5414284-2 - Tyco Electronics

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Decoupled Connectors

Product Facts

■Built-in chip capacitors

filter high-frequency noise

to panel ground

■PC board mounting with

vertical and standard or

low-profile right-angle

configurations

■Cable mount bulkhead BNC

version available

■Drop-in replacement for

Tyco Electronics standard

BNC printed circuit board

connectors

■One-piece design and

robotic capacity to reduce

assembly time

Tyco Electronics capaci-

tively decoupled connectors

provide the fast, better way

to reduce noise and reduce

ground loops on coaxial

interconnections. The high-

frequency noise generated

by fast rise times can cause

both false triggering of

circuits as well as emissions

that can be radiated or

conducted outside the

equipment. Such emissions

can interfere with nearby

equipment. Ground loops

are also a problem for net-

worked systems. Ground

loops are caused when two

interconnected units are at

different voltage potentials.

The typical way to handle

such EMI and ground loop

problems is to decouple

the cable shield from the

ground panel by soldering

a ceramic disk capacitor

between the cable shield

and the panel. The capaci-

tor shunts high-frequency

noise to ground. While

effective, this approach

is time consuming and

expensive.

The Capacitively Decoupled

connector has built-in chip

capacitors. These capaci-

tors establish the electrical

contact between the outer

shield and a clip. This clip

provides a short electrical

path between the capaci-

tors and panel. As a result,

high-frequency noise is

effectively shunted to

ground, while the DC path

is blocked.

The connectors offer com-

patibility in design and

manufacture. The same

footprint and dimensional

envelope make them a

drop-in replacement for

Tyco Electronics standard

BNC or TNC printed circuit

board connectors. In addi-

tion, they can be robotically

picked and placed for high-

speed automated assembly

to pc boards.

Product Specification

108-1263 — BNC Decoupled PCB

Press-Fit Connection

108-1269 — BNC Decoupled PCB

Connectors

108-1490 — BNC Decoupled Cable

Mount

Decoupled Connectors (Continued)

12.83+0.13

-0.00

[.505+.005]

-.000

Dia.

5.54+0.08

-0.00

[.218+.003]

-.000

12.83+0.13

-0.00

[.505+.005]

-.000

Dia.

5.54+0.08

-0.00

[.218+.003]

-.000

10.16 ±0.08

[.400 ±.003]

2.54 ±0.05

[.100 ±.002]

0.89 ±0.08

[.035 ±.003]

2.01 ±0.08

[.079 ±.003]

(2 Holes)

(Top View)

5.08 ±0.05

[.200 ±.002]

5.08 ±0.05

[.200 ±.002]Mating

Face

(Top View)

10.16 ±0.08

[.400 ±.003]

10.16 ±0.08

[.400 ±.003]

5.08 ±0.05

[.200 ±.002]

2.54 ±0.05

[.100 ±.002]

0.89 ±0.08

[.035 ±.003]

2.01 ±0.08

[.079 ±.003]

(2 Holes)

5.08 ±0.05

[.200 ±.002]

34.93

[1.375]

15.08

[.625]

20.96

[.825]

PC Board/Panel Mount

Jacks Decoupled to Panel

Material

Body—VALOX, black

Dielectric —Polymethylpentene

34.93

[1.375]

20.96

[.825]

Style B

Right-Angle BNC

Style A

Vertical BNC

Recommended PC Board Layout

Note: Both styles are shown with a

standard clip. See next page for

other clip styles.

For height dimensions see chart on

page 85.

Maximum Panel Thickness 6.1 [.240]

Recommended Panel Cutout

Maximum Panel Thickness 6.1 [.240]

Recommended Panel Cutout

Recommended PC Board Layout

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

VALOX is a trademark of General Electric

Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Decoupled Connectors (Continued)

Clip Styles

Extended

For use with or without a jam nut

Short Electrical Path

For reduced series inductance in ground path

Shortening

Bar

Standard

20.96

[.825]

19.30

[.760]

Max.

Clip Width

2.54

[.100]

Max.

Recommended

Panel Mount

.304

[.012]

20.96

[.825]

Flush

For closer centerline-to-centerline connector spacing

14.76

[.581] Clip

Width

20.96

[.825]

2.54

[.100]

Max.

Recommended

Panel Mount

.304

[.012]

20.96

[.825]

Decoupled Connectors (Continued)

PC Board/Panel Mount

Jacks Decoupled to Panel

(Continued)

Mounting Post Styles

Standard Compliant

Capacitance/ Mounting LPart

Description Voltage Clip Post Mounting B* A* Style1No.

