Analog signal converters CC range Serial data converters ILPH range Content Analogue Signal Converters CC-range Benefits and advantages .................................................................................................... 5/ 4 Application ......................................................................................................................... 5/ 5 Approvals and marks ......................................................................................................... 5/ 5 Ordering details Analog standard signal converters CC-E/STD, CC-E x/x ................................................................................................. CC-E I/I ...................................................................................................................... CC-U/STD ................................................................................................................. CC-U/STDR ............................................................................................................... Temperature signal converters for RTD sensors CC-E/RTD.................................................................................................................. CC-U/RTD ................................................................................................................. CC-U/RTDR ............................................................................................................... Temperature signal converters for thermocouples CC-E/TC .................................................................................................................... CC-U/TC.................................................................................................................... CC-U/TCR ................................................................................................................. Measuring converters for currents (E/I) and (U/I) and voltages (U/V) CC-E/I ........................................................................................................................ CC-E IAC / ILPO.......................................................................................................... CC-U/I ....................................................................................................................... CC-U/V ...................................................................................................................... Accessories .................................................................................................................. Technical data CC-E/STD, CC-E x/x, CC-E/RTD, CC-E/TC ................................................................ CC-E I/I ........................................................................................................................ CC-U/STD, CC-U/RTD, CC-U/TC ............................................................................... CC-U/STDR, CC-U/RTDR, CC-U/TCR ........................................................................ CC-E/I, CC-E IAC / ILPO ............................................................................................... CC-U/I, CC-U/V ........................................................................................................... Technical diagrams............................................................................................................. Connection diagramms ...................................................................................................... Dimensional drawings ........................................................................................................ 5/ 5/ 5/ 5/ 6 7 8 9 5/10 5/11 5/12 5/13 5/14 5/15 5/16 5/17 5/18 5/19 5/20 5/21 5/22 5/23 5/24 5/25 5/26 5/27 5/27 5/27 Serial data converters ILPH range Uses ................................................................................................................................... 5/30 Selection table .................................................................................................................... 5/31 Ordering details .................................................................................................................. 5/32 Technical data .................................................................................................................... 5/32 5/3 2CDC110004C0207 5 Analog signal converters CC range 2CDC 285 001 F0b05 Benefits and advantages Product range for analog signal processing CC-U range CC-E range 8 different standard signal outputs on one device Input and output side universally configurable Also available with 2 threshold relay outputs Adjustment and operating elements on the front side Safe operation by electrical 3-way isolation Plug-in connecting terminals, unambiguously and clearly marked Conversion, measurement and separation of standard signals signals of RTD sensors (PT10, PT100, PT1000) thermocouple signals RMS values of currents and voltages Universally configurable devices and single-function devices Adjustment and operating elements on the front side Safe operation by electrical 3-way isolation Unambiguous and clear connecting terminal markings Conversion, measurement and separation of standard signals (0-5 V, 0-10 V, 0-20 mA, 4-20 mA) temperature signals of RTD sensors (PT 100) thermocouple signals (types J and K) current measurement signals (0-5 A, 0-20 A AC/DC) Characteristics of single-function devices No adjustment or balancing necessary. Characteristics The required input and output ranges can be configured for all devices by means of directly accessible DIP switches positioned on the side. Due to the wide input range of the gain and offset stages all input signals between the minimum and the maximum input value can be universally converted to all common output signals. Devices for DC or AC (50/60 Hz) supply available. Characteristics of universal devices The required input and output ranges can be configured by means of directly accessible DIP switches positioned on the side Gain adjustment of 5 % by means of an adjustment potentiometer on the front-side Offset adjustment of 5 % by means of adjustment potentiometers on the front-side 2CDC 283 016 F0b03 5 5/4 2CDC110004C0207 Analog signal converters CC range Application, Approvals and marks Applications for analog signal processing and correct solution using CC-E and CC-U converters 0-10 V Nearly every process includes a control system that receives data by means of analog signals and then evaluates the data and sets the respective parameters correspondingly. 0-10 V Controller e.g. AC500 1. Analog signal converter (e.g. CC-E or CC-U) 2. Analog signal converter (e.g. CC-E or CC-U) When transmitting analog signals numerous problems may arise which can disturb or even block an ideal behavior of the process. 