S-5716ACDH0-I4T1U - Seiko Instruments USA, Inc.

S-5716 Series

www.sii-ic.com

LOW CURRENT CONSUMPTION

BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

Seiko Instruments Inc. 1

The S-5716 Series, developed by CMOS technology, is a high-accuracy Hall IC that operates with low current consumption.

The output voltage changes when the S-5716 Series detects the intensity level of flux density. Using the S-5716 Series with

a magnet makes it possible to detect the open / close in various devices.

High-density mounting is possible by using the small SOT-23-3 package or the super small SNT-4A package.

Due to its high-accuracy magnetic characteristics, the S-5716 Series can make operation's dispersion in the system

combined with magnet smaller.

Caution This product is intended to use in general electronic devices such as consumer electronics, office

equipment, and communications devices. Before using the product in medical equipment or automobile

equipment including car audio, keyless entry and engine control unit, contact to SII is indispensable.

 Features

• Pole detection*1: Detection of both poles, S pole or N pole

• Detection logic for magnetism*1: Active "L", active "H"

• Output form*1: Nch open-drain output, CMOS output

• Magnetic sensitivity*1: BOP = 1.8 mT typ.

B OP = 3.0 mT typ.

B OP = 4.5 mT typ.

B OP = 7.0 mT typ.

• Operating cycle (current consumption): Product with both poles detection

CYCLE = 50.50 ms (4.0 μA) typ.

Product with S pole or N pole detection

CYCLE = 50.85 ms (2.6 μA) typ.

• Power supply voltage range: VDD = 2.7 V to 5.5 V

• Operation temperature range: Ta = −40°C to +85°C

• Lead-free (Sn 100%), halogen-free*2

*1. The option can be selected.

*2. Refer to " Product Name Structure" for details.

 Applications

• Plaything, portable game

• Home appliance

• Housing equipment

• Industrial equipment

 Packages

• SOT-23-3

• SNT-4A

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

S-5716 Series Rev.1.2_00

Seiko Instruments Inc.

 Block Diagrams

1. Nch open-drain output product

OUT

VDD

VSS

*1 *1

Sleep / Awake logic

Chopping

stabilized amplifier

*1. Parasitic diode

Figure 1

2. CMOS output product

OUT

VDD

VSS

Sleep / Awake logic

Chopping

stabilized amplifier

*1. Parasitic diode

Figure 2

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

Rev.1.2_00 S-5716 Series

Seiko Instruments Inc. 3

 Product Name Structure

1. Product name

S-5716 A x x x x - xxxx U

Environmental code

U : Lead-free (Sn 100%), halogen-free

Package name (abbreviation) and packing specifications*1

M3T1 : SOT-23-3, Tape

I4T1 : SNT-4A, Tape

Magnetic sensitivity

0 : BOP = 1.8 mT typ.

1 : BOP = 3.0 mT typ.

2 : BOP = 4.5 mT typ.

3 : BOP = 7.0 mT typ.

Detection logic for magnetism

L : Active "L"

H : Active "H"

Pole detection

D : Detection of both poles

S : Detection of S pole

N : Detection of N pole

Output form

N : Nch open-drain output

C : CMOS output

Operating cycle

A : tCYCLE = 50.50 ms typ.

(product with both poles detection)

tCYCLE = 50.85 ms typ.

(product with S pole or N pole detection)

*1. Refer to the tape drawing.

2. Packages

Table 1 Package Drawing Code

Package name Dimension Tape Reel Land

SOT-23-3 MP003-C-P-SD MP003-C-C-SD MP003-Z-R-SD −

SNT-4A PF004-A-P-SD PF004-A-C-SD PF004-A-R-SD PF004-A-L-SD

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

S-5716 Series Rev.1.2_00

Seiko Instruments Inc.

3. Product name list

3. 1 SOT-23-3

3. 1. 1 Nch open-drain output product

Table 2

Product Name Operating Cycle

(tCYCLE) Output Form Pole Detection Detection Logic

for Magnetism

Magnetic

Sensitivity (BOP)

S-5716ANDL0-M3T1U 50.50 ms Nch open-drain output Both poles Active "L" 1.8 mT typ.

S-5716ANDL1-M3T1U 50.50 ms Nch open-drain output Both poles Active "L" 3.0 mT typ.

S-5716ANDL2-M3T1U 50.50 ms Nch open-drain output Both poles Active "L" 4.5 mT typ.

