Standard range - 10Vdc to 12kVdc ProtectiCapTM capacitors TCC/VCC capacitors VC1 capacitors PSL capacitors High Q capacitors - MS range Ultra-low ESR capacitors StackiCapTM capacitors Non-magnetic capacitors X8R High Temperature capacitors Open Mode and Tandem capacitors IECQ-CECC & AEC-Q200 ranges S02A Space grade ranges Safety Certified capacitors 250Vac Non Safety rated AC capacitors 115Vac 400Hz capable capacitors High Dielectric Withstand Voltage ranges E01 & E07 feedthrough chip capacitors X2Y Integrated Passive Components Radial Leaded capacitors MLC Capacitors www.syfer.com Introduction to Syfer Technology First in the market with flexible polymer terminations Products - the revolutionary FlexiCapTM capacitors - our Syfer's excellence in ceramic materials technology, has enabled us to offer an unrivalled range of multilayer ceramic products including: capacitor range also includes: ProtectiCapTM, high voltage capacitors, X8R high temperature types, High Q capacitors and other application specific l l types. Our renowned high voltage MLCC expertise l has led to the development of an impressive range l with working voltage capability up to 12kV. This includes surface mount Class `X' and `Y' approved l l l Safety Certified capacitors, 0603 chips with working l voltages up to 500V and 0805 types up to 2kV. l l We are able to offer unrivalled product quality with l short lead-times, backed up by excellent sales and l technical support. With a commitment to product innovation, new ranges are continually being developed. Our experienced applications engineers are also l l Benefits l l l available to provide custom solutions for specific applications. This catalogue details the standard ranges but we can provide items such as tight l l tolerance, low profile and non standard sizes on l request. Flexibility is key, not only in design but in l all aspects of customer service and support. l Our quality management systems meet l international requirements, with approval to Multilayer ceramic chip capacitors High voltage MLCCs ProtectiCapTM capacitors FlexiCapTM capacitors with flexible terminations StackiCapTM capacitors Class `X' and `Y' SMD Safety Certified capacitors Radial leaded capacitors AEC-Q200 qualified capacitors IECQ CECC approved capacitors Capacitors for space applications High Q capacitors Non-magnetic capacitors 3 terminal EMI chips X2Y Integrated Passive Components l l High quality and reliability World-leading high voltage expertise Suitable for the most demanding applications including: automotive, aerospace, military, space and medical Approvals to international specifications Continual product improvement and innovation Tight tolerances available Large case sizes, up to 8060 Custom product capability Strong technical support Short lead-times Environmentally responsible IS0 9001, environmental approval to IS0 14001 Suffix code controlled items such as Low profile, defined thickness and custom lead forms available by special request. and Occupational Health and Safety approval to Other Syfer products OHSAS 18001. Product approvals include, IECQ- l CECC, UL, TUV and qualification to AEC-Q200. l SPC is used extensively, supported by Continuous l Improvement Programmes, 6 Sigma projects and Lean Manufacturing initiatives. l l l l l l Surface mount Pi filters Panel mount threaded filters Panel mount solder-in filters Custom filter assembly capability Varistor filters Discoidal capacitors Planar capacitor and planar varistor arrays EMI Power Filters Hermetically sealed EMI filters www.syfer.com MLCC standard range - 10V to 12kVdc Notes: 1) Capacitance in F - min value above max value. 2) *These parts may require conformal coating post soldering. 3) T = Maximum thickness. 4) Higher capacitance values available from the ProtectiCapTM range - see page 19. 10V 16V 25V 50/63V 100V 200/ 500V 630V 250V 1kV 1.2kV 1.5kV 2kV 2.5kV 3kV 5) StackiCapTM high capacitance versions are now available. Please refer to datasheet. 4kV 5kV 6kV 8kV 10kV 12kV C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ X5R X7R X5R X7R X5R X7R X5R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 0603 0.47p 3.9n 120n 150n 0.47p 2.7n 100p 100n 120n 0.47p 2.2n 100p 100n -- 0.47p 1.5n 100p 47n 56n 68n 0.47p 470p 100p 33n 0.47p 220p 100p 10n 0.47p 100p 150p* 1.5n* 0805 1.0p 15n 390n 680n 1.0p 12n 100p 330n 390n 470n 1.0p 10n 100p 220n 270n 390n 1.0p 5.6n 100p 220n 270n 330n 1.0p 2.2n 100p 100n 1.0p 1n 100p 56n 1.0p 680p 1206 1.0p 47n 1.2 1.5 1.0p 33n 100p 1.0 1.2 1.0p 27n 100p 820n 1.0 1.0p 22n 100p 470n 560n 680n 1.0p 8.2n 100p 330n 1.0p 3.3n 100p 150n 1210 3.9p 100n 1.8 3.3 3.9p 68n 100p 1.5 1.8 2.7 3.9p 56n 100p 1.2 1.5 2.2 3.9p 33n 100p 1.0 1.2 1.5 3.9p 18n 100p 680n 3.9p 8.2n 1808 4.7p 100n 1.8 2.7 4.7p 68n 100p 1.5 1.8 2.2 4.7p 47n 100p 1.2 1.5 4.7p 33n 100p 680n 820n 1.0 4.7p 18n 100p 560n T=2.5mm 10p 220n 3.9 10 10p 180n 150p 3.3 3.9 6.8 10p 150n 150p 2.2 2.7 4.7 10p 100n 150p 2.2 2.7 3.3 10p 47n 1812 -- -- -- -- -- -- -- -- -- -- -- T=2.5mm 10p 470n 5.6 15 10p 330n 220p 4.7 5.6 12 10p 220n 220p 3.9 4.7 10 10p 150n 220p 1.8 1825 -- -- -- -- -- -- -- -- -- 10p 470n 6.8 18 10p 330n 220p 5.6 6.8 12 10p 220n 220p 4.7 5.6 10 T=4.2mm max. -- -- -- -- -- -- -- T=2.5mm 2225 10p 560n 8.2 22 10p 470n 330p 6.8 8.2 15 10p 330n 2225 -- -- -- -- -- 3640 -- -- -- -- 3640 -- -- -- 5550 -- -- -- 1812 T=3.2mm 1825 T=3.2mm 2220 T=2.5mm 2220 T=4.0mm T=2.5mm T=4.0mm T=2.5mm -- 8060 -- -- 8060 -- -- T=2.5mm T=4.0mm -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 0603 100p 15n 1.0p 560p 100p 12n 1.0p 180p 100p 10n 1.0p 120p -- 1.0p 82p -- 1.0p 39p -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 0805 1.0p 2.2n 100p 68n 1.0p 1.5n 100p 47n 1.0p 1.0n 100p 27n 1.0p 680p 100p 15n 1.0p 330p 100p 10n 1.0p 220p 100p 2.2n 1.0p 100p -- 1.0p 68p -- -- -- -- -- -- -- -- -- -- -- -- -- 1206 100p 330n 3.9p 6.8n 100p 150n 3.9p 3.9n 100p 100n 3.9p 2.2n 100p 47n 3.9p 1.5n 100p 18n 3.9p 820p 100p 12n 3.9p 390p 100p 4.7n 3.9p 220p -- 3.9p 150p -- -- -- -- -- -- -- -- -- -- -- -- -- 1210 4.7p 8.2n 100p 270n 4.7p 5.6n 100p 150n 4.7p 3.9n 100p 100n 4.7p 2.2n 100p 47n 4.7p 1.5n 100p 22n 4.7p 1.0n 100p 15n 4.7p 470p 100p 4.7n 4.7p 270p 100p 1.5n 4.7p 180p 100p 1.2n 4.7p 100p 120p* 1.0n* 4.7p 68p* 100p 680p* 4.7p 47p* 100p 390p* -- -- -- -- -- -- 1808 150p 1.5 10p 22n 150p 680n 10p 15n 150p 330n 10p 10n 150p 180n 10p 6.8n 150p 100n 10p 4.7n 150p 33n 10p 2.7n 150p 22n 10p 1.5n 150p 10n 10p 820p 150p 3.3n 10p 560p 150p 2.7n 10p 150p 10p 150p 10p 150p 270p* 2.2n* 180p* 1.2n* 120p* 1.0n* -- -- -- -- -- -- -- -- 27n 1000n 18n 22n 470n 12n 330n 8.2n 180n 5.6n 6.8n -- 3.3n 56n 1.8n -- 1.0n -- 680p -- 330p 390p* -- 220p 270p* -- 150p 180p* -- -- -- -- -- -- -- 2.2 6.8 10p 68n 220p 1.5 10p 33n 220p 1.0 10p 27n 220p 560n 10p 22n 220p 180n 10p 12n 220p 120n 10p 6.8n 220p 68n 10p 4.7n 220p 47n 10p 3.3n 220p 10n 10p 1.5n 220p 6.8n 10p 1.2n 220p 3.9n 10p 560p* 220p 2.2n* 10p 390p* 220p 1.8n* 10p 270p* 220p 1.5n* -- -- -- -- -- -- -- -- -- -- 39n 47n -- 33n -- 27n -- 15n -- 8.2n 10n -- 5.6n 6.8n -- 3.9n -- 1.8n 2.2n -- 1.5n -- 680p* -- 470p* -- 330p* -- -- -- -- -- -- -- 10p 150n 220p 3.3 3.9 6.8 10p 68n 220p 2.2 10p 33n 220p 1.0 10p 22n 220p 560n 10p 18n 220p 330n 10p 15n 220p 120n 10p 10n 220p 82n 10p 5.6n 220p 47n 10p 3.3n 220p 27n 10p 1.8n 220p 8.2n 10p 1.5n 220p 6.8n 10p 220p 10p 220p 10p 220p 680p* 4.7n* 470p* 3.9n* 330p* 2.2n* -- -- -- -- -- -- -- -- -- -- -- -- 39n 56n 2200n 27n 39n 1000n 22n 33n 1000n 18n 22n 470n 12n 15n 220n 6.8n 10n 150n 3.9n 5.6n 100n 2.2n 3.3n -- 1.8n 2.2n -- 820p 1.2n* -- 560p 820p* -- 390p 560p* -- -- -- -- -- -- -- 330p 5.6 6.8 12 10p 220n 330p 3.3 3.9 10 10p 82n 330p 2.7 10p 47n 330p 1.5 10p 33n 330p 820n 10p 22n 330p 390n 10p 18n 330p 150n 10p 12n 330p 100n 10p 6.8n 330p 68n 10p 4.7n 330p 33n 10p 2.2n 330p 12n 10p 1.8n 330p 8.2n 10p 820p* 330p 5.6n* 10p 560p* 330p 4.7n* 10p 390p* 330p 2.7n* -- -- -- -- -- -- -- -- -- -- -- -- -- -- 56n 68n -- 39n 47n -- 27n 39n -- 22n 27n -- 15n 22n -- 8.2n 12n -- 5.6n 6.8n -- 2.7n 3.9n -- 2.2n 2.7n -- 1.0n 1.5n* -- 680p 1.0n* -- 470p 680p* -- -- -- -- -- -- -- -- -- -- -- 10p 330n 470p 10 -- 10p 270n 470p 5.6 10p 120n 470p 3.3 10p 82n 470p 1.0 10p 68n 470p 680n 10p 47n 470p 180n 10p 33n 470p 150n 10p 22n 470p 100n 10p 10n 470p 47n 10p 6.8n 470p 33n 10p 4.7n 470p 22n 10p 1.8n 470p 6.8n 10p 1.5n 470p 5.6n 10p 1.0n 470p 4.7n 10p 150p 470p 1.5n* 10p 100p 470p 1.0n* 10p 68p -- -- -- -- -- -- -- -- -- -- 150n 180n -- 100n 120n -- 82n 100n -- 56n 82n -- 39n 56n -- 27n 39n -- 12n 18n -- 8.2n 12n -- 5.6n 8.2n -- 2.2n 3.3n -- 1.8n 2.2n -- 1.2n 1.5n -- -- -- -- -- -- -- -- -- -- -- 390p 680n 1.0n 15 -- 390p 470n 1.0n 10 390p 270n 1.0n 5.6 390p 180n 1.0n 1.8 390p 120n 1.0n 1.2 390p 82n 1.0n 390n 390p 68n 1.0n 220n 390p 39n 1.0n 150n 390p 22n 1.0n 82n 390p 12n 1.0n 68n 390p 10n 1.0n 47n 390p 4.7n 1.0n 15n 390p 2.7n 1.0n 10n 390p 1.8n 1.0n 8.2n 27p 330p 1.0n 4.7n* 27p 180p 1.0n 2.2n* 27p 120p -- -- -- -- -- 330n -- 220n 270n -- 150n 180n -- 100n 150n -- 82n 100n -- 47n 68n -- 27n 39n -- 15n 22n -- 12n 18n -- 5.6n 6.8n -- 3.3n 4.7n -- 2.2n 3.3n -- -- -- -- -- -- -- 680p 1.0 2.2n 22 -- 680p 680n 2.2n 15 680p 390n 2.2n 10 680p 270n 2.2n 3.3 680p 220n 2.2n 2.2 680p 150n 2.2n 1.0 680p 100n 2.2n 470n 680p 68n 2.2n 330n 680p 39n 2.2n 150n 680p 22n 2.2n 100n 680p 15n 2.2n 82n 680p 8.2n 2.2n 33n 680p 5.6n 2.2n 22n 680p 3.9n 1.8n 15n 47p 680p 1.8n 6.8n* 47p 470p 1.8n 4.7n* 47p 220p -- -- -- -- -- -- 470n 560n -- 330n 470n -- 270n 390n -- 180n 270n -- 120n 180n -- 82n 120n -- 47n 68n -- 27n 39n -- 18n 27n -- 10n 15n -- 6.8n 10n -- 4.7n 6.8n -- -- -- -- -- -- Note: 0402, 0505, 1111 and 2211 case--sizes--are available in -- -- -- -- -- our speciality ranges. 5550 T=4.0mm -- 10V Please refer to the relevant -- -- -- -- sections of this--catalogue for more details. -- -- 16V -- -- -- 25V 50/63V 100V 200/ 500V 630V 250V 1kV 1.2kV 1.5kV 2kV 2.5kV 3kV 4kV 5kV 6kV 8kV 1812 T=2.5mm 1812 T=3.2mm 1825 T=2.5mm 1825 T=3.2mm 2220 T=2.5mm 2220 T=4.2mm max. 2225 T=2.5mm 2225 T=4.0mm 470p 3640 820p* T=2.5mm -- 3640 T=4.0mm 1.0n 5550 1.2n* T=2.5mm -- 5550 T=4.0mm 1.8n 8060 2.2n* T=2.5mm -- 10kV 12kV 8060 T=4.0mm Contents General introduction Definitions of Ultra-Stable and Stable..................................................................................2 Dielectric characteristics.....................................................................................................3 Capacitance, Impedance and E.S.R. vs Frequency...............................................................4 Ageing, capacitance measurements and tight tolerance capacitors........................................5 Production processes and reliability....................................................................................6 FlexiCapTM overview...........................................................................................................7 Testing and termination types............................................................................................8 Documentation and compliance..........................................................................................9 IECQ-CECC and AEC-Q200 periodic tests...........................................................................10 Handling notes................................................................................................................11 Soldering information......................................................................................................12 Chip dimensions..............................................................................................................13 Product Selector........................................................................................................ 14-15 Ceramic Chip capacitors Standard MLCC ranges - 10Vdc to 12kVdc - C0G/NP0 & X7R........................................ 16-18 ProtectiCapTM capacitors..................................................................................................19 TCC/VCC capacitors................................................................................................... 20-21 VC1 capacitors.......................................................................................................... 22-23 PSL capacitors.......................................................................................................... 24-25 High Q capacitors - MS range..................................................................................... 26-27 Ultra-low ESR capacitors..................................................................................................28 StackiCapTM capacitors.....................................................................................................29 Non-magnetic capacitors........................................................................................... 30-31 Non-magnetic Ribbon Leaded capacitors...........................................................................32 Open Mode & Tandem capacitors.....................................................................................33 IECQ-CECC range............................................................................................................34 AEC-Q200 range..............................................................................................................35 S02A Space grade range..................................................................................................36 Safety Certified capacitors.......................................................................................... 37-39 250Vac Non Safety rated AC capacitors.............................................................................40 115Vac 400Hz capacitors.................................................................................................41 High Dielectric Withstand Voltage range............................................................................42 X8R High Temperature capacitors.....................................................................................43 Surface Mount EMI filters E01 & E07 feedthrough chip capacitors....................................................................... 44-45 E03 X2Y Integrated Passive Components.................................................................... 46-47 Packaging information - Ceramic chip capacitors.......................................................... 48-49 Radial Leaded capacitors ..................................................................................... 50-55 Packaging information - Radial Leaded capacitors........................................................ 56-57 www.syfer.com | Phone: +44.1603.723300 | 1 Definitions of Ultra-Stable and Stable Multilayer Ceramic Capacitors are generally divided into classes which are defined by the capacitance temperature characteristics over specified temperature ranges. These are designated by alpha numeric codes. Code definitions are summarised below and are also available in the relevant national and international specifications. C0G/NP0 - Ultra Stable Class 1 Ceramic (EIA Class 1) Spec. Classification Temperature range C Maximum capacitance change @ rated DC volts Syfer dielectric code CECC 1B/CG -55 +125 0 30ppm/C C EIA C0G/NP0 -55 +125 0 30ppm/C C MIL CG (BP) -55 +125 0 30ppm/C C a) Time does not significantly affect capacitance and dissipation factor (Tan ) - no ageing. b) Capacitance and dissipation factor are not affected by voltage. c) Linear temperature coefficient. Capacitors within this class have a dielectric constant range from 10 to 100. They are used in applications which require ultra stable dielectric characteristics with negligible dependence of capacitance and dissipation factor with time, voltage and frequency. They exhibit the following characteristics:- X8R, X7R and X5R - Stable Class II Ceramic (EIA Class II) Spec. Maximum capacitance change % over temperature range Temperature range C Classification No DC volt applied Rated DC Volt Syfer dielectric code +20 -30 +15 -25 R X B CECC 2C1 2R1 2X1 -55 +125 -55 +125 -55 +125 20 15 15 EIA X8R X7R X5R -55 +150 -55 +125 -55 +85 15 15 15 MIL BX BZ -55 +125 -55 +125 15 20 Capacitors of this type have a dielectric constant range of 10004000 and also have a non-linear temperature characteristic which exhibits a dielectric constant variation of less than 15% (2R1) from its room temperature value, over the specified temperature range. Generally used for by-passing (decoupling), coupling, filtering, frequency discrimination, DC blocking and voltage transient - - +15 -25 +20 -30 C ppm/C 25 TYPICAL LIMIT 0 -25 LOWER LIMIT -50 -55 -25 0 25 50 75 100 125 Temperature (C) 2 | Phone: +44.1603.723300 | www.syfer.com C0G/NP0 and X7R 20 15 10 Typical capacitance change curves will lie within the shown limits Power (mW) UPPER LIMIT Power ratings X7R capacitance vs temperature % Capacitance Change 50 B R suppression with greater volumetric efficiency than Class l units, whilst maintaining stability within defined limits. Capacitance and dissipation factor are affected by:Time (Ageing) Voltage (AC or DC) Frequency Typical dielectric temperature characteristics C0G/NP0 capacitance vs temperature N X P 5 0 -5 -10 -15 -20 -55 -35 -15 5 25 45 65 Temperature (C) 85 105 125 Operating Temperature (C) Dielectric characteristics Technical Summary C0G/NP0 X5R X7R X8R Ultra stable Stable Stable Stable Dielectric characteristics IECQCECC EIA MIL Rated temperature range Maximum capacitance change over temperature range No DC voltage applied 1B/CG - - - 2C1 2R1 2X1 - - C0G/ NP0 - X5R - X7R - X8R - - CG (BP) - BZ - BX - -55C to +125C -55C to +85C 0 30 ppm/C 15% 20% 15% 15% 15% - +20 -30% - +15 -25% - P R X B N Rated DC voltage applied Syfer dielectric ordering code Tangent of loss angle (tan ) C Cr > 50pF 0.0015 Cr 50pF = 0.0015 (15 + 0.7) Cr Insulation resistance (Ri) Time constant (Ri x Cr) (whichever is the least) Capacitance tolerance 100G or 1000s Cr <4.7pF Cr <10pF Cr >10pF 0.05pF (H) 0.10pF (B) 0.25pF (C) 0.50pF (D) 0.10pF (B) 0.25pF (C) 0.50pF (D) 1% (F) 2% (G) 5% (J) 10% (K) -55C to +150C 0.025 0.025 0.025 100G or 1000s 100G or 1000s 100G or 1000s 5% (J) 10% (K) 20% (M) 5% (J) 10% (K) 20% (M) 5% (J) 10% (K) 20% (M) Voltage applied for 5 seconds. Charging current limited to 50mA maximum. Dielectric strength <200V >200V to <500V 500V to <1000V 500V to <1000V >1kV to <1200V >1200V >1000V -55C to +125C 2.5 times Rated voltage + 250V 1.5 times 1.25 times 1.2 times - 2.5 times - 2.5 times Rated voltage + 250V 1.5 times 1.2 times 2.5 times - Climatic category (IEC) Chip 55/125/56 55/85/56 55/125/56 55/150/56 Dipped 55/125/21 - 55/125/21 - Discoidal 55/125/56 - 55/125/56 - Zero <2% per time decade <2% per time decade <2% per time decade Ageing characteristic (Typical) The table above highlights the difference in coding for IECQ-CECC, EIA and MIL standards when defining the temperature coeffiecient and the voltage coefficient. Approvals Chip QC-32100 - QC-32100 - www.syfer.com | Phone: +44.1603.723300 | 3 Capacitance, Impedance and E.S.R. vs Frequency Impedance vs