100 m 0-20 mA 100 m 4-20 mA Actuator Below we have listed some processing problems together with the respective solutions to solve these problems: Measuring sensor 2CDC 282 013 F0206 Signal conversion Sometimes the available signals cannot be processed by the controller or the actuator. In this case, signal converters are required to convert the input signal (or different input signals) to the desired output signal. Signal amplification Signal separation If long lines or high burdens have to be operated, it may be necessary to amplify the signal. CC analog signal converters require only low input power and provide high output power. Protection against overvoltage The increased use of micro-electronics make controls much more sensitive against overvoltages, resulting from lightning discharges or switching processes. Suppression diodes are incorporated in the input of the CC analog signal converters which enable the converters to arrest overvoltages with low energy level (resulting from switching processes) by themselves. The products furthermore provide electrical isolation between input, output and supply circuit for protection of the controller connected to the output. Thus, there are no restrictions for the converter's position on the line, i.e. it can be used for signal refreshing at the end of the line (low input power) or for signal amplification at the beginning of the line (high output power). Protection against ground loops Signal filtering If components are used which refer to ground, the measuring signals can be falsified by a so-called ground loop. In this case, Particularly on long lines or in rough industrial environments the signals certain parts of the signal are transmitted via earth and not via the are exposed to high electromagnetic interferences. The frequency of analog transmission line, thus causing incorrect evaluation of the the coupled interference signals may be in the range of the common signal. The electrical isolation between the input and the output mains frequency (50 Hz) or even much higher (in case of frequency disconnects these ground loops and thus enables correct signal converters). According to the specific requirements, analog signal transmission. converters are available which provide reliable suppression of those interferences by means of an input low-pass filter. A UL 1604 (Class I, Div 2, hazardous locations), CAN/CSA C22.2 No.213 K CB scheme E CCC CC-U/V CC-E/I UL 508, CAN/CSA C22.2 No.14 CC-U/I CC-U/TCR A Approvals CC-E IAC/ILPO CC-U/TC CC-E/TC CC-U/RTD CC-U/RTDR CC-E/RTD CC-U/STD CC-E I/I CC-E/STD CC-U/STDR existing existing for some devices pending Marks a CE b C-Tick 5/5 2CDC110004C0207 5 Analog standard signal converters CC-E/STD, CC-E x/x Ordering details 2 universally configurable devices (type CC-E/STD) 2x10 single-function devices "Plug and Work", no adjustment of single-function devices required Wiring instruction DIP switch settings (universal devices) Input 0...5 V Burden R 500 CC-E/STD supply 2CDC 282 006 F0206 Burden R 1.0 k 0...10 V 0...20 mA 2CDC 281 014 F0t04 4...20 mA Type Switch 1 2 3 4 5 6 7 8 0...5 V 0...10 V 0...20 mA 4...20 mA 0...5 V 0...10 V 0...20 mA 4...20 mA 0...5 V 0...10 V 0...20 mA 4...20 mA 0...5 V 0...10 V 0...20 mA 4...20 mA Output signal Order code Pack. unit piece 0-5 V, 0-10 V 0-20 mA, 4-20 mA 1SVR 011 700 R00001) 1 Legend ON OFF Price 1 piece Supply voltage: 24 V DC universal CC-E/STD CC-E V/V 5 Input signal Output 2CDC 282 002 F0204 2CDC 282 001 F0204 2CDC 281 001 F0t03 CC-E/STD analog signal converter with 3-way electrical isolation 0-5 V, 0-10 V 0-20 mA, 4-20 mA single-function U: green LED supply voltage Gain adjustment Offset adjustment DIP switch for input and output configuration (only available on universal devices) CC-E V/V CC-E V/I CC-E V/I 0-10 V 0-10 V 0-20 mA 4-20 mA 1SVR 011 710 R2100 1SVR 011 711 R1600 1SVR 011 712 R1700 1 1 1 CC-E I/V CC-E I/I CC-E I/I 0-20 mA 0-10 V 0-20 mA 4-20 mA 1SVR 011 713 R1000 1SVR 011 714 R1100 1SVR 011 715 R1200 1 1 1 CC-E I/V CC-E I/I CC-E I/I 4-20 mA 0-10 V 0-20 mA 4-20 mA 1SVR 011 716 R1300 1SVR 011 717 R1400 1SVR 011 718 R2500 1 1 1 CC-E V/V -10...+10 V -10...+10 V 1SVR 011 719 R2600 1 0-5 V, 0-10 V 0-20 mA, 4-20 mA 1SVR 011 705 R2100 1 Supply voltage: 110-240 V AC universal CC-E/STD 0-5 V, 0-10 V 0-20 mA, 4-20 mA single-function B 1604 Class I, Div.2 (universal device) CC-E V/V CC-E V/I CC-E V/I 0-10 V 0-10 V 0-20 mA 4-20 mA 1SVR 011 720 R2300 1SVR 011 721 R1000 1SVR 011 722 R1100 1 1 1 CC-E I/V CC-E I/I CC-E I/I 0-20 mA 0-10 V 0-20 mA 4-20 mA 1SVR 011 723 R1200 1SVR 011 724 R1300 1SVR 011 725 R1400 1 1 1 CC-E I/V CC-E I/I CC-E I/I 4-20 mA 0-10 V 0-20 mA 4-20 mA 1SVR 011 726 R1500 1SVR 011 727 R1600 1SVR 011 728 R2700 1 1 1 CC-E V/V -10...+10 V -10...+10 V 1SVR 011 729 R2000 1 1) 5/6 2CDC110004C0207 * Technical data ....................................................................... 5/21 * Dimensional drawings ............................................................ 5/27 Current/current isolator CC-E I/I-1 and CC-E I/I-2 2CDC 281 001 F0b06 Ordering details Loop-powered current/current isolator without external power supply for analog current signals of 0-20 mA and 4-20 mA Electrical isolation between input and output Very low internal voltage drop 2.5 V Available with one or two independent channels Width only 18 mm (1 and 2 channels) Wiring instructions CC-E I/I-1 Channel 1 input 0-20 mA or 4-20 mA Channel 1 IN OUT C F D E output 0-20 mA or 4-20 mA UL 2CDC 281 041 F0b03 IN OUT 100 RL 500 2CDC 282 003 F0205 CC-E I/I-1 CC-E I/I-2 Channel 1 input 0-20 mA or 4-20 mA Channel 1 OUT IN C F D E output 0-20 mA or 4-20 mA UL IN OUT 100 RL 500 Channel 2 input 0-20 mA or 4-20 mA OUT IN A H B G output 0-20 mA or 4-20 mA UL IN OUT 100 RL 500 Type 2CDC 282 004 F0205 CC-E I/I-2 Chanel 2 5 Input signal Output signal Order code Pack. unit piece 0-20 mA, 4-20 mA 0-20 mA, 4-20 mA 1SVR 010 200 R1600 1 0-20 mA, 4-20 mA 0-20 mA, 4-20 mA 1SVR 010 201 R0300 1 Price 1 piece 1 channel CC-E I/I-1 2 channel CC-E I/I-2 * Technical data ....................................................................... 5/21 * Dimensional drawings ............................................................ 5/27 5/7 2CDC110004C0207 Analog standard signal converter CC-U/STD Ordering details 2CDC 281 002 F0t03 CC-U/STD universal signal converter with 3-way electrical isolation More than 120 configurations possible Configurable output signal response on input voltage signal interruption (low fail safe / high fail safe) Adjustment and operating elements on the front Short-circuit proof signal outputs Plug-in connecting terminals for inputs, outputs and supply Very fast signal transmission enables use in control systems Adjustment range Continuously variable adjustment range: Example : Input configuration: 0...10 V Output configuration: -5...5 V CC-U/STD Wiring instruction OUT [%] 100 Gain "gain-coarse" und "gain-fine" 90 80 Plug-in terminals 70 60 Gain: Coarse adjustment 50 40 G Pot. U: green LED supply voltage H 30 Burden R 4.7 k Burden R 600 Marker label 20 supply 10 IN [%] 10 20 30 40 50 60 70 80 90 100 Offset remote poti SW1.6 = +22.5 % SW1.4 = +100 % 2CDC 282 018 F0203 Offset adjustment J 2CDC 282 015 F0206 Gain: Fine adjustment + 2.5 V SW1.5 = +50 % 5 DIP switch settings 0 A...D 4...5 0...1 7...9 3...4 0 5...7 2 7...9 2...4 0 3...4 3...4 B...F 0 5...7 3...4 2 4...5 A...D 2...4 4...5 0...1 4...5 4...2 B...F 4...6 - Coarse Type 0 C 5 1 8 3 0 6 2 8 3 0 3 3 D 0 6 4 2 5 B 3 4 1 4 3 D 5 - Output *) Detection of input voltage signal interruptions: If the input signal circuit is interrupted, the output signal changes to the adjusted minimum value (low fail safe) or maximum value (high fail safe). If "No fail safe" is configured, input signal interruptions are not detected. Type CC-U/STD 2CDC110004C0207 Legend ON OFF no influence Rated supply voltage Order code Pack. unit pieces 24-48 V DC 110-240 V AC 1SVR 040 000 R1700 1SVR 040 001 R0400 1 1 * Accessories ........................................................................... 