DATA SHEET CITILED COB Series Standard Type Ra70 Min. , Ra80 Min. Model CLU058-1825C4 Introduction P 2 Performance Characteristics P 3 Mechanical Dimensions P 5 Characteristic Curves P 6 Reliability P 9 Packing Specification P 10 Precaution P 11 1 Ref.CE-0080P-201710 Product Nomenclature CLU058 - 18 25 C4 - 27 3 M2 M2 - F1 [1] [2] [3] [4] [1] Product shape CLU058 [2] Die count in series 18 [3] Die count in parallel 25 [4] Nominal CCT 2700K [5] CRI (Ra) 80 M in. [5] 1. Introduction 1-1. Product Description CITIZEN ELECTRONICS is the first COB manufacture. Our advanced knowledge and packaging technology for many years has excellent reliability and high quality of our products. CITILED COB Series covers a wide range of luminous flux from a 10W incandescent bulb to a 500W mercury lamp in general lighting sources. The element arrangement of LED package is capable of utilizing light more effectively and higher performance. The new version of CITILED COB Series succeed to reduce the thermal resistance significantly. New version creates more options to match luminaire's products design (ex. High performance , Cost effective , Higher lumen density , Increased allowable max. If). The outline and LES size is same since version 1. 3-step MacAdam ellipse color definition at Tj=85C is available. 1-2. Features Mechanical Dimensions Package Structure Reference Assembly CRI (Ra) Nominal CCT Chromaticity Range : : : : : 38.0 x 38.0 x 1.4 (mm) Aluminum Base Chip on Board M3 screw, Connector 80 Min., 70 Min. 2,700K, 3,000K, 3,500K, 4,000K, 5,000K, 5,700K, 6,500K ( CRI(Ra) 80Min. ) 3,000K, 4,000K, 5,000K ( CRI(Ra) 70Min. ) : 3-step MacAdam Ellipse, the center refers to ANSI C78.377:2011. ( CRI(Ra) 80Min. ) 2-step MacAdam Ellipse, the center refers to ANSI C78.377:2011. ( CRI(Ra) 80Min. ) ANSI C78.377:2011. compliant ( CRI(Ra) 70Min. ) : 0.13C/W : 5750mA Thermal Resistance Maximum drive current RoHS compliant Better die arrangement for optics Wide range of luminous flux and high efficacy Improved lumen density compared with previous version UL recognized component (E358566) 2 Ref.CE-0080P-201710 2. Performance Characteristics 2-1. Electro Optical Characteristics ( Tj=85C ) Luminous flux ( lm ) CRI Product code Nominal CCT Ra R9 Tj=85C Efficacy ( lm/W ) Tc=25C** Voltage ( V) Forward Current ( mA ) Thermal Resistance Rj-c ( C/W ) Min. Min. Min. Typ. Typ. Typ. Min. Typ. Max. CLU058-1825C4-27*M2M2-F1 2700K 80 0 14,793 16,811 18,353 146 2,250 47.0 51.1 55.2 0.13 CLU058-1825C4-30*M2M2-F1 3000K 80 0 15,424 17,528 19,135 152 2,250 47.0 51.1 55.2 0.13 CLU058-1825C4-35*M2M2-F1 3500K 80 0 15,695 17,836 19,472 155 2,250 47.0 51.1 55.2 0.13 CLU058-1825C4-40*M2M2-F1 4000K 80 0 15,822 17,980 19,629 156 2,250 47.0 51.1 55.2 0.13 CLU058-1825C4-50*M2M2-F1 5000K 80 0 16,008 18,191 19,859 158 2,250 47.0 51.1 55.2 0.13 CLU058-1825C4-57*M2M2-F1 5700K 80 0 16,168 18,373 20,058 160 2,250 47.0 51.1 55.2 0.13 CLU058-1825C4-65*M2M2-F1 6500K 80 0 16,297 18,520 20,218 161 2,250 47.0 51.1 55.2 0.13 CLU058-1825C4-30AL7M4-F1 3000K 70 - 16,337 18,565 20,267 161 2,250 47.0 51.1 55.2 0.13 CLU058-1825C4-40AL7M4-F1 4000K 70 - 16,790 19,080 20,830 166 2,250 47.0 51.1 55.2 0.13 CLU058-1825C4-50AL7M4-F1 5000K 70 - 16,961 19,274 21,041 168 2,250 47.0 51.1 55.2 0.13 Notes : 1. Citizen Electronics maintains a tolerance of 10% on luminous flux measurements. 2. Citizen Electronics maintains a tolerance of 3% on forward voltage measurements. 