QD-25-BK - BRADY - Product.Network

Circuit Board Solder Masks

238

www.bradyid.com

Quick-Dots™Markers

QUICK-DOTS MARKERS /CIRCUIT BOARD SOLDER MASKS

CUSTOM AND SPECIALTY PRODUCTS

䊳These 0.250” (6.35 mm) diameter adhesive dots come furnished on dispenser cards

䊳Available in 9 stock colors

䊳Custom sizes and shapes are available. Please consult factory for ordering

information: 1-888-272-3946

Vinyl (B-725)

Part Pieces

Number Color Per Card

QD-25-BK Black 144

QD-25-BL Blue 144

QD-25-BR Brown 144

QD-25-DG Dark Green 144

QD-25-LG Light Green 144

QD-25-OR Orange 144

QD-25-RD Red 144

QD-25-WT White 144

QD-25-YL Yellow 144

䊳Designed to withstand high-temperature applications where clean removal is necessary

䊳1 mil polyimide film does not leave any adhesive residue

High-Temperature Removable Polyimide (B-654)

Part Markers Diameter of Circle

Number Per Card Inch (mm)

CMKC-187 144 0.187 (4.75)

CMKC-250 144 0.235 (5.97)

CMKC-375 72 0.375 (9.53)

CMKC-500 54 0.500 (12.70)

CMCK-187 and CMCK-250 do not have zip strips.

275

www.bradyid.com

Master Materials Chart

REFERENCE

MASTER MATERIALS CHART

Brady

Material # Material Color Temp. Range Print Technology Properties & Applications

B-693 Metallized Silver -40°F to 248°F Dot Matrix Low-cost metallized identification or rating plate material. It exhibits good

Polyester (-40°C to 120°C) smudge, solvent, and heat resistance.

B-702 Vinyl-Coated White -40°F to 221°F Pre-Printed High adhesion; good conformability; low profile; resistant to oil and mild solvents.

Polyester (-40°C to 105°C) Thermal Transfer Environments containing oil or mild solvents. Ideal for wire marking.

B-707 Polyester White -40°F to 267°F Laser Electronic component labeling; general identification. Rough surface application;

(-40°C to 130°C) Stronger bond to low surface energy plastics.

B-708 Vinyl White -40°F to 150°F Pre-Printed Good strength and conformability. Resistant to oil, mild solvents and water.

(-40°C to 66°C) Environments containing oil, mild solvents or water. Indoor or outdoor use. Excellent

for cable identification.

B-709 Polyester White -40°F to 158°F Laser Applications requiring general purpose permanent and temporary labeling or

(-40°C to 70°C) marking with printable or write-on properties. Leaves no adhesive residue when

removed from PC board.

B-712 Polyester Clear -40°F to 221°F Laser Electronic component labeling; general identification. Rough surface application.

(-40°C to 105°C) Stronger bond to low surface energy plastics.

B-722 Polyester Clear -40°F to 221°F Laser Permanent acrylic-based adhesive. Design for rating and serial plates using

(-40°C to 105°C) alphanumerics, bar codes, graphic symbols, and logos that require name plate

quality. Withstands numerous solvents and can be applied to variable surfaces.

B-725 Vinyl White Up to 176°F Custom Good conformability; dielectric strength. Electrical-grade cable markers.

(Up to 80°C) Quick Dot Markers

B-737 Tedlar White or -40°F to 266°F Laser Self-extinguishing. Meets MIL-M-87958. Applications requiring self-extinguishing,

Yellow (-40°C to 130°C) easily printed cable or wire identification. Aerospace and military cable marking.

Repositionable.

B-747 Polyester White or -40°F to 267°F Laser Electronic PCB component, bar code labels. Excellent solvent and smudge resistant;

Yellow (-40°C to 130°C) and equipment labeling has high-resolution and high temperature performance;

available in white only.

B-759 Paper White -94°F to 193°F Laser Permanent adhesive; smudge resistant. Applications requiring economical, general

(-70°C to 90°C) purpose label. Bar code-printable. Excellent toner adhesion.

B-773 Polyester Silver -85°F to 248°F Laser Permanent acrylic adhesive. Designed for rating and serial plate that utilize

(-65°C to 120°C) alphanumeric, graphic symbols and logos. Electronic component marking. Designed

to withstand numerous solvents and variable temperatures. Adheres to a variety

of surfaces.

B-799 Nylon Cloth White -40°F to 193°F Laser Recommended for applications requiring permanent wire marking or general

(-40°C to 90°C) labeling.

B-841 Polyester White -40°F to 311°F Dot Matrix Print-receptive coating. Resistant to tearing, weathering, abrasion, heat, cold,

(-40°C to 155°C) LS2000 solvents and oil. Tag for outdoor or harsh environments where legibility and

tear-resistance are important.

B-917 Aluminum Foil Silver -40°F to 266°F Dot Matrix Printable; resistant to solvents, high temperatures. Identification and serialized

(-40°C to 130°C) labels, rating plates, general labeling. Full hard aluminum.

B-953 Polyester White -40°F to 266°F Pre-Printed 1-mil low profile polyester film with an acrylic adhesive, designed to identify small

(-40°C to 130°C) electrical or electronic components. Excellent resistance to high temperatures

and solvents. Capable of accepting extremely small print.

B-966 Polyester Clear -94°F to 248°F N/A Release-coated surface. Not printable. Overlaminate for PermaShield™labels.

(-70°C to 120°C) Clear/durable.

B-969 Metallized Silver -94°F to 293°F Dot Matrix Print-receptive topcoat. Rating or serial plate, product information property

Polyester (-70°C to 145°C) ID PRO Plus identification, warranty labels and inventory control labels, electronic component

LS2000 marking. Suitable for printing.

B-999 Polyester Clear -40°F to 320°F Custom Printable. Aircraft tubing identification. Ideal for use as fluid wire tape.

(-40°C to 160°C) No Stock Parts

B-7546 Polyester White -40°F to 175°F Thermal Transfer Tamper evident; leaves "void" footprint when removed.

(-40°C to 80°C)

*These materials are UL recognized.

*These materials are CSA approved.

*Refer to the full page charts on pages 280-281 for more

information and complete listing of parts.