5/20 * Technical data ....................................................................... 5/21 5/8 Switch 2 1 2 3 4 5 6 0...5 V 0...10 V 1...5 V 2...10 V -10...+10 V -5...+5 V -10...0 V -5...0 V 0...6.66 V -10...+3.33 V -5...+1.66 V 0...8 V 0...4 V -10...-2 V -5...-1 V 1.25...6.25 V -7.5...+2.5 V -3.75...+1.25 V 1.66...8.33 V -6.66...+6.66 V -3.33...+3.33 V -8...0 V -4...0 V 0...1 mA 0...20 mA 4...20 mA 0...10 mA 0...0.5 mA 0...13.33 mA 0...666 A 0...16 mA 0...800 A 0...8 mA 0...400 A 2.5...12.5 mA 125...625 A 3.33...16.66 mA 166...833 A 0.2...1 mA 2...10 mA 100...500 A 2CDC 282 003 F0204 Gain 2CDC 282 020 F0203 Switch 1 1 2 3 4 5 6 7 8 2CDC 282 019 F0203 Input Potentiometer 0...50 mV 0...100 mV 0...250 mV 0...500 mV 0...1 V 0...2.5 V 0...5 V 0...10 V 1...5 V 2... 10 V -10...+10 V 0...125 mV 0...8 V -22.5...+22.5 mV -11...+11 V 2.5...7.5 V 3.33...9.99 V 10...0 V 100...0 mV 0...1 mA 0...20 mA 4...20 mA 10...50 mA 20...4 mA 20...0 mA -0.45...+0.45 mA -55...+55 mA High fail safe *) Low faile safe *) No fail safe *) Price 1 piece * Dimensional drawings ............................................................ 5/27 Analog standard signal converter CC-U/STDR with relay output 2CDC 281 003 F0t03 Ordering details CC-U/STDR universal signal converter for standard signals, with 2 threshold relay outputs and with 3-way electrical isolation Standard signal converter with 7 setting ranges 2 threshold relay outputs with one c/o contact each (threshold and respective hysteresis can be adjusted independently from each other) Open-circuit or closed-circuit principle configurable by means of a DIP switch 2 yellow LEDs for clear status indication of the output relays Plug-in connecting terminals for inputs, outputs and supply Wiring instruction Function diagrams Value R1 Closed-circuit principle R1 Threshold value R1 Hysteresis CC-U/STDR Threshold Hysteresis Temperature Value R2 Threshold value for R1 supply Hysteresis for R1 2CDC 282 044 F0203 Plug-in connecting terminals 2CDC 282 016 F0206 R2 Hysteresis R2 Threshold value 11-14 R1 11-12 21-24 R2 21-22 Threshold value for R2 R1: yellow LED Relay 1 energized Marker label R1 Threshold value Switch 1 2 3 4 5 6 0...0 V 0...5 V 0...1 V -10...+10 V 1...5 V 0...20 mA 4...20 mA Output Closed-circuit principle Open-circuit principle R1 Hysteresis Temperature R2 Hysteresis Legend ON OFF no influence 2CDC 282 046 F0203 R2: yellow LED Relay 2 energized Open-circuit principle Input 2CDC 282 003 F0204 U: green LED supply voltage DIP switch settings 2CDC 282 005 F0204 Hysteresis for R2 R2 Threshold value 11-14 R1 11-12 21-24 R2 21-22 Switching points Switching points of the output relay depending on the input range, configuration open-circuit principle IN [%] va lu e 100 Ac tu al 90 Threshold value R1 2-100 % of input range 80 Hysteresis R1 5-50 % of threshold value R1 70 60 50 40 Threshold value R2 2-100 % of input range 30 20 Hysteresis R2 5-50 % of threshold value R2 0 Type CC-U/STDR R1 11-14 11-12 R2 21-24 21-22 OUT Rated supply voltage Order code Pack. unit pieces 24-48 V DC 110-240 V AC 1SVR 040 010 R0000 1SVR 040 011 R2500 1 1 * Accessories ........................................................................... 5/20 * Technical diagrams ............................................................... 5/27 2CDC 282 021 F0203 10 Price 1 piece * Technical data ........................................................................ 5/21 * Dimensional drawings ............................................................ 5/27 5/9 2CDC110004C0207 5 Temperature signal converter for RTD sensors CC-E/RTD CC-E/RTD temperature signal converter for RTD sensors, linearized with 3-way electrical isolation 2 universally configurable devices (type CC-E/RTD) 2x12 single-function devices "Plug and Work", no adjustment of single-function devices required Temperature signal converter for PT100 sensors 2- or 3-wire connection DIP switch settings (universal devices) Wiring instruction Input 0...100 C 0...300 C G H Burden R 500 J Gain adjustment Offset adjustment supply U: green LED supply voltage DIP switch for input and output configuration (only available on universal devices) 0...500 C 2CDC 282 007 F0206 CC-E/RTD Burden R 1.0 k -50...+50 C -50...+250 C -50...+450 C Output Switch 1 2 3 4 5 6 0...10 V 0-20 mA 4-20 mA 0-10 V 0-20 mA 4-20 mA 0-10 V 0-20 mA 4-20 mA 0-10 V 0-20 mA 4-20 mA 0-10 V 0-20 mA 4-20 mA 0-10 V 0-20 mA 4-20 mA High fail safe Low fail safe Type Output signal Order code Pack. unit piece refer to table 0-10 V, 0-20 mA, 4-20 mA 1SVR 011 701 R25001) 1 CC-E RTD/V CC-E RTD/I CC-E RTD/I PT100 0...100 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 730 R2500 1SVR 011 731 R1200 1SVR 011 732 R1300 1 1 1 CC-E RTD/V CC-E RTD/I CC-E RTD/I PT100 -50...+50 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 733 R1400 1SVR 011 734 R1500 1SVR 011 735 R1600 1 1 1 CC-E RTD/V CC-E RTD/I CC-E RTD/I PT100 0...300 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 736 R1700 1SVR 011 737 R1000 1SVR 011 738 R2100 1 1 1 CC-E RTD/V CC-E RTD/I CC-E RTD/I PT100 -50...+250 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 739 R2200 1SVR 011 740 R0700 1SVR 011 741 R2400 1 1 1 refer to table 0-10 V, 0-20 mA, 4-20 mA 1SVR 011 706 R2200 1 CC-E RTD/V CC-E RTD/I CC-E RTD/I PT100 0...100 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 788 R2400 1SVR 011 789 R2500 1SVR 011 790 R2200 1 1 1 CC-E RTD/V CC-E RTD/I CC-E RTD/I PT100 -50...+50 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 791 R1700 1SVR 011 792 R1000 1SVR 011 793 R1100 1 1 1 CC-E RTD/V CC-E RTD/I CC-E RTD/I PT100 0...300 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 794 R1200 1SVR 011 795 R1300 1SVR 011 796 R1400 1 1 1 CC-E RTD/V CC-E RTD/I CC-E RTD/I PT100 -50...+250 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 797 R1500 1SVR 011 798 R2600 1SVR 011 799 R2700 1 1 1 Input signal Legend ON OFF no influence 2CDC 282 003 F0204 2CDC 282 006 F0208 2CDC 281 004 F0t03 Ordering details Price 1 piece Supply voltage: 24 V DC universal CC-E/RTD 5 single-function Supply voltage: 110-240 V AC universal CC-E/RTD single-function B 1604 Class I, Div.2 (universal device) 1) 5/10 2CDC110004C0207 * Technical data ....................................................................... 5/21 * Dimensional drawings ............................................................ 5/27 Temperature signal converter for RTD sensors CC-U/RTD CC-U/RTD universal signal converter for PT10, PT100, PT1000 temperature sensors (acc. to IEC 751 and JIS C 16041), linearized with 3-way electrical isolation Configurable output signal response on Wiring instruction input signal interruption (low / high fail safe) Adjustment and operating elements on G the front-side J Short-circuit proof signal outputs H Plug-in connecting terminals for inputs, outputs and supply 2- or 3-wire connection 1) Burden R 4.7 k Burden R 600 supply Japanese standard 2CDC 282 017 F0206 2CDC 281 005 F0t03 Ordering details Characteristic curves Resistance of PT10, PT100 and PT1000 sensors depending on the temperature CC-U/RTD PT1000 Plug-in connecting terminals Gain: Fine adjustment Offset adjustment U: green LED supply voltage Resistance [] Gain: Coarse adjustment PT100 Marker label 2CDC 282 022 F0203 PT10 Temperature [C] *) Detection of input signal interruptions: If the input signal circuit is interrupted, the output signal changes to the adjusted minimum value (low fail safe) or maximum value (high fail safe). Type CC-U/RTD Rated supply voltage Order code Pack. unit pieces 24-48 V DC 110-240 V AC 1SVR 040 002 R0500 1SVR 040 003 R0600 1 1 * Accessories ........................................................................... 