Frequency - chips ESR vs Frequency - chips Ultra Stable C0G/NP0 dielectric Ultra Stable C0G/NP0 dielectric Ultra Stable C0G/NP0 dielectric Ultra Stable C0G/NP0 dielectric 1000 10000000 1000000 100000 10pF 100pF 1nF 10nF 100 ESR (Ohms) Impedance (Ohms) 100000000 10000 1000 100 10 10 1 0.1 1 0.01 0.1 0.01 0.001 0.01 0.1 1 10 100 1000 0.001 0.001 10000 Frequency (MHz) 0.01 0.1 1 10 100 Stable X7R dielectric 10000 1000 10000 Stable X7R dielectric 10000 1000000 10000 1nF 10nF 100nF 1F 1nF 10nF 100nF 1F 1000 ESR (Ohms) 100000 1000 100 10 1 0.1 100 10 1 0.1 0.01 0.001 0.01 0.001 0.01 0.1 1 10 100 1000 0.0001 0.001 10000 Frequency (MHz) Impedance vs Frequency - 10nF chips Stable X7R dielectric 0.01 0.1 1 10 100 Frequency (MHz) Stable X7R dielectric 10nF Impedance (Ohms) Impedance (Ohms) 100000 10000 1000 1808 0805 1206 1210 100 10 1 0.1 0.01 0.001 0.01 0.1 1 10 Frequency (MHz) (MHz) Frequency 4 1000 Frequency (MHz) Stable X7R dielectric Stable X7R dielectric Impedance (Ohms) 100pF 1nF 10nF | Phone: +44.1603.723300 | www.syfer.com 100 1000 10000 Ageing of ceramic capacitors Ageing Capacitance measurements Capacitor ageing is a term used to describe the negative, logarithmic capacitance change which takes place in ceramic capacitors with time. The crystalline structure for barium titanate based ceramics changes on passing through its Curie temperature (known as the Curie Point) at about 125C. This domain structure relaxes with time and in doing so, the dielectric constant reduces logarithmically; this is known as the ageing mechanism of the dielectric constant. The more stable dielectrics have the lowest ageing rates. Because of ageing it is necessary to specify an age for reference measurements at which the capacitance shall be within the prescribed tolerance. This is fixed at 1000 hours, since for practical purposes there is not much further loss of capacitance after this time. The ageing constant, or ageing rate, is defined as the percentage loss of capacitance due to the ageing process of the dielectric which occurs during a decade of time (a tenfold increase in age) and is expressed as percent per logarithmic decade of hours. As the law of decrease of capacitance is logarithmic, this means that in a capacitor with an ageing rate of 1% per decade of time, the capacitance will decrease at a rate of: a) b) c) d) e) 1% between 1 and 10 hours An additional 1% between the following 10 and 100 hours An additional 1% between the following 100 and 1000 hours An additional 1% between the following 1000 and 10000 hours etc The ageing rate continues in this manner throughout the capacitor's life. Typical values of the ageing constant for our Multilayer Ceramic Capacitors are: The ageing curve for any ceramic dielectric is a straight line when plotted on semi-log paper. Capacitance vs time (Ageing X7R @ <2% per decade) c % The ageing process is reversible and repeatable. Whenever the capacitor is heated to a temperature above the Curie Point the ageing process starts again from zero. All capacitors shipped are within their specified tolerance at the standard reference age of 1000 hours after having cooled through their Curie temperature. C0G/NP0 1 10 100 1000 10000 Age (Hours) Dielectric class Typical values Ultra Stable C0G/NP0 Negligible capacitance loss through ageing Stable X7R <2 % per decade of time Tight tolerance One of the advantages of Syfer's unique `wet process' of manufacture is the ability to offer capacitors with exceptionally tight capacitance tolerances. The accuracy of the printing screens used in the fully automated, computer controlled manufacturing process allows for tolerance as close as +/-1% on C0G/NP0 parts greater than or equal to 10pF. For capacitance values below <4.7pF, tolerances can be as tight as +/-0.05pF. www.syfer.com | Phone: +44.1603.723300 | 5 Production processes and reliability Production process flowchart Ceramic powder preparation Syfer reliability grades Electrode ink material Space Grade ESCC 3009(1) Multilayer build MIL Grade(2) IECQ-CECC(3) AEC-Q200(4) Fire Standard components (wet process) Rumble High reliability (space quality) Standard reliability Notes: (1) Space grade tested in accordance with ESCC 3009. Refer to Syfer specification S02A 0100. DPA inspection (2) MIL Grade. Released in accordance with US standards available on request. (3) IECQ-CECC. The International Electrotechnical Commission (IEC) Quality Assessment System for Electronic Components. This is an internationally recognised product quality certification which provides customers with assurance that the product supplied meets high quality standards. Termination View Syfer's IECQ-CECC approvals at http://www.iecq.org or at www.syfer.com Plating (if specified) Printing (4) AEC-Q200. Automotive Electronics Council Stress Test Qualification For Passive Components. Refer to Syfer application note reference AN0009. (if specified) Syfer reliability surface mount product groups High reliability Electrical test Tandem FlexiCapTM capacitors(1) Test verification Open Mode FlexiCapTM capacitors(2) Standard FlexiCapTM capacitors(3) Additional sample Rel tests Standard MLC capacitors(4) (if specified) Standard reliability Notes: QC inspection Additional Hi Rel activities (1) "Tandem" construction capacitors, ie internally having the equivalent of 2 series capacitors. If one of these should fail short-circuit, there is still capacitance end to end and the chip will still function as a capacitor, although capacitance maybe affected. Refer to application note AN0021. Also available qualified to AEC-Q200. (2) "Open Mode" capacitors with FlexiCapTM termination also reduce the possibility of a short circuit by utilising inset electrode margins. Refer to application note AN0022. Also available qualified to AEC-Q200. (S02A 100% burn-in, QC insp) Packaging (3) Multilayer capacitors with Syfer FlexiCapTM termination. By using FlexiCapTM termination, there is a reduced possibility of the mechanical cracking occurring. (4) "Standard" capacitors includes MLCCs with tin finish over nickel, but no FlexiCapTM. Finished goods store 6 | Phone: +44.1603.723300 | www.syfer.com FlexiCapTM overview FlexiCapTM termination MLCCs are widely used in electronic circuit design for a multitude of applications. Their small package size, technical performance and suitability for automated assembly makes them the component of choice for the specifier. However, despite the technical benefits, ceramic components are brittle and need careful handling on the production floor. In some circumstances they may be prone to mechanical stress damage if not used in an appropriate manner. Board flexing, depanelisation, mounting through hole components, poor storage and automatic testing may all result in cracking. in partnership with customers world wide, to eliminate mechanical cracking. An additional benefit of FlexiCapTM is that MLCCs can withstand temperature cycling -55C to 125C in excess of 1,000 times without cracking. FlexiCapTM termination has no adverse effect on any electrical parameters, nor affects the operation of the MLCC in any way. Picture taken at 1,000x magnification using a SEM to demonstrate the fibrous nature of the FlexiCapTM termination that absorbs increased levels of mechanical stress. Careful process control is important at all stages of circuit board assembly and transportation - from component placement to test and packaging. Any significant board flexing may result in stress fractures in ceramic devices that may not always be evident during the board assembly process. Sometimes it may be the end customer who finds out - when equipment fails! Syfer has the solution - FlexiCapTM FlexiCapTM has been developed as a result of listening to customers' experiences of stress damage to MLCCs from many manufacturers, often caused by variations in production processes. Available on the following ranges: All High Reliability ranges Our answer is a proprietary flexible epoxy polymer termination material, that is applied to the device under the usual nickel barrier finish. FlexiCapTM will accommodate a greater degree of board bending than conventional capacitors. Standard and High Voltage chips Syfer FlexiCapTM termination X2Y Integrated Passive Components Ranges are available with FlexiCapTM termination material offering increased reliability and superior mechanical performance (board flex and temperature cycling) when compared with standard termination materials. Refer to Syfer application note reference AN0001. FlexiCapTM capacitors enable the board to be bent almost twice as much before mechanical cracking occurs. Refer to application note AN0002. FlexiCapTM is also suitable for Space applications having passed thermal vacuum outgassing tests. Refer to Syfer application note reference AN0026. Fired ceramic dielectric Safety Certified capacitor chips Non-magnetic capacitors 3 terminal EMI chips X8R High Temperature capacitors Summary of PCB bend test results The bend tests conducted on X7R have proven that the FlexiCapTM termination withstands a greater level of mechanical stress before mechanical cracking occurs. The AEC-Q200 test for X7R requires a bend level of 2mm minimum and a cap change of less than 10%. Product X7R Standard termination FlexiCapTM Typical bend performance under AEC-Q200 test conditions 2mm to 3mm Typically 8mm to 10mm Application notes Metal electrodes Tin outer layer Intermediate nickel or copper layer termination base FlexiCapTM MLCC cross section FlexiCapTM benefits With traditional termination materials and assembly, the chain of materials from bare PCB to soldered termination, provides no flexibility. In circumstances where excessive stress is applied - the weakest link fails. This means the ceramic itself, which may fail short circuit. The benefit to the user is to facilitate a wider process window giving a greater safety margin and substantially reducing the typical root causes of mechanical stress cracking. FlexiCapTM may be handled, stored and transported in the same manner as standard terminated capacitors. The requirements for mounting and soldering FlexiCapTM are the same as for standard SMD capacitors. For customers currently using standard terminated capacitors there should be no requirement to change the assembly process when converting to FlexiCapTM. Based upon board bend tests in accordance with IEC 60384-1 the amount of board bending required to mechanically crack a FlexiCapTM terminated capacitor is significantly increased compared with standard terminated capacitors. It must be stressed however, that capacitor users must not assume that the use of FlexiCapTM terminated capacitors will totally eliminate mechanical cracking. Good process controls are still required for this objective to be achieved. FlexiCapTM may be soldered using your traditional wave or reflow solder techniques including lead free and needs no adjustment to equipment or current processes. Syfer has delivered millions of FlexiCapTM components and during that time has collected substantial test and reliability data, working www.syfer.com | Phone: +44.1603.723300 | 7 Testing and termination types Tests conducted during batch manufacture Syfer reliability SM product group Standard SM capacitors IECQ-CECC / MIL grade AEC-Q200 S (Space grade) High Rel S02A Solderability Resistance to soldering heat Plating thickness verification (if plated) DPA (Destructive Physical Analysis) Voltage proof test (DWV / Flash) Insulation resistance Capacitance test Dissipation factor test 100% visual inspection 100% burn-in. (2xRV @125C for 168 hours) Load sample test @ 125C LAT1 & LAT2 (1000 hours) Humidity sample test. 85C/85%RH 240 hours Hot IR sample test Axial pull sample test (MIL-STD-123) Breakdown voltage sample test Deflection (bend) sample test SAM (Scanning Acoustic Microscopy) LAT1 (4 x adhesion, 8 x rapid temp change + LAT2 and LAT3) - - - LAT2 (20 x 1000 hour life test + LAT3) - - - LAT3 (6 x TC and 4 x solderability) - - - Test conducted as standard. Optional test. Please discuss with the sales office. Termination types available Syfer reliability SM product group Standard SM capacitors IECQ-CECC / MIL grade AEC-Q200 S (space grade) High Rel S02A F: Silver palladium - J: Silver base with nickel barrier (100% matte tin plating) C0G/NP0 dielectric only A: Silver base with nickel barrier (tin/lead plating with min 10% lead) - Y: FlexiCapTM with nickel barrier (100% matte tin plating) H: FlexiCapTM with nickel barrier (tin/lead plating with min 10% lead) - 2: Silver base with Non-magnetic Cu Barrier (100% matte tin plating) (1) - - - 3: FlexiCapTM with Non-magnetic Cu Barrier (100% matte tin plating) (2) - - - Notes: (1) Available on C0G/NP0 and High Q only. (2) Available on all dielectrics. Termination available. Termination available but generally not requested for space grade components. Please discuss with the sales office. 8 | Phone: +44.1603.723300 | www.syfer.com Documentation and compliance Release documentation Syfer reliability SM product group Standard SM capacitors IECQ-CECC AEC-Q200 MIL grade S (Space grade) High Rel S02A Certificate of conformance - IECQ-CECC Release certificate of conformity - - - Batch electrical test report Included in data pack S (space grade) data documentation package - - - Release documentation supplied as standard. Original documentation. Periodic tests conducted and reliability data availability Standard Surface Mount capacitors Components are randomly selected on a sample basis and the following routine tests are conducted: Example of FIT (Failure In Time) data available: 10000 Load Test. 1,000 hours @125C (150C for X8R). Applied voltage depends on components tested. RV 50% of RV 25% of RV 10% of RV 10 FIT Humidity Test. 168 hours @ 85C/85%RH. Board Deflection (bend test). Test results are available on request. 0.01 Conversion factors From To Operation FITS MTBF (hours) 109 / FITS FITS MTBF (years) 109 / (FITS x 8760) 0.00001 25C 50C 75C 100C 125C Component type: 0805 (C0G/NP0 and X7R). FITS = Failures in 109 hours. MTBF = Mean time between failures. Testing location: REACH (Registration, Evaluation, Authorisation and restriction of Chemicals) statement exceptions) and those with plated terminations are suitable for soldering using common lead free solder alloys (refer to `Soldering Information' for more details on soldering limitations). Compliance with the EU RoHS directive automatically signifies compliance with some other legislation (e.g. Korea RoHS). Please refer to the sales office for details of compliance with other materials legislation. The main purpose of REACH is to improve the protection of human health and the environment from the risks arising from the use of chemicals. Syfer Technology Ltd maintains both ISO14001, Environmental Management System and OHSAS 18001 Health and Safety Management System approvals that require and ensure compliance with corresponding legislation such as REACH. For further information, please contact the sales office at sales@syfer.co.uk RoHS compliance Syfer routinely monitors world wide material restrictions (e.g. EU / China and Korea RoHS mandates) and is actively involved in shaping future legislation. All standard C0G/NP0, X7R, X5R and High Q Syfer MLCC products are compliant with the EU RoHS directive (see below for special Syfer reliability test department. Results based on: 16,622,000 component test hours. Breakdown of material content, SGS analysis reports and tin whisker test results are available on request. Most Syfer MLCC components are available with non RoHS compliant tin lead (SnPb) solderable termination finish for exempt applications and where pure tin is not acceptable. Other tin free termination finishes may also be available - please refer to the sales office for further details. Radial components have tin plated leads as standard but tin/lead is available as a special option. Please refer to the radial section of the catalogue for further details. X8R ranges <250Vdc are not RoHS 2011/65/EU compliant. Check the website, www.syfer.com for latest RoHS update. Export controls and dual-use regulations Certain Syfer catalogue components are defined as `dual-use' items under international export controls - those that can be used for civil or military purposes which meet certain specified technical standards. The defining criteria for a dual-use component with respect to Syfer products is one with a voltage rating of >750V and a capacitance value >250nF and a series inductance <10nH. Components defined as `dual-use' under the above criteria automatically require a licence for export outside the EU, and may require a licence for export within the EU. The application for a licence is routine, but customers for these products will be asked to supply further information. Please refer to the sales office if you require any further information on export restrictions. Other special components may additionally need to comply with export regulations. www.syfer.com | Phone: +44.1603.723300 | 9 IECQ-CECC and AEC-Q200 - Periodic tests Periodic tests conducted for IECQ-CECC and AEC-Q200 Test ref Test Termination type Additional requirements P1 High temperature exposure (storage) All types P2 Temperature cycling P3 Sample acceptance Reference P N C Un-powered. 1,000 hours @ T=150C. Measurement at 24 2 hours after test conclusion 12 77 0 MIL-STD-202 Method 108 C0G/NP0: All types X7R: Y and H only 1,000 cycles -55C to +125C Measurement at 24 2 hours after test conclusion 12 77 0 JESD22 Method JA-104 Moisture resistance All types T = 24 hours/cycle. Note: Steps 7a and 7b not required. Un-powered. Measurement at 24 2 hours after test conclusion 12 77 0 MIL-STD-202 Method 106 P4 Biased humidity All types 1,000 hours 85C/85%RH. Rated voltage or 50V whichever is the least and 1.5V. Measurement at 24 2 hours after test conclusion 12 77 0 MIL-STD-202 Method 103 P5 Operational life All types Condition D steady state TA=125C at full rated. Measurement at 24 2 hours after test conclusion 12 77 0 MIL-STD-202 Method 108 P6 Resistance to solvents All types Note: Add aqueous wash chemical. Do not use banned solvents 12 5 0 MIL-STD-202 Method 215 P7 Mechanical shock C0G/NP0: All types X7R: Y and H only Figure 1 of Method 213. Condition F 12 30 0 MIL-STD-202 Method 213 P8 Vibration C0G/NP0: All types X7R: Y and H only 5g's for 20 minutes, 12 cycles each of 3 orientations. Note: Use 8" x 5" PCB 0.031" thick 7 secure points on one long side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10-2,000Hz 12 30 0 MIL-STD-202 Method 204 P9 Resistance to soldering heat All types Condition B, no pre-heat of samples: Single wave solder - Procedure 2 3 12 0 MIL-STD-202 Method 210 P10 Thermal shock C0G/NP0: All types X7R: Y and H only -55C/+125C. Number of cycles 300. Maximum transfer time - 20 seconds, dwell time - 15 minutes. Air-Air 12 30 0 MIL-STD-202 Method 107 P11 Adhesion, rapid temp change and climatic sequence X7R: A, F and J only 5N force applied for 10s, -55C/ +125C for 5 cycles, damp heat cycles 12 27 0 BS EN132100 Clause 4.8, 4.12 and 4.13 C0G/NP0: All types X7R: Y and H only 3mm deflection Class I 2mm deflection Class II 12 30 0 AEC-Q200-005 X7R: A, F and J only 1mm deflection. 