1997 Nov 04 228
Philips Components Product specification
Miniature ceramic plate capacitors Class 2, 1000 V (DC)
(2C2 and 2D1 flanged types)
FEATURES
•High reliability
•Coupling and decoupling
•Space saving
•High temperature circuits
•Professional circuits.
APPLICATIONS
In electronic circuits where non-linear
change of capacitance with
temperature is permissible and low
losses are not essential, e.g. coupling
and decoupling. Because of their
small size, the capacitors are ideal for
circuitry with high component density.
DESCRIPTION
The capacitors consist of a thin
rectangular ceramic plate, both sides
of which are metallized. The tinned
connecting leads are secured using a
high melting point solder. The
capacitors are encapsulated in epoxy
lacquer, which is resistant to all
commonly used cleaning solvents.
They have small dimensions and
narrow tolerances on the lead
spacing. The leads are provided with
a flange. The flange guarantees that
the leads are free of lacquer, and its
shape allows soldering gasses to
escape freely, ensuring excellent
solderability. This makes the
capacitors suitable for both
hand-mounting and automatic
insertion.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Capacitance range (E12 series) 100 to 1800 pF
Dielectric material K2000
Rated DC voltage 1000 V
Tolerance on capacitance ±10%
Sectional specification IEC 384-9 (2C2 and 2D1);
EIA (X5S/X8U)
Climatic category (IEC 68) 55/150/56
MAM035
Fig.1 Outlines.
1997 Nov 04 229
Philips Components Product specification
Miniature ceramic plate capacitors Class 2, 1000 V (DC)
(2C2 and 2D1 flanged types)
MECHANICAL DATA
Fig.2 Component outline.
MSA531
W0.6 5.08
H
L
O 0.6 0.06
0.05
5.08 0.5
0.1
Dimensions in mm.
For dimensions H, L and W see Tables 1 and 2.
Fig.3 Detail of flange.
Dimensions in mm.
handbook, halfpage
MSA534 - 1
0.2
0
1.4
0.2
0.4
0.1
1.0
0.25
0.03
0.03
0
0.05
Marking
The body of the capacitors is tan coloured. The
temperature dependency is indicated by a yellow coloured
cap. Capacitance value and voltage are indicated by a
marking code on the body. Refer to Table 3 for marking
codes.
Mounting
When bending, cutting or flattening, the leads should be
relieved of the applied load by supporting them at the
capacitor body.
Soldering conditions:
max. 265 °C, max. 10 s.
The capacitors are suitable for mounting on printed-circuit
boards (hand-mounting or automatic insertion).
Physical dimensions
Table 1 Capacitor dimensions and mass
Notes
1. Unless indicated in Table 3, the thickness of the
capacitors does not exceed 3.0 mm.
2. Tolerances are given between parentheses.
SIZE(1) W(2)
(mm) H(2)
(mm) MASS
(g)
I 3.6 (−1.1) 6.3 (−1.8) ≈0.14
IIA 3.9 (−1.4) 6.7 (−2.0) ≈0.15
IIB 4.5 (−1.8) 7.3 (−2.4) ≈0.15
III 5.3 (−1.8) 8.1 (−2.6) ≈0.17
IV 6.2 (−2.0) 9.0 (−2.7) ≈0.20
V 6.2 (−2.0) 11.2 (−3.1) ≈0.23
1997 Nov 04 230
Philips Components Product specification
Miniature ceramic plate capacitors Class 2, 1000 V (DC)
(2C2 and 2D1 flanged types)
PACKAGING
For details refer to this handbook, Chapter
“Miniature ceramic plate capacitors”
, Section
“General data”
.
ORDERING INFORMATION
Table 2 Catalogue numbers
Notes
1. Catalogue numbers to be completed by adding the 3-digit suffix for required capacitance value, see Table 3.
2. H0= 18.25 mm.
Table 3 Preferred range of values
Note
1. The voltage code may be marked on the front or rear side of the capacitor.
PITCH
P
LEAD
DIAMETER
d
CATALOGUE NUMBERS(1)
BULK PACKED ON TAPE(2)
(REEL) ON TAPE(2)
(AMMOPACK)
L≥13 mm L = 4 ±0.5 mm
5.08 mm
(0.2 inch) 0.6 mm
(0.024 inch) 2222 693 09... 2222 693 19... 2222 693 53... 2222 693 63...
CAPACITANCE
VALUE
(pF)
SIZE
(see Table 1)
MARKING CODE SUFFIX OF
CATALOGUE
NUMBERS
(see Table 2)
VALUE VOLTAGE(1)
100 I n10 1 kV 101
120 I n12 1 kV 121
150 I n15 1 kV 151
180 IlA n18 1 kV 181
220 IlA n22 1 kV 221
270 IlA n27 1 kV 271
330 IlB n33 1 kV 331
390 IlB n39 1 kV 391
470 IlB n47 1 kV 471
560 III n56 1 kV 561
680 III n68 1 kV 681
820 lV n82 1 kV 821
1000 IV 1n0 1 kV 102
1200 IV 1n2 1 kV 122
1500 V 1n5 1 kV 152
1800 V 1n8 1 kV 182
1997 Nov 04 231
Philips Components Product specification
Miniature ceramic plate capacitors Class 2, 1000 V (DC)
(2C2 and 2D1 flanged types)
ELECTRICAL CHARACTERISTICS
The capacitors meet the essential requirements of
“IEC 384-9”
. Unless stated otherwise all electrical values apply at an
ambient temperature of 20 ±1°C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 63 to 67%.
DESCRIPTION VALUE
Capacitance values measured at 1 kHz, 1 V see Table 3
Tolerance on the capacitance, after 1000 hours ±10%
Rated DC voltage 1000 V
DC test voltage; duration 1 minute 2000 V
DC test voltage of coating; duration 1 minute 2000 V
Insulation resistance at 500 V (DC) after 1 minute >6000 MΩ
Tan δ measured at 1 kHz, 1 V <3.5%
Category temperature range −55 to +85 °C (2C2) and −55 to +150 °C (2D1)
Storage temperature range −55 to +85 °C
Capacitance change as a function of temperature see Fig.4
Capacitance change as a function of frequency see Fig.5
Climatic category (IEC 68) 55/150/56
Ageing typical 1.5% per time decade
Fig.4 Typical capacitance change with respect to the capacitance at 20 °C as a function of temperature.
handbook, full pagewidth
100 150
60
−60
−100 50
CCA943
0
0
−50 T (°C)
Guaranteed limits 2C2
Typical spread
Guaranteed limits 2D1
∆C
C
(%)
1997 Nov 04 232
Philips Components Product specification
Miniature ceramic plate capacitors Class 2, 1000 V (DC)
(2C2 and 2D1 flanged types)
Fig.5 Typical capacitance change with respect to the capacitance at 1 kHz as a function of frequency.
U=1V.
handbook, full pagewidth
60
−60
−40
−20
0
10 102103104105106107
CCA048
20
40
∆C
C
(%)
f (Hz)
MLB033
103
102
101
103
10 1
10
1
102
f (MHz)
IZI
(Ω)100 pF
1000 pF
Fig.6 Typical impedance Z as a function of frequency.