5/20 * Technical data ....................................................................... 5/21 Legend ON OFF no influence 2CDC 282 003 F0204 Gain Coarse F E D C B A 9 8 F E B A 9 8 3 2 1 0 8 3 2 1 0 0 - 2CDC 282 023 F0203 Switch 1 Switch 2 Input Range 1 2 3 4 5 6 1 2 3 4 5 6 0...500 C 0...550 C 0...600 C 0...650 C PT10 0...700 C 0...750 C 0...800 C 0...850 C 0...50 C 0...60 C 0...70 C 0...80 C 0...90 C PT100 0...100 C 0...200 C 0...300 C 0...400 C 0...500 C 0...10 C 0...20 C 0...30 C PT1000 0...40 C 0...50 C 0...60 C Low fail safe *) High fail safe *) Type Switch 3 1 2 3 4 5 6 0...5 V 0...10 V 1...5 V 2...10 V -10...+10 V -5...+5 V -10...0 V -5...0 V 0...6.66 V -10...+3.33 V -5...+1.66 V 0...8 V 0...4 V -10...-2 V -5...-1 V 1.25...6.25 V -7.5...+2.5 V -3.75...+1.25 V 1.66...8.33 V -6.66...+6.66 V -3.33...+3.33 V -8...0 V -4...0 V 0...1 mA 0...20 mA 4...20 mA 0...10 mA 0...0.5 mA 0...13.33 mA 0...666 A 0...16 mA 0...800 A 0...8 mA 0...400 A 2.5...12.5 mA 125...625 A 3.33...16.66 mA 166...833 A 0.2...1 mA 2...10 mA 100...500 A 2CDC 282 024 F0203 Output DIP switch settings Price 1 piece * Dimensional drawings ............................................................ 5/27 5/11 2CDC110004C0207 5 Temperature signal converter for RTD sensors CC-U/RTDR with relay output 2CDC 281 006 F0t03 Ordering details CC-U/RTDR universal signal converter for temperature and resistance signals, with 2 threshold relay outputs and 3-way electrical isolation Temperature signal converter for PT100 signals (5 ranges up to 800 C) and variable resistances from 0-380 2 threshold relay outputs with one c/o contact each (threshold and respective hysteresis can be adjusted independently from each other) Open-circuit or closed-circuit principle configurable by means of a DIP switch 2 yellow LEDs for clear status indication of the output relays Plug-in connecting terminals for inputs, outputs and supply 2- or 3-wire connection Wiring instruction Function diagrams Value R1 CC-U/RTDR Threshold J R1 Threshold value R1 Hysteresis Hysteresis Temperature B (22) C (21) A (24) R2 H Threshold value for R1 Closed-circuit principle R2 Hysteresis R2 Threshold value 2CDC 282 045 F0203 Plug-in connecting terminals E (12) F (11) D (14) R1 Value R2 Hysteresis for R1 K Threshold value for R2 2CDC 282 044 F0203 G M supply 11-14 R1 11-12 21-24 R2 21-22 Hysteresis for R2 U: green LED supply voltage DIP switch settings Open-circuit principle R1 Threshold value R2: yellow LED Relay 2 energized R1 Hysteresis 0...100 C 0...200 C 0...400 C 0...600 C 0...800 C Output Closed-circuit principle Open-circuit principle Legend ON OFF no influence 2CDC 282 046 F0203 R2 Hysteresis 2CDC 282 003 F0204 Marker label Temperature 2CDC 282 007 F0204 R1: yellow LED Relay 1 energized 5 Switch 1 2 3 4 5 6 Input PT100 R2 Threshold value 11-14 R1 11-12 21-24 R2 21-22 Switching points Switching points of the output relay depending on the input range, configuration open-circuit principle IN [%] 100 90 Ac 700 Threshold value R1 2-100 % of input range 600 80 Hysteresis R1 5-50 % of threshold value R1 70 500 60 50 400 300 40 Threshold value R2 2-100 % of input range 200 30 20 100 Hysteresis R2 5-50 % of threshold value R2 10 0 50 100 150 200 250 300 350 400 Resistance [] Type CC-U/RTDR R1 11-14 11-12 R2 21-24 21-22 Rated supply voltage Order code Pack. unit pieces 24-48 V DC 110-240 V AC 1SVR 040 012 R2600 1SVR 040 013 R2700 1 1 * Accessories ........................................................................... 5/20 * Technical diagrams ............................................................... 5/27 5/12 2CDC110004C0207 OUT 2CDC 282 025 F0203 Temperature [C] tu al va l ue 800 Price 1 piece * Technical data ........................................................................ 5/21 * Dimensional drawings ............................................................ 5/27 Temperature signal converter for thermocouples CC-E/TC 2CDC 281 007 F0t03 Ordering details CC-E/TC analog signal converter for thermocouple signals of the types J and K with 3-way electrical isolation 2 universally configurable devices (type CC-E/TC) 2x6 single-function devices "Plug and Work", no adjustment of single-function devices required Wiring instruction DIP switch settings (universal devices) supply Gain adjustment TC-J: 0...600 C TC-K: 0...1000 C Output Switch 1 2 3 4 5 6 0...10 V 0...20 mA 4...20 mA 0...10 V 0...20 mA 4...20 mA High fail safe Low fail safe Legend ON OFF no influence 2CDC 282 003 F0204 CC-E/TC 2CDC 282 008 F0206 Input Burden R 500 2CDC 282 007 F0208 Burden R 1.0 k Offset adjustment U: green LED supply voltage DIP switch for input and output configuration (only available on universal devices) Type Input signal Output signal Order code Pack. unit piece 0-10 V, 0-20 mA, 4-20 mA 1SVR 011 702 R26001) 1 Price 1 piece Supply voltage: 24 V DC universal CC-E/TC thermocouple types J and K 5 single-function CC-E TC/V CC-E TC/I CC-E TC/I type J 0...600 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 750 R0100 1SVR 011 751 R2600 1SVR 011 752 R2700 1 1 1 CC-E TC/V CC-E TC/I CC-E TC/I type K 0...1000 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 753 R2000 1SVR 011 754 R2100 1SVR 011 755 R2200 1 1 1 0-10 V, 0-20 mA, 4-20 mA 1SVR 011 707 R2300 1 Supply voltage: 110-240 V AC universal CC-E/TC thermocouple types J and K single-function B 1604 Class I, Div.2 (universal device) CC-E TC/V CC-E TC/I CC-E TC/I type J 0...600 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 760 R0300 1SVR 011 761 R2000 1SVR 011 762 R2100 1 1 1 CC-E TC/V CC-E TC/I CC-E TC/I type K 0...1000 C 0-10 V 0-20 mA 4-20 mA 1SVR 011 763 R2200 1SVR 011 764 R2300 1SVR 011 765 R2400 1 1 1 1) * Technical data ....................................................................... 5/21 * Dimensional drawings ............................................................ 