12 12 0 BS EN132100 Clause 4.9 P12 Board flex P13 P14 Terminal strength All types Force of 1.8kg for 60 seconds 12 30 0 AEC-Q200-006 P15 Beam load test All types - 12 30 0 AEC-Q200-003 P16 Damp heat steady state All types 56 days, 40C / 93% RH 15x no volts, 15x 5Vdc, 15x rated voltage or 50V whichever is the least. 12 45 0 BS EN132100 Clause 4.14 Test results are available on request. P = Period in months. N = Sample size. C = Acceptance criteria. 10 | Phone: +44.1603.723300 | www.syfer.com Handling notes Detailed application notes intended to guide and assist our customers in using multilayer ceramic capacitors in surface mount technology are available on the Syfer website www.syfer.com The information concentrates on the handling, mounting, connection, cleaning, test and re-work requirements particular to MLC's for SMD technology, to ensure a suitable match between component capability and user expectation. Some extracts are given below. Handling Ceramics are dense, hard, brittle and abrasive materials. They are liable to suffer mechanical damage, in the form of chips or cracks, if improperly handled. Terminations may be abraded onto chip surfaces if loose chips are tumbled in bulk. Metallic tracks may be left on the chip surfaces which might pose a reliability hazard. Components should never be handled with fingers; perspiration and skin oils can inhibit solderability and will aggravate cleaning. Chip capacitors should never be handled with metallic instruments. Metal tweezers should never be used as these can chip the product and may leave abraded metal tracks on the product surface. Plastic or plastic coated metal types are readily available and recommended - these should be used with an absolute minimum of applied pressure. Counting or visual inspection of chip capacitors is best performed on a clean glass or hard plastic surface. If chips are dropped or subjected to rough handling, they should be visually inspected before use. Electrical inspection may also reveal gross damage via a change in capacitance, an increase in dissipation factor or a decrease either in insulation resistance or electrical strength. Transportation Where possible, any transportation should be carried out with the product in its unopened original packaging. If already opened, any environmental control agents supplied should be returned to packaging and the packaging re-sealed. Avoid paper and card as a primary means of handling, packing, transportation and storage of loose components. Many grades have a sulphur content which will adversely affect termination solderability. Loose chips should always be packed with sulphur-free wadding to prevent impact or abrasion damage during transportation. Storage Incorrect storage of components can lead to problems for the user. Rapid tarnishing of the terminations, with an associated degradation of solderability, will occur if the product comes into contact with industrial gases such as sulphur dioxide and chlorine. Storage in free air, particularly moist or polluted air, can result in termination oxidation. Packaging should not be opened until the MLC's are required for use. If opened, the pack should be re-sealed as soon as is practicable. Alternatively, the contents could be kept in a sealed container with an environmental control agent. Long term storage conditions, ideally, should be temperature controlled between -5 and +40C and humidity controlled between 40 and 60% R.H. Mechanical considerations for mounted ceramic chip capacitors Due to their brittle nature, ceramic chip capacitors are more prone to excesses of mechanical stress than other components used in surface mounting. One of the most common causes of failure is directly attributable to bending the printed circuit board after solder attachment. The excessive or sudden movement of the flexible circuit board stresses the inflexible ceramic block causing a crack to appear at the weakest point, usually the ceramic/termination interface. The crack may initially be quite small and not penetrate into the inner electrodes; however, subsequent handling and rapid changes in temperature may cause the crack to enlarge. This mode of failure is often invisible to normal inspection techniques as the resultant cracks usually lie under the capacitor terminations but if left, can lead to catastrophic failure. More importantly, mechanical cracks, unless they are severe may not be detected by normal electrical testing of the completed circuit, failure only occurring at some later stage after moisture ingression. The degree of mechanical stress generated on the printed circuit board is dependent upon several factors including the board material and thickness; the amount of solder and land pattern. The amount of solder applied is important, as an excessive amount reduces the chip's resistance to cracking. It is Syfer's experience that more than 90% are due to board depanelisation, a process where two or more circuit boards are separated after soldering is complete. Other manufacturing stages that should be reviewed include: 1) Attaching rigid components such as connectors, relays, display panels, heat sinks etc. 2) Fitting conventional leaded components. Special care must be exercised when rigid terminals, as found on large can electrolytic capacitors, are inserted. 3) Storage of boards in such a manner which allows warping. 4) Automatic test equipment, particularly the type employing "bed of nails" and support pillars. 5) Positioning the circuit board in its enclosure especially where this is a "snap-fit". Syfer were the first MLCC manufacturer to launch a flexible termination to significantly reduce the instances of mechanical cracking. FlexiCapTM termination introduces a certain amount of give into the termination layer absorbing damaging stress. Unlike similar systems, FlexiCapTM does not tear under tension, but absorbs the stress, so maintaining the characteristics of the MLCC. SM Pad Design Syfer conventional 2-terminal chip capacitors can generally be mounted using pad designs in accordance with IPC-7351, Generic Requirements for Surface Mount Design and Land Pattern Standards, but there are some other factors that have been shown to reduce mechanical stress, such as reducing the pad width to less than the chip width. In addition, the position of the chip on the board should also be considered. 3-Terminal components are not specifically covered by IPC-7351, but recommended pad dimensions are included in the Syfer catalogue / website for these components. Taped product should be stored out of direct sunlight, which might promote deterioration in tape or adhesive performance. Product, stored under the conditions recommended above, in its "as received" packaging, has a minimum shelf life of 2 years. www.syfer.com | Phone: +44.1603.723300 | 11 Soldering information Soldering information Rework of Chip capacitors Syfer MLCCs are compatible with all recognised soldering/ mounting methods for chip capacitors. A detailed application note is available on-line at www.syfer.com Syfer recommend hot air/ gas as the preferred method for applying heat for rework. Apply even heat surrounding the component to minimise internal thermal gradients. Soldering irons or other techniques that apply direct heat to the chip or surrounding area, should not be used as these can result in micro cracks being generated. Reflow soldering surface mount chip capacitors Syfer recommend reflow soldering as the preferred method for mounting MLCCs. Syfer MLCCs can be reflow soldered using a reflow profile generally as defined in IPC / JEDEC J-STD-020. Sn plated termination chip capacitors are compatible with both conventional and lead free soldering, with peak temperatures of 260C to 270C acceptable. The heating ramp rate should be such that components see a temperature rise of 1.5C to 4C per seconds to maintain temperature uniformity through the MLCC. The time for which the solder is molten should be maintained at a minimum, so as to prevent solder leaching. Extended times above 230C can cause problems with oxidation of Sn plating. Use of inert atmosphere can help if this problem is encountered. PdAg terminations can be particularly susceptible to leaching with lead free, tin rich solders and trials are recommended for this combination. Cooling to ambient temperature should be allowed to occur naturally, particularly if larger chip sizes are being soldered. Natural cooling allows a gradual relaxation of thermal mismatch stresses in the solder joints. Forced cooling should be avoided as this can induce thermal breakage. Wave soldering Chip and Radial Leaded capacitors Wave soldering is generally acceptable, but the thermal stresses caused by the wave have been shown to lead to potential problems with larger or thicker chips. Particular care should be taken when soldering SM chips larger than size 1210 and with a thickness greater than 1.0mm for this reason. 0402 size components are not suitable for wave soldering. 0402 size components can also be susceptible to termination leaching and reflow soldering is recommended for this size MLCC. Maximum permissible wave temperature is 270C for SM chips and 260C for Radial Leaded capacitors. The total immersion time in the solder should be kept to a minimum. It is strongly recommended that Sn/Ni plated terminations are specified for wave soldering applications. PdAg termination is particularly susceptible to leaching when subjected to lead free wave soldering and is not generally recommended for this application. Minimise the rework heat duration and allow components to cool naturally after soldering. Hand soldering Radial Leaded capacitors Radial capacitors can be hand soldered into boards using soldering irons, provided care is taken not to touch the body of the capacitor with the iron tip. Soldering should be carried out from the opposite side of the board to the radial to minimise the risk of damage to the capacitor body. Where possible, a heat sink should be used between the solder joint and the body, especially if longer dwell times are required. Use of silver loaded epoxy adhesives Chip capacitors can be mounted to circuit boards using silver loaded adhesive provided the termination material of the capacitor is selected to be compatible with the silver loaded adhesive. This is normally PdAg. Standard tin finishes are often not recommended for use with silver loaded epoxies as there can be electrical and mechanical issues with the joint integrity due to material mismatch. Solder leaching Leaching is the term for the dissolution of silver into the solder causing a failure of the termination system which causes increased ESR, tan and open circuit faults, including ultimately the possibility of the chip becoming detached. Leaching occurs more readily with higher temperature solders and solders with a high tin content. Pb free solders can be very prone to leaching certain termination systems. To prevent leaching, exercise care when choosing solder alloys and minimize both maximum temperature and dwell time with the solder molten. Plated terminations with nickel or copper anti leaching barrier layers are available in a range of top coat finishes to prevent leaching occurring. These finishes also include Syfer FlexiCapTM for improved stress resistance post soldering. Multilayer ceramic chip - with nickel or copper barrier termination Fired ceramic dielectric Total immersion exposure time for Sn/Ni terminations is 30s at a wave temperature of 260C. Note that for multiple soldering operations, including the rework, the soldering time is cumulative. The pre-heat ramp should be such that the components see a temperature rise of 1.5C to 4C per second as for reflow soldering. This is to maintain temperature uniformity through the MLCC and prevent the formation of thermal gradients within the ceramic. The preheat temperature should be within 120C maximum (100C preferred) of the maximum solder temperature to minimise thermal shock. Cooling to ambient temperature should be allowed to occur naturally, particularly if larger chip sizes are being soldered. Natural cooling allows a gradual relaxation of thermal mismatch stresses in the solder joints. Forced cooling should be avoided as this can induce thermal breakage. 12 | Phone: +44.1603.723300 | www.syfer.com Tin or tin/lead outer layer (as specified by customer) Metal electrodes Intermediate nickel or copper layer Silver termination Chip dimensions Dimensions Length L1 Size T W (L1) mm inches Width (W) mm inches Max. Thickness (T) mm inches Termination Band L2 mm inches min max L2 0402 1.0 0.10 0.04 0.006 0.50 0.10 0.02 0.003 0.60 0.024 0.10 0.004 0.40 0.015 0505 1.4 0.38 0.055 0.015 1.4 0.25 0.055 0.010 1.27 0.050 0.13 0.005 0.5 0.020 0603 1.6 0.2 0.063 0.008 0.8 0.2 0.031 0.008 0.8 0.031 0.10 0.004 0.40 0.015 0805 2.0 0.3 0.08 0.012 1.25 0.2 0.05 0.008 1.3 0.051 0.13 0.005 0.75 0.03 1111 2.79 + 0.51 - 0.25 0.110 + 0.020 - 0.010 2.79 0.38 0.110 0.015 1.8 0.071 0.13 0.005 0.63 0.025 1206 3.2 0.3 0.126 0.012 1.6 0.2 0.063 0.008 1.6 0.063 0.25 0.01 0.75 0.03 1210 3.2 0.3 0.126 0.012 2.5 0.3 0.10 0.012 2.0 0.08 0.25 0.01 0.75 0.03 1410 3.6 0.3 0.14 0.012 2.5 0.3 0.10 0.012 2.0 0.08 0.25 0.01 0.75 0.03 1806 4.5 0.35 0.177 0.012 1.6 0.2 0.063 0.008 1.3 0.051 0.25 0.01 0.75 0.03 1808 4.5 0.35 0.18 0.014 2.0 0.3 0.08 0.012 2.0 0.08 0.25 0.01 1.0 0.04 1812 4.5 0.35 0.18 0.014 3.2 0.3 0.126 0.012 3.2 0.126 0.25 0.01 1.0 0.04 1825 4.5 0.35 0.18 0.014 6.30 0.4 0.25 0.016 4.2 0.16 0.25 0.01 1.0 0.04 2211 5.7 0.4 0.225 0.016 2.79 0.3 0.11 0.012 2.5 0.1 0.25 0.01 0.8 0.03 2215 5.7 0.4 0.225 0.016 3.81 0.35 0.35 0.02 2.5 0.1 0.25 0.01 0.8 0.03 2220 5.7 0.4 0.225 0.016 5.0 0.4 0.197 0.016 4.2 0.16 0.25 0.01 1.0 0.04 2225 5.7 0.4 0.225 0.016 6.3 0.4 0.25 0.016 4.2 0.16 0.25 0.01 1.0 0.04 2520 6.30 0.4 0.25 0.016 5.0 0.4 0.197 0.016 4.2 0.16 0.25 0.01 1.0 0.04 3640 9.2 0.5 0.36 0.02 10.16 0.5 0.40 0.02 4.2 0.16 0.5 0.02 1.5 0.06 3820 9.65 0.5 0.37 0.02 5.0 0.4 0.197 0.016 4.2 0.16 0.5 0.02 1.5 0.06 3035 7.62 0.4 0.30 0.016 8.90 0.5 0.35 0.02 4.2 0.16 0.5 0.02 1.5 0.06 4045 10.2 0.5 0.40 0.02 11.5 0.5 0.45 0.02 4.2 0.16 0.5 0.02 1.5 0.06 4545 11.5 0.5 0.45 0.02 11.5 0.5 0.45 0.02 4.2 0.16 0.5 0.02 1.5 0.06 5550 14.0 0.5 0.55 0.02 12.7 0.5 0.50 0.02 4.2 0.16 0.5 0.02 1.5 0.06 5868 14.8 0.5 0.58 0.02 17.3 0.5 0.68 0.02 4.2 0.16 0.5 0.02 1.5 0.06 8040 20.3 0.5 0.80 0.02 10.16 0.5 0.40 0.02 4.2 0.16 0.5 0.02 1.5 0.06 8060 20.3 0.5 0.80 0.02 15.24 0.5 0.60 0.02 4.2 0.16 0.5 0.02 1.5 0.06 Custom chip sizes not included in the table, but larger than 2225, can be considered with minimum tooling charges. Please refer specific requests direct to the sales office. Max thickness relates to standard components and actual thickness may be considerably less. Thicker parts, or components with reduced maximum thickness, can be considered by request - please refer requests to the sales office. www.syfer.com | Phone: +44.1603.723300 | 13 Product Selector Modem/Tip and Ring Frequency Control/Tuning, Impedance Matching High Frequency Snubber Capacitors and Filters SM and Leaded Decoupling/Smoothing AC Noise Removal High Voltage Circuitry High Speed Decoupling Medical Feedthrough Filtering Automotive Mil/Aero Harsh Environments is particularly recommended for these applications where possible. 14 | Phone: +44.1603.723300 | www.syfer.com Product Selector X7R 1812/2220/2225 100nF to 1F - 250Vdc X7R, C0G/NP0 Y2/X1, X2 Safety Certified Ranges UL/TUV 1808/1812/2211/2215/2220 High Capacitance C0G/NP0 Range 0402 to 8060 0.47pF to 1F - 10V to 12kV Safety Certified High Q & C0G/NP0 Range Ultra-low ESR Class 1 Dielectrics X7R/X5R Ranges Class 1 Dielectrics Low DF/ESR 0603 to 8060 100pF to 22F - 16V to 12kV X7R, E03 X2Y IPCs 0603 to 1812 150pF to 1.2F - 16V to 1kV High Capacitance X7R, C0G/NP0, Y2/X1, X2 Safety Certified Ranges UL/TUV 1808/1812/2211/2215/2220 Balanced Line Capacitors X7R, C0G/NP0 Ranges Safety Certified Non Safety Capacitors designed for use at mains voltages StackiCapTM 250Vac Range ProtectiCapTM PCB Space Saving 0505/1111/1825 Ranges X7R, C0G/NP0, High Q Anti Flashover X7R and C0G/NP0, E03 X2Y IPCs Low Inductance Capacitors 0603 to 2220 10pF to 1.2F X7R, C0G/NP0, High Q & Ultra-low ESR MRI/Non-magnetic 0402 to 4040 non-magnetic termination 0.1pF to 6.8F - 16V to 3kV High Reliability Medical Implantable Special Testing/burn in MLCC and X2Y X7R, C0G/NP0 E01/E07/SBSGC/SBSMC Capacitive X7R, C0G/NP0 0805 to 2220 - 1A to 20A SBSP/SBSG/SBSM Capacitive/Inductive Pi X7R, C0G/NP0 1206 to 2220 22pF to 470nF - 1A to 10A X8R Range Operational temperature up to 150C MLCC Filtering AEC-Q200 Ranges X7R, C0G/NP0 Tandem and Open Mode Hi Reliability Capacitors and Filters Dipped Radial Leaded Capacitors FlexiCapTM Capacitors with extra safe electrode design AEC-Q200 E03 X2Y IPCs X7R and C0G/NP0 AEC-Q200 E01/E07 Feedthrough Capacitors 115Vac 400Hz range S02A/IECQ-CECC/MIL-PRF/Burn in Hi Rel X2Y IPCs X7R, C0G/NP0 4.7pF to 22F - 50V to 12kV www.syfer.com | Phone: +44.1603.723300 | 15 Standard MLCC ranges - 10Vdc to 12Vdc L1 A range of dc rated multi-layer chip capacitors from 0.47pF to 22F and case sizes 0603 to 8060 in C0G/NP0 and X7R dielectrics. Suitable for all general purpose and high reliability applications where package size and reliability are important. All are manufactured using Syfer's unique wet process and incorporate precious metal electrodes. T W L2 Range dimensions - Standard MLCC ranges (L1) mm/inches Width (W) mm/inches Max. Thickness 1.6 0.2 0.063 0.008 2.0 0.3 0.08 0.012 3.2 0.3 0.126 0.012 3.2 0.3 0.126 0.012 4.5 0.35 0.18 0.014 4.5 0.35 0.18 0.014 4.5 0.35 0.18 0.014 5.7 0.4 0.225 0.016 5.7 0.4 0.225 0.016 9.2 0.5 0.36 0.02 14.0 0.5 0.55 0.02 20.3 0.5 0.8 0.02 0.8 0.2 0.031 0.008 1.25 0.2 0.05 0.008 1.6 0.2 0.063 0.008 2.5 0.3 0.1 0.012 2.0 0.3 0.08 0.012 3.2 0.3 0.126 0.012 6.30 0.4 0.25 0.016 5.0 0.4 0.197 0.016 6.3 0.4 0.25 0.016 10.16 0.5 0.4 0.02 12.7 0.5 0.5 0.02 15.24 0.5 0.6 0.02 0.8 0.031 1.3 0.051 1.6 0.063 2.0 0.08 2.0 0.08 2.5 0.1 2.5 0.1 4.2 0.16 4.2 0.16 2.5 0.1 4.2 0.16 2.5 0.1 Size Length 0603 0805 1206 1210 1808 1812 1825 2220 2225 3640 5550 8060 Termination Band (T) mm/inches (L2) mm/inches min max 0.10 0.004 0.13 0.005 0.25 0.01 0.25 0.01 0.25 0.01 0.25 0.01 0.25 0.01 0.25 0.01 0.25 0.01 0.5 0.02 0.5 0.02 0.5 0.02 0.40 0.015 0.75 0.03 0.75 0.03 0.75 0.03 1.0 0.04 1.0 0.04 1.0 0.04 1.0 0.04 1.0 0.04 1.5 0.06 1.5 0.06 1.5 0.06 Custom chip sizes not included in the table, but larger than 2225, can be considered with minimum tooling charges. Please refer specific requests direct to the sales office. Max thickness relates to standard components and actual thickness may be considerably less. Thicker parts, or components with reduced maximum thickness, can be considered by request - please refer requests to the Sales Office. Ordering information - Standard MLCC ranges 1210 Y 100 0103 J X T ___ Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Packaging Suffix code Y = FlexiCapTM termination base with nickel barrier (100% matte tin plating). RoHS compliant. 