7,40 0,30 0,291 0,012 1,00 0,20 0,039 0,008 DETAIL A 3 : 1 IMPROVED CONTACT DESIGN (PRE BEND) DETAIL B 3 : 1 2,20 0,50 0,087 0,020 109,210,13 4,300 0,005 3,30 0,130 MAX 115,06 4,530 7 x 13.97[0.550 ]= 97,79 3,850 28,50 1,122 MAX 8 8 1 8 1 1 8 1 8 1 8 1 8 8 1 1 8 8 1 1 8 8 1 1 8 1 8 1 8 3,20 0,30 0,126 0,012 1 1 25,50 1,004 8 MAX A B 10,89 0,429 T e chnical spe cif icat io ns NOTE NOTE NOTE NOTE Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Stan d ard ap p l i c . Val u e T e st Data Stand ard ap p l i c . Val u e Mate ri al s & F i n i sh Me c han i c al p ro p e rti e s Standard description PA 66 Insulation body max. 20 N Insertion/withdrawal force IEC 603-7 Standard description C5210 (acc. JIS) Contact material min. 1.000 IEC 512-5, 9a Mechanical operations Thickness of plating 30 in Au over 50 in Ni Contact finish, mating zone Effectiveness of connector Contact finish termination zone Thickness of plating 80 in matte Sn over 50 in Ni 50 N co upli ng de vice IEC 512-8, 15f Standard de scriptio n C2680 (acc JIS) She ll/shi e ld mate ri al El e c tri c al p ro p e rti e s Thickness of plating 50 in Ni Shell/shield plating Cre e p ag e / c l e aran c e d i stan c e s 0,52 mm IEC 807-3 a) Contact - contact A sse mb l y p ro c e ss min. 1, 0 mm IEC 807-3 b) Co ntact - she ll T ray P ackagi ng ) e tag l Vo d stan th Vo l tag e p ro o f (Di e l e c tri c Wi 235C at 10s So lde r te mpe rature mi n. 1.000 V AC/DC IEC 512-2, 4a a) Co ntact - co ntact wave Sui table asse mbly pro ce ss min. 1.500 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a 1,5 A @ 25 C IEC 512-3, 5b Current carrying capacity A p p ro v al s max. 30 mOhm IEC 512-2, 2a Co ntact re si stance V0 UL 94 UL insulatio n bo dy mi n. 500 MOhm IEC 512-2, 3a Insulati o n re sistance E145613 UL Fi le N o . En v i ro n me ntal p ro p e rti e s Yes Ro HS co mpliant 0 - 70 C Ope rati o n te mpe rature 1: 2: 3: 4: BOTTOM, SIDES - 4 FLANGES (GF10) PANEL GROUND FLANGES, TOP, REAR GROUNDING PIN BETWEEN EVERY OTHER PORT (P) EACH SIDE; STAGGERED (S1) 3 SIDE GROUND PINS RoHS COMPLIANT Scale Tolerances Information: 2:1 All Dimensions in mm[in] Designation All rights reserved. Subject to modification without Only for Information. prior notice. To insure that this is the latest Drawing will not be updated. version of this drawing, please contact one of the ERNI companies before using. www.ERNI.com H 26.06.2007 Index Date Class MOD JACK - MJD 8P8C, 2 x 8, CAT5 133035 MJ (1/2) A3 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 116,160,20 4,573 0,008 107,95 4,250 96,52 3,800 0,38 0,10 0,015 0,004 80,01 3,150 68,58 2,700 66,04 2,600 52,07 2,050 26,16 1,030 93,98 3,700 TOP OF PCB LP 40,64 1,600 38,10 1,500 24,13 0,950 12,70 0,500 9,15 0,360 1 8 8 1 8 8 8 8 1 1 8 8 8 1 8 1 8 1 8 8 1 8 11,40 0,449 1 1 8 1 1 0,89 0,07 0,035 0,003 x128 3,25 0,07 0,128 0,003 x2 1,60 0,07 0,063 0,003 x10 2,13 0,084 2,13 0,084 2,79 0,110 109,21 4,300 1 : 1 2,79 0,110 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 17,19 0,677 15,46 0,609 8 1 1 5,85 0,230 1 1 8,89 0,350 1,27 0,050 2,54 0,100 2,54 0,100 2,54 0,100 4,57 0,180 10,16 0,400 Tolerances Information: Scale 2:1 All Dimensions in mm [in] Designation All rights reserved. Subject to modification without Only for Information. prior notice. To insure that this is the latest Drawing will not be updated. version of this drawing, please contact one of the ERNI companies before using. www.ERNI.com Index Date Class MOD JACK - MJD 8P8C, 2 x 8, CAT5 133035 MJ (2/2) A3