5/27 5/13 2CDC110004C0207 Temperature signal converter for thermocouples CC-U/TC Ordering details Temperature signal converter for thermocouples of the types K, J, T, S, E, N, R, B Continuously adjustable voltage signal input 0-10 mV and 0-50 mV Differential temperature meas. possible 1) Configurable output signal response on input signal interruption (low fail safe / high fail safe) Adjustment and operating elements on the front-side Short-circuit proof signal outputs Plug-in connecting terminals for inputs, outputs and supply Wiring instruction Burden R 4.7 k Burden R 600 supply 2CDC 282 018 F0206 2CDC 281 008 F0t03 CC-U/TC universal signal converter for thermocouples with 3-way electrical isolation 1) Plug-in connecting terminals without cold-junction compensation: switch SW2.2 = OFF DIP switch settings Gain: Fine adjustment Switch 1 Switch 2 Input Range 1 2 3 4 5 6 1 2 3 4 5 6 0-100...900 C K 0-250...1350 C J 0-100...750 C 0-100...400 C T -150-0...400 C S 0-250...1550 C 0-100...700 C E 0-200...1000 C 0-100...650 C N 0-200...1300 C 0-250...1350 C R 0-450...1700 C B 0-700...1750 C 0-2...10 mV mV 0-10...50 mV Low fail safe *) High fail safe *) Offset adjustment *) Detection of input signal interruptions: If the input signal circuit is interrupted, the output signal changes to the adjusted minimum value (low fail safe) or maximum value (high fail safe). Characteristic curves Thermocouple voltages depending on the temperature 80000 Typ E 75000 Typ J 70000 65000 60000 Typ K 55000 50000 Typ N 45000 40000 35000 30000 Typ R 25000 Typ T 20000 Typ S 15000 Typ B Legend ON OFF no influence 2CDC 282 003 F0204 10000 5000 0 -5000 -10000 1800 1750 1700 1650 1600 1550 1500 1450 1400 1350 1300 1250 1200 1150 1100 1050 1000 950 900 850 800 750 700 650 600 550 500 450 400 350 300 250 200 150 0 50 100 -50 -100 -150 -200 -250 -15000 Temperatur [C] Type CC-U/TC Rated supply voltage Order code Pack. unit pieces 24-48 V DC 110-240 V AC 1SVR 040 004 R0700 1SVR 040 005 R0000 1 1 * Accessories ........................................................................... 5/20 * Technical data ....................................................................... 5/21 5/14 2CDC110004C0207 2CDC 282 026 F0103 5 0...5 V 0...10 V 1...5 V 2...10 V -10...+10 V -5...+5 V -10...0 V -5...0 V 0...6.66 V -10...+3.33 V -5...+1.66 V 0...8 V 0...4 V -10...-2 V -5...-1 V 1.25...6.25 V -7.5...+2.5 V -3.75...+1.25 V 1.66...8.33 V -6.66...+6.66 V -3.33...+3.33 V -8...0 V -4...0 V 0...1 mA 0...20 mA 4...20 mA 0...10 mA 0...0.5 mA 0...13.33 mA 0...666 A 0...16 mA 0...800 A 0...8 mA 0...400 A 2.5...12.5 mA 125...625 A 3.33...16.66 mA 166...833 A 0.2...1 mA 2...10 mA 100...500 A 2CDC 282 017 F0208 Marker label Switch 3 1 2 3 4 5 6 Output Thermoelement-Spannung [V] U: green LED supply voltage Type 2CDC 282 010 F0204 Gain: Coarse adjustment 2CDC 282 019 F0206 CC-U/TC Price 1 piece * Dimensional drawings ............................................................ 5/27 Temperature signal converter for thermocouples CC-U/TCR with relay output 2CDC 281 009 F0t03 Ordering details CC-U/TCR universal signal converter for thermocouples, with 2 threshold relay outputs and 3-way electrical isolation Temperature signal converter for thermocouples of the types K, J, T, S 2 threshold relay outputs with one change-over contact each (threshold and respective hysteresis can be adjusted independently from each other) Open-circuit or closed-circuit principle configurable by means of a DIP switch 2 yellow LEDs for clear status indication of the output relays Plug-in connecting terminals for inputs, outputs and supply Wiring instruction Function diagrams Value R1 Closed-circuit principle R1 Threshold value R1 Hysteresis CC-U/TCR Threshold Hysteresis Temperature 2CDC 282 044 F0203 R2 Hysteresis 2CDC 282 020 F0206 R2 Threshold value Plug-in connecting terminals Value R2 Threshold value for R1 Hysteresis for R1 supply 11-14 R1 11-12 21-24 R2 21-22 Threshold value for R2 Marker label R1 Threshold value R1 Hysteresis Switch Input Type Range 1 2 3 4 5 6 0...240 C J 0...480 C 0...1200 C 0...250 C K 0...500 C 0...1350 C -150...+120 C 0...220 C T 0...400 C 0...210 C 0...380 C S 0...860 C 0...1550 C Output Closed-circuit principle Open-circuit principle Temperature R2 Hysteresis 2CDC 282 046 F0203 R1: yellow LED Relay 1 energized Open-circuit principle R2 Threshold value 11-14 R1 11-12 21-24 R2 21-22 2CDC 282 003 F0204 R2: yellow LED Relay 2 energized DIP switch settings 2CDC 282 004 F0204 Hysteresis for R2 U: green LED supply voltage Legend ON OFF no influence Switching points Switching points of the output relay depending on the input range, configuration open-circuit principle IN [%] 100 7000 Threshold value R1 = 1000 C Typ J 6500 6000 Thermocouple voltage [V] 5500 5000 Typ K 4500 Release hysteresis 4000 3500 Threshold value R2 = 400 C 3000 2500 Typ T 2000 Release hysteresis 1500 Typ S 1000 500 0 0 OUT -1000 Temperature [C] Type CC-U/TCR R2 21-24 21-22 Rated supply voltage Order code Pack. unit pieces 24-48 V DC 110-240 V AC 1SVR 040 014 R2000 1SVR 040 015 R2100 1 1 * Accessories ........................................................................... 5/20 * Technical diagrams ............................................................... 5/27 R1 1825 1725 1625 1525 1425 1325 1225 1125 925 1025 825 725 625 525 425 325 225 25 125 -75 -175 -275 -1500 11-14 11-12 2CDC 282 027 F0203 -500 Price 1 piece * Technical data ........................................................................ 5/21 * Dimensional drawings ............................................................ 5/27 5/15 2CDC110004C0207 5 Measuring converter for sinusoidal and DC currents CC-E/I CC-E/I measuring converter for current signals 0-5 A, 0-20 A, AC/DC with 3-way electrical isolation 2 universally configurable devices (type CC-E/I) 2x6 single-function devices "Plug and Work", no adjustment of single-function devices required Wiring instruction 20 A I 5A H A V J IN OUT I G CC-E/I K - + C - D + F - Burden R 1.0 k Burden R 500 M supply + 2CDC 282 008 F0208 2CDC 281 010 F0t03 Ordering details Gain adjustment Input range selection DIP switch settings (universal devices) Select input range by terminals DIP switch for input and output configuration (only available on universal devices) Connected lines Used terminals Terminal marking Input range 20 A Connected lines Used terminals Terminal marking Input I - DC I - AC I - DC I - AC I - DC I - AC Output Switch 1 2 3 4 5 6 0...10 V 0...20 mA 4...20 mA Legend ON OFF 2CDC 282 002 F0204 Input range 5 A 2CDC 282 005 F0208 U: green LED supply voltage 2CDC 282 011 F0204 Offset adjustment 5 Type Output signal Order code Pack. unit pieces 0-10 V, 0-20 mA, 4-20 mA 1SVR 011 703 R27001) 1 CC-E IAC/V CC-E IAC/I 0-5 A, 0-20 A, AC CC-E IAC/I 0-10 V 0-20 mA 4-20 mA 1SVR 011 770 R0500 1SVR 011 771 R2200 1SVR 011 772 R2300 1 1 1 CC-E IDC/V CC-E IDC/I 0-5 A, 0-20 A, DC CC-E IDC/I 0-10 V 0-20 mA 4-20 mA 1SVR 011 773 R2400 1SVR 011 774 R2500 1SVR 011 775 R2600 1 1 1 0-10 V, 0-20 mA, 4-20 mA 1SVR 011 708 R0400 1 CC-E IAC/V CC-E IAC/I 0-5 A, 0-20 A, AC CC-E IAC/I 0-10 V 0-20 mA 4-20 mA 1SVR 011 780 R1100 1SVR 011 781 R0600 1SVR 011 782 R0700 1 1 1 CC-E IDC/V CC-E IDC/I 0-5 A, 0-20 A, DC CC-E IDC/I 0-10 V 0-20 mA 4-20 mA 1SVR 011 783 R0000 1SVR 011 784 R0100 1SVR 011 785 R1100 1 1 1 Input signal Price 1 piece Supply voltage: 24 V DC universal CC-E/I 0-5 A, 0-20 A, AC/DC single-function Supply voltage: 110-240 V AC universal CC-E/I 0-5 A, 0-20 A, AC/DC single-function B 1604 Class I, Div.2 (universal device) 1) 5/16 2CDC110004C0207 * Technical data ....................................................................... 5/21 * Dimensional drawings ............................................................ 5/27 Measuring converter for sinusoidal currents CC-E IAC/ILPO 2CDC 281 018 F0t04 Ordering details CC-E IAC/ILPO measuring converter without auxiliary power for sinusoidal currents 0-1 A, 0-5 A, output 4-20 mA Measuring converter for sinusoidal currents (0-1 A, 0-5 A) Measuring range selection by front-face sliding switch 4-20 mA output current in proportion to input current no additional power supply required Wiring instruction CC-E IAC/ILPO Gain adjustment 2CDC 282 010 F0b06 Offset adjustment Selection of measuring range 5 Type CC-E IAC/ILPO Input signal Order code Pack. unit pieces 0-1 A, 0-5 A, AC 1SVR 010 203 R0500 1 * Technical data ....................................................................... 