VS-90-110MT.KPbF Series
www.vishay.com Vishay Semiconductors
Revision: 17-Aug-17 1Document Number: 94352
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Three Phase Bridge
(Power Modules), 90 A/110 A
FEATURES
• Package fully compatible with the industry
standard INT-A-PAK power modules series
• High thermal conductivity package, electrically
insulated case
• Excellent power volume ratio, outline for easy connections
to power transistor and IGBT modules
• 4000 VRMS isolating voltage
• UL E78996 approved
• Designed and qualified for industrial level
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
A range of extremely compact, encapsulated three phase
bridge rectifiers offering efficient and reliable operation.
They are intended for use in general purpose and heavy duty
applications.
ELECTRICAL SPECIFICATIONS
PRIMARY CHARACTERISTICS
IO 90 A to 110 A
VRRM 800 V to 1600 V
Package MTK
Circuit configuration Three phase bridge
MTK
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES
90MT.K
VALUES
110MT.K UNITS
IO
90 (120) 110 (150) A
TC90 (61) 90 (57) °C
IFSM
50 Hz 770 950 A
60 Hz 810 1000
I2t50 Hz 3000 4500 A2s
60 Hz 2700 4100
I2t 30 000 45 000 A2s
VRRM Range 800 to 1600 V
TStg Range -40 to 150 °C
TJ-40 to 150
VOLTAGE RATINGS
TYPE NUMBER VOLTAGE
CODE
VRRM, MAXIMUM
REPETITIVE PEAK
REVERSE VOLTAGE
V
VRSM, MAXIMUM
NON-REPETITIVE PEAK
REVERSE VOLTAGE
V
IRRM MAXIMUM
AT TJ = MAXIMUM
mA
VS-90MT..K
VS-110MT..K
80 800 900
10
100 1000 1100
120 1200 1300
140 1400 1500
160 1600 1700
VS-90-110MT.KPbF Series
www.vishay.com Vishay Semiconductors
Revision: 17-Aug-17 2Document Number: 94352
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES
90MT.K
VALUES
110MT.K UNITS
Maximum DC output current at case
temperature IO120° rect. conduction angle 90 (120) 110 (150) A
90 (61) 90 (57) °C
Maximum peak, one-cycle
forward, non-repetitive surge current IFSM
t = 10 ms No voltage
reapplied
Initial
TJ = TJ maximum
770 950
A
t = 8.3 ms 810 1000
t = 10 ms 100 % VRRM
reapplied
650 800
t = 8.3 ms 680 840
Maximum I2t for fusing I2t
t = 10 ms No voltage
reapplied
3000 4500
A2s
t = 8.3 ms 2700 4100
t = 10 ms 100 % VRRM
reapplied
2100 3200
t = 8.3 ms 1900 2900
Maximum I2t for fusing I2t t = 0.1 ms to 10 ms, no voltage reapplied 30 000 45 000 A2s
Low level value of
threshold voltage VF(TO)1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ maximum 0.89 0.81 V
High level value of threshold voltage VF(TO)2 (I > x IF(AV)), TJ maximum 1.05 0.99
Low level value of forward
slope resistance rf1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ maximum 5.11 4.37
m
High level value of forward
slope resistance rf2 (I > x IF(AV)), TJ maximum 4.64
Maximum forward voltage drop VFM Ipk = 150 A, TJ = 25 °C
tp = 400 μs single junction 1.6 1.4
V
RMS isolation voltage VISOL TJ = 25 °C, all terminal shorted
f = 50 Hz, t = 1 s 4000
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES
90MT.K
VALUES
110MT.K UNITS
Maximum junction operating and
storage temperature range TJ, TStg -40 to 150 °C
Maximum thermal resistance,
junction to case RthJC
DC operation per module 0.21 0.18
°C/W
DC operation per junction 1.26 1.07
120° rect. conduction angle per module 0.25 0.21
120° rect. conduction angle per junction 1.47 1.25
Maximum thermal resistance,
case to heatsink per module RthCS Mounting surface smooth, flat and greased 0.03
Mounting
torque ± 10 %
to heatsink A mounting compound is recommended and the
torque should be rechecked after a period of
3 h to allow for the spread of the compound.