S-5716ANSL1-M3T1U 50.85 ms Nch open-drain output S pole Active "L" 3.0 mT typ.

S-5716ANSL2-M3T1U 50.85 ms Nch open-drain output S pole Active "L" 4.5 mT typ.

Remark Please contact our sales office for products other than the above.

3. 1. 2 CMOS output product

Table 3

Product Name Operating Cycle

(tCYCLE) Output Form Pole Detection Detection Logic

for Magnetism

Magnetic

Sensitivity (BOP)

S-5716ACDL0-M3T1U 50.50 ms CMOS output Both poles Active "L" 1.8 mT typ.

S-5716ACDL1-M3T1U 50.50 ms CMOS output Both poles Active "L" 3.0 mT typ.

S-5716ACDL2-M3T1U 50.50 ms CMOS output Both poles Active "L" 4.5 mT typ.

S-5716ACDL3-M3T1U 50.50 ms CMOS output Both poles Active "L" 7.0 mT typ

S-5716ACDH0-M3T1U 50.50 ms CMOS output Both poles Active "H" 1.8 mT typ.

S-5716ACDH1-M3T1U 50.50 ms CMOS output Both poles Active "H" 3.0 mT typ.

S-5716ACDH2-M3T1U 50.50 ms CMOS output Both poles Active "H" 4.5 mT typ.

S-5716ACSL1-M3T1U 50.85 ms CMOS output S pole Active "L" 3.0 mT typ.

S-5716ACSL2-M3T1U 50.85 ms CMOS output S pole Active "L" 4.5 mT typ.

Remark Please contact our sales office for products other than the above.

3. 2 SNT-4A

3. 2. 1 Nch open-drain output product

Table 4

Product Name Operating Cycle

(tCYCLE) Output Form Pole Detection Detection Logic

for Magnetism

Magnetic

Sensitivity (BOP)

S-5716ANDL0-I4T1U 50.50 ms Nch open-drain output Both poles Active "L" 1.8 mT typ.

S-5716ANDL1-I4T1U 50.50 ms Nch open-drain output Both poles Active "L" 3.0 mT typ.

S-5716ANDL2-I4T1U 50.50 ms Nch open-drain output Both poles Active "L" 4.5 mT typ.

S-5716ANSL1-I4T1U 50.85 ms Nch open-drain output S pole Active "L" 3.0 mT typ.

S-5716ANSL2-I4T1U 50.85 ms Nch open-drain output S pole Active "L" 4.5 mT typ.

Remark Please contact our sales office for products other than the above.

3. 2. 2 CMOS output product

Table 5

Product Name Operating Cycle

(tCYCLE) Output Form Pole Detection Detection Logic

for Magnetism

Magnetic

Sensitivity (BOP)

S-5716ACDL0-I4T1U 50.50 ms CMOS output Both poles Active "L" 1.8 mT typ.

S-5716ACDL1-I4T1U 50.50 ms CMOS output Both poles Active "L" 3.0 mT typ.

S-5716ACDL2-I4T1U 50.50 ms CMOS output Both poles Active "L" 4.5 mT typ.

S-5716ACDH0-I4T1U 50.50 ms CMOS output Both poles Active "H" 1.8 mT typ.

S-5716ACDH1-I4T1U 50.50 ms CMOS output Both poles Active "H" 3.0 mT typ.

S-5716ACDH2-I4T1U 50.50 ms CMOS output Both poles Active "H" 4.5 mT typ.

S-5716ACSL1-I4T1U 50.85 ms CMOS output S pole Active "L" 3.0 mT typ.

S-5716ACSL2-I4T1U 50.85 ms CMOS output S pole Active "L" 4.5 mT typ.

Remark Please contact our sales office for products other than the above.

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

Rev.1.2_00 S-5716 Series

Seiko Instruments Inc. 5

 Pin Configurations

1. SOT-23-3

Table 6

Pin No. Symbol Description

1 VSS GND pin

2 VDD Power supply pin

3 OUT Output pin

Top view

Figure 3

2. SNT-4A

Table 7

Pin No. Symbol Description

1 VDD Power supply pin

2 VSS GND pin

NC*1 No connection

4 OUT Output pin

Top view

Figure 4

*1. The NC pin is electrically open.

The NC pin can be connected to the VDD pin or the VSS pin.