5/21 Price 1 piece * Dimensional drawings ............................................................ 5/27 5/17 2CDC110004C0207 Measuring converter for current RMS values CC-U/I 2CDC 281 012 F0t03 Ordering details CC-U/I universal measuring converter for RMS values of 0-1 A and 0-5 A, with 3-way electrical isolation RMS converter for current signals up to 1 A and up to 5 A of any wave form (DC, DC with superimposed AC components, pure sinusoidal, triangular, phase-angle controlled, etc. in a measuring range of 0-600 Hz) Adjustment and operating elements on the front Short-circuit proof signal outputs Plug-in connecting terminals for inputs, outputs and supply DIP switch settings Output Plug-in connecting terminals Gain adjustment supply Offset adjustment U: green LED supply voltage Marker label Input range selection Select input range by terminals Input range 1 A 5 J 5A H 1A G C Input range 5 A Connected lines Used terminals Terminal marking J 5A H 1A G C 2CDC 282 033 F0203 Connected lines Used terminals Terminal marking 2CDC 282 029 F0203 Burden R 600 2CDC 282 021 F0206 Burden R 4.7 k CC-U/I Switch 1 2 3 4 5 6 0...5 V 0...10 V 1...5 V 2...10 V -10...+10 V -5...+5 V -10...0 V -5...0 V 0...6.66 V -10...+3.33 V -5...+1.66 V 0...8 V 0...4 V -10...-2 V -5...-1 V 1.25...6.25 V -7.5...+2.5 V -3.75...+1.25 V 1.66...8.33 V -6.66...+6.66 V -3.33...+3.33 V -8...0 V -4...0 V 0...1 mA 0...20 mA 4...20 mA 0...10 mA 0...0.5 mA 0...13.33 mA 0...666 A 0...16 mA 0...800 A 0...8 mA 0...400 A 2.5...12.5 mA 125...625 A 3.33...16.66 mA 166...833 A 0.2...1 mA 2...10 mA 100...500 A 2CDC 282 003 F0204 Wiring instruction Legend ON OFF no influence Example of application RMS measurement and conversion of a current signal Gain 15 % IN [%] I(t) [A] 5 4 3 2 1 resulting RMS value 0 OUT [%] t -1 0 50 100 -2 2CDC 282 028 F0203 Offset 20 % -3 -4 -5 Type CC-U/I Rated supply voltage Order code Pack. unit pieces 24-48 V DC 110-240 V AC 1SVR 040 006 R0100 1SVR 040 007 R0200 1 1 * Accessories ........................................................................... 5/20 * Technical data ....................................................................... 5/21 5/18 2CDC110004C0207 Price 1 piece * Dimensional drawings ............................................................ 5/27 Measuring converter for voltage RMS values CC-U/V CC-U/V universal measuring converter for RMS values of 0-600 V, with 3-way electrical isolation RMS converter for voltage signals up to 600 V of any wave form (DC, DC with superimposed AC components, pure sinusoidal, triangular, phase-angle controlled, etc. in a measuring range of 0-600 Hz) Adjustment and operating elements on the front Short-circuit proof signal outputs Plug-in connecting terminals for inputs, outputs and supply Wiring instruction DIP switch settings Output CC-U/V Burden R 600 Input voltage range selection supply 2CDC 282 022 F0206 Burden R 4.7 k Plug-in connecting terminals Gain adjustment Offset adjustment U: green LED supply voltage Marker label Switch position 1 2 3 4 5 6 7 8 2CDC 282 012 F0204 Input range selection Selecting input range by front-face rotary switch 0...100 V 0...150 V 0...250 V 0...300 V 0...400 V 0...450 V 0...550 V 0...600 V Switch 1 2 3 4 5 6 0...5 V 0...10 V 1...5 V 2...10 V -10...+10 V -5...+5 V -10...0 V -5...0 V 0...6.66 V -10...+3.33 V -5...+1.66 V 0...8 V 0...4 V -10...-2 V -5...-1 V 1.25...6.25 V -7.5...+2.5 V -3.75...+1.25 V 1.66...8.33 V -6.66...+6.66 V -3.33...+3.33 V -8...0 V -4...0 V 0...1 mA 0...20 mA 4...20 mA 0...10 mA 0...0.5 mA 0...13.33 mA 0...666 A 0...16 mA 0...800 A 0...8 mA 0...400 A 2.5...12.5 mA 125...625 A 3.33...16.66 mA 166...833 A 0.2...1 mA 2...10 mA 100...500 A 5 Legend ON OFF no influence 2CDC 282 003 F0204 2CDC 282 029 F0203 2CDC 281 013 F0t03 Ordering details Example of application RMS measurement and conversion of a phase-angle controlled voltage signal L1 = 230 V INUeff [V] U(t) [V] Gain 15 % resulting RMS value OUT [%] 0 0 50 100 Offset 20 % -300 operating angle Type CC-U/V Rated supply voltage Order code Pack. unit pieces 24-48 V DC 110-240 V AC 1SVR 040 008 R1300 1SVR 040 009 R1400 1 1 * Accessories ........................................................................... 5/20 * Technical data ....................................................................... 5/21 2CDC 282 030 F0203 300 Price 1 piece * Dimensional drawings ............................................................ 5/27 5/19 2CDC110004C0207 Analog signal converters Accessories for CC-U range Ordering details 10 .394" 22,5 .886" 62,5 2.46" 2CDC 252 187 F0005 4,5 .177" 11,5 .453" Accessories Adapter for screw mounting Type ADP.01 60 2.36" for type Width in mm Order code Pack. unit pieces CC-U 22.5 1SVR 430 029 R0100 1 for type Order code Pack. unit pieces CC-U 1SVR 366 017 R0100 10 Price 1 piece Weight 1 piece g / oz 18.4/0.65 20 .787" MAR.01 Marker label 2CDC 252 186 F0005 3A11 8 .315" ADP.01 Type 7 .275" 3,5 .138" 68,5 2.70 " 22,5 .886" 2CDC 252 185 F0005 MAR.01 Price 1 piece Weight 1 piece g / oz 0.19/0.007 Sealable transparent cover Type COV.01 for type Width in mm Order code Pack. unit pieces CC-U 22.5 1SVR 430 005 R0100 1 Price 1 piece Weight 1 piece g / oz 5.2/0.18 front-to-back size 107 5 Sealable cover COV.01 5/20 2CDC110004C0207 Analog signal converters CC-E/STD, CC-E x/x, CC-E/RTD, CC-E/TC Technical data Type Input circuits - Analog inputs Input signal Rated input range Current Voltage Standard signals 0...5 V / 0...20 mA / 0...10 V / 4...20 mA -10...+10 V +55 mA 11 V - Limitation of input signals Influence of line resistance Gain adjustment range Offset adjustment range Input impedance Suppression at 50 Hz Common-mode rejection 50 1 M - Output circuits - Analog outputs Output signal Output burden Accuracy 1) Residual ripple Response time Transmission frequency Reaction to input circuit interruption D-F, A-C Supply circuits Supply voltage Supply voltage tolerance Power consumption -50...+500 C < 0.01 %/ 5 % (universal devices) 5 % (universal devices) 100 dB TC.K: 0...1000 C, TC.J: 0...600 C < 0.5 % / 100 > 35 dB AC versions 110-240 V AC - 50/60 Hz -15...+10 % 1.5 VA typ. 5 U: green LED operation / storage 0...+60 C / -20...+80 C 500 ppm/C IP20 ventilation slots on top and bottom DIN rail (IEC/EN 60715), snap-on mounting 0.2-4 mm2 (24-12 AWG) 0.2-2.5 mm2 (24-14 AWG) 7 mm (0.28 inch) 0.5 Nm (4.4 lb.in) rigid fine-strand with(out) wire end ferrule Stripping length Tightening torque Electromagnetic compatibility Interference immunity electrostatic discharge (ESD) electromagnetic field (HF radiation resistance) fast transients (Burst) powerful impulses (Surge) HF line emission Interference emission PT100 DC versions 24 V DC -15...