Lubricated threads.
4 to 6 Nm
to terminal 3 to 4
Approximate weight 176 g
VS-90-110MT.KPbF Series
www.vishay.com Vishay Semiconductors
Revision: 17-Aug-17 3Document Number: 94352
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Current Ratings Characteristics Fig. 2 - Forward Voltage Drop Characteristics
Fig. 3 - Total Power Loss Characteristics
Fig. 4 - Maximum Non-Repetitive Surge Current Fig. 5 - Maximum Non-Repetitive Surge Current
Maximum Allowable Case
Temperature (°C)
Total Output Current (A)
25 50 75 100 125
0
120°
(Rect)
90MT..K Series
+
-
~
150
50
60
70
80
90
100
110
120
130
140
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
12345
0
1000
1
10
100
TJ = 25 °C
90MT..K Series
Per junction
TJ = 150 °C
Maximum Total Power Loss (W)
Total Output Current (A)
20 40 60 80 100 120
0
400
0
50
100
150
200
250
300
350
120°
(Rect.)
90MT..K Series
TJ = 150 °C
Maximum Total Power Loss (W)
Maximum Allowable Ambient
Temperature (°C)
25 50 75 100 125 150
0
R
thSA
= 0.05 K/W - ΔR
0.12 K/W
0.2 K/W
0.3 K/W
0.05 K/W
0.7 K/W
1.0 K/W
1.5 K/W
400
0
50
100
150
200
250
300
350
Peak Half Sine Wave
Forward Current (A)
Number of Equal Amplitude Half
Cycle Current Pulses (N)
10 100
1
700
200
250
300
350
400
450
500
550
600
650
90MT..K Series
at 60 Hz 0.0083 s
at 50 Hz 0.0100 s
At any rated load condition and with
rated VRRM applied following surge.
Initial TJ = 150 °C
Peal Half Sine Wave
Forward Current (A)
Pulse Train Duration (s)
0.1 1.00.01
800
150
300
350
200
250
400
450
500
600
650
700
750
90MT..K Series
Maximum non-repetitive surge current
Initial TJ = 150 °C
No voltage reapplied
Rated VRRM reapplied
versus pulse train duration.
VS-90-110MT.KPbF Series
www.vishay.com Vishay Semiconductors
Revision: 17-Aug-17 4Document Number: 94352
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 6 - Current Ratings Characteristics Fig. 7 - Forward Voltage Drop Characteristics
Fig. 8 - Total Power Loss Characteristics
Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 10 - Maximum Non-Repetitive Surge Current
Maximum Allowable Case
Temperature (°C)
Total Output Current (A)
20 40 60 80 100 160140120
0
120°
(Rect.)
110MT..K Series
+
-
~
150
50
60
70
80
90
100
110
120
130
140
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
123450
110MT..K Series
Per junction
TJ = 25 °C
TJ = 150 °C
1000
1
10
100
Maximum Total Power Loss (W)
Total Output Current (A)
25 50 75 100 125 150
0
120°
(Rect.)
110MT..K Series
TJ = 150 °C
450
0
50
100
150
200
250
300
350
400
Maximum Total Power Loss (W)
Maximum Allowable Ambient
Temperature (°C)
25 50 75 100 150125
0
450
0
50
100
150
200
250
300
350
400
R
thSA
= 0.05 K/W - ΔR
0.12 K/W
0.2 K/W
0.3 K/W
0.4 K/W
0.5 K/W
0.7 K/W
1.0 K/W
1.5 K/W
Peak Half Sine Wave
Forward Current (A)
Number of Equal Amplitude Half
Cycle Current Pulses (N)
10 1001
900
200
300
400
500
600
700
800
110MT..K Series
At any rated load condition and with
at 60 Hz 0.0083 s
at 50 Hz 0.0100 s
rated VRRM applied following surge.