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

S-5716 Series Rev.1.2_00

Seiko Instruments Inc.

 Absolute Maximum Ratings

Table 8

(Ta = +25°C unless otherwise specified)

Item Symbol Absolute Maximum Rating Unit

Power supply voltage VDD VSS − 0.3 to VSS + 7.0 V

Output current IOUT ±2.0 mA

Nch open-drain output product VSS − 0.3 to VSS + 7.0 V

Output voltage CMOS output product VOUT VSS − 0.3 to VDD + 0.3 V

SOT-23-3 430*1 mW

Power dissipation SNT-4A PD 300*1 mW

Operation ambient temperature Topr −40 to +85 °C

Storage temperature Tstg −40 to +125 °C

*1. When mounted on board

[Mounted board]

(1) Board size: 114.3 mm × 76.2 mm × t1.6 mm

(2) Name: JEDEC STANDARD51-7

Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical

damage. These values must therefore not be exceeded under any conditions.

Power Dissipation (P

) [mW]

Ambient Temperature (Ta) [°C]

050 100 150

400

600

200

SNT-4A

SOT-23-3

Figure 5 Power Dissipation of Package (When Mounted on Board)

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

Rev.1.2_00 S-5716 Series

Seiko Instruments Inc. 7

 Electrical Characteristics

1. Product with both poles detection

1. 1 S-5716AxDxx

Table 9

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit

Test

Circuit

Power supply voltage VDD − 2.7 5.0 5.5 V −

Current consumption IDD Average value − 4.0 8.0 μA 1

Nch open-drain

output product

Output transistor Nch,

IOUT = 2 mA − − 0.4 V 2

Output transistor Nch,

IOUT = 2 mA − − 0.4 V 2

Output voltage VOUT

CMOS output product Output transistor Pch,

IOUT = −2 mA

VDD −

0.4 − − V 3

Leakage current ILEAK Nch open-drain output product

Output transistor Nch, VOUT = 5.5 V − − 1 μA 4

Awake mode time tAW − − 0.10 − ms −

Sleep mode time tSL − − 50.40 − ms −

Operating cycle tCYCLE tAW + t

SL − 50.50 100.00 ms −

2. Product with S pole or N pole detection

2. 1 S-5716AxSxx, S-5716AxNxx

Table 10

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit

Test

Circuit

Power supply voltage VDD − 2.7 5.0 5.5 V −

Current consumption IDD Average value − 2.6 5.0 μA 1

Nch open-drain

output product

Output transistor Nch,

IOUT = 2 mA − − 0.4 V 2

Output transistor Nch,

IOUT = 2 mA − − 0.4 V 2

Output voltage VOUT

CMOS output product Output transistor Pch,

IOUT = −2 mA

VDD −

0.4 − − V 3

Leakage current ILEAK Nch open-drain output product

Output transistor Nch, VOUT = 5.5 V − − 1 μA 4

Awake mode time tAW − − 0.05 − ms −

Sleep mode time tSL − − 50.80 − ms −

Operating cycle tCYCLE tAW + t

SL − 50.85 100.00 ms −

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

S-5716 Series Rev.1.2_00

Seiko Instruments Inc.

 Magnetic Characteristics

1. Product with both poles detection

1. 1 BOP = 1.8 mT typ.

Table 11

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

S pole BOPS − 0.9 1.8 2.7 mT 5

Operation point*1 N pole BOPN − −2.7 −1.8 −0.9 mT 5

S pole BRPS − 0.3 1.2 2.2 mT 5

Release point*2 N pole BRPN − −2.2 −1.2 −0.3 mT 5

S pole BHYSS B

HYSS = BOPS − BRPS − 0.6 − mT 5

Hysteresis width*3 N pole BHYSN B

HYSN = |BOPN − BRPN| − 0.6 − mT 5

1. 2 BOP = 3.0 mT typ.

Table 12

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

S pole BOPS − 1.4 3.0 4.0 mT 5

Operation point*1 N pole BOPN − −4.0 −3.0 −1.4 mT 5

S pole BRPS − 1.1 2.2 3.7 mT 5

Release point*2 N pole BRPN − −3.7 −2.2 −1.1 mT 5

S pole BHYSS B

HYSS = BOPS − BRPS − 0.8 − mT 5

Hysteresis width*3 N pole BHYSN B

HYSN = |BOPN − BRPN| − 0.8 − mT 5

1. 3 BOP = 4.5 mT typ.

