PESD2CAN CAN bus ESD protection diode Rev. 2 -- 27 September 2012 Product data sheet 1. Product profile 1.1 General description PESD2CAN in a small SOT23 Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller Area Network (CAN) bus lines from the damage caused by ElectroStatic Discharge (ESD) and other transients. 1.2 Features and benefits Max. peak pulse power: PPP = 230 W at tp = 8/20 s Low clamping voltage: VCL = 41 V at IPP = 5 A Ultra low leakage current: IRM < 1 nA ESD protection up to 30 kV IEC 61000-4-2, level 4 (ESD) IEC 61000-4-5 (surge); IPP = 5 A at tp = 8/20 s AEC-Q101 qualified 1.3 Applications CAN bus protection Automotive applications 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit - - 24 V - 25 30 pF Per diode VRWM reverse standoff voltage Cd diode capacitance f = 1 MHz; VR = 0 V 2. Pinning information Table 2. Pinning Pin Description 1 cathode 1 2 cathode 2 3 common cathode Simplified outline Graphic symbol 3 1 3 1 2 2 006aaa155 PESD2CAN Nexperia CAN bus ESD protection diode 3. Ordering information Table 3. Ordering information Type number PESD2CAN Package Name Description Version - plastic surface-mounted package; 3 leads SOT23 4. Marking Table 4. Marking codes Type number Marking code[1] PESD2CAN 6R* [1] * = placeholder for manufacturing site code. 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions peak pulse power tp = 8/20 s peak pulse current tp = 8/20 s Min Max Unit [1][2] - 230 W [1][2] - 5 A Per diode PPP IPP Per device Tj junction temperature - 150 C Tamb ambient temperature 55 +150 C Tstg storage temperature 65 +150 C [1] Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC 61000-4-5. [2] Measured from pin 1 to 3 or 2 to 3. Table 6. ESD maximum ratings Symbol Parameter Conditions electrostatic discharge voltage IEC 61000-4-2 (contact discharge) Min Max Unit [1][2] - 30 kV [2] - 400 V [1][2] - 16 kV Per diode VESD machine model MIL-STD-883 (human body model) PESD2CAN Product data sheet [1] Device stressed with ten non-repetitive ESD pulses. [2] Measured from pin 1 to 3 or 2 to 3. All information provided in this document is subject to legal disclaimers. Rev. 2 -- 27 September 2012 (c) Nexperia B.V. 2017. All rights reserved 2 of 13 PESD2CAN Nexperia CAN bus ESD protection diode Table 7. ESD standards compliance Standard Conditions Per diode IEC 61000-4-2; level 4 (ESD) > 15 kV (air); > 8 kV (contact) MIL-STD-883; class 3B (human body model) > 8 kV 001aaa631 IPP 001aaa630 120 100 % 90 % 100 % IPP; 8 s IPP (%) 80 e-t 50 % IPP; 20 s 40 10 % 0 10 20 30 30 ns 40 t (s) Fig 1. t tr = 0.7 ns to 1 ns 0 60 ns 8/20 s pulse waveform according to IEC 61000-4-5 PESD2CAN Product data sheet Fig 2. ESD pulse waveform according to IEC 61000-4-2 All information provided in this document is subject to legal disclaimers. Rev. 2 -- 27 September 2012 (c) Nexperia B.V. 2017. All rights reserved 3 of 13 PESD2CAN Nexperia CAN bus ESD protection diode 6. Characteristics Table 8. Characteristics Tamb = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Per diode VRWM reverse standoff voltage - - 24 V IRM reverse leakage current VRWM = 24 V - <1 10 nA VBR breakdown voltage IR = 1 mA 26.2 28 30.3 V Cd diode capacitance f = 1 MHz; VR = 0 V clamping voltage VCL differential resistance rdif - 25 30 pF IPP = 1 A [1][2] - - 34 V IPP = 5 A [1][2] - - 41 V - - 300 IR = 1 mA [1] Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC 61000-4-5. [2] Measured from pin 1 to 3 or 2 to 3. 