Initial TJ = 150 °C
Peak Half Sine Wave
Forward Current (A)
Pulse Train Duration (s)
0.1 1
0.01
1000
200
400
600
700
800
900
300
500
110MT..K Series
Initial TJ = 150 °C
No voltage reapplied
Rated VRRM reapplied
versus pulse train duration.
Maximum non-repetitive surge current
VS-90-110MT.KPbF Series
www.vishay.com Vishay Semiconductors
Revision: 17-Aug-17 5Document Number: 94352
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 11 - Thermal Impedance ZthJC Characteristic
ORDERING INFORMATION TABLE
Note
• To order the optional hardware go to www.vishay.com/doc?95172
CIRCUIT CONFIGURATION
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95004
0.01
0.1
1
10
0.001 0.01 0.1 1
Square Wave Pulse Duration (s)
ZthJC - Transient Thermal
Impedance (°C/W)
10
90MT..K Series
110MT..K Series
Per junction
Steady state value
RthJC = 1.26 K/W
RthJC = 1.07 K/W
(DC operation)
Device code
2
13
2- Current rating code: 9 = 90 A (average)
3- Three phase diodes bridge
1- Vishay Semiconductors product
4- Essential part number
5- Voltage code x 10 = VRRM (see Voltage Ratings table)
6- PbF = Lead (Pb)-free
6
4
11 = 110 A (average)
PbFK160MT011VS-
5
A
B
C
D
E
F
+
-
~
Document Number: 95004 For technical questions, contact: indmodules@vishay.com www.vishay.com
Revision: 27-Aug-07 1
MTK (with and without optional barrier)
Outline Dimensions
Vishay Semiconductors
DIMENSIONS WITH OPTIONAL BARRIERS in millimeters (inches)
24 ± 0.5
(0.94 ± 0.02)
38 ± 0.5
(1.5 ± 0.02)
30 ± 0.5
(1.17 ± 0.02)
35 ± 0.3
(1.38 ± 0.01)
8.5 ± 0.5
(0.34 ± 0.02)
Fast-on tab 2.8 x 0.8 (type 110)
Screws M5 x 0.8 length 10
28 ± 1
(1.11 ± 0.04)
25.5 ± 0.5
(1.004 ± 0.02)
5 ± 0.3
(0.2 ± 0.01)
75 ± 0.5
(2.95 ± 0.02)
46 ± 0.3
(1.81 ± 0.01)
80 ± 0.3
(3.15 ± 0.01)
94 ± 0.3
(3.7 ± 0.01)
Ø 6.5 ± 0.2
(Ø 0.26 ± 0.01)
14 ± 0.3
(0.55 ± 0.01)
18 ± 0.3
(0.71 ± 0.01)
12
34
56
78
ABC
F
E
D
www.vishay.com For technical questions, contact: indmodules@vishay.com Document Number: 95004
2Revision: 27-Aug-07
Outline Dimensions
Vishay Semiconductors MTK (with and without optional barrier)
DIMENSIONS WITHOUT OPTIONAL BARRIERS in millimeters (inches)
24 ± 0.5
(0.94 ± 0.02)
30 ± 0.5
(1.17 ± 0.02)
35 ± 0.3
(1.38 ± 0.01)
8.5 ± 0.5
(0.34 ± 0.02)
Fast-on tab 2.8 x 0.8 (type 110)
Screws M5 x 0.8 length 10
28 ± 1
(1.11 ± 0.04)
25.5 ± 0.5
(1.004 ± 0.02)
5 ± 0.3
(0.2 ± 0.01)
75 ± 0.5
(2.95 ± 0.02)
46 ± 0.3
(1.81 ± 0.01)
80 ± 0.3
(3.15 ± 0.01)
94 ± 0.3
(3.7 ± 0.01)
Ø 6.5 ± 0.2
(Ø 0.26 ± 0.01)
14 ± 0.3
(0.55 ± 0.01)
18 ± 0.3
(0.71 ± 0.01)
12
34
56
78
ABC
F
E
D
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