Table 13

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

S pole BOPS − 2.5 4.5 6.0 mT 5

Operation point*1 N pole BOPN − −6.0 −4.5 −2.5 mT 5

S pole BRPS − 2.0 3.5 5.5 mT 5

Release point*2 N pole BRPN − −5.5 −3.5 −2.0 mT 5

S pole BHYSS B

HYSS = BOPS − BRPS − 1.0 − mT 5

Hysteresis width*3 N pole BHYSN B

HYSN = |BOPN − BRPN| − 1.0 − mT 5

1. 4 BOP = 7.0 mT typ.

Table 14

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

S pole BOPS − 5.0 7.0 8.5 mT 5

Operation point*1 N pole BOPN − −8.5 −7.0 −5.0 mT 5

S pole BRPS − 3.7 5.2 7.2 mT 5

Release point*2 N pole BRPN − −7.2 −5.2 −3.7 mT 5

S pole BHYSS B

HYSS = BOPS − BRPS − 1.8 − mT 5

Hysteresis width*3 N pole BHYSN B

HYSN = |BOPN − BRPN| − 1.8 − mT 5

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

Rev.1.2_00 S-5716 Series

Seiko Instruments Inc. 9

2. Product with S pole detection

2. 1 BOP = 1.8 mT typ.

Table 15

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

Operation point*1 S pole BOPS − 0.9 1.8 2.7 mT 5

Release point*2 S pole BRPS − 0.3 1.2 2.2 mT 5

Hysteresis width*3 S pole BHYSS B

HYSS = BOPS − BRPS − 0.6 − mT 5

2. 2 BOP = 3.0 mT typ.

Table 16

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

Operation point*1 S pole BOPS − 1.4 3.0 4.0 mT 5

Release point*2 S pole BRPS − 1.1 2.2 3.7 mT 5

Hysteresis width*3 S pole BHYSS B

HYSS = BOPS − BRPS − 0.8 − mT 5

2. 3 BOP = 4.5 mT typ.

Table 17

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

Operation point*1 S pole BOPS − 2.5 4.5 6.0 mT 5

Release point*2 S pole BRPS − 2.0 3.5 5.5 mT 5

Hysteresis width*3 S pole BHYSS B

HYSS = BOPS − BRPS − 1.0 − mT 5

2. 4 BOP = 7.0 mT typ.

Table 18

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

Operation point*1 S pole BOPS − 5.0 7.0 8.5 mT 5

Release point*2 S pole BRPS − 3.7 5.2 7.2 mT 5

Hysteresis width*3 S pole BHYSS B

HYSS = BOPS − BRPS − 1.8 − mT 5

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

S-5716 Series Rev.1.2_00

Seiko Instruments Inc.

3. Product with N pole detection

3. 1 BOP = 1.8 mT typ.

Table 19

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

Operation point*1 N pole BOPN − −2.7 −1.8 −0.9 mT 5

Release point*2 N pole BRPN − −2.2 −1.2 −0.3 mT 5

Hysteresis width*3 N pole BHYSN B

HYSN = |BOPN − BRPN| − 0.6 − mT 5

3. 2 BOP = 3.0 mT typ.

Table 20

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

Operation point*1 N pole BOPN − −4.0 −3.0 −1.4 mT 5

Release point*2 N pole BRPN − −3.7 −2.2 −1.1 mT 5

Hysteresis width*3 N pole BHYSN B

HYSN = |BOPN − BRPN| − 0.8 − mT 5

3. 3 BOP = 4.5 mT typ.

Table 21

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

Operation point*1 N pole BOPN − −6.0 −4.5 −2.5 mT 5

Release point*2 N pole BRPN − −5.5 −3.5 −2.0 mT 5

Hysteresis width*3 N pole BHYSN B

HYSN = |BOPN − BRPN| − 1.0 − mT 5

3. 4 BOP = 7.0 mT typ.

Table 22

(Ta = +25°C, VDD = 5.0 V, VSS = 0 V unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test Circuit

Operation point*1 N pole BOPN − −8.5 −7.0 −5.0 mT 5

Release point*2 N pole BRPN − −7.2 −5.2 −3.7 mT 5

Hysteresis width*3 N pole BHYSN B

HYSN = |BOPN − BRPN| − 1.8 − mT 5

*1. B

OPN, BOPS: Operation points

BOPN and BOPS are the values of magnetic flux density when the output voltage (VOUT) is inverted after the magnetic flux

density applied to the S-5716 Series by the magnet (N pole or S pole) is increased (the magnet is moved closer).