010 = 10V 016 = 16V 025 = 25V 050 = 50V 063 = 63V 100 = 100V 200 = 200V 250 = 250V 500 = 500V 630 = 630V 1K0 = 1kV 1K2 = 1.2kV 1K5 = 1.5kV 2K0 = 2kV 2K5 = 2.5kV 3K0 = 3kV 4K0 = 4kV 5K0 = 5kV 6K0 = 6kV 8K0 = 8kV 10K = 10kV 12K = 12kV <1.0pF Insert a P for the decimal point as the first character. eg. P300 = 0.3pF Values in 0.1pF steps <10pF H = 0.05 pF B = 0.10pF C = 0.25pF D = 0.50pF C = C0G/NP0 (1B) T = 178mm (7") reel X = X7R (2R1) R = 330mm (13") reel P = X5R B = Bulk pack - tubs or trays Used for specific customer requirements 0603 0805 1206 1210 1808 1812 1825 2220 2225 3640 5550 8060 H = FlexiCapTM termination base with nickel barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. F = Silver Palladium. RoHS compliant. J = Silver base with nickel barrier (100% matte tin plating). RoHS compliant. A = Silver base with nickel barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. 16 | Phone: +44.1603.723300 | www.syfer.com 1.0pF & <10pF Insert a P for the decimal point as the second character. eg. 8P20 = 8.2pF Values are E24 series 10pF First digit is 0. Second and third digits are significant figures of capacitance code. Fourth digit is number of zeros eg. 0101 = 100pF Values are E24 series > 10pF F = 1% G = 2% J = 5% K = 10% M = 20% Standard MLCC - 10Vdc to 12kVdc - C0G/NP0 ranges Standard MLCC - 10Vdc to 12kVdc - C0G/NP0 ranges 1210 1808 1812 1825 3640 5550 8060 12kV* 10kV* 8kV* 6kV* 5kV* 4kV* 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 12kV* 3.2 3.2mm 4mm 3.2 4mm 4mm 3.2 4mm 4mm 4mm 4mm 3.2 4mm 4mm 3.2mm 3.2 4mm 4mm 4mm 4mm 4mm 4mm 3.2 4mm 4mm 4mm 4mm 3.2mm 4mm 4mm 4mm 3.2mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 3.2 3.2 4mm 3.2 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 3.2mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4.0 4mm 4mm 4mm 0.47pF p47 1.0 1p0 1.2 1p2 1.5 1p5 1.8 1p8 2.2 2p2 2.7 2p7 3.3 3p3 3.9 3p9 4.7 4p7 5.6 5p6 6.8 6p8 8.2 8p2 10pF 100 12 120 15 150 18 180 22 220 27 270 33 330 39 390 47 470 56 560 68 680 82 820 100pF 101 120 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 561 680 681 820 821 1.0nF 102 1.2 122 1.5 152 1.8 182 2.2 222 2.7 272 3.3 332 3.9 392 4.7 472 5.6 562 6.8 682 8.2 822 10nF 103 12 123 15 153 18 183 22 223 27 273 33 333 39 393 47 473 56 563 68 683 82 823 100nF 104 120 124 150 154 180 184 220 224 270 274 330 334 390 394 470 474 560 564 680 684 820 824 1.0F 105 Note: The highlighted parts are defined as `dual-use' under export control legislation and as such are subject to export licence restrictions. Please refer to page 9 for further details. l = AEC-Q200 approved parts - maximum values. Note: X7R ranges on reverse 10kV* 200/250V 100V 50/63V 3.2mm 3.2 Note: X7R ranges on reverse 8kV* 6kV* 5kV* 4kV* 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 200/250V 100V 50/63V 3.2mm 3.2 C0G/NP0 Note: 1) *These parts may require conformal coating post soldering. 2) Standard chip thickness = 2.5mm maximum unless specified as 3.2 or 4.0mm. e 12kV* 10kV* 8kV* 6kV* 5kV* 4kV* 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 100V 500V 200/250V 50/63V 6kV* 5kV* 4kV* 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 100V 500V 200/250V 25V 16V 50/63V 10V 6kV* 5kV* 4kV* 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 100V 500V 200/250V 25V 50/63V 16V 10V 6kV* 5kV* 4kV* 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 100V 500V 200/250V 25V 16V 50/63V 10V 6kV* 5kV* 4kV* 3kV 2.5kV 2kV 105 3.2 824 1.0F 3.2mm 684 820 3.2 564 680 1.5kV 474 560 1.2kV 394 470 1kV 334 390 3.2 274 330 3.2mm 224 270 3.2 184 220 630V 154 180 100V 124 150 500V 120 200/250V 104 25V 823 100nF 50/63V 683 82 16V 563 68 10V 473 56 6kV* 393 47 5kV* 333 39 4kV* 273 33 3kV 223 27 2.5kV 183 22 2kV 153 18 1.5kV 15 1.2kV 123 1kV 103 12 630V 822 10nF 500V 682 8.2 200/250V 6.8 100V 562 50/63V 472 5.6 25V 392 4.7 16V 332 3.9 10V 272 3.3 3kV 222 2.7 2.5kV 182 2.2 2kV 152 1.8 1.5kV 122 1.5 1.2kV 1.2 1kV 102 200/250V 821 1.0nF 630V 681 820 100V 561 680 500V 471 560 50/63V 391 470 25V 331 390 16V 271 330 10V 221 270 3kV 181 220 2.5kV 151 180 2kV 150 1.5kV 121 1.2kV 101 120 1kV 820 100pF 630V 680 82 500V 560 68 200/250V 470 56 100V 390 47 50/63V 330 39 25V 270 33 16V 220 27 10V 180 22 2kV 18 1.5kV 150 1.2kV 15 1kV 120 630V 100 12 500V 8p2 10pF 200/250V 6p8 8.2 25V 6.8 100V 5p6 16V 4p7 5.6 50/63V 3p9 4.7 10V 3p3 3.9 500V 2p7 3.3 200/250V 2p2 2.7 100V 1p8 2.2 50/63V 1p5 1.8 25V 1p2 1.5 16V 1.2 10V 1p0 2225 e e e p47 1.0 C0G/NP0 2220 Co d 1206 an c 0805 acit an c Co d acit C ap C ap 0.47pF 0603 Note: X7R ranges on reverse www.syfer.com | Phone: +44.1603.723300 | 17 Standard MLCC - 10Vdc to 12kVdc - X7R ranges Standard MLCC - 10Vdc to 12kVdc - X7R ranges 1812 1825 2220 2225 3640 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 100V 500V 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 12kV 10kV 8kV 6kV 5kV 4kV 3kV 12kV 10kV 8kV 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 100V 12kV 10kV 8kV 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 100V 200/250V 50/63V 200/250V 50/63V 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 50/63V 200/250V 100V 200/250V 500V 100V 50/63V 25V 16V 200/250V 25V 50/63V 16V 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 200/250V 100V 500V 25V 50/63V 16V * * * * * * * * * * * * X7R Note: C0G/NP0 ranges on reverse 18 | Phone: +44.1603.723300 | www.syfer.com * StackiCapTM high capacitance versions available from the StackiCapTM range - see page 29 for details. Higher capacitance values available from theProtectiCapTM capacitors range - see page 19 for details. l = AEC-Q200 approved parts - maximum values. Note: C0G/NP0 ranges on reverse X7R Note: C0G/NP0 ranges on reverse Note: The highlighted parts are defined as `dual-use' under export control legislation and as such are subject to export licence restrictions. Please refer to page 9 for further details. 100pF 120 150 180 220 270 330 390 470 560 680 820 1.0nF 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10nF 12 15 18 22 27 33 39 47 56 68 82 100nF 120 150 180 220 270 330 390 470 560 680 820 1.0F 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10F 12 15 22F e 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 100V 500V 200/250V 25V 50/63V 16V 8060 e 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 100V 500V 200/250V 25V 50/63V 16V 2kV 1.5kV 1.2kV 1kV 630V 100V 500V 200/250V 25V 50/63V 16V 2kV 1.5kV 1.2kV 1kV 630V 500V 100V 200/250V 25V 50/63V 16V 1kV 630V 500V 100V 200/250V 25V 16V 50/63V 100V 500V 200/250V 25V 50/63V 16V X7R 5550 Co d 1808 an c 1210 acit 1206 e e an c Co d acit 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 395 475 565 685 825 106 126 156 226 0805 C ap C ap 100pF 120 150 180 220 270 330 390 470 560 680 820 1.0nF 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10nF 12 15 18 22 27 33 39 47 56 68 82 100nF 120 150 180 220 270 330 390 470 560 680 820 1.0F 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10F 12 15 22F 0603 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 395 475 565 685 825 106 126 156 226 ProtectiCapTM capacitors - X7R MLCCs are particularly suitable for high voltage applications where small size is required. For standard high voltage capacitors a coating may be required to be applied post-soldering, to minimise the risk of flashover from one termination on the chip to the other. By contrast, the new ProtectiCapTM high voltage range has been introduced to specifically address this issue. The integral coating minimises the risk of flashover without any requirement for the customer to apply conformal coating after soldering. This range is fully compliant with the RoHS and WEEE directives. Parts are compatible with lead free solders and standard aqueous and solvent cleaning processes. Tin outer layer ProtectiCapTM anti-flashover coating Operating Temperature -55C to +125C Metal electrodes Intermediate nickel layer FlexiCapTM termination base Temperature Coefficient of Capacitance (Typical) 15% Fired ceramic dielectric Insulation resistance Time constant (Ri xCr) (whichever is the least) 100G or 1000s Minimum/maximum capacitance values - ProtectiCapTM capacitors Chip Size 1206 1210 1808 1812 2220 Min Cap 220pF 680pF 330pF 470pF 1.0nF 2000V 3.3nF 5.6nF 5.6nF 12nF - 2500V 2.7nF 4.7nF 4.7nF 8.2nF 22nF 3000V 1.5nF 3.3nF 3.3nF 4.7nF 10nF 4000V - - 2.2nF 3.3nF 6.8nF 5000V - - - - 4.7nF 7" Reel 2,500 2,000 1,500 500/1,000* 500/1,000* 13" Reel 10,000 8,000 6,000 2,000/4,000* 2,000/4,000* NOTE: Other capacitance values may become available, please contact the sales office if you need values other than those shown in the above table. For dimensions and soldering information, please go to our website (www.syfer.com) or see our MLC Catalogue. *Reel quantity depends on chip thickness. Please contact the Sales Office. Ordering information - ProtectiCapTM capacitors 1206 P 2K0 0102 K X T Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Packaging 1206 1210 1808 1812 2220 P = ProtectiCapTM 2K0 = 2kV 2K5 = 2.5kV 3K0 = 3kV 4K0 = 4kV 5K0 = 5kV First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of 0's following Example 0102 = 1000pF X = X7R (FlexiCapTM termination base with Ni barrier, 100% matte tin plating). T = 178mm (7") reel J = 5% K = 10% M = 20% R = 330mm (13") reel B = Bulk pack - tubs or trays ProtectiCap www.syfer.com | Phone: +44.1603.723300 | 19 TCC/VCC capacitors - X7R TCC/VCC range X7R capacitors are available from Syfer with a defined capacitance variation under applied dc voltage, across the full operating temperature range. Whilst the capacitance of C0G/NP0 chips does not vary with applied voltage, standard X7R capacitors exhibit capacitance fluctuation but with no specified limit. For applications where a limit is required, Syfer is able to offer either a "B" code dielectric (conforms to MIL "BX" dielectric and IECQ-CECC "2X1") or "R" code dielectric (conforms to MIL "BZ" dielectric and IECQ-CECC "2C1"). TCC/VCC capacitors - 2C1 (BZ) Cap 200V 100V 50V 200V 100V 50V 200V 100V 50V 200V 100V 50V 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 e 200V 100V 50V Cod 200V 100V 50V 20 | Phone: +44.1603.723300 | www.syfer.com 100pF 120 150 180 220 270 330 390 470 560 680 820 1.0nF 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1.0F 1.2F 1.5F e 200V 100V 50V = non RoHS compliant and FlexiCapTM termination only. Other values available in J, Y (FlexiCapTM) and F terminations. anc acit 2225 2220 1812 1808 1210 1206 0805 100V 50V Cod 0603 e 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 e anc acit Cap 100pF 120 150 180 220 270 330 390 470 560 680 820 1.0nF 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1.0F 1.2F 1.5F TCC/VCC capacitors - X7R X7R Dielectric characteristics Stable 2C1 2R1 2X1 EIA - X7R - MIL BZ - BX IECQ-CECC Rated temperature range -55C to +125C Maximum capacitance change over temperature range No DC voltage applied Rated DC voltage applied Syfer dielectric ordering code 20% 15% 15% +20-30% - +15-25% R X B For part numbering, the "X" denoting the X7R dielectric code needs to be replaced by either "B" or "R". Please contact the sales office for full range information. TCC/VCC capacitors - 2X1 (BX) Cap 200V 100V 50V 200V 100V 50V 200V 100V 50V 200V 100V 50V 100pF 120 150 180 220 270 330 390 470 560 680 820 1.0nF 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1.0F 1.2F 1.5F 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 e 200V 100V 50V Cod 200V 100V 50V e 200V 100V 50V anc acit 2225 2220 1812 1808 1210 1206 0805 100V 50V Cod 0603 e 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 e anc acit Cap 100pF 120 150 180 220 270 330 390 470 560 680 820 1.0nF 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1.0F 1.2F 1.5F = non RoHS compliant and FlexiCapTM termination only. Other values available in J, Y (FlexiCapTM) and F terminations. www.syfer.com | Phone: +44.1603.723300 | 21 VC1 capacitors - X7R VC1 residual range The VC1 residual capacitance range MLCCs provide a more stable capacitance value with voltage - not to drop below 50% of the 1Vrms 1kHz value, up to full rated DC voltage, at room temperature. They can be operated continuously at full rated voltage, but if de-rated will maintain a larger percentage of their original capacitance value, e.g. at 80% RV capacitance value equals 40% approx - see graph. Defined capacitance value in case sizes from 0805 to 3640, with voltage rating up to 3kV. Ideal for Power supplies, capacitance critical circuits, smoothing circuits and EMI suppression. Operating Temperature -55C to +125C Insulation Resistance at +25C Time constant (Ri xCr) (whichever is the least) 100G or 1000s Temperature Coefficient (Typical) 15% Aging Rate Typically up to 2% per time decade Minimum/maximum capacitance values - VC1 capacitors Chip Size 0805 1206 1210 1808 1812 2220 2225 3640 Min Cap 100pF 150pF 220pF 220pF 470pF 1nF 1nF 2.2nF 250V 12nF 39nF 82nF 82nF 220nF 680nF 1F 1.8F 500V 2.2nF 6.8nF 15nF 15nF 56nF 150nF 220nF 560nF 630V 1.5nF 4.7nF 8.2nF 8.2nF 39nF 100nF 120nF 470nF 1000V 390pF 1.5nF 2.7nF 2.7nF 15nF 39nF 56nF 180nF 1200V - 1nF 2.2nF 2.2nF 10nF 27nF 39nF 120nF 1500V - 560pF 1.2nF 1.2nF 5.6nF 15nF 22nF 68nF 2000V - 270pF 560pF 560pF 3.3nF 10nF 12nF 39nF 2500V - - - - 1.8nF 5.6nF 8.2nF 22nF 3000V - - - - - 3.9nF 5.6nF 12nF NOTE: Other capacitance values may become available, please contact our Sales Office if you need values other than those shown in the above table. For dimensions and soldering information, please go to our website (www.syfer.com). Typical Performance Curves 100% 90% Residual Capacitance 80% 70% 60% 50% 40% 30% 20% 10% 0% 0% 10% 20% 30% 40% 50% 60% 70% Applied Voltage Residual Cap Range 22 | Phone: +44.1603.723300 | www.syfer.com Typical HV X7R 80% 90% 100% VC1 capacitors - X7R Ordering information - VC1 capacitors 1206 Y 1K0 0152 K X T VC1 Capacitance tolerance Dielectric Packaging Suffix X = X7R T = 178mm (7") reel Chip size Termination Voltage Capacitance in picofarads (pF) 0805 1206 1210 1808 1812 2220 2225 3640 Y = FlexiCapTM termination base with nickel barrier (100% matte tin plating). RoHS compliant. 250 = 250V 500 = 500V 630 = 630V 1K0 = 1.0kV 1K2 = 1.2kV 1K5 = 1.5kV 2K0 = 2.0kV 2K5 = 2.5kV 3K0 = 3.0kV First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of 0's following Example: 0152 = 1500pF J = 5% K = 10% M = 20% R = 330mm (13") reel B = Bulk pack - tubs Reeled quantities - VC1 capacitors Chip Size 0805 1206 1210 1812 1812 1812 1812 3640 7" Reel 3,000 2,500 2,000 500/1,000* 500/1,000* 500/1,000* 500/1,000* n/a 13" Reel 12,000 10,000 8,000 2,000/4,000* 2,000/4,000* 2,000/4,000* 2,000/4,000* 500 *Reel quantity depends on chip thickness. Please contact Sales Office. www.syfer.com | Phone: +44.1603.723300 | 23 PSL capacitors - C0G/NP0 & X7R PSL range The PSL range of multilayer ceramic capacitors is suitable for a variety of applications including power supplies, DC-DC converters and LED lighting. This range is manufactured to exacting standards using our unique screen printing process. This provides a high quality component suitable for demanding applications. Operating Temperature -55C to +125C Insulation Resistance at +25C Time constant (Ri xCr) (whichever is the least) 100G or 1000s Temperature Coefficient (Typical) 15% Aging Rate Typically less than 2% per time decade Minimum/maximum capacitance values - PSL capacitors Chip Size Rated Voltage 0805 C0G/NP0 1206 N/A 1nF - 1F N/A 22pF - 5.6nF 1nF - 330nF 22pF - 4.7nF 500V 630V 100V 200V /250V 1kV 1812 C0G/NP0 X7R N/A N/A N/A N/A 22pF - 5.6nF 47pF - 12nF 1nF - 680nF 68pF - 27nF 1nF - 1.5F 1nF - 180nF 22pF - 4.7nF 47pF - 10nF 1nF - 470nF 68pF - 22nF 1nF - 1F 4.7pF - 470pF 220pF - 10nF 10pF - 1.5nF 470pF - 56nF 22pF - 3.3nF 1nF - 100nF 22pF - 3.3nF 47pF - 6.8nF 1nF - 220nF 68pF - 15nF 1nF - 560nF 4.7pF - 220pF 220pF - 5.6nF 1nF - 68nF 22pF - 2.2nF 47pF - 5.6nF 1nF - 150nF 68pF - 12nF 1nF - 330nF 4.7pF - 1.5nF 220pF - 47nF 10pF - 3.3nF 4.7pF - 1nF 220pF - 27nF 10pF - 2.2nF 10pF - 1nF 470pF - 47nF 22pF - 2.2nF C0G/NP0 C0G/NP0 2220 X7R N/A X7R 470pF 470nF 470pF 150nF 470pF 100nF 1808 X7R N/A C0G/NP0 1210 C0G/NP0 50V /63V X7R 220pF 100nF 1nF - 22nF 22pF - 1.5nF 47pF - 4.7nF 1nF - 68nF 68pF - 10nF 1nF - 100nF 1nF - 120nF 22pF - 680pF N/A 22pF - 680pF 47pF - 2.2nF N/A 68pF - 4.7nF N/A 22pF - 470pF 1nF - 4.7nF 1nF - 10nF 68pF - 2.2nF N/A 4.7pF - 100pF 220pF - 3.3nF 10pF - 680pF 470pF - 10nF 22pF - 1.5nF 1.5kV 4.7pF - 68pF N/A 10pF - 390pF 2kV 4.7pF - 33pF N/A 10pF - 220pF 2.5kV N/A N/A 10pF - 100pF N/A 22pF - 150pF N/A 22pF - 270pF 47pF - 680pF N/A 68pF - 1.5nF N/A 3kV N/A N/A 10pF - 68pF N/A 22pF - 100pF N/A 22pF - 220pF 47pF - 470pF N/A 68pF - 1nF N/A N/A 470pF - 1nF 470pF - 2.2nF 22pF - 470pF 47pF - 1nF Note: Other capacitance values may become available, please contact our Sales Office if you need values other than those shown in the above table. For dimensions and soldering information, please go to our website (www.syfer.com). = AEC-Q200 24 | Phone: +44.1603.723300 | www.syfer.com PSL capacitors - C0G/NP0 & X7R Ordering information - PSL capacitors 1206 J 1K0 0103 K J T Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Packaging 0805 1206 1210 1808 1812 2220 J = Nickel barrier with 100% matte tin plating. RoHS compliant. 050 = 50V 063 = 63V 100 = 100V 200 = 200V 250 = 250V 500 = 500V 630 = 630V 1K0 = 1kV 1K5 = 1.5kV 2K0 = 2kV 2K5 = 2.5kV 3K0 = 3kV First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of 0's following Example: 0103 = 10000pF T = 178mm (7") reel Y=FlexiCapTM termination base with nickel barrier (100% matte tin plating). RoHS compliant. Lead free. (X7R only). Note: AEC-Q200 qualified parts only available with FlexiCapTM termination. X7R C0G/NP0 G = C0G/NP0 K = 10% M = 20% F = 1% G = 2% J = 5% K = 10% J = X7R S = X7R AEC-Q200 R = 330mm (13") reel B = Bulk pack - tubs Reeled quantities - PSL capacitors Chip Size 0805 1206 1210 1808 1812 2220 7" Reel 3,000 2,500 2,000 1,500 500/1,000* 500/1,000* 13" Reel 12,000 10,000 8,000 6,000 2,000/4,000* 2,000/4,000* *Reel quantity depends on chip thickness. Please contact our Sales Office. www.syfer.com | Phone: +44.1603.723300 | 25 High Q capacitors - MS range The Syfer High Q MS range offers a very stable, High Q material system that provides excellent, low loss performance in systems below 3GHz. Available in 0402 to 3640 case sizes with various termination options including FlexiCapTM, this range of high frequency capacitors is suitable for many applications where economical, high performance is required. CapCadTM capacitor modelling software is now available for the HiQ range. This software has been developed with an easy to use and readily accessible comparison tool for choosing the best MLCC to suit the customer's needs. Please consult the Syfer website to launch the software. Operating Temperature -55C to +125C Temperature Coefficient (Typical) 0 30 ppm/C Insulation resistance at +25C >100G Insulation resistance at +125C >10G Minimum/maximum capacitance values - High Q capacitors - MS range Chip Size 0402* 0603 0505 0805 1206 1111 1210 1812 2220 2225 3640 0.3pF 0.3pF 1.0pF 2.0pF 2.0pF 4.0pF Min Cap 0.1pF 0.1pF 0.2pF 0.2pF 0.5pF 50V 63V 33pF 220pF 330pF 680pF 2.2nF 100V 22pF 150pF 220pF 470pF 1.5nF 3.3nF 3.3nF 6.8nF 15nF 18nF 150V 18pF 120pF 180pF 390pF 1.2nF 2.7nF 2.7nF 4.7nF 12nF 15nF 200V250V 15pF 100pF 150pF 330pF 1.0nF 2.2nF 2.2nF 3.9nF 10nF 10nF 56pF 100pF 300V 220pF 680pF 1.5nF 1.5nF 3.3nF 6.8nF 8.2nF 100pF 330pF 820pF 820pF 2.2nF 4.7nF 5.6nF 15nF 630V 150pF 390pF 390pF 1.0nF 2.2nF 3.3nF 6.8nF 1000V 82pF 220pF 220pF 680pF 1.5nF 2.2nF 4.7nF 2000V 18pF 68pF 68pF 150pF 470pF 560pF 1.5nF 68pF 150pF 220pF 470pF 7" reel 2500 7" reel 1000 7" reel 2000 7" reel 500/1000 13" reel 2000/4000 7" reel 500/1000 13" reel 2000/4000 7" reel 500/1000 13" reel 2000/4000 13" reel only 500V 3000V Tape quantities 7" reel 5000 7" reel 4000 7" reel 2500 7" reel 3000 13" reel quantities available on request Below 1pF capacitance values are available in 0.1pF steps. Above 1pF capacitance values are available in E24 series values. Other values and taping quantities may be available on request, consult the Sales Office for details. For values < than 0.3pF please consult the Sales Office for availability. *0402 size - please consult the Sales Office for availability. 