006aaa937 8.0 IPP (A) 001aaa193 1.2 PPP PPP(25C) 6.0 0.8 4.0 0.4 2.0 0 0 25 30 35 40 0 45 50 100 150 200 Tj (C) VCL (V) Tamb = 25 C Fig 3. Peak pulse current as a function of clamping voltage; typical values PESD2CAN Product data sheet Fig 4. Relative variation of peak pulse power as a function of junction temperature; typical values All information provided in this document is subject to legal disclaimers. Rev. 2 -- 27 September 2012 (c) Nexperia B.V. 2017. All rights reserved 4 of 13 PESD2CAN Nexperia CAN bus ESD protection diode 006aaa938 30 Cd (pF) 006aaa939 50 IR (mA) 26 (1) (2) (3) 40 (1) 22 30 (2) (3) 18 20 (4) (5) 14 10 10 0 0 8 16 24 24 26 28 30 32 VR (V) 34 VR (V) f = 1 MHz (1) Tamb = 55 C (1) Tamb = 150 C (2) Tamb = 25 C (2) Tamb = 125 C (3) Tamb = 150 C (3) Tamb = 85 C (4) Tamb = 25 C (5) Tamb = 40 C Fig 5. Diode capacitance as a function of reverse voltage; typical values Fig 6. Reverse current as a function of reverse voltage; typical values 006aaa940 25 IPP VR (V) 20 15 -VCL -VBR -VRWM IR IRM -IRM -IR 10 5 VRWM VBR VCL - 0 0 10 20 + -IPP 30 IRM (nA) 006aaa676 Tamb = 150 C IR is less than 1 nA at 55 C and 25 C. Fig 7. Reverse voltage as a function of reverse leakage current; typical values PESD2CAN Product data sheet Fig 8. V-I characteristics for a bidirectional ESD protection diode All information provided in this document is subject to legal disclaimers. Rev. 2 -- 27 September 2012 (c) Nexperia B.V. 2017. All rights reserved 5 of 13 PESD2CAN Nexperia CAN bus ESD protection diode ESD TESTER RZ 450 RG 223/U 50 coax 4 GHz DIGITAL OSCILLOSCOPE 10x ATTENUATOR 50 CZ IEC 61000-4-2 network CZ = 150 pF; RZ = 330 D.U.T. (Device Under Test) vertical scale = 10 A/div horizontal scale = 15 ns/div unclamped +8 kV ESD pulse waveform (IEC 61000-4-2 network) vertical scale = 25 V/div horizontal scale = 100 ns/div clamped +8 kV ESD pulse waveform (IEC 61000-4-2 network), Pin 1 to 3 vertical scale = 10 A/div horizontal scale = 15 ns/div vertical scale = 25 V/div horizontal scale = 100 ns/div unclamped -8 kV ESD pulse waveform (IEC 61000-4-2 network) Fig 9. clamped -8 kV ESD voltage waveform (IEC 61000-4-2 network), Pin 1 to 3 006aaa941 ESD clamping test setup and waveforms PESD2CAN Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 27 September 2012 (c) Nexperia B.V. 2017. All rights reserved 6 of 13 PESD2CAN Nexperia CAN bus ESD protection diode 7. Application information The PESD2CAN is designed for the protection of two automotive CAN bus lines from the damage caused by ESD and surge pulses. The PESD2CAN can be used for both, high-speed CAN bus and fault-tolerant CAN bus protection. The PESD2CAN provides a surge capability of up to 230 W per line for an 8/20 s waveform. SPLIT CANH RT/2 CAN BUS TRANSCEIVER CAN bus RT/2 CANL Common mode choke (optional) 2 1 CG PESD2CAN 3 006aaa942 Fig 10. Typical application: ESD protection of two automotive CAN bus lines Circuit board layout and protection device placement: Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge transients. The following guidelines are recommended: 1. Place the PESD2CAN as close to the input terminal or connector as possible. 2. Minimize the path length between the PESD2CAN and the protected line. 3. Keep parallel signal paths to a minimum. 4. Avoid running protection conductors in parallel with unprotected conductors. 5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and ground loops. 6. Minimize the length of the transient return path to ground. 7. Avoid using shared transient return paths to a common ground point. 8. Use ground planes whenever possible. For multilayer PCBs, use ground vias. 8. Test information 8.1 Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. PESD2CAN Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 27 September 2012 (c) Nexperia B.V. 2017. All rights reserved 7 of 13 PESD2CAN Nexperia CAN bus ESD protection diode 9. Package outline 3.0 2.8 1.1 0.9 3 0.45 0.15 2.5 1.4 2.1 1.2 1 2 1.9 0.48 0.38 Dimensions in mm 0.15 0.09 04-11-04 Fig 11. Package outline SOT23 (TO-236AB) 10. Packing information Table 9. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number PESD2CAN [1] PESD2CAN Product data sheet Package SOT23 Description 4 mm pitch, 8 mm tape and reel Packing quantity 3000 10000 -215 -235 For further information and the availability of packing methods, see Section 14. All information provided in this document is subject to legal disclaimers. Rev. 2 -- 27 September 2012 (c) Nexperia B.V. 2017. All rights reserved 8 of 13 PESD2CAN Nexperia CAN bus ESD protection diode 11. Soldering 3.3 2.9 1.9 solder lands solder resist 3 2 1.7 solder paste occupied area 0.6 (3x) 0.7 (3x) Dimensions in mm 0.5 (3x) 0.6 (3x) 1 sot023_fr Fig 12. Reflow soldering footprint SOT23 (TO-236AB) 2.2 1.2 (2x) 1.4 (2x) solder lands 4.6 solder resist 2.6 occupied area Dimensions in mm 1.4 preferred transport direction during soldering 2.8 4.5 sot023_fw Fig 13. Wave soldering footprint SOT23 (TO-236AB) PESD2CAN Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 27 September 2012 (c) Nexperia B.V. 2017. All rights reserved 9 of 13 PESD2CAN Nexperia CAN bus ESD protection diode 12. Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes PESD2CAN v.2 20120927 Product data sheet - PESD2CAN v.1 Modifications: PESD2CAN v.1 PESD2CAN Product data sheet * * * * * * Section 1.2 "Features and benefits": updated Table 6 "ESD maximum ratings": corrected Tamb minimum value Table 7 "ESD standards compliance": updated Section 8 "Test information": added Section 11 "Soldering": added Section 13 "Legal information": updated 20061222 Product data sheet - All information provided in this document is subject to legal disclaimers. Rev. 2 -- 27 September 2012 - (c) Nexperia B.V. 2017. All rights reserved 10 of 13 PESD2CAN Nexperia CAN bus ESD protection diode 13. Legal information 13.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com. 13.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet. 13.3 Disclaimers Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia's aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes -- Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. PESD2CAN Product data sheet Suitability for use in automotive applications -- This Nexperia product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the Nexperia product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). Nexperia does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of Nexperia products by customer. All information provided in this document is subject to legal disclaimers. Rev. 2 -- 27 September 2012 (c) Nexperia B.V. 2017. All rights reserved 11 of 13 PESD2CAN Nexperia CAN bus ESD protection diode No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Quick reference data -- The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. 13.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com PESD2CAN Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 27 September 2012 (c) Nexperia B.V. 2017. All rights reserved 12 of 13 Nexperia PESD2CAN CAN bus ESD protection diode 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 8.1 9 10 11 12 13 13.1 13.2 13.3 13.4 14 15 (c) Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Application information. . . . . . . . . . . . . . . . . . . 7 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 7 Quality information . . . . . . . . . . . . . . . . . . . . . . 7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8 Packing information . . . . . . . . . . . . . . . . . . . . . 8 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Contact information. . . . . . . . . . . . . . . . . . . . . 12 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 27 September 2012