Even when the magnetic flux density exceeds BOPN or BOPS, VOUT retains the status.

*2. B

RPN, BRPS: Release points

BRPN and BRPS are the values of magnetic flux density when the output voltage (VOUT) is inverted after the magnetic flux

density applied to the S-5716 Series by the magnet (N pole or S pole) is decreased (the magnet is moved further away).

Even when the magnetic flux density falls below BRPN or BRPS, VOUT retains the status.

*3. B

HYSN, BHYSS: Hysteresis widths

BHYSN and BHYSS are the difference between BOPN and BRPN, and BOPS and BRPS, respectively.

Remark The unit of magnetic density mT can be converted by using the formula 1 mT = 10 Gauss.

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

Rev.1.2_00 S-5716 Series

Seiko Instruments Inc. 11

 Test Circuits

S-5716

Series

VDD

VSS

OUT A

Figure 7 Test Circuit 2

S-5716

Series

VDD

VSS

OUT A

Figure 8 Test Circuit 3

S-5716

Series

VDD

VSS

OUT

100 kΩ

*1. Resistor (R) is unnecessary for the CMOS output product.

Figure 6 Test Circuit 1

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

S-5716 Series Rev.1.2_00

Seiko Instruments Inc.

S-5716

Series

VDD

VSS

OUT A

Figure 9 Test Circuit 4

S-5716

Series

VDD

VSS

OUT

100 kΩ

*1. Resistor (R) is unnecessary for the CMOS output product.

Figure 10 Test Circuit 5

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

Rev.1.2_00 S-5716 Series

Seiko Instruments Inc. 13

 Standard Circuit

S-5716

Series

VDD

VSS

OUT

100 k

0.1

*1. Resistor (R) is unnecessary for the CMOS output product.

Figure 11

Caution The above connection diagram and constant will not guarantee successful operation. Perform

thorough evaluation using the actual application to set the constant.

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

S-5716 Series Rev.1.2_00

Seiko Instruments Inc.

 Operation

1. Direction of applied magnetic flux

The S-5716 Series detects the flux density which is vertical to the marking surface.

In product with both poles detection, the output voltage (VOUT) is inverted when the S pole or N pole is moved closer to

the marking surface.

In product with S pole detection, the output voltage (VOUT) is inverted when the S pole is moved closer to the marking

surface.

In product with N pole detection, the output voltage (VOUT) is inverted when the N pole is moved closer to the marking

surface.

Figure 12 and Figure 13 show the direction in which magnetic flux is being applied.

1. 1 SOT-23-3 1. 2 SNT-4A

Marking surface

Figure 12 Figure 13

2. Position of Hall sensor

Figure 14 and Figure 15 show the position of Hall sensor.

The center of this Hall sensor is located in the area indicated by a circle, which is in the center of a package as

described below.

The following also shows the distance (typ. value) between the marking surface and the chip surface of a package.

2. 1 SOT-23-3 2. 2 SNT-4A

Top view

2 3

0.7 mm (typ.)

The center of Hall sensor;

in this φ 0.3 mm

Top view

0.16 mm (typ.)

The center of Hall sensor;

in this φ 0.3 mm

Figure 14 Figure 15

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

Rev.1.2_00 S-5716 Series

Seiko Instruments Inc. 15

3. Basic operation

The S-5716 Series changes the output voltage level (VOUT) according to the level of the magnetic flux density (N pole

or S pole) applied by a magnet.

The following explains the operation when the magnetism detection logic is active "L".

3. 1 Product with detection of both poles

When the magnetic flux density vertical to the marking surface exceeds BOPN or BOPS after the S pole or N pole of a

magnet is moved closer to the marking surface of the S-5716 Series, VOUT changes from "H" to "L". When the S

pole or N pole of a magnet is moved further away from the marking surface of the S-5716 Series and the magnetic

flux density is lower than BRPN or BRPS, VOUT changes from "L" to "H".

Figure 16 shows the relationship between the magnetic flux density and VOUT.