+15 % 1.5 W typ. Indication of operational states Rated control supply voltage US Electrical connection Wire size Temperature sensors CC-E/TC Thermocouples (IEC 584-1 and 2) TC.K, TC.J Current Voltage 0-20 mA, 4-20 mA 0-5 V, 0-10 V 500 1.0 K 0.5 % of full-scale < 0.5 % 200 s 10 ms 2 kHz 80 Hz 2 Hz (up to -3 dB) High fail safe: Output voltage > 115 % of measuring range 2) Low fail safe: Output voltage < -0.6 V, output current = 0 mA K-M General data Ambient temperature range Temperature coefficient Degree of protection (DIN 40050) Mounting position Mounting CC-E/RTD 3) CC-E/STD J-G-H EN 61000-6-2 Level 3 (6 kV / 8 kV) IEC/EN 61000-4-2 10 V/m IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 EN 61000-6-4 Isolation data Test voltage between all isolated circuits Rated insulation voltage Level 3 (2 kV / 5 kH) 2 kV / 1 kV 10 V Class B - 2.5 kV AC - - 1) includes: non-linearity, factory setting, drift of temperature, supply voltage and output load Only -/RTD and -/TC: Single-function devices respond with Low fail safe to input signal interruptions 3) When connecting a 2-wire sensor, the terminals J and H have to be jumpered. 2) * Approvals ...................................... 5/3 5/21 2CDC110004C0207 Analog signal converter CC-E I/I-1, CC-E I/I-2 Technical data Type Input circuits - Analog inputs Input current IIN Min. input current Max. input current Input voltage UIN Input voltage drop Ui Max. input voltage CC-E I/I Current 0-20 mA, 4-20 mA < 100 A 50 mA1) (VIN < 18 V) < 2.5 V + (IIN x RL) < 2.5 V (20 mA, RL = 0 ) 18 V1) (IIN < 50 mA) Output circuits Output current IOUT Output load RL Output voltage UOUT Residual ripple Response time (0-100 %) 0-20 mA, 4-20 mA 0-500 IOUT x RL < 20 mVpp (500 , 20 mA) < 15 ms (0-500 , 20 mA), < 5 ms (500 , 20 mA, 25 C) 0.1 % of full-scale (20 mA) 0.05 % / 100 , -0.1 % / 100 (25 C) Accuracy Load influence (0-500 ) General data Width of the enclosure Weight 5 1 channel 2 channel Mounting position Degree of protection Ambient temperature range Temperature coefficient Mounting Electrical connection Wire size enclosure / terminals operation / storage rigid fine-strand with(out) wire end ferrule Stripping length Tightening torque Standards Product standard Low Voltage Directive EMC Directive Electromagnetic compatibility Interference immunity electrostatic discharge (ESD) electromagnetic field (HF radiation resistance) fast transients (Burst) powerful impulses (Surge) HF line emission magnetisches Feld Interference emission Radiated noise Operational reliability (EN 68-2-6) Mechanical resistance (EN 68-2-6) Environmental testing (IEC 68-2-30 Db) 0.2-4 mm2 (24-12 AWG) 0.2-2.5 mm2 (24-14 AWG) 7 mm (0,28 inch) 0.5 Nm (4.4 lb.in) EN 50178 2006/95/EC 2004/108/EC EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-8 EN 55011 Isolation data Insulation voltage input / output Insulation voltage between channels Pollution category Overvoltage category 1) 18 mm approx. 0.037 kg (0.082 lb) approx. 0.044 kg (0.097 lb) any IP20 / IP20 -25...+60 C / -40...+85 C < 50 ppm / C DIN rail (IEC/EN 60715) EN 61000-6-2 Level 3 (6 kV / 8 kV) 10 V/m Level 3 (2 kV / 5 kH) 2 kV / 1 kV 10 V 30 A/m EN 61000-6-4 Class B 4g 10 g 24 h cycle, 55 C, 93 % rel., 96 h 500 Veff / 50 Hz 5 kVeff / 50 Hz (device with 2 channels) 2 II The input parameters have to be limited to the indicated maximum values. * Approvals ...................................... 5/3 5/22 2CDC110004C0207 Analog signal converters CC-U/STD, CC-U/RTD, CC-U/TC Technical data Type Input circuits - Analog inputs CC-U/RTD 3) CC-U/STD J-G-H Input signal Current 0-20 mA 4-20 mA 10-50 mA 0-1 mA Limitation of input signals Rated input range 55 mA - Influence of line resistance Gain adjustment range (universal devices) Offset adjustment range (universal devices) Input impedance without detection of input signal interruption with detection of input signal interruption Suppression at 50 Hz Common-mode rejection Output circuits - Analog outputs Output signal Output burden Accuracy 1) Residual ripple Response time Transmission frequency Supply circuits Rated supply voltage Supply voltage range Supply voltage tolerance Rated frequency Power consumption D-F, A-C PotentioVoltage meter 0-100 mV 470 0-1 V 1 M 2) 0-5 V 1-5 V 0-10 V 2-10 V 10 V 11 V - - 0.945 mV 110 mA 22 V -137.5...+62.5 % for different ranges 51 6 M 3 G 51 3.5 M 9.5 G - Temperature sensors PT10, PT100, PT1000 (IEL 751 and JICC 1604) Max. temperature adjustable: 6-60 C for PT1000 50-500 C for PT100 500-850 C for PT10 0.015 C/ CC-U/TC Thermocouples (IEC 584-1 and 2) TC.K TC.J TC.T TC.S TC.E TC.N TC.R TC.B refer to temperature specs. of individual thermocouples < 0.01 % / 100 see DIP switch settings 5% 120 dB 10 % > 40 dB 105 dB Current Voltage 0-20 mA, 4-20 mA 0-5 V, 1-5 V, 0-10 V, 2-10 V, 10 V 600 4.7 K 0.1 % of full-scale 0.2 % of full-scale 0.1 % of full-scale < 0.15 % 200 s 10 ms 200 ms 1 kHz 80 Hz 2 Hz (to -3 dB) 5 K-M 24-48 V DC 110-240 V AC 24-48 V DC / 24 V AC 110-240 V AC / 100-300 V DC DC: -15...+15 % AC: -15...+10 % 0 Hz or 50/60 Hz 2 W at 24 V DC 4.5 VA at 230 V AC Indication of operational states Supply voltage General data Ambient temperature range Temperature coefficient U: green LED operation / storage -20...+60 C / -40...+80 C 150 ppm/C Mounting position Mounting 250 ppm/C 200 ppm/C at min. offset 400 ppm/C at max. offset any DIN rail (IEC/EN 60715), snap-on mounting / screw mounting with adapter Electrical connection Wire size rigid fine-strand with(out) wire end ferrule plug-connector with screw terminals 0.2-2.5 mm2 (24-12 AWG) plug-connector with screw terminals 0.2-2.5 mm2 (24-12 AWG) Stripping length 7 mm (0.28 inch) Tightening torque 0.4 Nm (3.5 ib.in) Electromagnetic compatibility Interference immunity electrostatic discharge (ESD) electromagnetic field (HF radiation resistance) fast transients (Burst) powerful impulses (Surge) HF line emission Interference emission IEC/EN 61000-4-2 IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 EN 61000-6-4 EN 61000-6-2 Level 3 (6 kV / 8 kV) 10 V/m Level 3 (2 kV / 5 kH) 2 kV / 1 kV 10 V Class B Isolation data Isolation test (between all isolated circuits) 1.5 kV Test voltage (between all isolated circuits) 1.5 kV / 50 Hz 1) includes: non-linearity, factory setting, drift of temperature, supply voltage and output load Detection of an input signal break (fail safe) and resistance > 10 k results in a linearity of 0,2 %. 3) When connecting a 2-wire sensor, the terminals J and H have to be jumpered. 2) * Approvals ...................................... 5/3 5/23 2CDC110004C0207 Analog signal converters with relay output CC-U/STDR, CC-U/RTDR, CC-U/TCR Technical data Type Input circuits - Analog inputs CC-U/STDR J-H Measuring signal / input range Current Voltage Output circuits - Relay outputs E-D-F, B-C-A Rated switching voltage AC12 (resistive) 230 V Rated switching current AC15 (inductive) 230 V DC12 (resistive) 24 V DC13 (inductive) 24 V AC rating Utilization category (UL 508) (Control Circuit Rating Code) max. rated operational voltage max. continuous thermal current at B 300 max. making/breaking apparent power at B 300 Minimum switching voltage Minimum switching current / power Response time Mechanical lifetime Electrical lifetime at AC12, 230 V, 4 A 5 B 300 300 V AC 5A 3600/360 VA 12 V 10 mA / 0.6 VA (W) 10 ms 30 x 106 switching cycles 0.1 Mio. switching cycles K-M 24-48 V DC 110-240 V AC 24-48 V DC / 24 V AC 110-240 V AC / 100-300 V DC DC: -15...+15 % AC: -15...