output Response Time Opposed: 1 millisecond ON and 0.5 millisecond OFF; Retroreflective: 1 millisecond ON and OFF NOTE: Maximum 100 millisecond (opposed mode) and 150 millisecond (retroreflective) delay on power-up; output does not conduct during this time. Repeatability Opposed: 100 microseconds Retroreflective: 160 microseconds Indicators Two LEDs: Green and Yellow Green ON steady: power to sensor is ON Green flashing: output overload Yellow ON steady: light is sensed Yellow flashing: marginal excess gain (1-1.5x) in light condition (opposed mode only) Construction Opposed and Non-polarized Retroreflective Models: Black ABS housing with acrylic lens Polarized Retroreflective Models: Black ABS housing with glass lens and acrylic cover Environmental Rating IEC IP67; NEMA 6 Connections 2 m or 9 m attached cable, 3-wire with PVC outer cable jacket; or 3-pin Pico-style threaded quick-disconnect fitting. QD cables are ordered separately. See page 378. Operating Conditions Temperature: -20 to +55 C Vibration and Mechanical Shock Vibration: All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-STD-202F Method 201A; 10 to 60 Hz, 0.5 mm peak to peak Shock: All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11 millisecond pulse duration, half-sine wave pulse shape Application Notes M3 stainless steel mounting hardware included. Optional mounting brackets are available. See page 350. Relative humidity: 80% at 50 C (non-condensing) Certifications Hookup Diagrams Emitters: DC03 (p. 476) NPN Models: DC01 (p. 476) More information online at PNP Models: DC02 (p. 476) bannerengineering.com 61 VS4 Series PHOTOELECTRICS Miniature Sensors VS4 Ultra-Thin Right-Angle Miniature Sensors * Features EZ-BEAM(R) technology, with specially designed optics and electronics for reliable sensing without adjustments * Features totally self-contained opposed-mode miniature design * Offers advanced sensing circuitry for powerful, precise sensing * Features bright visible red sensing beam for easy alignment * Delivers powerful 1.0 m sensing range * Available in dark- or light-operate models * Provides horizontal mounting capability and extremely small size for mounting in narrow confines OPPOSED BRACKETS PAGE 350 QD CABLES 3-Pin Threaded Pico PAGE 378 APERTURES PAGE 407 VS4 Sensors 12.5 mm Two bright LED indicators 4.75 mm Detailed Dimensions Visible red sensing beam 2 m or 9 m attached cable, or 150 mm pigtail with threaded 3-pin Pico-style quick-disconnect 25.4 mm Low-profile housing--only 4.75 mm thick Opposed Models Suffix E and R 62 More information online at bannerengineering.com VS4 Series Miniature Sensors Models PHOTOELECTRICS VS4, 10-30V dc Download PDF Sensing Mode/LED* Range Cable** Output Type VS4EV Emitter VS4EVQ Emitter 2m Threaded 3-pin Pico Pigtail QD -- VS4AN5R VS4AN5RQ 2m Threaded 3-pin Pico Pigtail QD NPN/ LO 2m Threaded 3-pin Pico Pigtail QD NPN/ DO VS4AP5R VS4AP5RQ 2m Threaded 3-pin Pico Pigtail QD PNP/ LO VS4RP5R VS4RP5RQ 2m Threaded 3-pin Pico Pigtail QD PNP/ DO VS4RN5R VS4RN5RQ 1.0 m Excess Gain Beam Pattern EGCO-7 (p. 428) BPO-7 (p. 450) Data Sheet 69421 OPPOSED Visible Red LED * ** For 9 m cable, add suffix W/30 to the 2 m model number (example, VS4RP5R W/30). A model with a pigtail QD requires a mating cable (see page 378). VS4 Specifications Supply Voltage and Current 10 to 30V dc (10% max. ripple) Emitter: 25 mA Receiver: 25 mA (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration SPST solid-state switch NPN (current sinking) or PNP (current sourcing), depending on model. Light Operate (LO) or Dark Operate (DO), depending on model. Output Rating 50 mA max. Off-state leakage current: less than 1 A at 24V dc On-state saturation voltage: less than 0.25V at 10 mA dc; less than 0.5V at 50 mA dc Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs Overload trip point 100 mA Output Response Time 1 millisecond ON and 0.5 milliseconds OFF NOTE: 100 millisecond delay on power-up; output does not conduct during this time. Repeatability 100 microseconds Indicators Two LEDs: Green and Yellow Green ON steady: power to sensor is ON Green flashing: output overload Yellow ON steady: light is sensed Yellow flashing: marginal excess gain (1 to 1.5x) in light condition Construction Polycarbonate mounting holes and lens Low pressure molded thermoplastic housing (UL 94-V0) Environmental Rating IP67; NEMA 6 Connections 2 m or 9 m attached cable, 3-wire with PVC outer cable jacket; or 150 mm pigtail with threaded 3-pin Pico-style quick-disconnect fitting. QD cables are ordered separately. See page 378. Operating Conditions Temperature: -20 to +55 C Vibration and Mechanical Shock Vibration: All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-STD-202F Method 201A; 10 to 60 Hz, 0.5 mm peak to peak Shock: All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11 millisecond pulse duration, halfsine wave pulse shape Application Notes M2 stainless steel mounting hardware included. Optional mounting bracket available. See page 350. Relative humidity: 80% at 50 C (non-condensing) Certifications Hookup Diagrams Emitters: DC03 (p. 476) NPN Models: DC01 (p. 476) More information online at PNP Models: DC02 (p. 476) bannerengineering.com 63 PHOTOELECTRICS Miniature Sensors 64 More information online at bannerengineering.com