611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com
Frequency Range (min)
0.01 – 1
GHz
Insertion Loss (max)
1.3
dB
VSWR (max)
1.5
ratio
Isolation (min)
80
dB
Switching speed (max)
250
nsec
CW RF power, operating (max)
1
W
NOTES: MECHANICAL SPECIFICATIONS:
DC Bias: +5V +/-0.5V @ 80mA max Case Styles: S2 Outline (Two bit control)
(Standard) -15V +/-3V @ 50mA max S2-1 Outline (Single bit control)
Finish: Gold plate per MIL-G-45204, Chem film per MIL-C-5541
DC Bias: +5V +/-0.5V @ 100mA max Connectors: SMA Female per MIL-C-39012
(-5 option) -5V +/-0.5V @ 60mA max Bias & Control Pins: ø0.02” x 0.15” long
Weight: 20g max
DC Bias: +15V +/-3V @ 80mA max Mounting: ø0.10” through holes (4) places
(-12 option) -15V +/-3V @ 50mA max
Control: TTL 0 = Low Loss E1 controls J2 – J1
(Standard) TTL 1 = Isolation E2 controls J3 – J1
Single Bit Control: E1=0: J2 – J1 low loss, J3 – J1 isolation (E2=N/C)
(-1 option) E1=1: J3 – J1 low loss, J2 – J1 isolation (E2=N/C)
Absorptive switch: Internal 50Ω terminations at J2 and J3 (in isolation mode).
Switching speed is defined as 50%TTL to 90% (t-on) and 50%TTL to 10%RF (t-off).
ENVIRONMENTAL SPECIFICATIONS: SCREENING:
MIL-E-5400, MIL-STD-202, MIL-E-16400 Internal Visual per MIL-STD-883, Method 2017
Operating Temp: -55°C to +85°C Temperature Cycle: -65°C to +100°C, 10 cycles
Storage Temp: -65°C to +125°C
Humidity: MIL-STD-202F, M103, Cond B Hermetically-sealed switches are fine and gross leak checked
Shock: MIL-STD-202F, M213, Cond B per MIL-STD-883, Method 1014.
Altitude: MIL-STD-202F, M105, Cond B
Vibration : MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Temperature Cycle: MIL-STD-202F, M105C, Cond D
J2
E1
ACC
E2
-V
+V
G
J3
J1
SN: DC:
0000 WWYY J2
N/C
ACC
E1
-V
+V
G
J3
J1
SN: DC:
0000 WWYY
OUTLINE CASE STYLE S2 OUTLINE CASE STYLE S2-1
1209
PART NUMBER ORDERING INFORMATION:
Add “-RC” suffix: RoHS-compliant
Add “-5” suffix: +/-5V DC supplies
Add “-5-RC” suffix: +/-5V DC supplies, RoHS-compliant
Add “-12” suffix: +/-12V to 18V DC supplies
Add “-12-RC” suffix: +/-12V to 18V DC supplies, RoHS-compliant
Add “-1”: Single bit logic control
Add “-1-RC” suffix: Single bit logic control, RoHS-compliant
Add “-1-5” suffix: Single bit logic control, +/-5V DC supplies
Add “-1-5-RC” suffix: Single bit logic control, +/-5V DC supplies,
RoHS-compliant
Add “-1-12” suffix: Single bit logic control, +/-12V to 18V DC
supplies
Add “-1-12-RC” suffix: Single bit logic control, +/-12V to 18V DC
supplies, RoHS-compliant
Add “-H” suffix: Hermetic seal (does not apply to RoHS-compliant
models)
S2H3
SWITCH
SINGLE-POLE, SINGLE-THROW
ABSORPTIVE
