REVISION N ZF5S-XX-XX-XX-WT-X-XX OPTION -TR: TAPE AND REEL (SEE SHEET 4, FIG 3) No OF POSITIONS -04 THRU -50 (USE ZF5-XX AND ZF5C-XX-XX) DO NOT SCALE FROM THIS PRINT OPTION -K: KAPTON PAD (N/A IN -03 LEAD STYLE) (USE K-DOT-.118-.219-.005) (SEE SHEET 5, FIG 4) LEAD STYLE -01: USE C-297-01-X -02: USE C-298-01-X -03: USE C-297-02-X & C-298-02-X C WELD TAB USE WT-60-01-T ((No OF POS -1) x .0197[.500]) .004[0.10] WT-60-01-T C .0197 0.500 (TOL NON-ACCUM) ZF5-20 PLATING SPECIFICATION -T: PURE TIN, MATTE FINISH .008 0.20 REF .033 0.84 01 .190 4.82 REF ZF5C-20-01 FIG 1 ZF5-20-01-X-WT SHOWN (WITH CAM CLOSED) ((No OF POS x .0197[.500]) + .222[5.65]) REF +4 90 - 2 .079 2.00 REF .083 2.10 C SEE TABLE 1 (SEE NOTE 4) SEE NOTE 8 NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. MAXIMUM BURR ALLOWANCE: .0010[.025] 3. MINIMUM PUSHOUT FORCE: 6 OZ. 4. CO-PLANARITY INCLUDES TAILS AND WELD TABS. 5. WELD TAB RETENTION: 6 OZ. 6. BREAKOFF BURR NOT TO EXCEED .007[0.18] AND MUST REMAIN ATTACHED. 7. PIN 1 TO HAVE ORIENATATION AS SHOWN. C 8. VOIDS TO BE RAN AT VENDOR'S DISCRETION. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01[0.3] 2 .XXX: .005[0.13] .XXXX: .0020[0.051] MATERIAL: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING HOUSING: LCP, COLOR: NATURAL CAM SLIDER: LCP, COLOR: BLACK CONTACT: PHOS BRONZE WELD TAB: BRASS MAX FLASH ALLOWED: .002 MAX GATE VESTIGE: .002 F:\DWG\MISC\MKTG\ZF5S-XX-XX-XX-WT-X-XX-MKT.SLDDRW SHEET SCALE: 6:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: ZERO INSERTION FORCE .5mm ASSEMBLY DWG. NO. ZF5S-XX-XX-XX-WT-X-XX BY: G PURVIS 01/20/2011 SHEET 1 OF 5 REVISION N WT-60-01-T (2 PLCS) C .123 3.12 REF .156 3.96 .075 1.91 REF .083 2.10 REF .175 4.45 -01 LEAD STYLE C IN PROCESS 2 IN PROCESS 1 FILL WT-60-01-X (SOME FEATURES REMOVED FOR CLARITY) FILL C-297-01-X ZF5C-XX-XX C "A" .156 3.97 .006 0.14 .076 1.92 REF "A" ((No OF POS X .0197[.500]) 10.60 + .025[.64]) .002[.05] C -02 LEAD STYLE SECTION "A"-"A" IN PROCESS 3 IN PROCESS 1 INSERT ZF5C-XX-XX (CAM SHOWN IN CLOSED POSITION) FILL C-298-01-X PACKAGING VIEWS (-TR OPTION SHOWN ON SHEET 4) [PARTS TO HAVE POSITION #1 LOADED IN SAME DIRECTION AS ARROW ON TUBE] PT-1-24-02-117 PT-1-24-02-117 PT-1-24-02-117 F:\DWG\MISC\MKTG\ZF5S-XX-XX-XX-WT-X-XX-MKT.SLDDRW PROPRIETARY NOTE -01 LEAD STYLE (USE TP-24-02 PLUG) -02 LEAD STYLE (USE TP-24-02 PLUG) -03 LEAD STYLE (USE TP-24-02 PLUG) THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 10:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: ZERO INSERTION FORCE .5mm ASSEMBLY DWG. NO. ZF5S-XX-XX-XX-WT-X-XX BY: G PURVIS 01/20/2011 SHEET 2 OF 5 REVISION N FIG 2 APPLICATION VIEWS -03 LEAD STYLE (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (ZF5-20-03-T-WT SHOWN) C-297-02-X -01 LEAD STYLE SHOWN (WITH CAM OPEN) 01 SEE NOTE 7 C C-298-02-X -02 LEAD STYLE SHOWN (WITH CAM OPEN) .194 4.92 .118 3.00 .1790 4.55 C C .1790 4.55 C -03 LEAD STYLE SHOWN (WITH CAM OPEN) F:\DWG\MISC\MKTG\ZF5S-XX-XX-XX-WT-X-XX-MKT.SLDDRW PROPRIETARY NOTE .095 2.42 REF -03 LEAD STYLE IN PROCESS 1A FILL C-298-02-X (SAME AS IN PROCESS 1 FOR -01 LEAD STYLE EXCEPT AS SHOWN) (ODD POSITIONS FILLED ONLY) .096 2.44 REF -03 LEAD STYLE IN PROCESS 1B FILL C-297-02-X (SAME AS IN PROCESS 1 FOR -01 LEAD STYLE EXCEPT AS SHOWN) (EVEN POSITIONS FILLED ONLY) THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 5:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: ZERO INSERTION FORCE .5mm ASSEMBLY DWG. NO. ZF5S-XX-XX-XX-WT-X-XX BY: G PURVIS 01/20/2011 SHEET 3 OF 5 FIG 3 -TR OPTION REVISION N -01 LEAD STYLE -03 LEAD STYLE -02 LEAD STYLE SHOWN WITH -K OPTION SHOWN WITH -K OPTION ROUND HOLES ROUND HOLES ROUND HOLES POS 1 POS 1 POS 1 .472 12.00 REF OBLONG HOLES .472 12.00 REF .472 12.00 REF OBLONG HOLES OBLONG HOLES USER DIRECTION OF UN-REELING POCKET NOT DETAILED USER DIRECTION OF UN-REELING POCKET NOT DETAILED USER DIRECTION OF UN-REELING POCKET NOT DETAILED PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: ZERO INSERTION FORCE .5mm ASSEMBLY DWG. NO. F:\DWG\MISC\MKTG\ZF5S-XX-XX-XX-WT-X-XX-MKT.SLDDRW ZF5S-XX-XX-XX-WT-X-XX BY: G PURVIS 01/20/2011 SHEET 4 OF 5 REVISION N FIG 4 KAPTON PAD (USE K-DOT-.118-.219-.005) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) -01 LEAD STYLE -02 LEAD STYLE .016 0.41 C "S" .020[0.51] .118 3.00 REF "R" REF NOTE: "R" = OVERALL LENGTH "S" = {("R" -.118[3.00] / 2} .020[.51] .087 2.22 (INCL K DOT) .016 0.41 C .087 2.22 (INCL K DOT) "S" .020[0.51] .118 3.00 REF "R" REF PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 4:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: ZERO INSERTION FORCE .5mm ASSEMBLY DWG. NO. F:\DWG\MISC\MKTG\ZF5S-XX-XX-XX-WT-X-XX-MKT.SLDDRW ZF5S-XX-XX-XX-WT-X-XX BY: G PURVIS 01/20/2011 SHEET 5 OF 5