0603 and 0805 sizes not recommended for new designs. Refer to Ultra-low ESR ranges on page 28. Ordering information - High Q capacitors - MS range 0505 Chip size 0402* 0603 0505 0805 1206 1111 1210 1812 2220 2225 3640 J 250 4P70 B Q T Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Packaging J = Silver base with nickel barrier (100% matte tin plating). RoHS compliant. Lead free. 050 = 50V 063 = 63V 100 = 100V 150 = 150V 200 = 200V 250 = 250V 300 = 300V 500 = 500V 630 = 630V 1K0 = 1kV 2K0 = 2kV 3K0 = 3kV <1.0pF Insert a P for the decimal point as the first character. eg. P300 = 0.3pF Values in 0.1pF steps <4.7pF H = 0.05pF B = 0.1pF C = 0.25pF D = 0.5pF Q = High Q Ceramic T = 178mm (7") reel 1.0pF & <10pF Insert a P for the decimal point as the second character. eg. 8P20 = 8.2pF Values are E24 series <10pF B = 0.1pF C = 0.25pF D = 0.5pF A = Silver base with nickel barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. 26 | Phone: +44.1603.723300 | www.syfer.com 10pF First digit is 0. Second and third digits are significant figures of capacitance code. Fourth digit is number of zeros eg. 0101 = 100pF Values are E24 series 10pF F = 1% G = 2% J = 5% K = 10% R = 330mm (13") reel B = Bulk pack - tubs or trays High Q capacitors - MS range Typical performance data - 0805 chip size* Typical performance data - 1111 chip size* ESR vs Frequency ESR vs Frequency 1 ESR (Ohms) ESR (Ohms) 1 0.1 1pF 4.7pF 10pF 0.1 100pF 0.01 100 1pF 4.7pF 1000 100pF 1000 Frequency (MHz) Frequency (MHz) Q vs Capacitance Q vs Capacitance 100000 10000 10000 1000 1000 Q Q 100000 100 100 10 10 150 MHz 1 0.1 1 500 MHz 150 MHz 1 GHz 10 100 1 1000 0.1 1 Resonant Frequency vs Capacitance 10 1 GHz 100 1000 Resonant Frequency vs Capacitance 100000 Frequency (Mhz) 100000 10000 10000 1000 Series 100 0.1 500 MHz Capacitance (pF) Capacitance (pF) Frequency (Mhz) 10pF 0.01 100 1 1000 Parallel 10 Capacitance (pF) Series 100 1000 100 0.1 1 Parallel 10 100 1000 Capacitance (pF) * Please refer to the Sales Office for other chip size electrical data. www.syfer.com | Phone: +44.1603.723300 | 27 Ultra-low ESR capacitors - C0G/NP0 The Ultra-low ESR range offers a very stable, High Q material system that provides excellent, low loss performance in systems below 3GHz. Available with various termination options including FlexiCapTM, this range of high frequency capacitors is suitable for many applications where economical, high performance is required. 0603 S-parameter downloads are available from: http://www.knowlescapacitors.com/syfer/en/products/mlccapacitors/ultra-low-esr-capacitors and the Syfer MVP page on the Modelithics website. Please visit the Syfer MVP page for more information at: http://www.modelithics.com/mvp/syfer Operating Temperature -55C to +125C Temperature Coefficient (Typical) 0 30 ppm/C Insulation resistance Time constant (Ri xCr) (whichever is the least) 100G or 1000s Minimum/maximum capacitance values - Ultra-low ESR capacitors Chip Size 0603 0805 Min Cap 0.1pF 0.2pF 200V250V 100pF 240pF Tape quantities 7" reel - 4,000 7" reel - 3,000 13" reel - 16,000 13" reel - 12,000 Note: Below 1pF capaciitance values are available in 0.1pF steps. Above 1pF capacitance values are available in E24 series values. Other values and taping quantities may be available on request, consult the Sales Office for details. Typical performance 0603 `U' Series ESR vs. Frequency 0805 `U' Series ESR vs. Frequency 1 ESR/Ohms ESR/Ohms 1 0.1 0.01 0 500 1000 1500 0.1 0.5pF 3pF 1.5pF 5.6pF 10pF 33pF 15pF 10pF 47pF 27pF 2000 2500 0.01 3000 0 500 1000 1500 f/MHz 2000 2500 3000 f/MHz Ordering information - Ultra-low ESR capacitors 0805 Chip size 0603 0805 J 250 0101 J U T Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Packaging J = Silver base with nickel barrier (100% matte tin plating). RoHS compliant. Lead free. 200 = 200V 250 = 250V <1.0pF Insert a P for the decimal point as the first character. eg. P300 = 0.3pF Values in 0.1pF steps <4.7pF H = 0.05pF B = 0.1pF C = 0.25pF D = 0.5pF U = Ultra-low ESR T = 178mm (7") reel 1.0pF & <10pF Insert a P for the decimal point as the second character. eg. 8P20 = 8.2pF Values are E24 series <10pF B = 0.1pF C = 0.25pF D = 0.5pF A = Silver base with nickel barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. 10pF First digit is 0. Second and third digits are significant figures of capacitance code. Fourth digit is number of zeros eg. 0101 = 100pF Values are E24 series 28 | Phone: +44.1603.723300 | www.syfer.com 10pF F = 1% G = 2% J = 5% K = 10% R = 330mm (13") reel B = Bulk pack - tubs or trays StackiCapTM capacitors - X7R The StackiCapTM range offers a significant reduction in `PCB real estate' for an equivalent capacitance value when board space is at a premium. Syfer's unique patent pending* construction and FlexiCapTM termination material make the StackiCapTM range suitable for applications including: power supplies, lighting, aerospace electronics and high voltage applications where a large amount of capacitance is required. Further developments are on-going, please contact the Sales Office for details of the full range. * Patent application No. 1210261-2 applies. Maximum capacitance Up to 5.6F Maximum voltage Up to 2kV Comparison chart - StackiCapTM capacitors Chip Size Voltage StackiCapTM values (nF)* 200/250V 1000 680 2220 500V 470 330 2220 630V 330 180 2220 1kV 180 100 2225 / 3640 1812 2220 3640 Non- StackiCapTM range (nF) Replaces Case Size 1.2kV 100 33 2225 1.5kV 56 22 2225 200/250V 2200 1000 3640 500V 1000 560 3640 630V 1000 330 5550 1kV 470 120 8060 1.2kV 220 82 5550 1.5kV 150 47 5550 2kV 100 27 8060 200/250V 5600 3300 5550 500V 2700 1000 8060 630V 2200 680 8060 1kV 1000 180 8060 1.2kV 470 150 8060 1.5kV 330 100 8060 2kV 150 47 8060 = AEC-Q200. *Other capacitance values available. Please consult the Sales Office. Ordering information - StackiCapTM capacitors 1812 Y 500 0474 J X T WS2 Capacitance in picofarads (pF) Capacitance tolerance Dielectric Packaging Suffix code First digit is 0. Second and third digits are significant figures of capacitance code in picofarads (pF). Fourth digit is number of zeros J = 5% K = 10% M = 20% X = X7R T = 178mm (7") reel WS2 Chip size Termination Voltage 1812 2220 3640 Y = FlexiCapTM termination base with nickel barrier (100% matte tin plating). RoHS compliant. Lead free. 200/250 = 200/250V 500 = 500V 630 = 630V 1K0 = 1kV 1K2 = 1.2kV 1K5 = 1.5kV 2K0 = 2kV H = FlexiCapTM Termination base with nickel barrier (Tin/lead plating with minimum 10% lead). Not RoHS compliant. eg. 0474 = 470nF Values are E12 series Reeled quantities - StackiCapTM capacitors 1812 2220 3640 178mm (7") Reel 500/1,000 500/1,000 - 330mm (13") Reel 2,000/4,000 2,000/4,000 500 E = X7R (2R1) AEC-Q200 R = 330mm (13") reel B = Bulk pack tubs or trays StackiCap www.syfer.com | Phone: +44.1603.723300 | 29 Non-magnetic capacitors - C0G/NP0, High Q, X7R Multilayer ceramic capacitors with silver/palladium (Ag/Pd) terminations have often been used in medical applications where non-magnetic components are required, for example in MRI equipment. The use of conventional nickel barrier terminations is not suitable due to nickel exhibiting magnetic properties. However, RoHS requirements have dictated the use of lead-free solders, and the composition of these solders has resulted in an increase in soldering temperatures. This has caused solder leaching problems for the Ag/Pd termination, and meant alternative terminations have had to be found. As copper is non-magnetic, one solution is to use a copper barrier instead of a nickel barrier, with a tin finish on top and this is the solution Syfer has developed. This Non-magnetic termination is offered with selected nonmagnetic C0G/NP0, High Q and X7R dielectrics, providing a fully non-magnetic component (r = 1.0000). To meet high temperature 260C soldering reflow profiles as detailed in J-STD-020, C0G/NP0 dielectrics are supplied with FlexiCapTM or sintered termination and X7R dielectrics are supplied with Syfer's award winning FlexiCapTM termination. C0G/NP0 & High Q - minimum/maximum capacitance values Chip Size 0402* 0603 0505 0805 1206 Min Cap 0.1pF 0.1pF 0.2pF 0.2pF 0.5pF Min Cap Tolerance 1111 1210 0.3pF 1808 1812 2220 2225 1.0pF 1.0pF 2.0pF 2.0pF 0.05pF (<4.7pF), 0.1pF (>4.7pF & <10pF) and 1% (>10pF) 50V 63V 22pF 100pF 220pF 470pF 1.5nF - - - - - 100V 15pF 68pF 150pF 330pF 1.0nF 2.2nF 2.2nF 4.7nF 10nF 15nF 150V 10pF 47pF 100pF 220pF 680pF 1.5nF 1.5nF 3.3nF 6.8nF 10nF 200V250V 6.8pF 33pF 56pF 150pF 470pF 1.0nF 1.0nF 2.2nF 4.7nF 6.8nF 300V - 27pF 47pF 120pF 390pF 820pF 820pF 1.8nF 3.9nF 5.6nF 500V - - - 68pF 270pF 680pF 680pF 1.5nF 3.3nF 4.7nF 630V - - - - 150pF 390pF 390pF 1.0nF 2.2nF 3.3nF 1000V - - - - 82pF 220pF 220pF 680pF 1.5nF 2.2nF 2000V - - - - 18pF 68pF 68pF 150pF 470pF 560pF 3000V - - - - - - - 68pF 150pF 220pF For values < than 0.3pF please consult the Sales Office for availability. *0402 - please consult the sales office for availability. X7R - minimum/maximum capacitance values Chip Size 0402* 0603 0805 1206 1210 1808 1812 2220 2225 Min Cap 47pF 100pF 330pF 680pF 1.5nF 2.2nF 3.3nF 6.8nF 10nF Min Cap Tolerance 5% 16V 10nF 100nF 330nF 1.0F 1.5F 1.5F 3.3F 5.6F 6.8F 25V 6.8nF 68nF 220nF 820nF 1.2F 1.2F 2.2F 4.7F 5.6F 50V 63V 4.7nF 47nF 150nF 470nF 1.0F 680nF 1.5F 3.3F 3.3F 100V 1.5nF 10nF 47nF 150nF 470nF 330nF 1.0F 1.5F 1.5F 200V250V 680pF 5.6nF 27nF 100nF 220nF 180nF 470nF 1.0F 1.0F 500V - 1.5nF 8.2nF 33nF 100nF 100nF 270nF 560nF 680nF 630V - - 4.7nF 10nF 27nF 33nF 150nF 330nF 390nF 1000V - - 3.3nF 4.7nF 15nF 18nF 56nF 120nF 150nF 1200V - - - 3.3nF 10nF 10nF 33nF 82nF 100nF 1500V - - - 2.7nF 6.8nF 6.8nF 22nF 47nF 68nF 2000V - - - 2.2nF 4.7nF 4.7nF 10nF 27nF 33nF *0402 - please consult the factory for availability. 30 | Phone: +44.1603.723300 | www.syfer.com Non-magnetic capacitors - C0G/NP0, High Q, X7R Ordering information - Non-magnetic capacitors 1210 3 100 0103 J X T ___ Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric codes Packaging Suffix code 2 = Sintered silver base with copper barrier (100% matte tin plating). RoHS compliant. (Available on C0G/NP0 & High Q only). 016 = 16V 025 = 25V 050 = 50V 063 = 63V 100 = 100V 150 = 150V 200 = 200V 250 = 250V 500 = 500V 630 = 630V 1K0 = 1kV 1K2 = 1.2kV 1K5 = 1.5kV 2K0 = 2kV 3K0 = 3kV <10pF Insert a P for the decimal point, eg. P300 = 0.3pF, 8P20 = 8.2pF. <4.7pF H = 0.05pF B = 0.1pF C = 0.25pF D = 0.5pF C = C0G/NP0 (1B) T = 178mm (7") reel Q = High Q R = 330mm (13") reel Used for specific customer requirements 0402* 0603 0505 0805 1206 1111 1210 1808 1812 2220 2225 3 = FlexiCapTM base with copper barrier (100% matte tin plating). RoHS compliant. 4 = Sintered silver base with copper barrier (tin/lead plating). Non RoHS compliant. (Available on C0G/NP0 & High Q only). 5 = FlexiCapTM base with copper barrier (tin/lead plating). Non RoHS compliant. 10pF 1st digit is 0. 2nd and 3rd digits are significant figures of capacitance code. The 4th digit is number of 0's following eg. 0103 = 10000pF X = X7R (2R1) 4.7pF & <10pF B = 0.1pF C = 0.25pF D = 0.5pF B = Bulk pack - tubs or trays 10pF F = 1% G = 2% J = 5% K = 10% M = 20% Values <1pF in 0.1pF steps, above this values are E24 series *0402 - please consult the sales office for availability. Reeled Quantities Chip Size 0402* 0603 0505 0805 1206 7" Reel 5000 4000 2500 3000 2500 13" Reel 1111 1210 10002000 13" reel quantities available on request 1808 1812 2220 2225 2000 500/1000 500/1000 500/1000 8000 2000/4000 2000/4000 2000/4000 Note: Other capacitance values may become available, please contact our Sales Office if you need values other than those shown in the above tables. For dimensions and soldering information, please go to our website (www.syfer.com) or see our MLC catalogue. Typical performance data - 0805 chip size Typical performance data - 1111 chip size ESR vs Frequency ESR vs Frequency 1 ESR (Ohms) ESR (Ohms) 1 0.1 1pF 4.7pF 10pF 0.1 1pF 100pF 0.01 100 4.7pF 100pF 1000 Frequency (MHz) Frequency (MHz) Q vs Capacitance Q vs Capacitance 100000 10000 10000 1000 1000 Q Q 100000 100 100 10 10 150 MHz 1 0.1 1 500 MHz 10 150 MHz 1 GHz 100 1 1000 0.1 1 Resonant Frequency vs Capacitance 10 1 GHz 100 1000 Resonant Frequency vs Capacitance 100000 Frequency (Mhz) 100000 10000 10000 1000 Series 100 0.1 500 MHz Capacitance (pF) Capacitance (pF) Frequency (Mhz) 10pF 0.01 100 1000 1 1000 Parallel 10 Capacitance (pF) Series 100 1000 100 0.1 1 Parallel 10 100 1000 Capacitance (pF) www.syfer.com | Phone: +44.1603.723300 | 31 Non-magnetic Ribbon Leaded capacitors - C0G/NP0, High Q, X7R Capacitance values 1pF to 27nF (High Q) Chip sizes 2225 and 4040 Operating temperature -55C to +125C High Q low ESR dielectrics (other options available) Insulation Resistance (IR) 100Gohm min @ 100 Vdc or 1000s (whichever is the less) DWV up to 8400Vdc Termination material Silver plated copper ribbon attached with HMP solder (MP greater than 260C) 4040 11.5 max 8.90.5 35 typ (0.45 max) 12.0 max (0.473 max) (0.350.02) 9.3 max (0.366 max) 7.5 max (0.30 max) 5.50.5 (0.220.02) 2225 50 typ (1.378 typ) +0.10 0.25 -0.05 (0.01 +0.004 -0.002 ) (0.197 max) ( +0.10 0.25 -0.05 +0.004 0.01 -0.002 5.0 max ) 4.40.5 (0.173 max) (1.97 typ) Min/max capacitance values Case size 25 2225 Chip Size 200V Case size 40 4040 Min. Max. Min. Max. 6.2nF 10nF 16nF 27nF 500V 5.1nF 5.6nF 13nF 15nF 630V 3.9nF 4.7nF 12nF 12nF 1kV 1.2nF 3.3nF 5.6nF 10nF 2kV 510pF 1.0nF 1.6nF 5.1nF 3kV 1pF 47pF* / 470pF 910pF 1.5nF 4kV - - 620pF 820pF 5kV - - 390pF 560pF 6kV - - 160pF 330pF 7.2kV - - 1pF 56pF** / 150pF *2225 - 47pF max. for dual rated @2.5kVac 30MHz **4040 - 56pF max. for dual rated @5kVac 30MHz. Ordering information - Non-magnetic Ribbon Leaded capacitors 4040 B 7K0 0470 G Q B Lead options Variant code Chip size Coating Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Packing R W001 2225 4040 B = Uncoated 200 = 200V 500 = 500V 1K0 = 1kV 2K0 = 2kV 3K0 = 3kV 5K0 = 5kV 7K0 = 7kV <10pF Insert a P for the decimal point, eg 2P20 = 2.2pF. <10pF B = 0.10pF C = 0.25pF D = 0.50pF C = C0G/NP0 (1B) B = Bulk packed R = Ribbon Leaded W001 = Standard Variant >10pF. 1st digit is 0. 2nd and 3rd digits are significant figures of capacitance code. The 4th digit is number of 0's following eg. 0470 = 47pF 0512 = 5100pF 32 | Phone: +44.1603.723300 | www.syfer.com 10pF G = 2% J = 5% K = 10% M = 20% Q = High Q X = X7R (2R1) Open Mode and Tandem capacitors - X7R Open Mode capacitors have been designed specifically for use in applications where mechanical cracking is a severe problem and short circuits due to cracking are unacceptable. Open Mode capacitors use inset electrode margins, which prevent any mechanical cracks which may form during board assembly from connecting to the internal electrodes. When combined with Syfer's FlexiCapTM termination, Syfer Open Mode capacitors provide a robust component with the assurance that if a part becomes cracked, the crack will be unlikely to result in short circuit failure. Open Mode max capacitance (X7R only) 0603 0805 1206 1210 1808 1812 2220 2225 16V 39nF 150nF 470nF 680nF 680nF 1.5F 3.3F 4.7F 25V 33nF 120nF 330nF 560nF 560nF 1.2F 2.2F 3.9F 50/63V 22nF 100nF 220nF 470nF 470nF 1.0F 1.5F 2.7F 100V 200/ 250V 500V 6.8nF 27nF 100nF 220nF 220nF 680nF 1.0F 1.8F 2.7nF 15nF 68nF 100nF 100nF 330nF 680nF 1.0F - 5.6nF 27nF 68nF 68nF 180nF 330nF 330nF 630V - - 10nF 27nF 27nF 82nF 180nF 180nF 1kV - - 4.7nF 15nF 15nF 33nF 82nF 100nF = AEC-Q200 Open Mode capacitor - Qualification included cracking the components by severe bend tests. Following the bend tests cracked components were subjected to endurance / humidity tests, with no failures evident due to short circuits. Note: Depending on the severity of the crack, capacitance loss was between 0% and 70%. Tandem Capacitors have been designed as a fail safe range using a series section internal design, for use in any application where short circuits would be unacceptable. When combined with Syfer's FlexiCapTM termination, Syfer Tandem capacitors provide an ultra robust and reliable component, for use in the most demanding applications. Non-standard voltages are available. For more information please consult the sales office. Tandem max capacitance (X7R only) 0603 0805 1206 1210 1812 2220 2225 16V 12nF 47nF 150nF 270nF 560nF 1.2F 25V 10nF 39nF 120nF 220nF 470nF 1.0F 1.5F 1.2F 50/63V 6.8nF 33nF 100nF 180nF 390nF 680nF 1.0F 100V 200/ 250V 2.2nF 10nF 47nF 82nF 220nF 470nF 680nF 1.0nF 4.7nF 22nF 47nF 100nF 220nF 330nF Tandem capacitor - = AEC-Q200 Qualification included cracking the components by severe bend tests. Following the bend tests cracked components were subjected to endurance / humidity tests, with no failures evident due to short circuits. Note: Depending on the severity of the crack, capacitance loss was between 0% and 50%. Ordering information - Open Mode and Tandem capacitors 1206 Y 050 0224 K X T ___ Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric codes Packaging Suffix code 0603 0805 1206 1210 1808 1812 2220 2225 Y = FlexiCapTM termination base with nickel barrier (100% matte tin plating). RoHS compliant. 016 = 16V 025 = 25V 050 = 50V 063 = 63V 100 = 100V 200 = 200V 250 = 250V 500 = 500V 630 = 630V 1K0 = 1kV First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following. J = 5% K = 10% M = 20% X = X7R E = X7R (AEC-Q200 product) T = 178mm (7") reel M01 = Syfer Open Mode capacitor Example: 0224 = 220000pF R = 330mm (13") reel B = Bulk pack tubs or trays T01 = Syfer Tandem capacitor www.syfer.com | Phone: +44.1603.723300 | 33 IECQ-CECC range - Specialty High Rel. and approved parts IECQ-CECC, AEC-Q200 and Space grade range A range of specialist, high reliability, multilayer ceramic capacitors for use in critical or high reliability environments. All fully tested / approved and available with a range of suitable termination options, including tin/lead plating and Syfer FlexiCapTM. Ranges include :1. Range tested and approved in accordance with IECQ-CECC QC32100. 2. Range qualified to the requirements of AEC-Q200. 