Part Number 856625 520 MHz SAW Filter Data Sheet Features * * * * * * * Usable bandwidth 11 MHz High attenuation Single ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 5.00 x 5.00 x 1.32 mm Bottom View SPM-20 1 0.66 1.32 NOM. 1.52 MAX. 2 3 4 8 5.00 1.27 7 Pin No. 7 1 3 5 2,4,6,8 5.00 1.27 2.08 6 5 Description Input Input return (GND) Output Output return (GND) Case ground 0.64 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width +0.15/-0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev A 12/07 TriQuint Semiconductor, Inc. Page 1 of 5 Part Number 856625 520 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 oC Parameter (3) Minimum Typical (4) Maximum Unit 525.5 526.5 509.5 470 - 520 9.5 513.1 526.7 512.2 527.6 510.9 529.1 508.9 532.9 12 514.5 513.5 530.5 550 MHz dB MHz MHz MHz MHz MHz MHz MHz MHz - 0.4 1.0 dB p-p - 30 150 ns p-p 40 40 35 35 30 35 40 40 - 52 46 41 41 35 39 48 66 50 50 - dB dB dB dB dB dB dB dB Center Frequency Insertion Loss at Center Frequency Lower 1 dB Bandedge (5) Upper 1 dB Bandedge Lower 3 dB Bandedge (5) Upper 3 dB Bandedge Lower 10 dB Bandedge (5) Upper 10 dB Bandedge Lower 40 dB Bandedge (5) Upper 40 dB Bandedge Amplitude Variation (6) 514.5 - 525.5 MHz Group Delay Variation (6) 514.5 - 525.5 MHz Relative Attenuation (5) 10 - 350 MHz 350 - 470 MHz 470 - 500 MHz 500 - 506 MHz 534 - 537 MHz 537 - 550 MHz 550 - 600 MHz 600 - 800 MHz Source Impedance (7) Load Impedance (7) Notes: 1. 2. 3. 4. 5. 6. 7. All specifications are based on the TriQuint test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to manufacturing tolerances Typical values are based on average measurements at room temperature All attenuation measurements are referenced to IL at center frequency Variation is the total peak to peak variation over the defined frequency range This is optimal impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 12nH 18nH 5.1nH 7 50 Single ended Input 50 Subject to change or obsolescence without notice 3 10pF 12pF 50 1,2,4 5,6,8 Rev A 12/07 TriQuint Semiconductor, Inc. 50 Single ended Output Page 2 of 5 Part Number 856625 520 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev A 12/07 TriQuint Semiconductor, Inc. Page 3 of 5 Part Number 856625 520 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 12nH 18nH 5.1nH 7 50 Single ended Input 3 10pF 12pF 50 50 Single ended Output 50 1,2,4 5,6,8 Marking PCB Footprint 5.20 Sawtek logo 2.28 Marking code 1.47 BG JJJYM .84 .71 .43 Date code ID dot TBD The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code 1.47 .84 This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 12.8 2.7 Sawtek logo O330 4.0 0.3 2.0 O1.5 A 1.75 5.5 5.25 ID dot O102 O20.2 O13.0 Direction of travel 2.0 1.8 Section A-A 5.25 8.0 O1.5 12.0 A Dimensions shown are nominal in millimeters Packaging quantity: 4000 units/reel Subject to change or obsolescence without notice Rev A 12/07 TriQuint Semiconductor, Inc. Page 4 of 5 Part Number 856625 520 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +85 +85 Unit o C C o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters RoHS Information Soldering Profile Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev A Or contact one of our worldwide Network of sales offices, Representatives or distributors 12/07 TriQuint Semiconductor, Inc. Page 5 of 5