Product catalogue | Electronics | Analogue signal conditioning | DC/DC passive isolator | Signal multiplexer General ordering data Order No. Part designation Version EAN Qty. 8581170000 WAZ5 CCC 2OLP Signal distributor, 2 x 4...20 mA (current loop) , Tension clamp connection 4032248234479 1 pc(s). Input Input current Max. current Voltage drop Number of inputs 4...20 mA (current loop) 40 mA 3.8 V 1 Output Output current Load resistance, current Output signal limit Accuracy Cut-off frequency (-3 dB) Residual ripple Step response time Status indicator Temperature coefficient Number of outputs 2 x 4...20 mA (current loop) R = (U-12 V) / 20 mA z.B. 600 at 24 V Approx. 31 mA Typical 0.1%, max. 0.2% 30 Hz 20 mV 120 mV at 500 < 20 ms Green LED 150 ppm/K 2 General data Function Input/Output Galvanic isolation Type of connection Mounting rail Weight Voltage supply Ambient temperature (operational) Signal distributor 4...20 mA/ 2 x 4...20 mA Passive isolator Tension clamp connection TS 35 100 g Min. 12 V DC/ max. 30 V DC 0C...+55 C (side by side) -1- Product catalogue | Electronics | Analogue signal conditioning | DC/DC passive isolator | Signal multiplexer General data Storage temperature -20 C...+85 C Insulation coordination Standards EMC standards Insulation voltage input, output Insulation voltage output/output Insulation voltage input or output/rail Insulation voltage input or output/supply Clearance & creepage distances Impulse withstand voltage Pollution severity Overvoltage category Rated voltage EN 50178 EN 55011, EN 61000-6 4 kV / 5 s 4 kV / 5 s 4 kV / 1 min. 4 kV / 5 s 5.5 mm 4 kV 2 III 300 V Dimensions Clamping range, max. Clamping range, min. Clamping range, nom. Length Height Width 2.5 mm 0.5 mm 1.5 mm 92.4 mm 112.4 mm 17.5 mm Approvals Approvals institutes Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-21-01-20 27-21-01-20 27-21-01-20 Similar products Order No. 8581160000 Part designation WAS5 CCC 2OLP Version Signal distributor, 2 x 4...20 mA (current loop) , Screw connection -2-