Post Length

Vertical 9400pF Standard Standard 3.48 —— A5413476-2

501500VDC .137

9400pF Standard Standard 4.01 15.88 8.59 B5413524-2

Standard 1500VDC .158 .625 .338

Right-Angle 9400pF Standard Compliant 2.79 15.88 8.59 B5413524-5

501500VDC .110 .625 .338

Standard Right-Angle 9400pF Standard — — 15.88 8.59 B5414215-1

W/O Mounting Post 5021500VDC .625 .338

9400pF Standard Standard 4.01 13.18 6.91 B5413515-2

1500VDC .158 .519 .272

20000pF Standard Standard 4.01 13.18 6.91 B5413515-3

500VDC .158 .519 .272

Low Profile 7900pF Standard Compliant 2.79 13.18 6.91 B5413515-7

Right-Angle 1600VDC .110 .519 .272

509400pF Standard Compliant 4.70 13.18 6.91 B5413515-8

1500VDC .185 .519 .272

9400pF Standard Compliant 2.79 13.18 6.91 B5413515-9

1500VDC .110 .519 .272

Low Profile Right-

Angle W/Special Clip 9400pF Extended Compliant 2.79 13.18 6.91 B5414284-2

& High Temperature 500VDC .110 .519 .272

Housing 50

Low Profile

Right-Angle 9400pF Flush Compliant 4.70 13.18 6.91 B5414352-1

W/High Temperature 500VDC .185 .519 .272

Housing 50

Low Profile 9400pF Standard Standard 4.01 13.18 —B5414094-2

Right-Angle 751500VDC .158 .519

9400pF Standard Standard 4.01 6.17 11.68 —5415103-1

Ultra Low Profile 1500VDC .158 .243 .460

Right-Angle 9400pF Standard Compliant 2.79 6.17 11.68 —5415103-2

75 1500VDC .110 .243 .460

1See pages 83 and 84 for Connector Styles.

2See customer drawing for PC Board Layout.

*See page 83 for dimension reference.

BNC

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Decoupled Connectors (Continued)

Capacitance/ Contact Mounting LPart

Description Voltage Plating Clip Post Mounting B* A* No.

Post Length

50Product

Low Profile

Right-Angle 7900pF Gold1 Standard Compliant 2.79 13.18 6.91 5414651-3

W/ ESD Protection 1500VDC .110 .519 .272

75Product

Standard

Right-Angle 9400pF Gold1 Standard Standard 4.01 15.88 8.59 5415085-1

W/ ESD Protection 1500VDC .158 .625 .338

Low Profile 9400pF 2.79 13.18 6.91

Right-Angle 1500VDC Gold1 Flush Compliant .110 .519 .272 5415216-1

ESD Protected

*See page 83 for dimension reference.

Right-Angle BNC Jack

PC Board/Panel Mount

Decoupled to Panel

ESD Protected

See page 83 Style B for panel

cutout and recommended PC board

configuration.

ESD Device ESD

Protection

1/2-28 Thread

Note: See Tyco Electronics Customer drawing for voltage breakdown rating.

Right-Angle BNC Jack

PC Board/Panel Mount

Decoupled to Board

ESD Protected

Recommended PC Board Layout Recommended Panel Cutout

Part No. 5415205-1

Capacitance Voltage

9400pF 1500VDC

10.16 ± 0.08

[.400 ± .003]

5.08 ± 0.05

[.200 ± .002]

2.54 ± 0.05

[.100 ± .002]

0.89 ± 0.08

[.035 ± .003]

Dia.

2 Holes

2.01 ± 0.08

[.079 ± .003]

Dia.

2 Holes

11.13 + 0.13

- 0.00

+ .005

- .000

[.438 ]

12.83 + 0.13

- 0.00

+ .005

- .000

[.505 ]

Dia.

13.18

[.519]

Compliant

Board Lock

ESD

Device

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

Decoupled Connectors (Continued)

Press-Fit, Vertical BNC

Jacks, PC Board Mount

Decoupled to Board

Material

Dielectric—TEFLON

Isolation Pad —Polyester

Plating

Body—Nickel

Ground Clip —Nickel

Center Contact —Gold

Action Pin Legs —Gold

Part No. 5414553-1 50 Ohm

Part No. 5414493-4 75 Ohm

BNC Bulkhead Jacks,

Crimp

17.48

[.688]

Interchangeable

RG/U Termination Center Body Dies for Hand

Description Contact Dielectric Style Tool 69710-1 Part No.

Cable Type Plating Plating & 626 Pneu.

Head 318161-1

50RG 58, 58A, 58B, 58C Hex Crimp Gold Nickel Polymethylpentene Commercial 58436-1 5414758-1

50RG 174, 174A, 316, 188, 188A Hex Crimp Gold Nickel Polymethylpentene Commercial 58436-3 5414758-2

50RG 174, 174A, 316, 188, 188A Hex Crimp Gold Nickel Polymethylpentene Commercial 58436-3 5414758-3

75 ESD RG 179, 187 Hex Crimp Gold Nickel Polymethylpentene Commercial 58425-2 5415779-1

16.51

[.650]

Max.

over

points

Sq.

15.88

[.625] Max.

40.64

[1.600] Max.

Recommended Panel Cutout

12.83+0.13

-0.00

[.505+.005]

-.000

Dia.

5.54+0.08

-0.00

[.218+.003]

-.000

12.70

[.500]

6.35

[.250]

12.70

[.500]

6.35

[.250]

1.70

[.067]

2 Plc.

Plated Thru Hole

For Drive Screw

Dia.

1.02 ±0.08

[.040 ±.003]

3 Plc.

Plated Thru Hole

Dia.

Ground Area 9.14 [.360] Dia. OD

6.35 [.250] Dia. ID

Recommended PC Board Layout

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

TEFLON is a trademark of E.I. Dupont de

Nemours and Company.