3. Citizen Electronics maintains a tolerance of 1 on Ra measurements. * : 2 = 2-step MacAdam ellipse , 3 = 3-step MacAdam ellipse ** : Values of Luminous flux at Tc=25C are provided as reference only. 2-2. Absolute Maximum Ratings Parameter Symbol Rating Input Power (W) Forward Current (mA) Reverse Current (mA) Operating Temperature (C) Storage Temperature (C) Case Temperature (C) Junction Temperature (C) Pi If Ir Top Tst Tc Tj 364.8 *1 5750 *1 1 -40 ~ +100 -40 ~ +100 120 *2 150 *3 *1. Input power and forward current are the values when the LED is used within the range of the derating curve in this data sheet. *2. Refer to 3. Outline drawing for Tc measurement point. *3. D.C. Current : Tj = Tc + Rj-c x Pi 3 Ref.CE-0080P-201710 2-3. Chromaticity Characteristics ( Rated current, Tj=85C ) Oval parameter Color Region 3-step MacAdam Ellipse. 2-step MacAdam Ellipse. Color Region ANSI C78. 377:2011 Nominal CCT Center Point ( x, y ) 2,700K ( 0.4577 , 0.4098 ) 3-step 0.00774 2-step 0.00516 3-step 0.00411 2-step 0.00274 3,000K ( 0.4339 , 0.4032 ) 0.00834 0.00556 0.00408 0.00272 53.17 3,500K ( 0.4078 , 0.3929 ) 0.00951 0.00634 0.00417 0.00278 52.97 4,000K ( 0.3818 , 0.3796 ) 0.00939 0.00626 0.00402 0.00268 54.00 5,000K ( 0.3446 , 0.3551 ) 0.00822 0.00548 0.00354 0.00236 59.62 5,700K ( 0.3287 , 0.3417 ) 0.00760 0.00507 0.00296 0.00198 59.46 6,500K ( 0.3123 , 0.3283 ) 0.00669 0.00446 0.00285 0.00190 58.38 Nominal CCT Center Point ( x, y ) 3,000K ( 0.4339 , 0.4032 ) 0.4561 0.4259 0.4302 0.4171 0.4149 0.3820 0.4373 0.3892 4,000K ( 0.3818 , 0.3796 ) 0.4003 0.4034 0.3737 0.3879 0.3671 0.3583 0.3895 0.3708 5,000K ( 0.3446 , 0.3551 ) 0.3550 0.3752 0.3375 0.3619 0.3366 0.3372 0.3514 0.3480 Major Axis a Minor Axis b Ellipse Rotation Angle 57.28 ANSI parameter a ( x, y ) b ( x, y ) c ( x, y ) d ( x, y ) * Color region stay within 3-step / 2-step MacAdam ellipse from the chromaticity center. * The chromaticity center refers to ANSI C78.377:2011. * is the angle between the major axis of the ellipse and the x-axis, and a and b are the major and minor semi-axes of an ellipse. ( Ref. IEC 60081:1997 AnnexD ) x-y chart CIE1931 0.45 3,000K 2,700K 3,500K Black Body Locus 4,000K 0.40 y 5,000K 5,700K 6,500K 0.35 ANSI 2-step 3-step 0.30 0.30 0.35 0.40 x 0.45 0.50 Note : Citizen Electronics maintains chromaticity ( x, y ) +/-0.005 4 Ref.CE-0080P-201710 3. Mechanical Dimensions Unit : mm Tolerances unless otherwise specified : +/-0.3 Internal Circuit Marking 1 : Serial No. Marking 2 : T 18 25 ** ** Protection device CRI Anode Cathode CCT LED device Dies count in parallel Dies count in series 18 s 25 p Ver.6 5 Ref.CE-0080P-201710 4. Characteristic Curves 4-1. Forward Current Characteristics / Temperature Characteristics Forward Current vs. Forward Voltage Forward Current vs. Relative Luminous Flux Tc=25C Tc=25C 65.0 Relative Luminous Flux [a.u.] 250% Vf [V] 60.0 55.0 50.0 45.0 40.0 200% 150% 100% 50% 0% 0 1500 3000 4500 6000 0 1500 If [mA] 6000 Case Temperature vs. Relative Luminous Flux If=2250mA If=2250mA Relative Luminous Flux [a.u.] 120% 54.0 Vf [V] 4500 If [mA] Case Temperature vs. Forward Voltage 55.0 3000 53.0 52.0 51.0 50.0 100% 80% 60% 40% 20% 0% 49.0 0 25 50 75 Tc [C] 100 0 125 25 50 75 Tc [C] 100 125 6 Ref.CE-0080P-201710 4-2. Optical Characteristics Spectrum : CRI(Ra) 80Min. 6500K 5700K 5000K 4000K Tj=85C If=2250mA 3000K 2700K 3500K 100% 90% Radiative Intensity 80% 70% 60% 50% 40% 30% 20% 10% 0% 380 430 480 530 580 630 Wave length [nm] 730 Tj=85C Spectrum : CRI(Ra) 70Min. 5000K 680 4000K 780 If=2250mA 3000K 100% 90% Radiative Intensity 80% 70% 60% 50% 40% 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wave length [nm] 7 Ref.CE-0080P-201710 4-2. Optical Characteristics (continued) Radiation Characteristic -40 -30 -20 -10 100% -50 10 20 30 40 50 80% -60 -70 60% 60 40% 70 X 20% -80 Y -90 80 90 0% 4-3. Derating Characteristics Case Temperature vs. Allowable Forward Current 7000 6000 If [mA] 5000 4000 3000 2000 1000 0 0 25 50 75 Tc [C] 100 125 8 Ref.CE-0080P-201710 5. Reliability 5-1. Reliability Test Test Item Test Condition IF=2250mATa=25C (with Al-fin) x1000hrs Continuous