+10 % 0 Hz or 50/60 Hz 2 W at 24 V DC 4.5 VA at 230 V AC General data Ambient temperature range Temperature coefficient Mounting position Mounting U: green LED R1: yellow LED / R2: yellow LED operation / storage rigid fine-strand with(out) wire end ferrule Stripping length Tightening torque Electromagnetic compatibility Interference immunity electrostatic discharge (ESD) electromagnetic field (HF radiation resistance) fast transients (Burst) powerful impulses (Surge) HF line emission Interference emission -20...+60 C / -40...+80 C 300 ppm/C any DIN rail (IEC/EN 60715), snap-on mounting / screw mounting with adapter plug-connector with screw terminals 0.2-2.5 mm2 (24-12 AWG) plug-connector with screw terminals 0.2-2.5 mm2 (24-12 AWG) 7 mm (0.28 inch) 0.4 Nm (3.5 ib.in) IEC/EN 61000-4-2 IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 EN 61000-6-4 Isolation data Insulation voltage (between all isolated circuits) Test voltage (between all isolated circuits) 1) CC-U/TCR Thermocouples (IEC 584-1 and 2) TC.K, TC.J TC.T, TC.S Relay, 2 c/o contacts 250 V AC 4A 3A 4A 2A Indication of operational states Supply voltage 1st / 2nd output relay energized Electrical connection Wire size Temperature sensors 0-20 mA 0-1 V / 1-5 V PT100 4-20 mA 0-10 / 10 V approx. 50 approx. 1,5 M 2-100 % of selected input range 5-50 % of threshold 0.5 % of full-scale Input resistance Adjustable threshold Adjustable hysteresis Repeat accuracy (constant parameters) Supply circuits Rated supply voltage Supply voltage range Supply voltage tolerance Rated frequency Power consumption CC-U/RTDR 1) EN 61000-6-2 Level 3 (6 kV / 8 kV) 10 V/m Level 3 (2 kV / 5 kH) 2 kV / 1 kV 10 V Class B 2.5 kV 2.5 kV When connecting a 2-wire sensor, the terminals J and H have to be jumpered. * Approvals ...................................... 5/3 5/24 2CDC110004C0207 Analog signal converters CC-E/I, CC-E IAC/ILPO Technical data Type CC-E/I J-G-H Input circuits - Analog inputs AC current 0-5 A / 0-20 A Rated input range Measuring frequency Overload capacity of inputs input range 1 input range 2 Gain adjustment range Offset adjustment range Input impedance / resistance Output circuits - Analog outputs Accuracy 1) Offset adjustment range Gain adjustment range Residual ripple Response time Transmission frequency Reaction to input circuit interruption Supply circuits Supply voltage Supply voltage tolerance Power consumption K-M Indication of operational states Supply voltage Electrical connection Wire size DC current 0-5 A / 0-20 A 10 x INom (50 A) for max. 1 s 10 x INom (200 A) for max. 1 s 5 % (universal devices) 5 % (universal devices) 5A : 65 m 20 A : 2.5 m F-E passive current output in proportion to input current 0-20 mA / 4-20 mA 0-10 V 4-20 mA 12 V DC: 150 , 500 1.0 24 V DC: 750 30 V DC: 1050 2 % of full-scale 5 % (universal device) 5% 5 % (universal device) 20 % < 0.5 % 0.5 s 0.6 s DC or 50/60 Hz AC: 50/60 Hz Low fail safe: output voltage < 200 mA, output current < 400 A Output signal Output burden / load General data Ambient temperature range Temperature coefficient Degree of protection (DIN 40050) Mounting position Mounting operation / storage D-F Current A-C Voltage DC versions 24 V DC -15...+15 % typ 1.5 W AC versions 110-240 V AC 50/60 Hz -15...+10 % typ 1.5 VA 5 - 0...+60 C / -20...+80 C 500 ppm/C -20...+60 C / -40...+80 C 300 ppm/C IP20 ventilation slots on top and bottom DIN rail (IEC/EN 60715), snap-on mounting 0.2-4 mm (24-12 AWG) 0.2-2.5 mm (24-14 AWG) 7 mm (0.28 inch) 0.5 Nm (4.4 lb.in) Stripping length Tightening torque EN 61000-6-2 Level 3 (6 kV / 8 kV) IEC/EN 61000-4-2 10 V/m IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 EN 61000-6-4 Isolation data Test voltage (between all isolated circuits) Rated insulation voltage 1) 12-30 V DC - U: green LED rigid fine-strand with(out) wire end ferrule Electromagnetic compatibility Interference immunity electrostatic discharge (ESD) electromagnetic field (HF radiation resistance) fast transients (Burst) powerful impulses (Surge) HF line emission Interference emission CC-E IAC/ILPO C-D 2 meas. ranges selectable 0-1 A / 0-5 A / sinusoidal 50/60 Hz 10 x INom (50 A) for max. 2 s 10 x INom (200 A) for max. 2 s 5 m Level 3 (2 kV / 5 kH) 2 kV / 1 kV 10 V Class B 2.5 kV AC - 250 V AC includes: non-linearity, factory setting, drift of temperature, supply voltage and output load * Approvals ...................................... 5/3 5/25 2CDC110004C0207 Analog signal converters CC-U/I, CC-U/V Technical data Type Input circuits - Analog inputs J-G-H Rated input range CC-U/V any voltage signals, RMS measurement 0-100 V, 0-200 V 0-300 V, 0-400 V 0-500 V, 0-600 V 0-1 A 0-5 A Measuring frequency Overload capacity of inputs 0-600 Hz input range 1 input range 2 Gain adjustment range Offset adjustment range Input impedance / resistance Output circuits - Analog outputs Output signal Output load Accuracy1) Temperature coefficient Residual ripple Response time 10 x INom (10 A) for max. 2 s 10 x INom (50 A) for max. 2 s 1A: 60 m, 5 A: 12 m D-F, A-C > 800 k Current 0-20 mA, 4-20 mA 600 Voltage 0-5 V, 1-5 V, 0-10 V, 2-10 V, 10 V 4.7 K 0.5 % of full-scale 250 ppm/C max. 300 ppm/C max. < 0.15 % 150 ms K-M 24-48 V DC 24-48 V DC, 24 V AC DC: -15...+15 % 2 W at 24 V DC 110-240 V AC 110-240 V AC, 100-300 V DC AC: -15...+10 % 0 Hz or 50/60 Hz 4.5 VA at 230 V AC Indication of operational states Supply voltage General data Ambient temperature range Mounting position Mounting Electrical connection Wire size U: green LED operation / storage rigid fine-strand with(out) wire end ferrule Stripping length Tightening torque -20...+60 C / -40...+80 C any DIN rail (IEC/EN 60715), snap-on mounting / screw mounting with adapter plug-connector with screw terminals 0.2-2.5 mm2 (24-12 AWG) plug-connector with screw terminals 0.2-2.5 mm2 (24-12 AWG) 7 mm (0.28 inch) 0.4 Nm (3.5 lb.in) Standards Product standard Low Voltage directive EMC directive RoHS directive Electromagnetic compatibility Interference immunity electrostatic discharge (ESD) electromagnetic field (HF radiation resistance) fast transients (Burst) powerful impulses (Surge) HF line emission Interference emission 2006/95/EG 2004/108/EG 2002/95/EG IEC/EN 61000-4-2 IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 EN 61000-6-4 EN 61000-6-2 Level 3 (6 kV / 8 kV) 10 V/m Level 3 (2 kV / 5 kH) 2 kV / 1 kV 10 V Class B Isolation data Insulation voltage (between all isolated circuits) Test voltage (between all isolated circuits) 1) 15 % 20 % Supply circuits Rated supply voltage Supply voltage range Supply voltage tolerance Rated frequency Power consumption 5 CC-U/I any current signals, RMS measurement 1.5 kV 1.5 kV / 50 Hz includes: non-linearity, factory setting, drift of temperature, supply voltage and output load * Approvals ...................................... 5/3 5/26 2CDC110004C0207 Analog signal converters CC-E, CC-U Technical diagr., Connection diagr., Dimensional drawings Technical diagrams Connection diagram CC-U/x Width 22.5 mm (0.89 in) Load limit curves CC-U/xxR Resistive DC load M L K J H G D E F A B C 2CDC 282 026 F0b06 2CDC 282 025 F0b06 Resistive AC load 1.0 0.9 2CDC 282 023 F0b06 Derating curve 0.8 F 0.7 0.5 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 cos 1.0 2CDC 282 014 F0b06 0.6 5 Dimensional drawings Dimensions in mm 2CDC 282 011 F0b06 22.5 0,88 " 18 0.71" 2CDC 282 012 F0b06 CC-E IAC/ILPO, CC-E I/I CC-E/x .039 2CDC 282 024 F0b06 CC-U/x , CC-U/xR 5/27 2CDC110004C0207 Notes 5 5/28 2CDC110004C0207