3. Range qualified to the requirements of Syfer detail specification S02A-0100 (based on ESCC 3009). IECQ-CECC - maximum capacitance values 0603 16V 25V 50/63V 100V 200/ 250V 500V 1kV 0805 1206 1210 1808 1812 2220 2225 C0G/NP0 1.5nF 6.8nF 22nF 33nF 33nF 100nF 150nF 220nF X7R 100nF 330nF 1.0F 1.5F 1.5F 3.3F 5.6F 6.8F C0G/NP0 1.0nF 4.7nF 15nF 22nF 27nF 68nF 100nF 150nF X7R 56nF 220nF 820nF 1.2F 1.2F 2.2F 4.7F 5.6F C0G/NP0 470pF 2.7nF 10nF 18nF 18nF 33nF 68nF 100nF X7R 47nF 220nF 470nF 1.0F 680nF 1.5F 2.2F 3.3F C0G/NP0 330pF 1.8nF 6.8nF 12nF 12nF 27nF 47nF 68nF X7R 10nF 47nF 150nF 470nF 330nF 1.0F 1.5F 1.5F C0G/NP0 100pF 680pF 2.2nF 4.7nF 4.7nF 12nF 22nF 27nF X7R 5.6nF 27nF 100nF 220nF 180nF 470nF 1.0F 1.0F C0G/NP0 n/a 330pF 1.5nF 3.3nF 3.3nF 10nF 15nF 22nF X7R n/a 8.2nF 33nF 100nF 100nF 270nF 560nF 820nF C0G/NP0 n/a n/a 470pF 1.0nF 1.2nF 3.3nF 8.2nF 10nF X7R n/a n/a 4.7nF 15nF 18nF 56nF 120nF 150nF Ordering information - IECQ-CECC and AEC-Q200 range 1210 Chip size 0603 0805 1206 1210 1808 1812 1825 2220 2225 3640 Y 100 0103 J D T ___ Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Release codes Packaging Suffix code Y = FlexiCapTM termination base with Ni barrier (100% matte tin plating). RoHS compliant. 016 = 16V 025 = 25V 050 = 50V 063 = 63V 100 = 100V 200 = 200V 250 = 250V 500 = 500V 630 = 630V 1K0 = 1kV 1K2 = 1.2kV 1K5 = 1.5kV 2K0 = 2kV 2K5 = 2.5kV 3K0 = 3kV First digit is 0. <10pF B = 0.1pF C = 0.25pF D = 0.5pF > 10pF D = X7R (2R1) with IECQ-CECC release T = 178mm (7") reel Used for specific customer requirements H = FlexiCapTM termination base with Ni barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. F = Silver Palladium. RoHS compliant. J = Silver base with nickel barrier (100% matte tin plating). RoHS compliant. A = Silver base with nickel barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following Example: 0103 = 10nF F = 1% G = 2% J = 5% K = 10% M = 20% F = C0G/NP0 (1B/NP0) with IECQCECC release B = 2X1/BX released in accordance with IECQ-CECC R = 2C1/BZ released in accordance with IECQ-CECC For B and R codes please refer to TCC/ VCC range for full capacitance values E = X7R (2R1) AEC-Q200 A = C0G/NP0 (1B/NP0) AEC-Q200 T = X8R with AEC-Q200 release 34 | Phone: +44.1603.723300 | www.syfer.com R = 330mm (13") reel B = Bulk pack - tubs or trays AEC-Q200 range - Specialty High Rel. and approved parts AEC-Q200 range - maximum capacitance values 50/63V 100V 200/ 250V 500V 630V 1kV 1.2kV 0603 0805 1206 1210 1808 1812 1825 2220 2225 3640 C0G/NP0 470pF 2.7nF 10nF 18nF n/a 39nF 68nF 68nF 100nF 220nF X7R 33nF 150nF 330nF 680nF n/a 1.5F 1.8F 3.3F 3.3F 4.7F X8R n/a 33nF 120nF 220nF 270nF 470nF n/a 680nF 1.0F n/a C0G/NP0 330pF 1.8nF 6.8nF 12nF n/a 27nF 47nF 47nF 68nF 180nF X7R 10nF 47nF 150nF 470nF n/a 1F 1.2F 1.5F 1.5F 3.3F X8R n/a 15nF 56nF 120nF 150nF 220nF n/a 470nF 560nF n/a C0G/NP0 100pF 680pF 2.2nF 4.7nF n/a 12nF 22nF 22nF 27nF 82nF X7R 5.6nF 27nF 100nF 220nF n/a 470nF 1.0F 1.0F 1.0F 1.5F X8R n/a 10nF 33nF 68nF 82nF 120nF n/a 220nF 330nF n/a C0G/NP0 n/a 330pF 1.5nF 3.9nF n/a 10nF 15nF 15nF 22nF 56nF X7R n/a 8.2nF 33nF 100nF n/a 270nF 560nF 560nF 680nF 1.0F X8R n/a 3.9nF 18nF 39nF 47nF 100nF n/a 180nF 270nF n/a C0G/NP0 n/a n/a 1.0nF 1.8nF n/a 5.6nF 8.2nF 10nF 15nF 39nF X7R n/a n/a 10nF 27nF n/a 150nF 180nF 330nF 390nF 680nF X8R n/a 1.8nF 3.9nF 10nF 12nF 33nF n/a 150nF 180nF n/a C0G/NP0 n/a n/a 470pF 1nF n/a 3.3nF 4.7nF 8.2nF 10nF 22nF X7R n/a n/a 4.7nF 15nF n/a 56nF 120nF 120nF 150nF 180nF X8R n/a 1nF 2.2nF 4.7nF 5.6nF 18nF n/a 39nF 56nF n/a C0G/NP0 n/a n/a 220pF 680pF n/a 3.3nF 3.9nF 4.7nF 6.8nF 18nF X7R n/a n/a 3.3nF 10nF n/a 33nF 68nF 82nF 100nF 150nF X8R n/a n/a 1.8nF 3.9nF 4.7nF 12nF n/a 33nF 39nF n/a C0G/NP0 n/a n/a 150pF 470pF n/a 2.2nF 2.7nF 3.3nF 4.7nF 12nF X7R n/a n/a 2.7nF 6.8nF n/a 22nF 47nF 47nF 68nF 100nF X8R n/a n/a 1.2nF 2.2nF 2.7nF 8.2nF n/a 22nF 27nF n/a C0G/NP0 n/a n/a 100pF 220pF n/a 1.5nF 1.2nF 1.8nF 2.2nF 5.6nF X7R n/a n/a 2.2nF 4.7n n/a 10nF 10nF 27nF 33nF 47nF X8R n/a n/a 470pF 1.2nF 1.8nF 4.7nF n/a 12nF 18nF n/a 2.5kV X8R n/a n/a n/a n/a 1.0nF 2.7nF n/a 6.8nF 10nF n/a 3kV X8R n/a n/a n/a n/a 680pF 2.2nF n/a 4.7nF 5.6nF n/a 1.5kV 2kV 3 Terminal EMI Components (E01) & (E07) - AEC-Q200 range - maximum capacitance values E01 0805 50V 100V 1206 E07 1806 0805 1206 1806 C0G/NP0 820pF 1.0nF 2.2nF 220pF 1nF 1.5nF X7R 47nF 100nF 200nF 47nF 100nF 200nF C0G/NP0 560pF 1.0nF 2.2nF 120pF 560pF 680pF X7R 15nF 15nF 68nF 15nF 15nF 68nF Note: For some lower capacitance parts, higher voltage rated parts may be supplied. Please refer to page 44. X2Y Integrated Passive Components (E03) - AEC-Q200 range - capacitance values 50V 100V C0G/NP0 0805 1206 1410 1812 390pF - 470pF 1.2nF - 1.5nF 4.7nF - 5.6nF 8.2nF - 10nF X7R 18nF - 33nF 56nF - 150nF 180nF - 330nF 390nF- 560nF C0G/NP0 10pF - 330pF 22pF - 1.0nF 100pF - 3.9nF 820pF - 6.8nF X7R 470pF - 15nF 1.5nF - 47nF 4.7nF - 150nF 8.2nF - 330nF Note: For some lower capacitance parts, higher voltage rated parts may be supplied. Please refer to page 46. www.syfer.com | Phone: +44.1603.723300 | 35 S02A Space grade range - Specialty High Rel. and approved parts S02A Space grade range - minimum/maximum capacitance values 0603 0805 1206 1210 1812 2220 2225 C0G/NP0 390pF - 1.5nF 1pF - 6.8nF 1pF - 22nF 10pF - 33nF 220pF - 100nF 470pF - 150nF 560pF - 220nF X7R 330pF - 100nF 100pF - 330nF 680pF - 1.0F 1.0nF - 1.5F 3.9nF - 3.3F 10nF - 5.6F 18nF - 6.8F C0G/NP0 390pF - 1.0nF 1pF - 4.7nF 1pF - 15nF 10pF - 22nF 220pF - 68nF 470pF - 100nF 560pF - 150nF X7R 330pF - 56nF 100pF - 220nF 680pF - 820nF 1.0nF - 1.2F 3.9nF - 2.2F 10nF - 4.7F 18nF - 5.6F C0G/NP0 0.5pF - 470pF 1pF - 2.7nF 1pF - 10nF 10pF - 18nF 220pF - 39nF 470pF - 68nF 560pF - 100nF X7R 330pF - 47nF 100pF - 220nF 680pF - 470nF 1.0nF - 1.0F 3.9nF - 2.2F 10nF - 3.3F 18nF - 3.3F C0G/NP0 1pF - 330pF 1pF - 1.8nF 1pF - 6.8nF 10pF - 12nF 220pF - 27nF 470pF - 47nF 560pF - 68nF X7R 100pF - 10nF 100pF - 47nF 100pF - 150nF 1.0nF - 470nF 3.9nF - 1.0F 10nF - 1.5F 18nF - 1.5F C0G/NP0 1pF - 100pF 1pF - 680pF 1pF - 2.2nF 10pF - 4.7nF 220pF - 12nF 470pF - 22nF 560pF - 27nF X7R 100pF - 5.6nF 100pF - 27nF 100pF - 100nF 1.0nF - 220nF 3.9nF - 470nF 10nF - 1.0F 18nF - 1.0F C0G/NP0 - 1pF - 270pF 1pF - 1.2nF 10pF - 2.7nF 180pF - 6.8nF 390pF - 15nF 4.7nF - 18nF X7R - 10pF - 8.2nF 180pF - 33nF 390pF - 100nF 390pF - 270nF 1nF - 560nF 15nF - 820nF 16V 25V 50/63V 100V 200V 500V Note: In accordance with ESCC 3009. Ordering information - S02A Space grade range - product code construction 1210 A 100 0103 J X T ____ Chip size Termination(1) Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Rel Release codes Packaging Suffix code Y = FlexiCapTM termination base with nickel barrier (100% matte tin plating). RoHS compliant. 016 = 16V 025 = 25V 050 = 50V 063 = 63V 100 = 100V 200 = 200V 500 = 500V First digit is 0. Second and third digits are significant figures of capacitance code. <10pF B = 0.1pF C = 0.25pF D = 0.5pF C = C0G/NP0 (1B) T = 178mm (7") reel X = X7R (2R1) R = 330mm (13") reel Used for specific customer requirements 0603 0805 1206 1210 1812 2220 2225 H = FlexiCapTM termination base with nickel barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. F = Silver Palladium. RoHS compliant. The fourth digit is number of zeros following Example: 0103 = 10nF > 10pF F = 1% G = 2% J = 5% K = 10% M = 20% B = Bulk pack tubs or trays Q = Waffle pack A = Silver base with nickel barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. Available in C0G/NP0 only. Notes: (1) Termination A, H & F available for Space applications. If another termination type is required then contact the sales office. (2) Please include Lot Acceptance Test requirement (LAT1, LAT2 or LAT3) on purchase order against each line item. Tests conducted after 100% Burn-In (2xRV @125C for 168 hours). LAT1: 4 x adhesion, 8 x rapid temp change + LAT2 and LAT3. LAT2: 20 x 1000 hour life test + LAT3. LAT3: 6 x TC and 4 x solderability. (3) S02A Space Grade Options S02A: with LAT1 (also incorporates LAT2 & LAT3). S02A: with LAT2 (also incorporates LAT3). S02A: with LAT3. S02A: No LAT conducted. S02A5: S02A design with 100% visual inspection and 100% electrical test verification. No screening tests (including no burn in). No LAT tests etc. These are typically ordered for Engineering Models. 36 | Phone: +44.1603.723300 | www.syfer.com S02A = S (Space Grade) High Rel Safety Certified capacitors Safety Certified capacitors Syfer Technology's Safety Certified capacitors comply with international UL and TUV specifications to offer designers the option of using a surface mount ceramic multilayer capacitor to replace leaded film types. Offering the benefits of simple pick-and-place assembly, reduced board space required and lower profile, they are also available in a FlexiCapTM version to reduce the risk of mechanical cracking. Syfer's high voltage capacitor expertise means the range offers among the highest range available of capacitance values in certain case sizes. Applications include: modems, AC-DC power supplies and where lightning strike or other voltage transients represent a threat to electronic equipment. Surface mount multilayer ceramic capacitors Meet Class Y2/X1, X1 and X2 requirements Approved for mains ac voltages, up to 250Vac Approved by UL and TUV Sizes 1808, 1812, 2211, 2215 and 2220 Smaller sizes suitable for use in equipment certified to EN60950 Certification specifications for larger sizes include IEC/EN60384-14, UL/CSA60950 and UL60384-14 Surface mount package Reduces board area and height restrictions Reduced assembly costs over conventional through hole components FlexiCapTM option available on all sizes Specific parts qualified to AEC-Q200 Class Rated voltage Impulse voltage Insulation bridging May be used in primary circuit Y1 250Vac 8000V Double or reinforced Line to protective earth Y2 250Vac 5000V Basic or supplementary* Line to protective earth Y4 150Vac 2500V Basic or supplementary* Line to protective earth X1 250Vac 4000V - Line to line X2 250Vac 2500V - Line to line X3 250Vac None - Line to line * 2 x Y2 or Y4 rated may bridge double or reinforced insulation when used in series. www.syfer.com | Phone: +44.1603.723300 | 37 Safety Certified capacitors - Certification Chart Classification and approval specification - Safety Certified capacitors CHIP SIZE DIELECTRIC 1808 C0G/NP0 1808 X7R 1808 C0G/NP0 1808 X7R CAP RANGE 4.7pF to 1.5nF 150pF to 4.7nF 4.7pF to 390pF 150pF to 1nF std. term.* >1nF to 1.5nF P term. only 4.7pF to 390pF 1812 C0G/NP0 4.7pF to 470pF 1812 X7R 2211 C0G/NP0 2211 X7R 2215 C0G/NP0 2215 X7R 150pF to 2.2nF std. term.* >2.2nF to 4.7nF P term. only 4.7pF to 1nF 100pF to 3.9nF 820pF to 1.0nF 2.7nF to 3.9nF SYFER FAMILY CODE SP (1) SP (1) PY2 (1) PY2 (1,3) PY2 (1) PY2 (1,4) SP (2) SP (2) SP (2) SP (2) CLASSIFICATION APPROVAL SPECIFICATION APPROVAL BODY X2 IEC60384-14 EN60384-14 TUV NWGQ2, NWGQ8 UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL X2 IEC60384-14 EN60384-14 TUV NWGQ2, NWGQ8 UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL X1 IEC60384-14 EN60384-14 TUV NWGQ2, NWGQ8 UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL X1 IEC60384-14 EN60384-14 TUV NWGQ2, NWGQ8 UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL X1 IEC60384-14 EN60384-14 TUV NWGQ2, NWGQ8 UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL X1 IEC60384-14 EN60384-14 TUV NWGQ2, NWGQ8 UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL Y2/X1 IEC60384-14 EN60384-14 TUV NWGQ2, NWGQ8 UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL Y2/X1 IEC60384-14 EN60384-14 TUV NWGQ2, NWGQ8 UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL Y2/X1 IEC60384-14 EN60384-14 TUV NWGQ2, NWGQ8 UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL Y2/X1 IEC60384-14 EN60384-14 TUV NWGQ2, NWGQ8 UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL IEC60384-14 EN60384-14 TUV Y2/X1, FOWX2, FOWX8 UL-60384-14:2010 CSA E60384-14:09 UL X2 IEC60384-14 EN60384-14 TUV (2) 2220 2220 X7R X7R 150pF to 5.6nF 150pF to 22nF std. term.* >22nF to 33nF P term. only B16 B17 (2,5) Y2/X1 (1) Notes Termination availability (1) J & Y terminations only. (2) J, Y, A & H terminations available. (3) For cap values >1000pF available in "P" ProtectiCapTM termination only. (4) For cap values >2200pF available in "P" ProtectiCapTM termination only. (5) B17 values above 22nF available in "P" ProtectiCapTM termination only. PY2 Unmarked capacitors also available as released in accordance with approval specifications. Family code SY2 applies. SP Unmarked capacitors also available as released in accordance with approval specifications. Family code SPU applies. Capacitance values in red qualified to AEC-Q200. *std. term. = Standard Termination. 38 | Phone: +44.1603.723300 | www.syfer.com AEC-Q200 TUV & UL FULL RANGE TUV & UL FULL RANGE `Y' TERM ONLY TUV & UL FULL RANGE TUV & UL 1nF max. `Y' TERM ONLY TUV & UL FULL RANGE TUV & UL 2.2nF max. `Y' TERM ONLY TUV & UL FULL RANGE TUV & UL FULL RANGE `Y' & `H' TERM ONLY TUV & UL FULL RANGE TUV & UL FULL RANGE `Y' & `H' TERM ONLY TUV & UL FULL RANGE `Y' & `H' TERM ONLY TUV ONLY 22nF max. `Y' & `H' TERM ONLY BAUART GEPRUFT Rheinland Product Safety TYPE APPROVED Safety Certified capacitors - Ordering information Ordering information - Safety Certified capacitors - Class SPU/SP ranges 1808 J A25 0102 J C T SP Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric codes Packaging Suffix code J = Ni barrier A25 = 250Vac First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following. <10pF B = 0.10pF C = 0.25pF D = 0.50pF C = C0G/NP0 T = 178mm (7") reel SP = Surge Protection capacitors (marked and approved) 1808 2211 2215 Y = FlexiCapTM termination base with Ni barrier (100% matte tin plating). RoHS compliant. 2211/2215 only A = Silver base with Ni barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. X = X7R A = C0G/NP0 (1B/NP0) AEC-Q200 > 10pF F = 1% G = 2% J = 5% K = 10% M = 20% Example: 0102 = 1.0nF R = 330mm (13") reel E = X7R (2B1) AEC-Q200 B = Bulk pack tubs or trays SPU = Surge Protection capacitors (un-marked parts are in accordance with, but not certified) H = FlexiCapTM termination base with Ni barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. Ordering information - Safety Certified capacitors - Class PY2/SY2 1808 J A25 0102 J X T PY2 Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric codes Packaging Suffix code J = Ni barrier A25 = 250Vac First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following. <10pF B = 0.10pF C = 0.25pF D = 0.50pF > 10pF F = 1% G = 2% J = 5% K = 10% M = 20% C = C0G/NP0 T = 178mm (7") reel PY2 = Safety tested Surge Protection capacitors (marked and approved) 1808 1812 Y = FlexiCapTM termination base with Ni barrier (100% matte tin plating). RoHS compliant. P = ProtectiCapTM FlexiCapTM termination base with Ni barrier, (100% matte tin plating). Example: 0102 = 1.0nF X = X7R A = C0G/NP0 (1B/NP0) AEC-Q200 E = X7R (2B1) AEC-Q200 R = 330mm (13") reel B = Bulk pack tubs or trays SY2 = Surge Protection capacitors (un-marked parts are in accordance with, but not certified) Ordering information - Safety Certified capacitors - Class B16/B17 ranges 2220 J A25 0102 J X T B16 Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric codes Packaging Suffix code 2220 J = Ni barrier A25 = 250Vac First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following. J = 5% K = 10% M = 20% E = X7R (2B1) AEC-Q200 T = 178mm (7") reel B16 = Type A: X1/Y2 B17 = Type B: X2 Y = FlexiCap termination base with Ni barrier (100% matte tin plating). RoHS compliant. TM A = Silver base with Ni barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. Example: 0102 = 1.0nF X = X7R 1000 pieces R = 330mm (13") reel 4000 pieces B = Bulk pack tubs or trays H = FlexiCapTM termination base with Ni barrier (Tin/lead plating with min. 10% lead). Not RoHS compliant. P = ProtectiCapTM FlexiCapTM termination base with Ni barrier, (100% matte tin plating). www.syfer.com | Phone: +44.1603.723300 | 39 250Vac Non Safety Rated AC Capacitors - C0G/NP0 & X7R Industry wide standard multilayer ceramic capacitors are supplied with a DC rating only. For AC use Surge and Safety capacitors with an AC rating of 250Vac have been available but the capacitance range is limited as a result of the strict impulse and VP requirements in the international standards. Knowles offers a solution in both our original and PSL range for operation up to 250Vac 60Hz continuous use provided for non-safety critical applications where extended capacitance ranges are required. Capacitance range Case sizes 0805 to 2220 are available in both X7R and C0G/NP0 dielectrics with capacitances of up to 120nF. The capacitance ranges are divided into four groups which are based on the voltage coefficient of capacitance, C0G/NP0 which has negligible capacitance shift with applied voltage and three subgroups of X7R. Type A with typical current flow of 0.093mA per nF @ 240V 50Hz, Type B with typical current flow of 0.082mA per nF @ 240V 50Hz and Type C with typical current flow of 0.06mA per nF @ 240V 50Hz. 250Vac Non Safety Rated AC capacitors - minimum/maximum capacitance values Chip size 0805 1206 1210 1808 1812 2220 C0G/NP0 1.0pF - 470pF 1.0pF - 1.2nF 4.7pF - 2.2nF 4.7pF - 2.2nF 10pF - 5.6nF 10pF - 10nF X7R - A 560pF - 1.5nF 1.5nF - 10nF 2.7nF - 22nF 2.7nF - 22nF 6.8nF - 56nF 12nF - 120nF X7R - B 1.8nF - 3.3nF 12nF 27nF 27nF 68nF - 82nF - X7R - C 3.9nF - 10nF 15nF - 47nF 33nF - 100nF 33nF - 100nF 100nF - 120nF - PSL X7R - A - 3.3nF - 10nF 10nF - 22nF - 10nF - 68nF 47nF - 120nF PSL X7R - C - 12nF - 22nF 27nF - 68nF - 82nF - 100nF - Note: Please see website for further details. Ordering information - 250Vac Non Safety Rated AC capacitors 1812 Y A25 0103 K X T Capacitance tolerance Dielectric codes Packaging <10pF B = 0.1pF C = 0.25pF D = 0.5pF C = C0G/NP0 Chip size Termination Voltage Capacitance in picofarads (pF) 0805 1206 1210 1808 1812 2220 Y = FlexiCapTM termination base with nickel barrier (100% matte tin plating). RoHS compliant. A25 = 250Vac 60Hz <10pF Insert a P for the decimal point, eg P300 = 0.3pF, 8P20 = 8.2pF. J = Silver base with nickel barrier (100% matte tin plating). RoHS compliant. 40 | Phone: +44.1603.723300 | www.syfer.com 10pF 1st digit is 0. 2nd and 3rd digits are significant figures of capacitance code. The 4th digit is number of 0's following eg. 0103 = 10nF 10pF F = 1% G = 2% J = 5% K = 10% M = 20% X = X7R J = PSL X7R T = 178mm (7") reel R = 330mm (13") reel B = Bulk pack tubs or trays 115Vac 400Hz capacitors - C0G/NP0, X7R 115Vac 400Hz capacitors for aerospace applications Syfer Technology has conducted reliability testing on standard surface mount ceramic capacitors in order to ensure their performance at 115Vac 400Hz and the associated voltage and frequency transients required by MIL-STD-704. Self heating will occur due to losses in the capacitor but has been measured at less than 25C rise with neutral mounting conditions at room temperature. Please note that the 115V 400Hz ranges are not RoHS 2011/65/EU compliant. 