Operation Test IF=2250mA Tj=150C (with Al-fin) x1000hrs Low Temperature Storage Test -40 C x 1000 hours High Temperature Storage Test 100 C x 1000 hours Moisture-proof Test 85 C, 85 %RH for 500 hours Thermal Shock Test -40 C x 30 minutes - 100 C x 30 minutes, 100 cycle 5-2. Failure Criteria ( Tc=25C ) Measuring Item Symbol Measuring Condition Failure Criteria Forward Voltage Vf If=2250mA >U x 1.1 Total Luminous Flux v If=2250mA <S x 0.85 U defines the upper limit of the specified characteristics. S defines the initial value. Note : Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be return to the normal ambient conditions after the completion of each test. 9 Ref.CE-0080P-201710 6. Packing Specification 6-1. Packing An empty tray is placed on top of a 6-tier tray which contain 20 pieces each. (Smallest packing unit: 120 pieces) A label with product name, quantity and lot number is placed on the upper empty tray. Tray (Dimensions: 310 x 210 x 12 mm / Materials: Electrically conductive PS) Unit : mm Product 20 pcs/tray Example of indication label 1. TYPE e.g. CLU058-1825C4 2. P.No. ( Cutomer's P/N ) 3. Lot No. e.g. CUSTOMER TYPE P.NO Lot No Q'ty : CLU***-******-******* : ****** : ******* : *** --- ( 1 ) --- ( 2 ) --- ( 3 ) --- ( 4 ) 1 7 1 5 0 0 1 (1) (2) (3) (1) Last two digit of the year (2) Production month 17 : Year 2017 1 : January Note: October, November and December are designated X,Y and Z. (3) CE's control number 4. Quantity 10 Ref.CE-0080P-201710 7. Precaution 7-1. Handling with care for this product -Both the light emitting area and white rim around the light emitting area is composed of resin materials. Please avoid the resin area from being pressed, stressed, rubbed, come into contact with sharp metal nail (e.g. edge of reflector part) because the function, performance and reliability of this product are negatively impacted. -Please be aware that this product should not come into contact with any other parts while incorporating in your lighting apparatus or your other products. -Please be aware that careful handling is required after the attachment of lead wires to prevent the application of any load to the connections. -For more information, please refer to application note "Instruction Manual(COB LED Package)". 7-2. Countermeasure against static electricity -Handling of this product needs countermeasures against static electricity because this is a semiconductor product. -Please take adequate measures to prevent any static electricity being produced such as the wearing of a wristband or anti-static gloves when handling this product. -Every manufacturing facility in regard to the product (plant, equipment, machine, carrier machine and conveyance unit) should be connected to ground and please avoid the product to be electric-charged. -ESD sensitivity of this product is over 1,000V (HBM, based on JEITA ED-4701/304). -After assembling the LEDs into your final product(s), it is recommended to check whether the assembled LEDs are damaged by static electricity (electrical leak phenomenon) or not. -It is easy to find static damaged LED dies by a light-on test with the minimum current value. 7-3. Caution of product assembly -Regarding this product assembling on the heat sink, it is recommended to use M3 screw. It might be good for screw tightening on the heat sink to do temporary tightening and final tightening. In addition, please don't press with excess stress on the product. -The condition of the product assembling on the heat sink and the control of screw tightening torque needs to be optimized according to the specification of the heat sink. -Roughness, unevenness and burr of surface negatively impact thermal bonding between the product and heat sink and increase heat thermal resistance between them. Confidence