Datasheet
AC-operated, multi-color, general-purpose indicators
• Rugged, cost-effective, and easy-to-install indicators available in
K50 or K80 housing style
• Illumination provides easy-to-see operator guidance and equipment
status indication
• Compact devices are completely self-contained - no controller
needed
• 85 to 130 V ac operation
• Displays 3 colors
• Immune to ambient light, EMI, and RFI interference
QPMA
E
U
R
O
-
S
T
Y
L
E
•
P
I
G
T
A
I
L
•
P
U
R
•
C
A
B
L
E
C
A
L
L
F
A
C
T
O
R
Y
Contact Banner Engineering for more information.
Models
Model Construction Connection1LED Function2Inputs
K50LGRYA120Q 50 mm dome/ 30 mm
mount polycarbonate 5-pin Micro QD 3 Color: Green, Red,
Yellow 85 to 130 V ac
K80LGRYA120Q 50 mm dome/Flat or
DIN-mount
polycarbonate
Specifications
Supply Voltage and Current
85 to 130 V ac at 15 mA max.
Supply Protection Circuitry
Protected against transient voltages
Indicators
LEDs are independently selected: Green, Red, or Yellow.
Input Response Time
Indicator ON/OFF: 1 ms max.
Environmental Rating
Rated IEC IP67. K50L models fully encapsulated; K80L has
encapsulated electronics only. K50L QD models meet IP69K, per DIN
40050-9; cabled models also meet IP69K if the cable and cable
entrance are protected from high-pressure spray.
Connections
5-pin Micro-style integral QD (Q), 150 mm (6 in) pigtail QD (QP), or 2
m (6.5 ft) integral cable, depending on model
K80L models: terminal-wired models available for use with bulk cable;
compression fitting optional. Contact Banner Engineering for cable
information.
Operating Conditions
−40 °C to +50 °C (−40 °F to +122 °F)
90% at +55 °C maximum relative humidity (non-condensing)
Certifications
1Integral QD models are listed.
• For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, K50LGRYA120QP).
• For 2 m (6.5 ft) PVC cable, omit suffix Q from model number (example, K50LGRYA120).
• A model with a QD requires a mating cable (see Cordsets on page 3)
2Contact Banner Engineering for other colors and color combinations.
EZ-LIGHT® Indicators—85 to 130 V ac
Original Document
134548 rev. B 26 January 2015
134548
Dimensions
K50L K80L
50.0 mm
(1.97")
38 mm (1.50")*
20 mm (0.79")
11 mm (0.43")
M30 x 1.5
(mounting nut
included)
Internal Threads
½ - 14 NPSM
Max. Torque 4.5 Nm
(40 in-lbf)
Max. Torque 2.25 Nm
(20 in-lbf)
109.5 mm
(4.31")
80.8 mm
(3.18")
66.3 mm
(2.61")
26.0 mm
(1.02")
M12 X 1
65.0 mm
(2.56")
65.0 mm
(2.56")
4X 8–32 UNC
Max. Torque 1.12 Nm (10 in–lbf)
4X Ø 5.5 mm (Ø 0.22")
Max. Torque 1.12 Nm (10 in–lbf)
with supplied screws
Internal Threads ½ - 14 NPSM
Max. Torque 2.25 Nm (20 in–lbf)
Wiring
Cabled Models QD Models Key:
1 = Brown
2 = White
3 =Yellow
4 = Black
5 = Blue
G = Green
R = Red
Y = Yellow
X = V ac Neutral
Z = Input 85 to 130V
ac
N.C. = Not Used
EZ-LIGHT® Indicators—85 to 130 V ac
2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 134548 rev. B
Accessories
Cordsets
5-Pin Micro-Style Cordsets with Shield
Model Length Style Dimensions Pinout (Female)
MQVR3S-506 1.83 m (6 ft)
Straight
42 Typ.
ø 14.5
1/2-20 UNF-28
3
2
5
1
4
1 = Brown
2 = White
3 = Yellow
4 = Black
5 = Blue
MQVR3S-515 4.57 m (15 ft)
MQVR3S-530 9.14 m (30 ft)
MQVR3S-506RA 1.83 m (6 ft)
Right Angle
38 mm max.
1/2-20UNF-2B
ø 15 mm
38 mm
max.
MQVR3S-515RA 4.57 m (15 ft)
MQVR3S-530RA 9.14 m (30 ft)
Brackets
All measurements are listed in millimeters, unless noted otherwise.
SMB30A
• Right-angle bracket with
curved slot for versatile
orientation
• Clearance for M6 (¼ in)
hardware
• Mounting hole for 30 mm
sensor
• 12-ga. stainless steel
45
61
69
A
B
C
Hole center spacing: A to B=40
Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5
SMB30SC
• Swivel bracket with 30 mm
mounting hole for sensor
• Black reinforced
thermoplastic polyester
• Stainless steel mounting and
swivel locking hardware
included
67
58
29
B
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
SMB30FA
• Swivel bracket with tilt and
pan movement for precise
adjustment
• Mounting hole for 30 mm
sensor
• 12-ga. 304 stainless steel
• Easy sensor mounting to
extrude rail T-slot
• Metric and inch size bolt
available
Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 -
1.5 x 50
Hole size: B= ø 30.1
SMBAMS30P
• Flat SMBAMS series bracket
• 30 mm hole for mounting
sensors
• Articulation slots for 90°+
rotation
• 12-ga. 300 series stainless
steel
45
93 A
C
B
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
EZ-LIGHT® Indicators—85 to 130 V ac
P/N 134548 rev. B www.bannerengineering.com - Tel: +1-763-544-3164 3
SMB30MM
• 12-ga. stainless steel bracket
with curved mounting slots
for versatile orientation
• Clearance for M6 (¼ in)
hardware
• Mounting hole for 30 mm
sensor
70
57
A
B
C
57
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
SMBAMS30RA
• Right-angle SMBAMS series
bracket
• 30 mm hole for mounting
sensors
• Articulation slots for 90°+
rotation
• 12-ga. (2.6 mm) cold-rolled
steel
53
48
45
A
C
B
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
For K80L
SMBDX80DIN
Black reinforced thermoplastic
Bracket for mounting on a 35
mm DIN rail
89
89
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following
the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture
which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty
does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR
IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR
TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO
EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR
ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE
PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,
NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any
obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.
EZ-LIGHT® Indicators—85 to 130 V ac
www.bannerengineering.com - Tel: +1-763-544-3164