6Catalog E 074545 07/03 Edition 1 www.erni.com
Right Angle Male Connectors Type B for Daughter Cards
The ERmet type B right angle male connector provides 125
contacts in a 5 row x 25 position fully loaded configuration.
The connector is designed for gas tight, pressfit installation
and is provided in two different configurations: with
integrated upper ground return shield and without integrated
upper ground return shield.
The ERmet type B right angle male connector has an uninter-
rupted pin field with no multifunction cavity. This connector is
not designed to be used alone, but is intended to be used in
conjunction with either a type A or C ERmet connector.
Sequential mating can be achieved by the use of the three
available configurations listed below. The available chicklet
configurations are denoted A, B, and C, to correspond with
the contact mating lengths found in ERmet 2mm male con-
nectors. Within each chicklet, the contact mating length will
always be the same and the shield pins will always be Level 3.
Dimensional Drawing
All dimensions in mm