OUT

OPN

RPN

RPS

OPS

HYSS

HYSN

Flux density (B)

N pole S pole

Figure 16

3. 2 Product with detection of S pole

When the magnetic flux density vertical to the marking surface exceeds BOPS after the S pole of a magnet is moved

closer to the marking surface of the S-5716 Series, VOUT changes from "H" to "L". When the S pole of a magnet is

moved further away from the marking surface of the S-5716 Series and the magnetic flux density is lower than

BRPS, VOUT changes from "L" to "H".

Figure 17 shows the relationship between the magnetic flux density and VOUT.

OUT

0 B

RPS

OPS

HYSS

Flux density (B)

N pole S pole

Figure 17

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

S-5716 Series Rev.1.2_00

Seiko Instruments Inc.

3. 3 Product with detection of N pole

When the magnetic flux density vertical to the marking surface exceeds BOPN after the N pole of a magnet is moved

closer to the marking surface of the S-5716 Series, VOUT changes from "H" to "L". When the N pole of a magnet is

moved further away from the marking surface of the S-5716 Series and the magnetic flux density is lower than

BRPN, VOUT changes from "L" to "H".

Figure 18 shows the relationship between the magnetic flux density and VOUT.

OUT

OPN

RPN

HYSN

Flux density (B)

N pole S pole

Figure 18

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

Rev.1.2_00 S-5716 Series

Seiko Instruments Inc. 17

 Precautions

• If the impedance of the power supply is high, the IC may malfunction due to a supply voltage drop caused by feed-

through current. Take care with the pattern wiring to ensure that the impedance of the power supply is low.

• Note that the IC may malfunction if the power supply voltage rapidly changes.

• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic

protection circuit.

• Large stress on this IC may affect on the magnetic characteristics. Avoid large stress which is caused by bend and

distortion during mounting the IC on a board or handle after mounting.

• SII claims no responsibility for any disputes arising out of or in connection with any infringement by products including

this IC of patents owned by a third party.

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

S-5716 Series Rev.1.2_00

Seiko Instruments Inc.

 Marking Specifications

1. SOT-23-3

(1) to (3): Product code (Refer to Product name vs. Product code.)

(4): Lot number

Top view

(1) (2) (3) (4)

Product name vs. Product code

1. 1 Nch open-drain output product

Product Code

Product Name (1) (2) (3)

S-5716ANDL0-M3T1U X 3 C

S-5716ANDL1-M3T1U X 2 D

S-5716ANDL2-M3T1U X 3 E

S-5716ANSL1-M3T1U X 2 E

S-5716ANSL2-M3T1U X 3 G

1. 2 CMOS output product

Product Code

Product Name (1) (2) (3)

S-5716ACDL0-M3T1U X 3 B

S-5716ACDL1-M3T1U X 2 F

S-5716ACDL2-M3T1U X 3 D

S-5716ACDL3-M3T1U X 3 J

S-5716ACDH0-M3T1U X 3 H

S-5716ACDH1-M3T1U X 3 A

S-5716ACDH2-M3T1U X 3 I

S-5716ACSL1-M3T1U X 2 G

S-5716ACSL2-M3T1U X 3 F

LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC

Rev.1.2_00 S-5716 Series

Seiko Instruments Inc. 19

2. SNT-4A

(1) to (3): Product code (Refer to Product name vs. Product code.)

Top view

(1) (2) (3)

Product name vs. Product code

2. 1 Nch open-drain output product

Product Code

Product Name (1) (2) (3)

S-5716ANDL0-I4T1U X 3 C

S-5716ANDL1-I4T1U X 2 D

S-5716ANDL2-I4T1U X 3 E

S-5716ANSL1-I4T1U X 2 E

S-5716ANSL2-I4T1U X 3 G

2. 2 CMOS output product

Product Code

Product Name (1) (2) (3)

S-5716ACDL0-I4T1U X 3 B

S-5716ACDL1-I4T1U X 2 F

S-5716ACDL2-I4T1U X 3 D

S-5716ACDH0-I4T1U X 3 H

S-5716ACDH1-I4T1U X 3 A

S-5716ACDH2-I4T1U X 3 I

S-5716ACSL1-I4T1U X 2 G

S-5716ACSL2-I4T1U X 3 F

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

No. MP003-C-P-SD-1.0

MP003-C-P-SD-1.0

SOT233-C-PKG Dimensions

2.9±0.2

0.95±0.1

1.9±0.2

+0.1

-0.06

0.16

0.4±0.1

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

No. MP003-C-C-SD-2.0

MP003-C-C-SD-2.0

SOT233-C-Carrier Tape

1.4±0.2

0.23±0.1

4.0±0.1

2.0±0.1

4.0±0.1

ø1.5 +0.1

-0

ø1.0

3.2±0.2

Feed direction

+0.25

-0

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

QTY. 3,000

No. MP003-Z-R-SD-1.0

MP003-Z-R-SD-1.0

SOT233-C-Reel

ø13±0.2

12.5max.

