SVC234-TB-E - ON SEMICONDUCTOR

SVC234

No.6085-1/3

Features

•Low voltage (6.5V).

•Twin type varactor diode with good large-signal

characteristics for FM receiver electronic tuning use.

•Very small package permits SVC234-applied sets to

be compact and slim.

•Since available also in tape reel package, automatic

insertion is supported.

Electrical Connection

Specifications

Absolute Maximum Ratings at Tc=25°C

Parameter Symbol Conditions Ratings Unit

Reverse Voltage VR16 V

Junction Temperature Tj 125 °C

Storage Temperature Tstg −55 to +125 °C

Electrical Characteristics at Tc=25°C

Parameter Symbol Conditions Ratings Unit

min max

Breakdown Voltage V(BR)R IR=10µA16V

Reverse Voltage VRVR=10V 50 nA

Interterminal Capacitance ★C1V VR=1.0V, f=1MHz 62.02 68.79 pF

C4.5V VR=4.5V, f=1MHz 21.45 28.27 pF

C6.5V VR=6.5V, f=1MHz 13.42 16.03 pF

Quality Factor Q VR=3.0V, f=100MHz 60

Capacitance Ratio CRC1.0V / C6.5V 4.05 4.90

Matching Tolerance ∆Cm

VR=1.0, 4.5, 6.5V, f=1MHz (Cmax − Cmin) / Cmin

0.03

★ : Capacitance value per each diode.

Marking : SV

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Ordering number : ENN6085

SVC234

Varactor Diode for

FM Receiver Electronic Tuning Use

Package Dimensions

unit : mm

1169A

0.4

0.95 0.95

1.9

2.9

0.5

1.5

2.5

0.5

0.16

0 to 0.1

0.8

1.1

1 : Anode

2 : Anode

3 : Cathode

SANYO : CP

[SVC234]

41601 GI IM

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft's

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

Anode Anode

Cathode

Diffused Junction Type Silicon Diode

SVC234

No.6085-2/3

Address and Capacitance Value [pF]

Address C1.0V Address C3.0V Address C4.5V Address C6.5V

84 62.02 to 63.88 59 33.45 to 34.45 41 21.45 to 22.09 22 13.42 to 13.82

85 63.56 to 65.48 60 34.28 to 35.32 42 21.98 to 22.64 23 13.76 to 14.17

86 65.16 to 67.11 61 35.14 to 36.20 43 22.53 to 23.21 24 14.09 to 14.52

87 66.78 to 68.79 62 36.02 to 37.10 44 23.09 to 23.78 25 14.44 to 14.88

-------- --------------- 63 36.92 to 38.02 45 23.67 to 24.38 26 14.81 to 15.26

-------- --------------- 64 37.85 to 38.98 46 24.27 to 25.00 27 15.18 to 15.64

-------- --------------- 65 38.79 to 39.96 47 24.87 to 25.61 28 15.56 to 16.03

-------- --------------- -------- --------------- 48 25.50 to 26.26 -------- ---------------

-------- --------------- -------- --------------- 49 26.13 to 26.92 -------- ---------------

-------- --------------- -------- --------------- 50 26.78 to 27.59 -------- ---------------

-------- --------------- -------- --------------- 51 27.45 to 28.27 -------- ---------------

Interterminal Capacitance, C -- pF

Quality factor, Q

Rev erse Voltage, VR -- V

C, Q -- VR

012345678

1000

700

500

300

200

100

700

500

300

200

1000

100

IT00001

Quality factor Q (f=100MHz)

Interterminal capacitance C (f=1MHz)

SVC234

No.6085-3/3

C -- Ta

Capacitance Ratio

Ambient Temperature, Ta -- °C

1.06

1.05

1.04

1.03

1.02

1.01

1.00

0.99

0.98

0.97

0.96

--75 --50 --25 0 25 50 75 100 125 150

VR = 1.0V

4.5V

2.0V

3.0V

6.5V

IT00002

Vrf=20mVrms

f=1MHz

VR = 6.5V

3.0V

2.0V

4.5V

1.0V

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer's

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be expor ted without obtaining the expor t license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of April, 2001. Specifications and information herein are subject

to change without notice.