of thermally and mechanical coupling between the product and heat sink are confirmed by checking the mounting surface and measuring the case temperature of the product. -In order to reduce the thermal resistance at assembly, it might be good to use TIM (Thermal Interface Material) on whole contact surface of the product. In case of using thermal grease for the TIM, it might be good to apply uniformly on the contact surface of the product. In case of using thermal sheet for the TIM, it might be good to make sure that the product is NOT strained by stress when the screws are tightened for assembly. -For more information, please refer to application note "Instruction Manual(COB LED Package)". 11 Ref.CE-0080P-201710 7-4. Thermal Design -The thermal design to draw heat away from the LED junction is most critical parameter for an LED illumination system. High operating temperatures at the LED junction adversely affect the performance of LED's light output and lifetime. Therefore the LED junction temperature should not exceed the absolute maximum rating in LED illumination system. -The LED junction temperature while operation of LED illumination system depends upon thermal resistance of internal LED package (Rj-c), outer thermal resistances of LED package, power loss and ambient temperature. Please take both of the thermal design specifications and ambient temperature conditions into consideration for the setting of driving conditions. -For more information, please refer to application note "Thermal Management", "Instruction Manual(COB LED Package)". 7-5. Driving Current -A constant current is recommended as an applying driving current to this product. In the case of constant voltage driving, please connect current-limiting resistor to each products in series and control the driving current to keep under the absolute maximum rating forward current value. -Electrical transient might apply excess voltage, excess current and reverse voltage to the product(s). They also affect negative impact on the product(s) therefore please make sure that no excess voltage, no excess current and no reverse voltage is applied to the product(s) when the LED driver is turn-on and/or turn-off. -For more information, please refer to application note "Driving", "Instruction Manual(COB LED Package)". 7-6. Lighting at a minimum current value -A minimum current value of lighting of all dice is 125mA. When a minimum current is applied, LED dice may look different in their brightness due to the individual difference of the LED element, and it is not a failed product. 7-7. Electrical Safety -This product is designed and produced according to IEC 62031:2008 (IEC 62031:2008 LED modules for general lighting. Safety specification) -Dielectric voltage withstand test has been conducted on this product to see any failure after applying voltage between active pads and aluminum section of the product, and to pass at least 500V. -Considering conformity assessment for IEC62031:2008, almost all items of the specification depend upon your final product of LED illumination system. Therefore, please confirm with your final product for electrical safety of your product. As well, the products comply with the criteria of IEC62031:2008 as single LED package. 12 Ref.CE-0080P-201710 7-8. Recommended soldering Condition (This product is not adaptable to reflow process.) -For manual soldering Please use lead-free soldering. Soldering shall be implemented using a soldering bit at a temperature lower than 350C, and shall be finished within 3.5 seconds for one land. No external force shall be applied to resin part while soldering is implemented. Next process of soldering should be carried out after the product has return to ambient temperature. Contacts number of soldering bit should be within twice for each terminal. * Citizen Electronics cannot guarantee if usage exceeds these recommended conditions. Please use it after sufficient verification is carried out on your own risk if absolutely necessary. -For more information, please refer to application note "Instruction Manual(COB LED Package)". 