115Vac 400Hz capacitors - minimum/maximum capacitance values 0805 1206 1210 C0G/NP0 1pF - 330pF 1pF - 1.5nF 3.9pF - 3.9nF X7R 100pF - 4.7nF 100pF - 18nF 100pF - 39nF Dielectric 1808 1812 2220 4.7pF - 3.9nF 10pF - 10nF 10pF - 15nF 100pF - 39nF 150pF - 82nF 220pF - 100nF Maximum capacitance values Ordering information - 115Vac 400Hz capacitors 1206 Y A12 0103 J X T Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric codes Packaging Y = FlexiCapTM termination base with nickel barrier (100% matte tin plating). RoHS compliant. A12 = 115Vac First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following. <4.7pF H = 0.05pF B = 0.10pF C = 0.25pF D = 0.50pF C = C0G/NP0 X = X7R T = 178mm (7") reel 0805 1206 1210 1808 1812 2220 H = FlexiCap termination base with nickel barrier (Tin/ lead plating with min. 10% lead). Not RoHS compliant. TM J = Silver base with nickel barrier (100% matte tin plating). RoHS compliant. A = Silver base with nickel barrier (Tin/ lead plating with min. 10% lead). Not RoHS compliant. Example: 0103 = 10nF 4.7pF & <10pF B = 0.10pF C = 0.25pF D = 0.50pF R = 330mm (13") reel B = Bulk pack tubs or trays 10pF F = 1% G = 2% J = 5% K = 10% M = 20% www.syfer.com | Phone: +44.1603.723300 | 41 DWV chip range - C0G/NP0, X7R High Dielectric Withstand Voltage capacitors (DWV range) The DWV range is specifically designed for use in applications where a high Dielectric Withstand Voltage (DWV) is required. These parts have a continuous rated voltage of 500Vdc minimum and are 100% DWV tested at the specified voltages to ensure Flashover (arcing) across the surface does not occur. High dielectric withstand voltages (DWV) of 1.5kV and 2.5kV These ratings are based on an application of the DWV voltage for a period of up to 60 seconds (where the charging current is limited to 50mA) Case sizes: 1206, 1210, 1808, 1812, 2220 and 2225 C0G/NP0 and X7R dielectrics Capacitance values from 4.7pF to 120nF For full range information please see Syfer web site, or contact the Sales Office. DWV capacitors - minimum/maximum capacitance range 1.5kV 2.5kV C0G/NP0 1206 1210 1808 1812 2220 2225 4.7pF - 330pF 4.7pF - 1nF 4.7pF - 1.2nF 10pF - 2.2nF 100pF - 4.7nF 100pF - 5.6nF X7R 4.7pF - 3.9nF 4.7pF - 10nF 4.7pF - 12nF 10pF - 33nF 100pF - 100nF 100pF - 120nF C0G/NP0 4.7pF - 220pF 4.7pF - 560nF 4.7pF - 1nF 10pF - 1.5nF 100pF - 3.3nF 100pF - 3.9nF X7R 4.7pF - 1nF 4.7pF - 2.2nF 4.7pF - 2.7nF 10pF - 5.6nF 10pF - 15nF 100pF - 18nF Ordering information - DWV capacitors 1812 J 1K5 0820 K C T DWV Chip size Termination Dielectric Withstand Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric codes Packaging Suffix code 1206 1210 1808 1812 2220 2225 Y = FlexiCapTM termination base with nickel barrier (100% matte tin plating). RoHS compliant. First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following. <10pF B = 0.10pF C = 0.25pF D = 0.50pF C = C0G/NP0 X = X7R T = 178mm (7") reel Dielectric Withstand Voltage 1K5 = 1.5kV 2K5 = 2.5kV J = Silver base with nickel barrier (100% matte tin plating). RoHS compliant. 42 | Phone: +44.1603.723300 | www.syfer.com Example: 0820 = 82pF 10pF F = 1% G = 2% 10pF J = 5% K = 10% M = 20% R = 330mm (13") reel B = Bulk pack tubs or trays High Temperature capacitors - X8R The X8R dielectric will operate from -55C to +150C, with a maximum capacitance change 15% (without applied voltage). The devices are available in sizes 0805 to 2225, with voltage ranges from 25V to 3kV and capacitance values from 270pF to 1.8F. The capacitors have been developed by Syfer to meet demand from various applications in the automotive and industrial markets and in other electronic equipment exposed to high temperatures. The increased use of electronics in automotive "under the hood" applications has created demand for this product range. The X8R range incorporates a specially formulated termination with a nickel barrier finish that has been designed to enhance the mechanical performance of these SMD chip capacitors in harsh environments typically present in automotive applications. For information, X8R dielectric contains lead within the ceramic and parts rated less than 250Vdc are not compliant with the EU 2011/65/ EU RoHS directive. Capacitance Range 270pF to 1.8F Insulation Resistance (IR) 100G or 1000secs (whichever is the less). Temperature Coefficient of Capacitance (TCC) 15% from -55C to +150C Dielectric Withstand Voltage (DWV) 2.5 x rated voltage for 51 seconds, 50mA charging current maximum. Dissipation Factor (DF) < 0.025 Ageing Rate 1% per decade (typical) X8R High Temperature capacitors - minimum/maximum cap. values according to the rated d.c. voltage 0805 Minimum capacitance value Maximum capacitance value according to the rated dc voltage 1206 1210 1808 1812 2220 2225 680pF 270pF 680pF 390pF 1nF 2.7nF 3.9nF 25V 56nF 180nF 330nF 470nF 680nF 1.5F 1.8F 50V 33nF 120nF 220nF 270nF 470nF 680nF 1F 100V 15nF 56nF 120nF 150nF 220nF 470nF 560nF 200/250V 10nF 33nF 68nF 82nF 120nF 220nF 330nF 500V 3.9nF 18nF 39nF 47nF 100nF 180nF 270nF 630V 1.8nF 3.9nF 10nF 12nF 33nF 150nF 180nF 1kV 1nF 2.2nF 4.7nF 5.6nF 18nF 39nF 56nF 1.2kV - 1.8nF 3.9nF 4.7nF 12nF 33nF 39nF 1.5kV - 1.2nF 2.2nF 2.7nF 8.2nF 22nF 27nF 2kV - 470pF 1.2nF 1.8nF 4.7nF 12nF 18nF 2.5kV - - - 1nF 2.7nF 6.8nF 10nF 3kV - - - 680pF 2.2nF 4.7nF 5.6nF = X8R ranges in yellow available as qualified AEC-Q200. Ordering information - X8R High Temperature capacitors 1206 Y 100 0473 K N T Capacitance in picofarads (pF) Capacitance tolerance Dielectric codes Packaging First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following. J = 5% K = 10% M = 20% N = X8R T = X8R AEC-Q200 Chip size Termination Voltage d.c. 0805 1206 1210 1808 1812 2220 2225 Y = FlexiCapTM termination base with nickel barrier (100% matte tin plating). RoHS compliant. 025 = 25V 050 = 50V 100 = 100V 200 = 200V 250 = 250V 500 = 500V 630 = 630V 1K0 = 1kV 1K2 = 1.2kV 1K5 = 1.5kV 2K0 = 2kV 2K5 = 2.5kV 3K0 = 3kV Example: 0473 = 47000pF = 47nF T = 178mm (7") reel R = 330mm (13") reel B = Bulk pack tubs or trays www.syfer.com | Phone: +44.1603.723300 | 43 Surface mount EMI Filters - E01 & E07 feedthrough capacitors The Syfer E01 and E07 ranges of feedthrough MLCC chip `C' filters are 3 terminal chip devices designed to offer reduced inductance compared to conventional MLCCs when used in signal line filtering. The filtered signal passes through the chip internal electrodes and the noise is filtered to the grounded side contacts, resulting in reduced length noise transmission paths. Available in C0G/NP0 and X7R dielectrics, with current ratings of 300mA, 1A, 2A, 3A and voltage ratings of 25Vdc to 200Vdc. Also available with FlexiCapTM termination which is strongly recommended for new designs. Commonly used in automotive applications, a range qualified to AECQ-200 is also available. E01 300mA, E07 1A/2A/3A E01/E07 C L Recommended solder lands C D B Earth track T E A W B2 Dimensions C B1 Signal track 0805 1206 1806 1812 L 2.0 0.3 (0.079 0.012) 3.2 0.3 (0.126 0.012) 4.5 0.35 (0.177 0.014) 4.5 0.35 (0.177 0.014) W 1.25 0.2 (0.049 0.008) 1.6 0.2 (0.063 0.008) 1.6 0.2 (0.063 0.008) 3.2 0.3 (0.126 0.012) T 1.0 0.15 (0.039 0.006) 1.1 0.2 (0.043 0.008) 1.1 0.2 (0.043 0.008) 2.0 0.3 (0.079 0.012) B1 0.60 0.2 (0.024 0.008) 0.95 0.3 (0.037 0.012) 1.4 0.3 (0.055 0.012) 1.45 0.35 (0.055 0.012) B2 0.3 0.15 (0.012 0.006) 0.5 0.25 (0.02 0.01) 0.5 0.25 (0.02 0.01) 0.75 0.25 (0.02 0.01) Notes: 1) 2) 3) 4) 0805 1206 1806 1812 A 0.95 (0.037) 1.20 (0.047) 1.2 (0.047) 2.65 (0.104) B 0.90 (0.035) 0.90 (0.035) 1.40 (0.055) 1.40 (0.055) C 0.30 (0.012) 0.60 (0.024) 0.80 (0.031) 0.80 (0.031) D 0.40 (0.016) 0.80 (0.031) 1.40 (0.055) 1.40 (0.055) E 0.75 (0.030) 1.0 (0.039) 1.0 (0.039) 2.05 (0.080) All dimensions mm (inches). Pad widths less than chip width gives improved mechanical performance. The solder stencil should place 4 discrete solder pads. The unprinted distance between ground pads is shown as dim E. Insulating the earth track underneath the filters is acceptable and can help avoid displacement of filter during soldering but can result in residue entrapment under the chip. Standard Range - E01 & E07 Feedthrough Capacitors E01 Type Chip Size Max Current Rated Voltage Dielectric C0G/NP0 25Vdc X7R C0G/NP0 50Vdc X7R C0G/NP0 100Vdc X7R C0G/NP0 200Vdc X7R E07 0805 1206 1806 0805 1206 1806 1812 300mA 300mA 300mA 1A 2A 2A 3A Minimum and maximum capacitance values 180pF-1.5nF 560pF-3.9nF 820pF-4.7nF 180pF-1.5nF 560pF-3.9nF 820pF-4.7nF - 470pF-100nF 5.6nF-330nF 3.9nF-560nF 820pF-100nF 10nF-330nF 22nF-560nF 560nF-1.8F 22pF-820pF 22pF-3.3nF 22pF-3.9nF 10pF-220pF 22pF-1nF 100pF-1.5nF - 560pF-68nF 4.7nF-220nF 3.3nF-330nF 1nF-68nF 10nF-220nF 22nF-330nF 330nF-1.5F 22pF-560pF 22pF-2.2nF 22pF-3.3nF 10pF-120pF 22pF-560pF 100pF-680pF - 560pF-27nF 1.8nF-100nF 3.3nF-180nF 1nF-27nF 10nF-100nF 22nF-180nF 180nF-820nF - 560pF-1.2nF 56pF-1nF - 15pF-180pF 56pF-470pF - - 2.7nF-56nF 3.9nF-100nF - 12nF-56nF 22nF-100nF 100nF-270nF Note: E07 25Vdc C0G/NP0 1206 and 1806 ranges in green, have maximum current of 1A. AEC-Q200 Qualified Range - E01 & E07 Feedthrough Capacitors - maximum capacitance values Type Chip Size C0G/NP0 50V X7R C0G/NP0 100V X7R 0805 E01 1206 1806 0805 E07 1206 820pF 1nF 2.2nF 220pF 1nF 1.5nF 47nF 100nF 200nF 47nF 100nF 200nF 560pF 1nF 2.2nF 120pF 560pF 680pF 15nF 15nF 68nF 15nF 15nF 68nF Note: For some lower capacitance parts, higher voltage rated parts may be supplied. Please refer to the table below. 44 | Phone: +44.1603.723300 | www.syfer.com 1806 Surface mount EMI Filters - E01 & E07 feedthrough capacitors Open board insertion loss performance in 50 system Open Board Performance Capacitance 0.1MHz 1MHz 10MHz 100MHz 1GHz Resonance Freq (MHz) approx. 10pF 22pF 33pF 47pF 68pF 100pF 150pF 220pF 330pF 470pF 560pF 680pF 820pF 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 33nF 47nF 68nF 100nF 150nF 220nF 330nF 470nF 560nF 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 2 4 6 8 10 13 16 18 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 2 3 5 8 12 14 17 20 24 26 30 33 36 39 0 0 0 0 0 0 0 0 1 2 3 4 5 7 9 12 14 18 21 24 27 31 34 38 41 45 48 52 55 60 65 0 0 1 2 3 5 8 12 15 18 20 22 24 27 31 34 39 46 50 48 45 43 40 40 40 40 40 40 40 40 40 7.5 16 22 28 41 28 24 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 2200 1600 1350 1150 900 800 700 600 500 425 350 300 260 220 200 170 135 110 90 80 65 56 40 34 30 28 24 17 15.5 14 12 E01 & E07 Insertion Loss 10 0 -10 Loss (db) -20 10pF - C0G 22pF - C0G 47pF - C0G 100pF - C0G 470pF - C0G 2.2nF - C0G 2.2nF - X7R 4.7nF - X7R 10nF - X7R 22nF - X7R 100nF - X7R 200nF - X7R -30 -40 -50 -60 -70 -80 0.00 0.01 0.1 1.0 10.0 100.0 1000.0 10000.0 100000.0 Frequency (MHz) Ordering Information - E01 & E07 feedthrough capacitors 1206 Y 100 0103 M X T E07 Chip Size Termination Voltage Capacitance in picofarads (pF) Tolerance Dielectric Packaging Type 0805 1206 1806 J = Nickel Barrier (Tin) *Y = FlexiCapTM (Tin - X7R only) A = (Tin/Lead) Not RoHS compliant. *H = FlexiCapTM (Tin/Lead) Not RoHS compliant. 025 = 25V 050 = 50V 100 = 100V 200 = 200V First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following M = 20% A = C0G/NP0 AEC-Q200 T = 178mm (7") reel E01 E07 C = C0G/NP0 R = 330mm (13") reel E = X7R AEC-Q200 Example: 0103 = 10000pF. B = Bulk X = X7R Note: *FlexiCapTM termination only available in X7R material. Please contact our Sales Office for any special requirements. Reeled quantities 178mm (7") reel 0805 1206 1806 3000 2500 2500 330mm (13") reel 0805 1206 1806 12000 10000 10000 www.syfer.com | Phone: +44.1603.723300 | 45 Surface mount EMI Filters - E03 X2Y Integrated Passive Components The Syfer X2Y Integrated Passive Component is a 3 terminal EMI chip device. When used in balanced line applications, the revolutionary design provides simultaneous line-to-line and line-to-ground filtering, using a single ceramic chip. In this way, differential and common mode filtering are provided in one device. For unbalanced applications, it provides ultra low ESL (equivalent series inductance). Capable of replacing 2 or more conventional devices, it is ideal for balanced and unbalanced lines, twisted pairs and dc motors, in automotive, audio, sensor and other applications. Available in sizes from 0805 to 1812, these filters can prove invaluable in meeting stringent EMC demands. Manufactured in the UK by Syfer Technology Limited under licence from X2Y Attenuators LLC. Dielectric X7R or C0G/NP0 Capacitance measurement At 1000hr point Temperature rating -55C to 125C Electrical configuration Multiple capacitance Typical capacitance matching Better than 5% (down to 1% available on request) Insulation resistance 100Gohms or 1000s (whichever is the less) Type Dielectric withstand voltage <200V 2.5 times rated Volts for 5 secs 500V 1.5 times rated Volts for 5 secs Charging current limited to 50mA Max. E03 Chip size Rated voltage 0805 1206 1410 1812 - - - - - - - - 560pF - 820pF 1.8nF - 3.3nF 6.8nF - 8.2nF 12nF - 15nF Dielectric C0G/NP0 X7R C0G/NP0 X7R C0G/NP0 X7R C0G/NP0 X7R C0G/NP0 X7R C0G/NP0 X7R 16Vdc 25Vdc 50Vdc 100Vdc 200Vdc 500Vdc 56nF - 68nF - 470nF 820nF 390pF - 470pF 1.2nF - 1.5nF 4.7nF - 5.6nF 8.2nF - 10nF 390nF - 680nF 18nF - 47nF 56nF - 220nF 180nF - 400nF 10pF - 330pF 22pF - 1.0nF 100pF - 3.9nF 820pF - 6.8nF 470pF - 15nF 1.5nF - 47nF 4.7nF - 150nF 8.2nF - 330nF 820pF - 5.6nF - 22pF - 1.0nF 100pF - 3.3nF - 820pF - 33nF 1.2nF - 120nF 2.7nF - 180nF - - - 820pF - 3.9nF - - - 2.7nF - 100nF Notes: 1) For some lower capacitance parts, higher voltage rated parts may be supplied. AEC-Q200 range (E03) - capacitance values Chip size 50Vdc 100Vdc 0805 1206 1410 1812 C0G/NP0 390pF - 470pF 1.2nF - 1.5nF 4.7nF - 5.6nF 8.2nF - 10nF X7R 18nF - 33nF 56nF - 150nF 180nF - 330nF 390nF- 560nF C0G/NP0 10pF - 330pF 22pF - 1.0nF 100pF - 3.9nF 820pF - 6.8nF X7R 470pF - 15nF 1.5nF - 47nF 4.7nF - 150nF 8.2nF - 330nF L T W B2 B1 46 | Phone: +44.1603.723300 | www.syfer.com 0805 1206 1410 1812 L 2.00.3 (0.080.012) 3.20.3 (0.1260.012) 3.60.3 (0.140.012) 4.50.35 (0.180.014) W 1.250.2 (0.050.008) 1.600.2 (0.0630.008) 2.50.3 (0.10.012) 3.20.3 (0.1260.012) T 1.00.15 (0.040.006) 1.10.2 (0.0430.008) 2.0 max. (0.08 max.) 2.1 max. (0.08 max.) B1 0.50.25 (0.020.01) 0.950.3 (0.0370.012) 1.200.3 (0.0470.012) 1.40.35 (0.060.014) B2 0.30.15 (0.0120.006) 0.50.25 (0.020.01) 0.50.25 (0.020.01) 0.750.25 (0.030.01) Notes: 1) All dimensions mm (inches). 2) Pad widths less than chip width gives improved mechanical performance. 3) The solder stencil should place 4 discrete solder pads. The un-printed distance between ground pads is shown as dim E. 4) Insulating the earth track underneath the filters is acceptable and can help avoid displacement of filter during soldering but can result in residue entrapment under the chip. Surface mount EMI Filters - E03 X2Y Integrated Passive Components Recommended solder lands D B E A C 0805 1206 1410 1812 A 0.95 (0.037) 1.2 (0.047) 2.05 (0.08) 2.65 (0.104) B 0.9 (0.035) 0.9 (0.035) 1.0 (0.040) 1.4 (0.055) C 0.3 (0.012) 0.6 (0.024) 0.7 (0.028) 0.8 (0.031) D 0.4 (0.016) 0.8 (0.031 ) 0.9 (0.035) 1.4 (0.055) E 0.75 (0.030) 1.0 (0.039) 1.85 (0.071) 2.05 (0.080) Component Advantages Disadvantages Applications Chip capacitor Industry standard Requires 1 per line High inductance Capacitance matching problems By-pass Low frequency 3 terminal feedthrough Feedthrough Lower inductance Current limited Feedthrough Unbalanced lines High frequency Syfer X2Y Integrated Passive Component Very low inductance Replaces 2 (or 3) components Negates the effects of temperature, voltage and ageing Provides both common mode and differential mode attenuation Can be used on balanced & unbalanced lines Care must be taken to optimise circuit design By-pass Balanced lines High frequency dc electric motors Unbalanced lines Audio amplifiers CANBUS Filtering application Decoupling application A INPUT 1 A SIGNAL C1 C1 C2 GROUND C1 C1 B 0 0 -10 -10 Insertion loss (dB) Insertion loss (dB) RETURN B INPUT 2 -20 -30 -40 -50 -60 -70 0.1 47nF 27pF 100nF 100pF 220nF 470pF 400nF 1nF 680nF 10nF 1 10 100 Frequency (MHz) 1000 470pF 1nF -20 -30 -40 -50 47nF 10nF -60 100nF -70 1 5000 10 100 1000 5000 Frequency (MHz) Ordering Information - X2Y IPC range 1812 Chip Size 0805 1206 1410 1812 Y 100 0334 M X T E03 Termination Voltage Capacitance in picofarads (pF) C1 Tolerance Dielectric Packaging Type J = Nickel Barrier (Tin) *Y = FlexiCapTM (Tin - X7R only) A = (Tin/Lead) Not RoHS compliant. *H = FlexiCapTM (Tin/Lead) Not RoHS compliant. 016 = 16V 025 = 25V 050 = 50V 100 = 100V 200 = 200V 500 = 500V M = 20% A = C0G/NP0 AEC-Q200 T = 178mm (7") reel C = C0G/NP0 R = 330mm (13") reel Syfer X2Y Integrated Passive Component First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following Example: 0334=330nF. Note: C1 = 2C2 (Tighter tolerances may be available on request). E = X7R AEC-Q200 B = Bulk X = X7R Note: *FlexiCapTM termination only available in X7R material. Please contact the sales office for any special requirements. Reeled quantities 178mm (7") reel 0805 1206 1410 1812 3000 2500 2000 1000 330mm (13") reel 0805 1206 1410 1812 12000 10000 8000 4000 www.syfer.com | Phone: +44.1603.723300 | 47 Ceramic chip capacitors - Packaging information Reel dimensions mm (inches) 20.2(0.795) min Plastic carrier tape T 0.5(0.02) 1.5(.06) min Product identifying label 13(0.512) Tape and reel packing of surface mounting chip capacitors for automatic placement are in accordance with IEC60286-3. A 60(2.36) min G Top tape 178mm (7") or 330mm (13") dia. reel 8 or 12mm nominal Embossment Peel force The peel force of the top sealing tape is between 0.2 and 1.0 Newton at 180. The breaking force of the carrier and sealing tape in the direction of unreeling is greater than 10 Newtons. Symbol Description 178mm reel 330mm reel A Reel diameter 178 (7) 330 (13) G Reel inside width 8.4 (0.33) 12.4 (0.49) T Reel outside width 14.4 (0.56) max 18.4 (0.72) max Tape dimensions Feed direction T D0 P0 Sealing tape P2 E F K0 t1 W B0 D1 P1 Embossment Cavity centre lines A0 Dimensions mm (inches) Symbol Description A0 B0 K0 Width of cavity Length of cavity Depth of cavity W Width of tape 8.0 (0.315) F Distance between drive hole centres and cavity centres 3.5 (0.138) E Distance between drive hole centres and tape edge P1 Distance between cavity centres P2 Axial distance between drive hole centres and cavity centres 2.0 (0.079) P0 Axial distance between drive hole centres 4.0 (0.156) D0 Drive hole diameter D1 Diameter of cavity piercing T Carrier tape thickness t1 Top tape thickness 48 | Phone: +44.1603.723300 | www.syfer.com 8mm tape 12mm tape Dependent on chip size to minimize rotation 12.0 (0.472) 5.5 (0.213) 1.75 (0.069) 4.0 (0.156) 8.0 (0.315) 1.5 (0.059) 1.0 (0.039) 1.5 (0.059) 0.3 (0.012) 0.1 (0.004) 0.4 (0.016) 0.1 (0.004) 0.1 (0.004) max Ceramic Chip Capacitors - Packaging Information Missing components The number of missing components in the tape may not exceed 0.25% of the total quantity with not more than three consecutive components missing. This must be followed by at least six properly placed components. Leader and Trailer END START Identification Each reel is labelled with the following information: manufacturer, chip size, capacitance, tolerance, rated voltage, dielectric type, batch number, date code and quantity of components. 