AutomationDirect.com Industrial LCD Display FPM-120 and FPM-120-TS MultiFrequency LCD Monitor Data Sheet The FPM-120 and FPM-120-TS ["TS" designating Touch Screen] are ruggedly built industrial display products suitable for factory floor environments. The mounting bezel is sealed to NEMA specifications and provides a dust and liquid tight seal when installed in a suitable enclosure. The bezel is finished with a tough baked on powder coat that is resistant to scratches and most chemicals. Offering simple installation and easy setup, all FPM-120 series displays are plug compatible with your standard computer video card. Screen setup is simplified by factory pre adjustment usually requiring only fine tuning, from the rear mounted keypad [to avoid tampering]. After setup all video settings are stored in the units non volatile memory and will be retained during power down conditions. The Multi Frequency capability of the FPM-120 series provides absolute full screen display of VESA (Video Electronic Standards of America) resolutions up to SVGA (800x600), the LCD's native resolution. That is, the unit can also be operated at VGA [640 x 480], due to its microprocessor design. The unit incorporates a high quality 12.1" TFT LCD. The LCD provides an extremely wide viewing angle, and high brightness and contrast, suitable for harsh lighting conditions and off angle viewing. The FPM-120-TS is fitted with a high resolution analog resistive touch screen. The touch screen provides mouse emulation, supporting Click, Double Click, and Click and Drag. For added reliability during operation in high ambient temperature conditions, the unit is fitted with a long life ball bearing fan. The fan reduces stagnant air and hot spots associated with component overheating. In addition to cooling, the fan is fitted with a filter and provides a positive pressure to reduce or eliminate airborne contaminates from entering the unit. Wide Viewing Angle 0.00" Cable Exit Rugged Construction FPM-120(-TS) With our 0.00" cable entry / exit design The ventilated chassis is formed from 16 Ga. (.062) Stainless Steel, for strength and corrosion resistance. For easy service the rear of the unit hinges down and where ever possible aircraft style vibration resistant fasteners are used for assembly. The bezel is milled from .250" thick 6061 Aluminum plate. The radiused edges and corners reduce dust collection and give an attractive look to a very rugged package. Revised And Updated 5-00 General Specifications: Models FPM-120 and FPM-120-TS Liquid Crystal Display (LCD) Display Size / Type / Video Interface 12.1" Diagonal / TFT Active Matrix / Standard VGA HD-15F Connector Active Area 9.69"(h) x 7.25"(v) Pixel Format [VGA; SVGA] 640(h) x 480(v) ; 800(h) x 600(v) Brightness 300 Nits Typical Contrast Ratio 200:1 Viewing Angle (Horizontal) 60 / 60 Viewing Angle (Vertical) 50 / 50 Back Light Life 50,000 Hours (Half Life) Colors Supported 256,000 o o o o Mechanical Construction Bezel Outside Dimension 15"(h) x 12.5"(v) Bezel Material .250" 6061 Aluminum Bezel Finish Black Textured Powder Coat Front End Construction NEMA 4/12 Chassis Depth (Behind Cabinet Door) 4.250" Chassis Construction 16 Gauge Stainless Steel (.059") Environmental Operating Temp. 0-50 C Storage Temp. 0-60 C Operating Humidity 10-95% Non Condensing Storage Humidity 10-95% Non Condensing Electrical Input Voltage 90~264 VAC Auto Switching Input Power 35 Watts Typical Certification CE Pending; UL Pending Touch Screen Analog Resistive 5 Wire Touch Screen Resolution 400 ppi (points per inch) Screen Finish Anti Reflective Chemical Resistance Acetone, MEK, Mineral spirits, Isopropyl alcohol, Methylene chloride Estimated Life >35 Million touches in one location Computer Interface Serial RS-232 (Standard) Electrostatic Protection IEC 801-2 Impact Window Specification Material 0.118 Thick Acrylic Finish Anti-Glare Hard Coat Model FPM-120(-TS) Panel Cut Out and Mounting Information Standard LCD Monitor Information Touch Driver Operating Systems Supported Operating System Ver Windows CE Windows 95/98 Windows NT Windows 2000 2.1 All 4.0 1.0 Comments Monitor & Computer Accessories VEXT-XX VEXT-XX-MM MMEXT-XX VKEXT-XX DKEXT-XX S S S S S High Frequency Video Cable [Male-Female] High Frequency Video Cable [Male-Male] RS-232 Serial Cable [Male-Female] PS/2 Cable (6 Pin Mini DIN) [Male-Female] PC/AT Cable (5 Pin DIN) [Male-Female] XX= Stock Lengths of 25, 50, 75, 100 Feet AutomationDirect.com 3505 Hutchinson Rd Cumming, GA 30040 Telephone 800.633.0405 Fax 770.889.8914 info@AutomationDirect.com