(1/4)
010-01 / 20101006 / e9412_mmz0603.fm
• All specifications are subject to change without notice.
Chip Beads(SMD)
For Signal Line
MMZ Series MMZ0603 Type
FEATURES
• This is a multilayered chip bead product with dimensions of
L0.6×W0.3×T0.3mm.
• The product is magnetically shielded, allowing high density
mounting.
• We refined the rules for internal conductor design to reduce
floating capacity between conductors, which in turn has
contributed to a dramatic improvement in high frequency
characteristics. We have also been able to expand and reinforce
the EMI suppression in the GHz range.
• It is a product conforming to RoHS directive.
APPLICATIONS
Removal of signal line noises of cellular phones, portable audio
players, various modules, DSCs, portable game machines, etc.
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions L×W
(3) Material code
(4) Nominal impedance
121:120Ω at 100MHz
(5) Characteristic type
(6) Packaging style
T:Taping
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components. The preheat-
ing temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed cir-
cuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
MATERIAL CHARACTERISTICS
S material: Standard type that features impedance characteristics
similar to those of a typical ferrite core.
For signal line applications in which the blocking region
is near 100MHz. Impedance values selected for effec-
tiveness at 40 to 300MHz.
Y material: High frequency range type intended for the 100MHz
region and above.
For signal line applications in which the signal fre-
quency is far from the cutoff frequency. Impedance val-
ues selected for effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low fre-
quencies and sharply increasing impedance at high
frequencies. Designed for high impedance at high fre-
quencies (300MHz to 1GHz) for signal line applica-
tions.
F material: This new product inherits the characteristic of our D-
material, namely its sharp impedance rise time, and its
impedance peak frequency has been shifted higher
into range. The product offers excellent noise suppres-
sion from 600MHz to as high as in the GHz range.
TYPICAL MATERIAL CHARACTERISTICS
Conformity to RoHS Directive
MMZ 0603 S 121 C T
(1) (2) (3) (4) (5) (6)
0
200
400
600
800
1000
1200
1400
1600
1800
2000
10 100 1000
Frequency(MHz)
Impedance(Ω)
S
D
F
Y
• Please contact our Sales office when your application are considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(2/4)
010-01 / 20101006 / e9412_mmz0603.fm
• All specifications are subject to change without notice.
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTERN
TEMPERATURE RANGES
PACKAGING STYLE AND QUANTITIES
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
ELECTRICAL CHARACTERISTICS
∗Test equipment: E4991A or equivalent
Test tool: 16197 or equivalent
Test temperature: 25±10°C
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ0603S100C MMZ0603S800C MMZ0603S121C
MMZ0603S241C MMZ0603S471C MMZ0603S601C
Operating/storage –55 to +125°C
Packaging style Quantity
Taping 15000 pieces/reel
0.3±0.03
0.6±0.03
0.1min.
0.3±0.03
Weight: 0.3mg
Dimensions in mm
0.30 0.250.25
0.30
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
Part No. Impedance
(Ω)[100MHz]∗
DC resistance
(Ω)max.
Rated current
(mA)max.
MMZ0603S100C 10±5Ω0.12 500
MMZ0603S800C 80±25% 0.37 200
MMZ0603S121C 120±25% 0.45 200
MMZ0603S241C 240±25% 0.75 200
MMZ0603S471C 470±25% 1.30 100
MMZ0603S601C 600±25% 1.45 100
MMZ0603Y121C 120±25% 0.75 200
MMZ0603Y241C 240±25% 0.80 200
MMZ0603Y471C 470±25% 1.40 200
MMZ0603Y601C 600±25% 1.50 200
MMZ0603D330C 33±25% 0.85 100
MMZ0603D560C 56±25% 1.05 100
MMZ0603D800C 80±25% 1.40 100
MMZ0603F100C 10±5Ω0.60 200
MMZ0603F220C 22±25% 1.00 200
MMZ0603F330C 33±25% 1.30 150
450
400
350
300
250
200
150
100
50
01 10 100 1000 10000
Frequency(MHz)
Impedance
(Ω)
Z
X
R
50
45
40
35
30
25
20
15
10
5
01 10 100 1000 10000
Frequency(MHz)
Impedance
(Ω)
Z
X
R
450
400
350
300
250
200
150
100
50
01 10 100 1000 10000
Frequency(MHz)
Impedance
(Ω)
Z
X
R
1000
800
600
400
200
01 10 100 1000 10000
Frequency(MHz)
Impedance
(Ω)
Z
X
R
1000
800
600
400
200
01 10 100 1000 10000
Frequency(MHz)
Impedance
(Ω)
Z
X
R
450
400
350
300
250
200
150
100
50
01 10 100 1000 10000
Frequency(MHz)
Impedance
(Ω)
Z
X
R
(3/4)
010-01 / 20101006 / e9412_mmz0603.fm
• All specifications are subject to change without notice.
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ0603Y121C MMZ0603Y241C MMZ0603Y471C
MMZ0603Y601C
MMZ0603D330C MMZ0603D560C MMZ0603D800C
MMZ0603F100C MMZ0603F220C MMZ0603F330C
1 10 100 1000 10000
Frequency(MHz)
0
200
400
600
800
1000
Impedance(Ω)
Z
X
R
0
50
100
150
200
250
300
Impedance(Ω)
1 10 100 1000 10000
Frequency(MHz)
Z
X
R
1 10 100 1000 10000
Frequency(MHz)
0
200
400
600
800
1000
Impedance(Ω)
Z
X
R
1 10 100 1000 10000
Frequency(MHz)
0
200
400
600
800
1000
Impedance(Ω)
Z
X
R
1 10 100 1000 10000
Frequency(MHz)
0
200
400
600
800
1000
Impedance(Ω)
Z
X
R
1 10 100 1000 10000
Frequency(MHz)
0
100
200
300
400
500
Impedance(Ω)
Z
X
R
1 10 100 1000 10000
Frequency(MHz)
0
200
400
600
800
1000
Impedance(Ω)
Z
X
R
1 10 100 1000 10000
Frequency(MHz)
0
100
200
300
400
500
600
700
800
Impedance(Ω)
Z
X
R
1 10 100 1000 10000
Frequency(MHz)
0
100
200
300
400
500
Impedance(Ω)
Z
X
R
1 10 100 1000 10000
Frequency(MHz)
0
200
400
600
800
1000
1200
Impedance(Ω)
Z
XR
(4/4)
010-01 / 20101006 / e9412_mmz0603.fm
• All specifications are subject to change without notice.
PACKAGING STYLES
REEL DIMENSIONS
TAPE DIMENSIONS
1.0
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
ø60min.
14.4max.
Dimensions in mm
8.4 +2.0
–0.0
8.0±0.3 3.5±0.05
1.75±0.1
4.0±0.1
2.0±0.05 2.0±0.05
Sprocket hole Cavity
1.5 +0.1
–0.0
0.5max. 0.38±0.05
0.68±0.05
160min. Taping 200min.
300min.
Drawing direction
Dimensions in mm