7-9. Eye Safety -The International Electrical Commission (IEC) published in 2006 IEC 62471 "2006 Photobiological safety of lamps and lamp systems " which includes LEDs within its scope. When sorting single LEDs according to IEC 62471, almost all white LEDs can be classified as belonging to either Exempt Group (no hazard) or Risk Group 1 (low risk). -However, Optical characteristics of LEDs such as radiant flux, spectrum and light distribution are factors that affect the risk group determination of the LED, and especially a high-power LED, that emits light containing blue wavelengths, might have properties equivalent to those of Risk Group 2 (moderate risk). -Great care should be taken when directly viewing an LED that is driven at high current, has multiple uses as a module or when focusing the light with optical instruments, as these actions might greatly increase the hazard to your eyes. -It is recommended to regard the evaluation of stand-alone LED packages as a reference and to evaluate your final product. 7-10. This product is not designed for usage under the following conditions. If the product might be used under the following conditions, you shall evaluate its effect and appropriate them. In places where the product might: -directly and indirectly get wet due to rain and/or at place with the fear. -be damage by seawater and/or at place with the fear -be exposed to corrosive gas (such as Cl2, H2S, NH3, SOx, NOx and so on) and/or at place with the fear. -be exposed to dust, fluid or oil and/or at place with the fear. 13 Ref.CE-0080P-201710 Precautions with regard to product use (1) This document is provided for reference purposes only so that CITIZEN ELECTRONICS' products are used as intended. CITIZEN ELECTRONICS neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of CITIZEN ELECTRONICS or any third party with respect to the information in this document. (2) All information included in this document such as product data, diagrams, charts, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document, please confirm the latest product information with a CITIZEN ELECTRONICS' sales office, and formal specifications must be exchanged and signed by both parties prior to mass production. (3) CITIZEN ELECTRONICS has used reasonable care in compiling the information included in this document, but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. (4) Absent a written signed agreement, except as provided in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or no infringement. (5) Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability, products can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards to minimize risk and avoid situations in which a malfunction or failure of a product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. In addition, customers are also responsible for determining the appropriateness of use of any information contained in this document such as application cases not only with evaluating by their own but also by the entire system. CITIZEN ELECTRONICS assumes no liability for customers' product design or applications. (6) Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding the information contained in this document, or if you have any other inquiries. CITILED is a registered trademark of CITIZEN ELECTRONICS CO., LTD. Japan 14 Ref.CE-0080P-201710 is a trademark or a registered trademark of CITIZEN ELECTRONICS CO., LTD. JAPAN. 15 Ref.CE-0080P-201710