9.2±0.5

Enlarged drawing in the central part

1.2±0.04

0.65

0.2±0.05

0.48±0.02

0.08

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

SNT-4A-A-PKG Dimensions

PF004-A-P-SD-4.0

No. PF004-A-P-SD-4.0

+0.05

-0.02

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

PF004-A-C-SD-1.0

SNT-4A-A-Carrier Tape

Feed direction

4.0±0.1

2.0±0.05

4.0±0.1

ø1.5 +0.1

-0

ø0.5

1.45±0.1 0.65±0.05

0.25±0.05

5°

No. PF004-A-C-SD-1.0

+0.1

-0

12.5max.

9.0±0.3

ø13±0.2

(60°) (60°)

QTY. 5,000

No. PF004-A-R-SD-1.0

PF004-A-R-SD-1.0

Enlarged drawing in the central part

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

SNT-4A-A-Reel

No.

TITLE

SCALE

UNIT mm

SNT-4A-A-Land Recommendation

Seiko Instruments Inc.

PF004-A-L-SD-4.0

No. PF004-A-L-SD-4.0

0.3

0.35

0.52

1.16

0.52

Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package.

2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm

or less from the land pattern surface.

3. Match the mask aperture size and aperture position with the land pattern.

4. Refer to "SNT Package User's Guide" for details.

1. (0.25 mm min. / 0.30 mm typ.)

2. (1.10 mm ~ 1.20 mm)

0.03 mm

1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.).

2. Do not widen the land pattern to the center of the package (1.10 mm to 1.20 mm).

※1. 䇋⊼ᛣ⛞Ⲭ῵ᓣⱘᆑᑺ(0.25 mm min. / 0.30 mm typ.)Ǆ

※2. 䇋䇋࣓৥ᇕ㺙Ё䯈ᠽሩ⛞Ⲭ῵ᓣ (1.10 mm ~ 1.20 mm)Ǆ

⊼ᛣ1. 䇋࣓೼󰶆㛖ൟᇕ㺙ⱘϟ䴶ࠋϱ㔥ǃ⛞䫵Ǆ

2. ೼ᇕ㺙ϟǃᏗ㒓Ϟⱘ䰏⛞㝰ᑺ (Ң⛞Ⲭ῵ᓣ㸼䴶䍋) 䇋᥻ࠊ೼0.03 mmҹϟǄ

3. ᥽㝰ⱘᓔষሎᇌᓔষԡ㕂䇋Ϣ⛞Ⲭ῵ᓣᇍ唤Ǆ

4. 䆺㒚ݙᆍ䇋খ䯙 "SNTᇕ㺙ⱘᑨ⫼ᣛ"Ǆ

www.sii-ic.com

• The information described herein is subject to change without notice.

• Seiko Instruments Inc. is not responsible for any problems caused by circuits or diagrams described herein

whose related industrial properties, patents, or other rights belong to third parties. The application circuit

examples explain typical applications of the products, and do not guarantee the success of any specific

mass-production design.

• When the products described herein are regulated products subject to the Wassenaar Arrangement or other

agreements, they may not be exported without authorization from the appropriate governmental authority.

• Use of the information described herein for other purposes and/or reproduction or copying without the

express permission of Seiko Instruments Inc. is strictly prohibited.

• The products described herein cannot be used as part of any device or equipment affecting the human

body, such as exercise equipment, medical equipment, security systems, gas equipment, vehicle equipment,

in-vehicle equipment, aviation equipment, aerospace equipment, and nuclear-related equipment, without prior

written permission of Seiko Instruments Inc.

• The products described herein are not designed to be radiation-proof.

• Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, the

failure or malfunction of semiconductor products may occur. The user of these products should therefore

give thorough consideration to safety design, including redundancy, fire-prevention measures, and

malfunction prevention, to prevent any accidents, fires, or community damage that may ensue.