40 empty sealed embossments minimum length is quantity dependent TRAILER COMPONENTS 20 sealed embossments minimum LEADER 400mm min. Component orientation Tape and reeling is in accordance with IEC 60286 part 3, which defines the packaging specifications of leadless components on continuous tapes. Notes: 1) IEC60286-3 states Ao < Bo (see tape dimensions on page 48). 2) Regarding the orientation of 1825 and 2225 components, the termination bands are right to left, NOT front to back. Please see diagram. Orientation of 1825 & 2225 components Outer Packaging Product identifying label T Outer carton dimensions mm (inches) max. Reel Size No. of reels L W T 178 (7.0) 1 185 (7.28) 185 (7.28) 25 (0.98) 178 (7.0) 4 190 (7.48) 195 (7.76) 75 (2.95) 330 (13.0) 1 335 (13.19) 335 (13.19) 25 (0.98) W L Note: Labelling of box and reel with bar codes (Code 39) available by arrangement. Reel quantities Chip size Max. chip thickness Reel quantities 0402 0505 0603 0805 1111 1206 1210 1410 1808 1812 1825 2211 2215 2220 2225 0.5mm 1.3mm 0.8mm 1.3mm 1.8mm 1.6mm 2.0mm 2.0mm 2.0mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 0.02" 0.05" 0.03" 0.05" 0.07" 0.06" 0.08" 0.08" 0.08" 0.1" 0.1" 0.1" 0.1" 0.1" 0.1" 500 750 500 500/ 1000 500/ 1000 2000 - 4000 2000/ 4000 2000/ 4000 178mm (7") 10000 2500 4000 3000 1000 2500 2000 2000 1500 500/ 1000 330mm (13") - - 16000 12000 - 10000 8000 8000 6000 2000/ 4000 Notes: 1) The above quantities per reel are for the maximum manufactured chip thickness. Thinner chips can be taped in larger quantities per reel. 2) Where two different quantities are shown for the same case size, please contact the Sales Office to determine the exact quantity for any specific part number. Bulk packing - tubs Product identifying label Chips are supplied in rigid re-sealable plastic tubs together with impact cushioning wadding. Tubs are labelled with the details: chip size, capacitance, tolerance, rated voltage, dielectric type, batch number, date code and quantity of components. Caution label H Dimensions mm (inches) H 60 (2.36) D 50 (1.97) D www.syfer.com | Phone: +44.1603.723300 | 49 Radial Leaded Capacitors - C0G/NP0, X7R Syfer Technology produces a wide range of dipped radial leaded capacitors. These are available in rated voltages of 50V up to 6kV. Although our catalogue range extends to 6kV, we are able to offer a capability for specials up to 12kV. Our larger case sizes and high voltage versions are particularly in demand, especially for mil/aero and medical power supply applications. Please contact our Sales Office to discuss any special requirements. High working voltage - up to 12kVdc Large case sizes RoHS compliant versions Tin-lead plated wire option to reduce tin whiskers (quote suffix A97 for 8111 to 8141 & A31 for 8151, 8161, 8171). 8111M Min. cap values 50/63V 100V 200/ 250V 500V 630V 1kV 1.2kV 1.5kV 2kV 2.5kV 3kV 4kV 5kV 6kV 8kV 10kV 12kV 8111N 8121M 8121N 8121T 8131M 8131M T= 6.3mm 8131T 8141M 8151M 8151M T= 6.3mm 8161M 8161M T= 7.0mm 8171M 8171M T= 7.0mm - C0G/NP0 4.7pF 4.7pF 4.7pF 4.7pF 4.7pF 4.7pF - 10pF 4.7pF 10pF - 27pF - 47pF X7R 100pF 100pF 100pF 100pF 330pF 100pF - 150pF 100pF 470pF - 1.0nF - 1.8nF - C0G/NP0 5.6nF 5.6nF 33nF 33nF 33nF 220nF - 100nF 220nF 330nF - 680nF - 1.0F - X7R 220nF 220nF 1.0F 1.0F 1.0F 3.3F - 2.2F 4.7F 10F - 15F - 22F C0G/NP0 2.2nF 2.2nF 18nF 18nF 18nF 82nF - 47nF 82nF 270nF - 470nF - 680nF - X7R 100nF 100nF 680nF 680nF 680nF 2.7F - 1.5F 2.7F 5.6F - 10F - 15F - C0G/NP0 1.0nF 1.0nF 8.2nF 8.2nF 8.2nF 47nF 68nF 22nF 47nF 120nF 180nF 270nF 330nF 390nF 560nF X7R 56nF 56nF 330nF 330nF 330nF 1.5F - 680nF 1.5F 3.3F - 5.6F - 10F - C0G/NP0 680pF 680pF 6.8nF 6.8nF 6.8nF 33nF 47nF 15nF 33nF 82nF 120nF 180nF 270nF 270nF 470nF X7R 15nF 15nF 150nF 150nF 150nF 820nF - 330nF 820nF 1.0F - 1.8F - 3.3F - C0G/NP0 560pF 560pF 3.9nF 3.9nF 3.9nF 22nF 39nF 10nF 22nF 68nF 100nF 120nF 180nF 220nF 390nF X7R 12nF 12nF 100nF 100nF 100nF 390nF - 180nF 470nF 680nF - 1.2F - 2.2F - C0G/NP0 180pF 180pF 2.2nF 2.2nF 2.2nF 18nF 27nF 6.8nF 18nF 47nF 82nF 82nF 150nF 150nF 270nF X7R 10nF 10nF 47nF 47nF 47nF 150nF - 100nF 150nF 180nF - 390nF - 1.0F - C0G/NP0 120pF 120pF 1.5nF 1.5nF 1.5nF 12nF 22nF 4.7nF 12nF 33nF 56nF 68nF 100nF 100nF 180nF X7R - - 10nF 10nF 10nF 100nF - 33nF 100nF 150nF - 220nF - 470nF - C0G/NP0 82pF 82pF 820pF 820pF 820pF 6.8nF 12nF 2.7nF 6.8nF 22nF 39nF 39nF 68nF 68nF 120nF X7R - - 6.8nF 6.8nF 6.8nF 68nF - 22nF 68nF 100nF - 150nF - 330nF - C0G/NP0 39pF 39pF 390pF 390pF 390pF 4.7nF 6.8nF 1.5nF 4.7nF 10nF 18nF 22nF 39nF 39nF 68nF X7R - - 4.7nF 4.7nF 4.7nF 33nF - 10nF 47nF 47nF - 82nF - 150nF - C0G/NP0 - - 220pF 220pF 220pF 2.2nF 3.9nF 820pF 2.2nF 6.8nF 12nF 12nF 22nF 22nF 39nF X7R - - - - - 12nF - 3.3nF 12nF 33nF - 68nF - 100nF - C0G/NP0 - - 150pF 150pF 150pF 1.8nF 2.7nF 560pF 1.8nF 4.7nF 8.2nF 10nF 18nF 15nF 27nF X7R - - - - - 8.2nF - 2.7nF 10nF 22nF - 47nF - 82nF - C0G/NP0 - - - - - 820pF 1.5nF 270pF 820pF 1.8nF 3.3nF 4.7nF 6.8nF 8.2nF 15nF X7R - - - - - 5.6nF - 2.2nF 5.6nF 6.8nF - 15nF - 33nF - C0G/NP0 - - - - - 560pF 1.0nF 180pF 560pF 1.5nF 2.2nF 2.7nF 4.7nF 5.6nF 10nF X7R - - - - - 4.7nF - 1.2nF 4.7nF 5.6nF - 10nF - 22nF - C0G/NP0 - - - - - 390pF 680pF 120pF 390pF 1.0nF 1.5nF 1.8nF 3.3nF 3.9nF 6.8nF X7R - - - - - 2.7nF - 1.0nF 2.7nF 4.7nF - 8.2nF - 15nF - C0G/NP0 - - - - - - - - - 150pF - 330pF - 680pF - X7R - - - - - - - - - 1.5nF - 4.7nF - 6.8nF - C0G/NP0 - - - - - - - - - 100pF - 180pF - 470pF - X7R - - - - - - - - - 1.0nF - 2.2nF - 4.7nF - C0G/NP0 - - - - - - - - - 68pF - 120pF - 220pF - X7R - - - - - - - - - 820pF - 1.2nF - 2.2nF - 8111M 8111N 8121M 8121N 8121T 8131M 8131M T= 6.3mm 8131T 8141M 8151M 8151M T= 6.3mm 8161M 8161M T= 7.0mm 8171M 8171M T= 7.0mm Note: T = Maximum thickness. 50 | Phone: +44.1603.723300 | www.syfer.com Radial Leaded Capacitors - Packaging information Dimensions - Radial Leaded capacitors Width Height Thickness Lead Space Lead Diameter Pattern (X) max. mm (inches) (Y) max. mm (inches) (Z) max. mm (inches) (S) mm (inches) (d) mm (inches) 8111M A 3.81 (0.15) 5.31 (0.21) 2.54 (0.10) 2.54 0.4 (0.1 0.016) 0.5 0.05 (0.02 0.002) 8111N B 3.81 (0.15) 5.31 (0.21) 2.54 (0.10) 5.08 0.4 (0.2 0.016) 0.5 0.05 (0.02 0.002) 8121M A 5.08 (0.20) 6.58 (0.26) 3.18 (0.125) 2.54 0.4 (0.1 0.016) 0.5 0.05 (0.02 0.002) 8121N B 5.08 (0.20) 6.58 (0.26) 3.18 (0.125) 5.08 0.4 (0.2 0.016) 0.5 0.05 (0.02 0.002) 8121T B 10.16 (0.40) 5.80 (0.23) 4.50 (0.18) 7.62 0.4 (0.30 0.016) 0.5 0.05 (0.02 0.002) 8131M A 7.62 (0.30) 9.12 (0.36) 3.81/6.30 (0.15/0.25) 5.08 0.4 (0.2 0.016) 0.5 0.05 (0.02 0.002) 8131T B 10.16 (0.40) 9.12 (0.36) 4.50 (0.18) 7.62 0.4 (0.30 0.016) 0.5 0.05 (0.02 0.002) 8141M A 10.16 (0.40) 11.66 (0.46) 3.81 (0.15) 5.08 0.4 (0.2 0.016) 0.5 0.05 (0.02 0.002) 8151M A 12.70 (0.50) 14.20 (0.56) 5.08/6.30 (0.20/0.25) 10.1 0.4 (0.4 0.016) 0.6 0.05 (0.025 0.002) 8161M A 18.50 (0.73) 16.50 (0.65) 6.00/7.00 (0.24/0.28) 14.5 0.5 (0.57 0.02) 0.6 0.05 (0.025 0.002) 8165M A 19.00 (0.75) 19.00 (0.75) 4.25 (0.17) 17.5 0.5 (0.67 0.02) 0.6 0.05 (0.025 0.002) 8171M A 25.00 (0.98) 20.00 (0.79) 6.00/7.00 (0.24/0.28) 21.0 0.6 (0.83 0.024) 0.6 0.05 (0.025 0.002) Marking information Pattern A All encapsulated capacitors are marked with:- Capacitance value, tolerance, rated d.c. voltage, dielectric, and where size permits the Syfer Technology `S' logo. Pattern B X Z X Z Y Y Seating Seating Plane Plane Example: 1000pF 10% 50V 2X1 dielectric 5.0 (0.2) min. 5.0 (0.2) min. 1.5 (0.6) max. Capacitance S Logo d S d Note: Pattern A may be substituted with Pattern B at Syfer's discretion. Dielectric code Voltage code Capacitance tolerance code Ordering information - Radial Leaded capacitors 8111M 100 0102 J C Type No./ Size ref Voltage d.c. (marking code) Capacitance in picofarads (pF) Capacitance tolerance Dielectric Rel Release codes <10pF Insert a P for the decimal point as the second character. eg. 8P20 = 8.2pF <10pF D: 0.5pF F: 1.0pF 10pF J: 5% K: 10% M: 20% 27pF G: 2% (C0G/NP0 only). 8111M 8111N 8121M 8121N 8121T 8131M 8131T 8141M 8151M 8161M 8165M 8171M 050 063 100 200 250 500 630 1K0 1K2 1K5 2K0 2K5 3K0 4K0 5K0 6K0 8K0 10K 12K = 50V = 63V = 100V = 200V = 250V = 500V = 630V = 1kV = 1.2kV = 1.5kV = 2kV = 2.5kV = 3kV = 4kV = 5kV = 6kV = 8kV = 10kV = 12kV (C) (D) (E) (F) (Q) 10pF First digit is 0. Second and third digits are significant figures of capacitance code. Fourth digit is number of zeros eg. 0101 = 100pF C = C0G/NP0 (1B/CG; CG/BP) X = X7R (2R1) To Special Order B = 2X1 (BX) R = 2C1 (BZ) Suffix code Suffix code Used for specific customer requirements. C42 denotes RoHS compliant. A31 or A97 denote non-RoHS tin/lead wires. Suffix A97 for 8111 to 8141 & A31 for 8151, 8161, 8171. Notes: The voltage code may be replaced with the complete voltage (e.g. 1500V = 1K5V) at Syfer's discretion. Marking may be over both sides of the component as necessary. www.syfer.com | Phone: +44.1603.723300 | 51 Radial Leaded Capacitors - C0G/NP0 & X7R ranges C ap 8111M / 8111N an c X7R C0G/NP0 8121T X7R C0G/NP0 X7R e e Co d acit 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 200/250V 630V 100V 500V 50/63V 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 100V 500V 50/63V 2kV 1.5kV 1.2kV 1kV 500V 630V 100V 200/250V 50/63V 500V 1kV 630V 100V 50/63V 200/250V 2kV 1.5kV 1.2kV 500V 1kV 630V 200/250V 100V 50/63V 52 | Phone: +44.1603.723300 | www.syfer.com 200/250V 2kV 1.5kV 1.2kV 1kV 630V 100V 500V 50/63V 4p7 5p6 6p8 8p2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 395 475 565 685 825 106 126 156 200/250V 4.7pF 5.6 6.8 8.2 10pF 12 15 18 22 27 33 39 47 56 68 82 100pF 120 150 180 220 270 330 390 470 560 680 820 1.0nF 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10nF 12 15 18 22 27 33 39 47 56 68 82 100nF 120 150 180 220 270 330 390 470 560 680 820 1.0F 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10F 12 15F C0G/NP0 8121M / 8121N Radial Leaded Capacitors - C0G/NP0 & X7R ranges X7R e e 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 200/250V 100V 50/63V 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 100V 50/63V 200/250V 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 200/250V 100V 50/63V 200/250V 100V 50/63V 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 4.7pF 5.6 6.8 8.2 10pF 12 15 18 22 27 33 39 47 56 68 82 100pF 120 150 180 220 270 330 390 470 560 680 820 1.0nF 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10nF 12 15 18 22 27 33 39 47 56 68 82 100nF 120 150 180 220 270 330 390 470 560 680 820 1.0F 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10F 12 15F Co d C0G/NP0 an c X7R acit C0G/NP0 8131T C ap 8131M 4p7 5p6 6p8 8p2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 395 475 565 685 825 106 126 156 www.syfer.com | Phone: +44.1603.723300 | 53 Radial Leaded Capacitors - C0G/NP0 & X7R ranges C ap 8141M X7R C0G/NP0 X7R e Co d 4p7 5p6 6p8 8p2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 395 475 565 685 825 106 126 156 226 an c e acit 4.7pF 5.6 6.8 8.2 10pF 12 15 18 22 27 33 39 47 56 68 82 100pF 120 150 180 220 270 330 390 470 560 680 820 1.0nF 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10nF 12 15 18 22 27 33 39 47 56 68 82 100nF 120 150 180 220 270 330 390 470 560 680 820 1.0F 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10F 12 15 22F C0G/NP0 8151M 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 200/250V 100V 50/63V 12kV* 10kV* 8kV* 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 100V 50/63V 200/250V 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 200/250V 630V 100V 500V 50/63V 12kV 10kV 8kV 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 200/250V 100V 50/63V 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 6.3mm 54 | Phone: +44.1603.723300 | www.syfer.com Radial Leaded Capacitors - C0G/NP0 & X7R ranges X7R e e 12kV 10kV 8kV 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 200/250V 100V 50/63V 12kV 10kV 8kV 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 200/250V 100V 500V 50/63V 12kV 10kV 8kV 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 200/250V 100V 50/63V 12 10kV 8kV 6kV 5kV 4kV 3kV 2.5kV 2kV 1.5kV 1.2kV 1kV 630V 500V 200/250V 100V 50/63V 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0mm 7.0 Note: The highlighted parts may be defined as `dual-use' under export control legislation and as such may be subject to export licence restrictions. Please refer to page 9 for further details. 4.7pF 5.6 6.8 8.2 10pF 12 15 18 22 27 33 39 47 56 68 82 100pF 120 150 180 220 270 330 390 470 560 680 820 1.0nF 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10nF 12 15 18 22 27 33 39 47 56 68 82 100nF 120 150 180 220 270 330 390 470 560 680 820 1.0F 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10F 12 15 22F Co d C0G/NP0 an c X7R acit C0G/NP0 8171M C ap 8161M 4p7 5p6 6p8 8p2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 395 475 565 685 825 106 126 156 226 www.syfer.com | Phone: +44.1603.723300 | 55 Radial Leaded Capacitors - Packaging information Cropped leads Cropped leads between 4.0 (0.157) and 30.0 (1.18) are available to special order. Some of the preferred codes are listed below, together with the appropriate suffix code. Dimensions as for standard product except as specified. Suffix code - AE3 All radial ranges Suffix code - AE4 All radial ranges Suffix code - AD7 All radial ranges Suffix code - AD5 All radial ranges Lead length (L) 6 1 (0.236 0.04) from seating plane Lead length (L) 4 1 (0.162 0.04) from seating plane Lead length (L) 5 1 (0.2 0.04) from seating plane Lead length (L) 10 1 (0.4 0.04) from seating plane Dimensions mm (inches) Snap in leads Suffix code - AD2 Various forms of snap in leads (preformed) are available to special order, some of the preferred suffix codes are listed below. For PCB holes 1.2mm diameter Types 8131M Dimensions as for standard product except as specified. Dimensions Y = 10 (0.294) Max L = Min: 2.75 (0.108) Max: 3.50 (0.138) Suffix code - AD1 For PCB holes 0.9mm diameter Types 8121N and 8131M Y Seating plane L Y 4.20.5 40.5 50.5 Seating plane Dimensions Y = 8121N 8 (0.315) Max 8131M 10 (0.394) Max L = Min: 2.75 (0.108) Max: 3.50 (0.138) 6.60.5 L 8.8 Max Suffix code - AD3 50.5 60.5 Y For PCB holes 1.2mm diameter Types 8121N 6.0 +1.0 Seating plane L Dimensions Y = 8 (0.315) Max L = Min: 2.75 (0.108) Max: 3.50 (0.138) 4.20.5 50.5 6.60.5 7.6 Max Bandoliered suffix codes Dipped radial leaded with 2.54 and 5.08mm lead spacing can be supplied bandoliered on reels or in ammo boxes to special order. Some of the preferred suffix codes for bandoliered products are given below. For bandoliered products the minimum order quantity, pieces, is specified in the tables below, larger orders must be in multiples of this quantity. Dipped - straight and formed leads Suffix code Reel Product code H A H0 AMMO pack Lead style Diagram H H0 2500pcs 1000pcs 2000pcs 8111M Straight 2.54 crs A 191 - C01 C02 C11 8111M Straight 2.54 crs A 160.5 - C30 C31 C32 8111N Formed 5.08 crs B - 160.5 C01 C02 C11 8121M Straight 2.54 crs A 191 - C01 C02 C11 8121M Straight 2.54 crs A 160.5 - C30 C31 C32 8121N Formed 5.08 crs B - 160.5 C01 C02 C11 8131M Straight 5.08 crs A 191 - C01 C02 C11 8131M Straight 5.08 crs A 160.5 - C30 C31 C32 8121T and 8131T available in bulk packaging only. B Dipped - stand-off lead form Product code Y This style has been developed to provide a meniscus-free 0 seating plane with a stress relieving form for auto-insertion. H 56 | Phone: +44.1603.723300 | www.syfer.com Lead style Y max H0 2500pcs 1000pcs 2000pcs 8111N Formed 5.08 crs 7.5 160.5 C12 C23 C22 8111N Formed 5.08 crs 7.5 191 C13 C25 C24 8121N Formed 5.08 crs 8.5 160.5 C12 C23 C22 8121N Formed 5.08 crs 8.5 191 C13 C25 C24 Radial Leaded Capacitors - Packaging information A maximum of 3 consecutive components may be missing from the bandolier, followed by at least 6 filled positions. h P2 Components missing from the bandolier are included in the total quantity, whereby the number of missing components may not exceed 0.25% of this total per packing module. P W2 H1 At the beginning and end of a reel the bandolier will exhibit at least 10 blank positions. H0 W1 W0 H L W Minimum pull strength of product from tape = 5N. L2 Each reel/carton is provided with a label showing the: Manufacturer, product style, batch identification, quantity and date code. t F D0 P1 P0 In accordance with IEC 60286 part 2. Labelling with bar codes (code 39) is available on request. Dimensions mm (inches) Description Symbol Lead wire diameter d 2.5mm lead space 5mm lead space Tolerance 0.5 (0.02) 0.6 (0.025) 0.5 (0.02) 0.6 (0.025) 0.05 (0.002) Component pitch P 12.7 (0.5) 12.7 (0.5) 1.00 (0.04) Feed hole pitch P0 12.7 (0.5) 12.7 (0.5) 0.30 (0.01) Feed hole centre to lead P1 5.08 (0.2) 3.81 (0.15) 0.70 (0.03) Feed hole centre to component P2 6.35 (0.25) 6.35 (0.25) 0.70 (0.03) Lead spacing F 2.54 (0.10) 5.08 (0.20) +0.6 (0.02) -0.1 (0.004) Component alignment h 0 0 2.00(0.08) Tape width W 18.0 (0.70) 18.0 (0.70) +1.00 (0.04) -0.50 (0.02) Hold down tape width W0 6.0 (0.23) 6.0 (0.23) 0.30 (0.01) Hole position W1 9.0 (0.35) 9.0 (0.35) 0.50 (0.02) Hold down tape position W2 0.50 (0.02) 0.50 (0.02) Max Height to seating plane from tape centre (straight leads) (2) H 16 (0.63) to 20 (0.79) 16 (0.63) to 20 (0.79) As required Height to seating plane from tape centre (formed leads) (2) H0 16 (0.63) to 20 (0.79) 16 (0.63) to 20 (0.79) As required Height to top of component from tape centre H1 32.2 (1.26) 32.2 (1.26) Max Feed hole diameter D0 4.0 (0.16) 4.0 (0.16) 0.20 (0.008) Carrier tape plus adhesive tape thickness t 0.7 (0.03) 0.7 (0.03) 0.20 (0.008) Carrier tape thickness - 0.5 (0.02) 0.5 (0.02) 0.10 (0.004) Cut out component snipped lead length from tape centre L 11.0 (0.43) 11.0 (0.43) Max Lead wire protusion from hold down L2 2.0 (0.08) 2.0 (0.08) Max Bandoliered reels Bandoliered ammo packing 48 (1.88) 2 carton sizes 335.1) (13 851.0 301.0 52 max 3551.0 451.0 The adhesive tape faces outwards. The dispensing direction is as shown. For the protection of the components a paper inlay is inserted between the windings of the bandolier. At the end of the bandolier this paper inlay continues for at least a further two rotations. 230 (9.05) 24 (0.94) (2000 pcs) 115 (4.50) 20 dia. (0.79) (1000 pcs) 45 (1.77) www.syfer.com | Phone: +44.1603.723300 | 57 www.knowlescapacitors.com Knowles Capacitors designs, manufactures and sells special electronic components. Our products are used in military, space, telecom infrastructure, medical and industrial applications where function and reliability are crucial. Knowles (Cazenovia) 2777 Route 20 East, Cazenovia, NY 13035 USA Phone: +1 315 655 8710 Fax: +1 315 655 0445 DLISales@knowles.com Novacap 25111 Anza Drive, Valencia, CA 91355 USA Phone: +1 661 295 5920 Fax: +1 661 295 5928 NovacapSales@knowles.com Knowles (UK) Ltd Old Stoke Road, Arminghall, Norwich, NR14 8SQ UK Phone: +44 1603 723300 Fax: +44 1603 723301 SyferSales@knowles.com 9706/MLC/15/ (c) Copyright Knowles Capacitors, 2015 - design: creations@panpublicity.co.uk Voltronics Corporation 2250 Northwood Drive, Salisbury, MD 21801 USA Phone: +1 410 749 2424 Fax: +1 443 260 2263 VoltronicsSales@knowles.com